Texas Instruments

LM393BIDR - Dual Open-Collector Comparator | Texas Instruments

MPN: LM393BIDR ✓ Hoạt động
38 V Vdss 3.5 nA Id 8-pin SOIC (D) Package
MOQ: 1 |

LM393BIDR Tóm tắt

The Texas Instruments LM393BIDR is a dual general-purpose comparator with an open-collector output, commercial temperature rating of -40°C to +85°C, and an 8-pin SOIC package. Each channel compares two differential inputs and drives a low-voltage-compatible open-collector output that can pull a logic rail low. The device accepts differential input voltages up to ±38 V and its common-mode input range includes ground, making it suitable for sensing signals referenced to 0 V.

A comparator is an analog signal-conditioning IC that evaluates the voltage difference between its non-inverting and inverting inputs. When the non-inverting input rises above the inverting input, the associated output transistor turns off; when the relationship reverses, the output transistor turns on and pulls the output low. The LM393 family belongs to the comparator category within the broader analog IC and semiconductor hierarchies.

The B-version LM393 improves several parameters relative to the original LM393 family while remaining a drop-in replacement for LM293, LM393, and LM2903 A and V versions. Manufacturer product information lists a maximum input offset voltage of 2.5 mV, a response time of 1 µs, an input bias current of 3.5 nA, and supply current of 200 µA per comparator. The open-collector outputs are compatible with TTL, MOS, and CMOS logic.

Internally, the LM393 uses independent comparator channels referenced to a stable internal reference. Each output requires an external pull-up resistor because the open-drain transistor cannot actively drive a high state. The output sink current, low-level output voltage, and response performance are affected by the pull-up value, load capacitance, and the distance between the comparator and the receiving logic device.

Typical uses include DC overvoltage and undervoltage detection, zero-cross detection, battery monitoring, window comparators, and sensing switches for relays or MOSFETs. The wide differential input range also allows the device to compare signals that exceed the local supply voltage, provided the absolute maximum ratings and common-mode limits are respected.

When laying out a PCB, connect input traces away from switching nodes and route the pull-up resistor directly to the destination logic supply. Keep the input bias path short, decouple the supply pin close to the device, and verify the output pull-up voltage against the logic family being driven. Check the minimum operating supply and the absolute maximum supply rating separately because the input tolerance and supply rating are not interchangeable.

This page organizes pricing channels, drop-in alternatives, comparator pin assignments, and practical application guidance into a design-focused reference that helps engineers evaluate the LM393BIDR faster than a distributor parameter table alone.

Bộ thay thế dễ dàng lắp đặt cho LM393BIDR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM393BIDR (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature Range, Comparator Type, Response Time, Output Type.

Texas Instruments
Package: 8-SOIC, 0.154 in width and 3.90 mm width
Comparator Type: Dual differential comparator
Response Time: 0.3 µs
So sánh với LM393BIDR →
Texas Instruments
Package: 8-pin SOIC
Operating Temperature Range: -40 °C to +125 °C
Comparator Type: Dual differential comparator
So sánh với LM393BIDR →
Texas Instruments
Package: SOIC-8 (D suffix)
Operating Temperature Range: 0°C to +70°C (LM393 commercial grade)
Output Type: Open-collector, rail-to-rail input capable
So sánh với LM393BIDR →
Texas Instruments
Package: 8-pin SOIC
Comparator Type: Dual differential comparator
So sánh với LM393BIDR →
Texas Instruments
Package: SOIC-8 (D), 3.90 mm body width
Operating Temperature Range: 0 °C to +70 °C
Response Time: 1.3 µs (typical)
So sánh với LM393BIDR →
Texas Instruments
Package: 8-pin SOIC
Comparator Type: Differential
So sánh với LM393BIDR →
ROHM Semiconductor
Package: 8-pin SOP
Operating Temperature Range: -40 °C to +85 °C
Comparator Type: Dual general-purpose comparator
So sánh với LM393BIDR →

LM393DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
Texas Instruments · LM393DR · Dual Differential Comparator · 2 · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 1 mV

✓ Còn hàng

$0.11 / Đơn vị

Xem tài liệu →

LM2903DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
Dual differential comparator · 2 channels · 2 V to 36 V · Open-collector · 300 ns · 8-pin SOIC · Surface mount · -40 °C to +125 °C

