Texas Instruments

LM2903PWR - Dual Open-Collector Comparator | Texas Instruments

MPN: LM2903PWR ✓ Hoạt động
±18V / 36V total Vdss 3.5nA maximum Id 8-pin TSSOP Package
MOQ: 1 |

LM2903PWR Tóm tắt

Texas Instruments LM2903PWR is a dual differential comparator with an open-collector output, rail-to-rail input capability, and a wide operating range of ±18V, or 36V total, in an 8-pin TSSOP package. The device contains two independent comparators, making it suitable for threshold detection, window comparison, industrial control, and signal-conditioning systems.

A comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input. In the larger semiconductor hierarchy, the LM2903 belongs to the comparator and analog IC family, where its differential inputs, open-collector outputs, and wide supply tolerance support robust sensing across industrial voltage ranges.

The LM2903PWR provides two independent comparison channels in one package. Its open-collector outputs can sink output current while remaining in a high-impedance state when inactive, allowing pull-up resistors to set the logic-high voltage and multiple comparator outputs to share a bus when wired appropriately. Rail-to-rail input operation extends the usable common-mode range toward the supply limits, which is valuable in battery-powered and industrial designs.

The improved LM2903B family associated with this device is specified for operation up to 38V, an ESD rating of 2kV HBM, input offset voltage as low as 0.37mV, input bias current as low as 3.5nA, supply current of 200µA per comparator, and response time of 1µs. These characteristics improve on older LM393-family performance while retaining the established LM2903 function and pin arrangement.

Typical uses include DC threshold monitors, overvoltage and undervoltage detection, sensor conditioning, window comparators, and industrial control logic. In a typical application, each comparator evaluates a signal against a reference generated by a resistor divider, while external pull-up resistors convert the open-collector output into a valid logic-high state.

Layout should keep input traces short, route sensitive comparison nodes away from switching-node currents, and place input and reference-network components close to the device. A common ground reference and stable bypass capacitance are essential because comparator decisions depend on the difference between two input voltages.

This page combines manufacturer device information, verified distributor listings, package identification, replacement analysis, and application-focused design guidance. It also distinguishes confirmed drop-in options from alternatives that cannot be installed on the same 8-pin TSSOP footprint without redesign.

Bộ thay thế dễ dàng lắp đặt cho LM2903PWR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2903PWR (cùng hình factor và footprint) — khác nhau ở Package, Input Bias Current, Operating Temperature Range, Comparator Type, Number of Channels.

Texas Instruments
Package: 8-pin TSSOP (PW)
Operating Temperature Range: -40°C to 125°C
Comparator Type: Dual differential voltage comparator
So sánh với LM2903PWR →
Texas Instruments
Input Bias Current: 50 nA maximum
So sánh với LM2903PWR →
Texas Instruments
Package: TSSOP (PW), 8 pins
Operating Temperature Range: -40 C to +125 C
Number of Channels: 2
So sánh với LM2903PWR →
Texas Instruments
Package: 8-pin TSSOP (PW)
Input Bias Current: 3.5 nA
Operating Temperature Range: -40 °C to +125 °C
So sánh với LM2903PWR →
Texas Instruments
Package: 8-TSSOP (PW)
Input Bias Current: 25 nA (typ)
Operating Temperature Range: -40C to +125C (automotive grade)
So sánh với LM2903PWR →
Texas Instruments
Package: 8-TSSOP, 4.40 mm width
So sánh với LM2903PWR →
Texas Instruments
Package: 8-TSSOP
Input Bias Current: 3.5 nA
So sánh với LM2903PWR →
Texas Instruments
Package: TSSOP (PW), 8 pins
Input Bias Current: 25 nA typical
Operating Temperature Range: -40°C to 125°C
So sánh với LM2903PWR →
Diodes Incorporated
Package: 8-pin TSSOP
Comparator Type: Dual differential comparator
Number of Channels: 2 channels
So sánh với LM2903PWR →
Texas Instruments
Package: 8-pin TSSOP (PW)
Operating Temperature Range: -40°C to +125°C
Number of Channels: 2 independent channels
So sánh với LM2903PWR →
Texas Instruments
Package: 8-TSSOP
Comparator Type: Dual differential general-purpose comparator
So sánh với LM2903PWR →

