LM2902VDTBR2G - Quad 3-26V Low-Power Op Amp | onsemi
料号: LM2902VDTBR2G ✓ 量产中LM2902VDTBR2G 概述
An operational amplifier is an analog building block that compares an inverting input with a non-inverting input and amplifies the difference between them. A quad operational amplifier combines four amplifiers in one package, allowing a circuit to use multiple gain, filtering, buffering, or comparison stages while reducing board area and external component count. The LM2902VDTBR2G is therefore positioned between discrete transistor amplifiers and more specialized precision amplifier families.
The principal device characteristics are its four-amplifier configuration, 3 V to 26 V supply range, low-power operation, and 14-TSSOP surface-mount package. The TSSOP package is compact but requires careful PCB layout and adequate soldering-profile control. The extended-temperature characterization makes the part suitable for industrial and embedded equipment where ambient conditions may exceed ordinary consumer-commercial limits, subject to the final operating-temperature limits in the manufacturer datasheet.
Typical applications include sensor-signal conditioning, low-frequency active filters, audio preamplification, current-voltage conversion, general-purpose instrumentation, and process-control interfaces. The four amplifiers can implement cascaded stages, independent channels, or mixed signal-conditioning functions in one circuit board. The manufacturer datasheet should be consulted for input common-mode range, output swing, input bias current, noise, slew rate, supply-current behavior, and stability requirements before finalizing a design.
For single-supply designs, bias the signal path around a suitable reference voltage and verify that the input and output operating points remain inside the amplifier's common-mode and output-swing limits. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier sections should be configured according to the datasheet's recommended method. This page summarizes the cataloged LM2902VDTBR2G identity and combines it with practical design guidance, alternative-part screening, and sourcing guidance.
直接替换替代料: LM2902VDTBR2G ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM2902VDTBR2G (相同外形与封装尺寸) ——差异在于 Product Type.
LM2902DTBR2G
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LM2902VDTBR2G 最大额定值与电气特性
| Product Type | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Supply Voltage Range | 3 V to 26 V |
| Power Class | Low-power |
| Operating Temperature Class | Extended temperature |
| Input Type | True differential inputs |
| 封装 | 14-TSSOP |
| Package Type | Thin small-outline package |
| 安装类型 | Surface mount |
LM2902VDTBR2G thin small-outline package 引脚配置指南
LM2902VDTBR2G(thin small-outline package 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LM2902VDTBR2G.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LM2902VDTBR2G 适用于 6 应用s: Industrial Sensor Signal Conditioning, Audio Preamplification, Current-to-Voltage Conversion, Active Low-Frequency Filters, Process-Control Interfaces, Portable and Battery-Powered Electronics.
Industrial Sensor Signal Conditioning
The LM2902VDTBR2G is suitable for conditioning weak sensor signals in industrial equipment because its four amplifier sections provide multiple gain, filtering, and comparison stages in one 14-TSSOP package. The confirmed 3 V to 26 V single-supply range supports operation from low-voltage sensor rails through higher industrial rails, while the extended-temperature characterization supports demanding ambient environments. Design the front end around the sensor output level, verify the input common-mode range, and use one section for amplification before active filtering. Keep the high-impedance input path short and place filtering capacitors close to the amplifier pins. The low-power nature of the LM2902 family is valuable when four channels are continuously active, but the complete bias-current, offset, bandwidth, and noise limits must be taken from the onsemi datasheet before setting the gain.
推荐
Audio Preamplification
The LM2902VDTBR2G can implement preamplifier and filtering stages for line-level audio because it combines four general-purpose amplifiers in a compact surface-mount package. Its 3 V to 26 V supply capability allows operation from low-voltage portable systems to higher-voltage analog rails, subject to the exact device limits. Use separate sections for input gain, tone control, anti-alias filtering, and output buffering. In a single-supply design, establish the audio signal midpoint carefully so that the waveform does not approach the input common-mode or output-swing boundaries. The low-power LM2902 architecture is also appropriate for continuously powered equipment, but audio-path noise and distortion requirements should be checked against the datasheet rather than inferred from the general-purpose classification.