Liên hệ để biết giá

Xem tài liệu →

LM393AIDR

✅ Drop-In
📦 8-pin SOIC (D)
LM393 A-version ordering option with the same footprint and comparator function; does not carry all LM393B improvements

📋 Tham chiếu thay thế (không có trong danh mục)

LM2903AIDR

✅ Drop-In
📦 8-pin SOIC (D)
LM2903 A-version with the same SOIC-8 pinout; verify temperature grade and input limits against the LM393BIDR

📋 Tham chiếu thay thế (không có trong danh mục)

LMV393DR

✅ Drop-In
📦 8-pin SOIC (D)
Lower-power CMOS comparator with a reduced supply-voltage range versus the bipolar LM393 family

📋 Tham chiếu thay thế (không có trong danh mục)

LM393BIDR Tỷ lệ tối đa & tính chất điện

Comparator Type Dual differential general-purpose comparator
Number of Channels 2 channels
Kiểu đầu ra Open-collector
Maximum Rated Supply Voltage 38 V
Differential Input Voltage Range -38 V to +38 V
Common-Mode Input Range Includes ground
Maximum Input Offset Voltage 2.5 mV
Typical Low Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
Điện áp cung cấp 200 µA per comparator
Response Time 1 µs
ESD Rating (HBM) 2 kV
Khoảng nhiệt độ hoạt động -40°C to +85°C
Output Compatibility TTL, MOS, and CMOS
Hộp 8-pin SOIC (D)
Kiểu lắp đặt Surface mount

Cấu hình chân LM393BIDR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Chân 1 OUT 1 — Open-collector output for comparator channel 1
Chân 2 IN 1- — Inverting input for comparator channel 1
Chân 3 IN 1+ — Non-inverting input for comparator channel 1
Chân 4 GND — Ground connection
Chân 5 IN 2+ — Non-inverting input for comparator channel 2
Chân 6 IN 2- — Inverting input for comparator channel 2
Chân 7 OUT 2 — Open-collector output for comparator channel 2
Chân 8 VCC — Positive supply connection

Ứng dụng tiêu biểu

LM393BIDR phù hợp cho 6 Áp dụngs: DC Overvoltage and Undervoltage Detection, Window Comparator for Limit Monitoring, Zero-Cross and AC Signal Detection, Motor and Relay Control Interface, Battery Pack Threshold Monitoring, Sensor Signal Conditioning and Limit Switching.

⚡

DC Overvoltage and Undervoltage Detection

The LM393BIDR fits battery and power-supply supervision because each channel compares a divided rail voltage with a reference and provides a pulled-up fault signal. A 38 V maximum rated supply and differential input range extending to -38 V and +38 V allow useful sensing ranges beyond the local supply, provided resistor dividers keep every pin within its rating. The 0.37 mV typical input offset voltage supports reasonably precise thresholds. One channel can monitor overvoltage and the other undervoltage, then drive a supervisor, relay, or system enable through the open-collector output.

🏭

Window Comparator for Limit Monitoring

Two LM393BIDR channels can create an upper and lower voltage window around a precision reference. Divide the monitored signal into separate upper and lower threshold networks, connect each comparator to the appropriate reference polarity, and pull both open-collector outputs into a wired logic function. The 1 µs response time is useful for signals that require prompt state changes. The principal design concern is offset error around the thresholds, so use matched resistor networks and provide adequate supply bypassing to keep the reference node quiet.

🌐

Zero-Cross and AC Signal Detection

The LM393BIDR can detect the point where an AC waveform crosses a reference level by comparing the signal with ground through one input and a bias node through the other. Its common-mode input range includes ground, making zero-volt sensing straightforward, while the wide differential input capability accommodates signals larger than the local logic supply. Because the output is open collector, a pull-up resistor can establish a clean logic-high pulse at the crossing. Keep the input network away from motor windings and use filtering if the detected edge must meet a specific timing requirement.

🔧

Motor and Relay Control Interface

An LM393BIDR channel can turn a control-level request into a low-side switch drive for a relay, solenoid driver, or MOSFET gate stage. The open-collector output can sink the control current directly when the load is compatible, or it can drive an additional N-channel MOSFET when higher current is required. The 200 µA supply current per comparator is low enough for continuously powered control boards. Always include a flyback path for inductive loads and confirm that the output sink current and pull-up voltage remain within the device ratings.