LM2903PWRG4

✅ Drop-In
Texas Instruments
📦 8-TSSOP
Dual differential comparator · 2 channels · Open collector · Rail-to-rail · 2 V to 36 V · 38 V · ±15 V / 30 V · 0.37 mV

Liên hệ để biết giá

Xem tài liệu →

LM2903PWR

✅ Drop-In
Texas Instruments
📦 8-TSSOP
Dual differential comparator · 2 channels · Open-collector · Rail-to-rail · ±18V / 36V total · Up to 38V · 0.37mV maximum · 3.5nA maximum

Liên hệ để biết giá

Xem tài liệu →

LM2903PWR Tỷ lệ tối đa & tính chất điện

Comparator Type Dual differential comparator
Number of Channels 2 channels
Kiểu đầu ra Open-collector
Input Common-Mode Range Rail-to-rail
Supply Voltage Range ±18V / 36V total
Maximum Rating of LM2903B Family Up to 38V
Input Offset Voltage 0.37mV maximum
Input Bias Current 3.5nA maximum
Điện áp cung cấp 200µA per comparator
Response Time 1µs
ESD Rating 2kV HBM
Hộp 8-pin TSSOP
Kiểu lắp đặt Surface mount
Trạng thái RoHS RoHS Compliant

Hướng dẫn cấu hình chân LM2903PWR 8-pin tssop

Cấu hình chân cho LM2903PWR (8-pin tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin tssop cho LM2903PWR

Không có dữ liệu chân cụ thể sẵn có cho LM2903PWR.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LM2903PWR phù hợp cho 6 Áp dụngs: Industrial Overvoltage Detection, Battery Voltage Window Monitor, Sensor Signal Conditioning, Control System Limit Detector, Automotive-Level Logic Interface, Analog-to-Digital Conversion Front End.

🏭

Industrial Overvoltage Detection

The LM2903PWR fits industrial voltage-monitoring circuits because its dual open-collector comparators can evaluate upper and lower system thresholds against separate references. Each channel compares a divided feedback voltage with a reference, and the open-collector outputs can directly pull down an alarm or interlock line. The associated LM2903B specifications include operation up to 38V, 0.37mV maximum input offset voltage, and 3.5nA maximum input bias current, helping preserve threshold accuracy. The 8-pin TSSOP package also reduces board area compared with two separate single comparators. Designers should account for input and output current, pull-up resistance, and the comparator’s 1µs family response time when defining fault-detection timing.

⚡

Battery Voltage Window Monitor

A dual LM2903PWR configuration is well suited to battery-pack window monitoring, where one channel can detect an upper limit and the other can detect a lower limit. The LM2903 family is associated with a ±18V, or 36V total, operating range, while the improved B-family information lists a maximum rating of up to 38V. Rail-to-rail input behavior helps the channels evaluate signals near supply-rail conditions, and the 200µA-per-comparator supply-current figure supports low-power monitoring. External pull-up resistors define the logic-high output voltage, allowing the open-collector fault signals to connect to a host controller. Resistor-divider tolerances and input offset voltage should be included in the threshold-error budget.

🧩

Sensor Signal Conditioning

The LM2903PWR can convert a slowly changing sensor signal into a sharp digital event by comparing the sensor against a locally generated reference. The rail-to-rail input characteristic is useful for sensors whose operating range approaches a supply rail, while the 0.37mV maximum offset and 3.5nA maximum bias-current figures from the improved LM2903B family reduce sensitivity to reference-network error. Each open-collector output can sink current directly or drive an external pull-up. The dual configuration supports two independently scaled sensor channels or a hysteresis window. Place the divider and reference components near the relevant input pins to minimize parasitic pickup and keep the sensor return path separated from high-current switching returns.