推荐
Current-to-Voltage Conversion
The LM2902VDTBR2G fits current-to-voltage conversion and transducer monitoring circuits where four amplifier channels can reduce the number of separate packages. A transimpedance configuration can convert sensor or shunt current into a voltage, while additional sections can amplify, offset, filter, and drive the result. The 3 V minimum supply supports low-voltage systems, while the 26 V upper catalog rating provides flexibility for industrial interfaces. When working with very small shunt currents, verify input bias current and offset voltage because they can create measurement errors. Keep the feedback resistor and input capacitance arrangement compact, provide stable reference connections for offsetting, and confirm output headroom across the full process-current range before committing the circuit to production.
推荐
Active Low-Frequency Filters
The LM2902VDTBR2G is well suited to first-order and higher-order active filters built from general-purpose amplifiers. Four independent sections allow a filter stage, buffer, gain stage, and output conditioning circuit to be consolidated in one 14-TSSOP package. Its low-power operation helps control heating in continuously active analog equipment, and the 3 V to 26 V supply range covers common single-supply architectures. Select resistor and capacitor values using the datasheet's small-signal and gain-bandwidth characteristics, then verify phase margin and load stability. Place feedback parts close to their associated amplifier pins and keep the unused amplifier sections in the manufacturer's recommended stable configuration. This approach is especially useful for removing sensor noise, reconstructing slow industrial signals, and shaping control-loop bandwidth.
推荐
Process-Control Interfaces
The LM2902VDTBR2G can support process-control interface circuitry that compares sensor signals, drives control inputs, and provides intermediate amplification. The extended-temperature characterization is useful in industrial cabinets and machinery where ambient temperature varies, and the compact 14-TSSOP package reduces PCB area in multi-loop controllers. Four channels can serve separate sensor inputs or distributed control functions. For a comparator-based design, confirm output saturation, input offset, and propagation behavior under the intended supply and loading. For analog control outputs, verify output swing and load-current capability. Add supply bypassing at each supply pin, use a defined reference node, and isolate high-impedance sensor wiring from switching nodes to prevent errors in the control loop.
推荐
Portable and Battery-Powered Electronics
The LM2902VDTBR2G is appropriate for portable and battery-powered analog modules because it provides four amplifiers while operating from a single supply as low as 3 V and is identified as a low-power device. This allows sensor interfaces, wake-up comparators, and small measurement chains to share one package. The extended-temperature option can support environments beyond typical consumer room temperature. Battery designs should still calculate average and peak supply current from the four channels, disable unused sections where the datasheet permits, and account for the load behavior of the output stages. Confirm the regulator headroom and allowable ripple at the amplifier pins, especially when the battery system also drives radio or digital circuitry.
推荐
推荐产品汇总
工程参考数据: LM2902VDTBR2G ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM2902DTBR2G | LM2902DTB | LM2902DT |
|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi |
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Input Type | True differential inputs | True differential inputs | True differential inputs | True differential inputs |
| Product Class | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
关键差异点
- Four amplifiers in one compact package (对比 Single-amplifier alternatives such as TS951IDT)
- Single-supply operating range (对比 LM2902DTB)
- 14-TSSOP board-space efficiency (对比 LM2902DTBR2G)
设计说明
Place the input, output, feedback, and bypass components directly beside their associated LM2902VDTBR2G pins. The 14-TSSOP lead pitch makes short electrical loops especially important, particularly around high-gain stages. Route the non-inverting reference and inverting feedback nets away from supply switching nodes and high-impedance sensor traces. A solid ground plane and short return path improve repeatability and reduce susceptibility to common-mode interference.
Decouple each supply connection locally with suitable high-frequency and bulk capacitance, following the capacitance recommendations in the onsemi datasheet. Keep the ceramic bypass capacitor adjacent to the supply pins and provide additional bulk capacitance near the regulator output when the wiring between the regulator and amplifier is long. Verify startup, supply ripple, and output settling across the complete 3 V to 26 V design range.
Do not assume that all LM2902 and LM324 variants are interchangeable. Check the package, pin assignment, supply limits, input common-mode range, output swing, output-current capability, noise, offset, and temperature grade before substituting a part. For single-supply operation, bias the signal around the midpoint and test the largest expected input and output excursions. Configure unused amplifier channels according to the manufacturer's recommended stable connection.
合规信息
Compliance attributes require confirmation from the current onsemi product documentation and material declaration for the exact ordering code.