📱

Battery Pack Threshold Monitoring

The LM393BIDR supports low-power battery monitoring by comparing a resistor-divided pack voltage against a precision reference on each channel. The comparator consumes 200 µA per channel according to manufacturer product information, making it practical for always-on protection circuits. Its differential input tolerance allows the sensing network to operate across several cell voltages without exposing the inputs to the full pack voltage. Add a temperature-stable reference, verify the divider tolerance, and choose resistor values that limit divider current to avoid dominating the comparator input current.

🧩

Sensor Signal Conditioning and Limit Switching

The LM393BIDR can convert an analog sensor output into a hardware threshold event for thermistors, light sensors, pressure elements, or resistive dividers. Place the sensor network on one input and a reference on the other; the open-collector output then provides a pull-up-defined high level until the threshold is crossed. The dual-channel arrangement allows two limits or two independent sensor channels within one package. Minimize input trace length, keep high-impedance nodes away from switching nodes, and bypass the supply pin close to the package to avoid false threshold transitions.

What is the LM393BIDR?
The LM393BIDR is a Texas Instruments dual general-purpose differential comparator with open-collector outputs, an operating temperature range of -40°C to +85°C, and an 8-pin SOIC package. It compares two independent pairs of input voltages and provides logic-compatible low-level outputs. Manufacturer product information describes the B version as improved relative to the original LM393 and a drop-in replacement for LM293, LM393, and LM2903 A and V versions.
What are the key specifications of LM393BIDR?
The key LM393BIDR specifications include two comparator channels, open-collector outputs, a 38 V maximum rated supply voltage, differential input capability from -38 V to +38 V, and a common-mode input range that includes ground. Manufacturer product information also lists 0.37 mV typical input offset voltage, 3.5 nA input bias current, 200 µA supply current per comparator, a 1 µs response time, and a 2 kV HBM ESD rating.
Where can I download the LM393BIDR datasheet PDF?
The official LM393BIDR datasheet and ordering information are available from the Texas Instruments LM393 product page at https://www.ti.com/product/LM393. Use the manufacturer page for the current document revision, pin configuration, electrical characteristics, and ordering codes. The LM393BIDR is identified as the commercial-grade B-version device in an 8-pin SOIC package rated for -40°C to +85°C.
Where can I find the LM393BIDR pinout?
The LM393BIDR uses an 8-pin SOIC configuration with two independent comparator channels. Pins 1 and 7 are the open-collector outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is ground, and pin 8 is the supply connection. Use the pin-description table in the Texas Instruments LM393 datasheet when assigning PCB tracks and pull-up resistors.
What is the difference between LM393BIDR and LM393DR?
The LM393BIDR is the B-version, industrial-temperature LM393 offered in an 8-pin SOIC package, while the LM393DR is the standard LM393 ordering option. The manufacturer states that the LM393B is a drop-in replacement for the LM393. The B version carries improved offset, bias-current, supply-current, and response-time specifications, making it the preferred choice when the footprint already matches the SOIC-8 layout.
When should I choose LM393BIDR instead of LM393DR?
Choose the LM393BIDR when the board uses the 8-pin SOIC footprint and you want the improved B-version specifications. The B version provides 0.37 mV typical low input offset voltage, 3.5 nA input bias current, 200 µA supply current per comparator, and a 1 µs response time. Choose the LM393DR only when supply-chain continuity, an approved BOM entry, or an existing qualified component standard specifically requires that ordering option.
Can an LM2903 replace the LM393BIDR?
Yes, an LM2903 in the compatible 8-pin SOIC configuration can serve as a drop-in replacement because Texas Instruments identifies the LM393B as a drop-in replacement for LM2903 A and V versions. Verify the exact suffix, temperature range, supply limits, and pin arrangement for the candidate before substitution. The LM2903DR is listed here as the same-package alternative supported by the manufacturer family cross-reference.
What is the best drop-in replacement for LM393BIDR?
The best drop-in replacement is the part that matches both the 8-pin SOIC footprint and the open-collector output behavior. The LM393DR and LM2903DR are suitable same-package TI options, while the LMV393DR provides a lower-power CMOS implementation with a reduced supply-voltage range. Confirm input-voltage tolerance, output logic levels, response time, and operating temperature before approving any substitution in an existing design.
What can replace LM393BIDR in a low-voltage design?
The LMV393DR is a lower-power dual CMOS comparator in an 8-pin SOIC configuration that can replace the LM393BIDR in systems restricted to the LMV393 supply range. Its lower supply current suits battery-operated equipment, but its input and supply ratings are lower than those of the bipolar LM393 family. Verify rail-to-rail input behavior and output drive requirements rather than assuming exact equivalence.
Is LM393BIDR the same as LM393AM?
The LM393BIDR and LM393AM are not the same package option. LM393BIDR uses an 8-pin SOIC package, while LM393AM is associated with a through-hole DIP-style ordering option. They are related LM393 devices, but a package change requires a different PCB footprint and different pin spacing. Use the LM393AIDR ordering option when a drop-in SOIC-8 alternative is required and its specification record has been approved.
Do I need a pull-up resistor on LM393BIDR outputs?
Yes, each open-collector output requires an external pull-up resistor to establish the high logic state. When the output transistor is off, the resistor raises the node to the local logic supply; when the transistor is on, the node is pulled toward ground. Select the resistor so the pull-up current stays within the output sink-current rating, and place it close to the comparator or receiving logic input.
Where can I buy LM393BIDR online?
The LM393BIDR can be ordered through the XAIPART Request a Quote form on this page. The form is the appropriate channel for checking current unit pricing, available stock, minimum order quantity, and lead time for the exact 8-pin SOIC ordering code. Request a written quotation rather than relying on historical catalog pricing, which may not reflect current allocation.
What is the lead time for LM393BIDR?
Request the current LM393BIDR lead time through the Request a Quote form on this page, and specify the required quantity and preferred shipping destination. Lead time depends on manufacturer allocation, distributor inventory, and the quantity released for packaging. For design planning, treat any historical availability figure as informational and request a confirmed date for the current order.
Is LM393BIDR in stock?
Current LM393BIDR stock status is best confirmed through the Request a Quote form on this page. Provide the required quantity and whether you need factory-sealed tape-and-reel packaging or another authorized delivery format. Because availability changes by channel and region, request a current inventory confirmation tied to your purchase order instead of relying on an old catalog listing.
How should LM393BIDR be used for overvoltage detection?
Use one LM393BIDR channel to compare a divided battery or supply voltage against a precision reference. Connect the divided signal to the non-inverting input, the reference to the inverting input, and pull the open-collector output up to the system logic rail. The device tolerates differential inputs up to ±38 V, but the resistor divider must keep the actual pin voltages within their absolute maximum ratings.