🔧

Control System Limit Detector

The LM2903PWR provides two independent decision channels for industrial control boards that must enforce operating limits or enable a machine only within a valid range. One comparator can detect an upper control-point crossing while the second handles the lower crossing, allowing a wired logic implementation with open-collector outputs. The family’s 1µs response time supports relatively prompt transitions, and the associated LM2903B specifications list 2kV HBM ESD protection and a maximum rating of up to 38V. The TSSOP package keeps the two channels close together on a compact control PCB. Designers should validate the pull-up voltage against the driven logic and account for simultaneous output transitions when defining fault-response behavior.

🚗

Automotive-Level Logic Interface

The dual open-collector architecture of the LM2903PWR is useful for interfacing a 12V-class electrical system to low-voltage digital logic. Two channels can monitor separate vehicle electrical conditions, while pull-up resistors connect the outputs to the logic rail required by the receiving device. The verified product information identifies the associated improved LM2903B family as a 2kV HBM ESD-rated device with maximum ratings up to 38V. A qualified production design should select the exact ordering option and temperature grade required by its automotive specification rather than assuming that every LM2903PWR ordering designation has the same qualification status. The TSSOP layout also supports compact electronic control-unit construction.

📺

Analog-to-Digital Conversion Front End

The LM2903PWR can serve as a fast threshold element ahead of an ADC or digital control input when an analog signal needs to be converted into an immediate event. Its differential inputs support comparison against a local reference, while the open-collector output can be pulled up to the receiving logic rail. The 1µs family response time helps minimize the interval between crossing the threshold and generating the digital indication. Two channels can handle separate thresholds, such as a warning and shutdown event, without requiring two packages. Keep the comparator input traces short, provide a low-noise reference, and avoid routing them near switching power stages. The input common-mode range and supply limits must be checked against the analog signal and transient environment.

Tóm tắt các sản phẩm được đề xuất

LM2901PW Single-comparator option when only one threshold channel is required Được sử dụng trong: Industrial Overvoltage Detection, Battery Voltage Window Monitor, Sensor Signal Conditioning, Control System Limit Detector, Automotive-Level Logic Interface, Analog-to-Digital Conversion Front End LM2901PWRG4 Single-comparator TSSOP alternative for lower-channel-count designs Được sử dụng trong: Industrial Overvoltage Detection, Battery Voltage Window Monitor, Sensor Signal Conditioning, Control System Limit Detector, Automotive-Level Logic Interface, Analog-to-Digital Conversion Front End
What is the LM2903PWR?
The LM2903PWR is a dual differential comparator with two open-collector outputs, rail-to-rail inputs, and a wide ±18V, or 36V total, operating range. According to the Texas Instruments LM2903 product page, it is a general-purpose comparator intended for industrial and general-purpose signal comparison. The device is packaged in an 8-pin TSSOP.
Where can I download the LM2903PWR datasheet PDF?
The official LM2903PWR technical information is available from the Texas Instruments product page at https://www.ti.com/product/LM2903. The LM2903PWR ordering entry is available at https://www.ti.com/product/LM2903/part-details/LM2903PWR. Use the manufacturer document for the complete pin description, electrical characteristics, timing information, and recommended application circuits.
Where can I find the LM2903PWR pinout?
The LM2903PWR pinout is documented in the manufacturer datasheet and part-details page for the 8-pin TSSOP package. The device contains two differential comparator channels and separate power connections. Before assigning PCB tracks, use the official pin-description table to confirm each input, output, supply, and ground connection and to preserve the exposed-pad and soldering requirements.
What are the key specifications of LM2903PWR that engineers should know?
The LM2903PWR is a dual, open-collector, rail-to-rail-input comparator in an 8-pin TSSOP package. The associated LM2903B family data lists operation up to 38V, 0.37mV maximum input offset voltage, 3.5nA maximum input bias current, 200µA supply current per comparator, a 1µs response time, and a 2kV HBM ESD rating.
What is the voltage range of the LM2903PWR?
The LM2903PWR supports a ±18V supply range, equivalent to 36V total, according to the verified Mouser product description. The improved LM2903B family has a maximum rating of up to 38V. These ratings apply to the device family rather than establishing a single recommended operating point, so designers should use the manufacturer limits for their exact ordering option.
How fast is the LM2903PWR comparator response?
The LM2903B family associated with LM2903PWR has a response time of 1µs. According to the Texas Instruments product information, this faster response improves suitability for threshold detection and control-loop functions while preserving the familiar open-collector interface. Actual system delay also depends on input overdrive, output pull-up resistance, load capacitance, and propagation variation.
Can LM2903PWR operate close to the supply rails?
Yes. The LM2903PWR has rail-to-rail input capability, allowing its differential inputs to operate across a common-mode range extending toward the supply rails. This is useful when sensing a signal near the upper or lower rail. The open-collector output still requires an external pull-up resistor, normally connected to the desired logic supply.
Why does the LM2903PWR output need a pull-up resistor?
The LM2903PWR output is open-collector, so the output transistor can pull the output low but cannot actively drive it high. An external pull-up resistor connects the output to a compatible logic rail and defines the high voltage. This arrangement also permits wired-open bus connections when the electrical design supports multiple comparators sharing one pull-up node.
Where to buy LM2903PWR online?
Use the Request a Quote form on this page to request LM2903PWR availability, current lead time, and an order quote from XAIPART. The exact manufacturer and suffix should be confirmed during quotation because LM2903PWR is also listed by multiple manufacturers, including Texas Instruments and ROHM Semiconductor, with the same TSSOP ordering code.
What is the price of LM2903PWR?
Submit the LM2903PWR manufacturer and package details through the Request a Quote form on this page for current pricing and availability. Pricing is quotation-dependent and can vary with manufacturer, quantity, delivery schedule, and packaging configuration. The Request a Quote response provides the current commercial terms without relying on an outdated list price.
What is the lead time for LM2903PWR?
Request the current LM2903PWR lead time through the Request a Quote form on this page. Lead time can vary by manufacturer, order quantity, and production status, particularly because both Texas Instruments and ROHM Semiconductor are associated with this ordering code. Provide the intended manufacturer, annual usage, and target delivery schedule with the request.
Is LM2903PWR in stock?
Current LM2903PWR inventory status should be confirmed through the Request a Quote form on this page. Specify whether the Texas Instruments or ROHM Semiconductor device is required and provide the required quantity. A quote response can include current availability, scheduled delivery, and the order basis for the exact MPN.
What can replace LM2903PWR?
The LM2903PWRG4 from Texas Instruments is a confirmed same-manufacturer alternative with the same LM2903PWR ordering function in the TSSOP package, while the ROHM Semiconductor LM2903PWR provides a cross-manufacturer option in the same 8-pin TSSOP format. Confirm electrical limits, temperature grade, lifecycle status, and manufacturer traceability before substituting either part.
Is LM2903PWR the same as LM2901PW?
No. LM2903PWR is a dual comparator, whereas LM2901PW is associated with the single-comparator LM2901 family. Although both are identified with PW-style TSSOP packaging in comparison records, the number of independent channels differs, so LM2901PW is not a functional or pin-to-pin drop-in replacement for LM2903PWR.
LM2903PWR vs LM2903PWRG4 - which is better for an industrial design?
LM2903PWRG4 is the better choice when the exact LM2903PWR circuit and TSSOP footprint must be retained while prioritizing the manufacturer’s G4 ordering designation. Both identifiers refer to the same dual open-collector comparator family and package format. The appropriate option depends on required qualification, traceability, lifecycle, and procurement terms for the finished equipment.
When should I choose LM2903PWR instead of a single comparator?
Choose LM2903PWR when a design needs two independent comparison functions, such as an upper and lower threshold in one window comparator. A single comparator such as the LM2901 family needs fewer channels but cannot implement that complete dual-threshold function by itself. LM2903PWR also consolidates two channels into one 8-pin TSSOP package.
What is the best ROHM equivalent for LM2903PWR?
The ROHM Semiconductor LM2903PWR is the identified cross-manufacturer option for the Texas Instruments LM2903PWR, with both listings describing an 8-pin TSSOP dual differential comparator with open-collector output. Before substitution, verify supply limits, common-mode range, offset voltage, response time, temperature grade, and pin assignment against the selected manufacturer’s datasheet.

Dữ liệu tham khảo kỹ thuật cho LM2903PWR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose LM2903PWR when the design needs two independent threshold decisions, especially where an open-collector interface, rail-to-rail input capability, and an 8-pin TSSOP package are important. Its dual channels can implement upper and lower limits, two sensor thresholds, or a window function without using two comparator packages. LM2903PWRG4 is the preferred option when the same Texas Instruments circuit and package are required but the G4 ordering designation is the intended procurement choice. The ROHM Semiconductor LM2903PWR can serve as a cross-manufacturer alternative, but its manufacturer-specific electrical limits, qualification, lifecycle status, and traceability must be checked before substitution. LM2901PW is appropriate only when one comparison channel is sufficient; it does not replace the two-channel LM2903PWR function.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM2903PWRG4 LM2903PWR
Package 8-TSSOP 8-TSSOP 8-TSSOP
Brand Texas Instruments Texas Instruments ROHM Semiconductor
Comparator Configuration Dual differential comparator Dual differential comparator Dual differential comparator
Output Type Open-collector Open-collector Open-collector
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail

Bảo phân biệt quan trọng

  • Two independent comparator channels in one compact package (vsLM2901PW)
  • Wide supply capability for industrial threshold detection (vsLM2903PWRG4)
  • Low-offset dual-channel sensing (vsLM2903PWR)

Ghi chú thiết kế

Keep the two differential input nets short and place their reference-divider components close to the relevant input pins. Route the pair together to minimize differential pickup from switching nodes and keep the comparator ground return continuous beneath the device. Because threshold accuracy depends on the difference between two input voltages, unequal input routing or a noisy shared ground can create errors larger than the specified 0.37mV offset in the improved LM2903B family.

Attach a suitable bypass capacitor from each device supply connection to the appropriate ground reference and place it immediately beside the package. Keep the pull-up return current separate from sensitive input-return paths where practical. The associated family specifies 200µA supply current per comparator, but total supply demand also includes input currents, pull-up load current, leakage, and output-transition effects.

Do not treat the open-collector output as a push-pull logic output. It can sink current when active but requires an external pull-up resistor to establish a high voltage. Confirm that the pull-up rail is compatible with every connected load, and do not exceed the device-family supply and absolute-maximum ratings. Verify the exact ordering option because the same LM2903PWR code is associated with more than one manufacturer.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The verified distributor search identifies LM2903PWR as RoHS Compliant. Automotive qualification and other compliance attributes were not established for the exact ordering option.

Tìm kiếm liên quan

lm2903pwr datasheet LM2903PWR datasheet pdf LM2903PWR pinout LM2903PWR footprint LM2903PWR equivalent LM2903PWR replacement LM2903PWR cross reference LM2903PWR vs LM2901PW LM2903PWR open collector comparator LM2903PWR price LM2903PWR stock Texas Instruments LM2903PWR LM2903 TSSOP application circuit LM2903PWR voltage window monitor LM2903PWR rail-to-rail input

Các bộ phận và thuật ngữ liên quan

Texas Instruments LM2903PWR LM2903 LM2903B LM2903PWRG4 ROHM Semiconductor LM2901PW LM2901PWRG4 dual differential comparator comparator analog integrated circuit semiconductor open-collector output rail-to-rail input common-mode range input offset voltage input bias current supply current response time TSSOP-8 surface mount industrial voltage monitoring battery window monitor sensor signal conditioning ESD HBM protection
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