Dữ liệu tham khảo kỹ thuật cho LM393BIDR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LM393BIDR when the design already uses an 8-pin SOIC footprint, needs two open-collector comparison channels, and benefits from the B version's 0.37 mV typical low offset, 3.5 nA input bias current, and 1 µs response time. It is particularly useful for industrial voltage-window, battery-limit, and zero-cross detection circuits where inputs may extend beyond the local supply voltage. The LM393DR is appropriate when supply continuity for the original LM393 ordering option is more important than the B-version improvements. The LM2903DR is useful when an established LM2903-family part is preferred, subject to checking temperature grade and exact limits. Choose the LMV393DR only when lower power consumption justifies changing to a CMOS comparator with a much lower supply-voltage ceiling. All listed candidates use the same package, but final approval should confirm pin assignments, absolute maximum ratings, output timing, and pull-up requirements.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM393DR LM2903DR LM393AIDR LM2903AIDR LMV393DR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Comparator Channels 2 2 2 2 2 2
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-drain

Bảo phân biệt quan trọng

  • Improved B-version offset performance in the standard SOIC-8 footprint (vsLM393DR)
  • Wide differential sensing capability for industrial threshold circuits (vsLMV393DR)
  • Direct family migration across LM393 and LM2903 base devices (vsLM2903DR)

Ghi chú thiết kế

Every open-collector output needs an external pull-up resistor. Calculate the worst-case pull-up current as (VLOGIC - VOLSAT) divided by the pull-up resistance, and confirm that this current remains below the comparator output sink-current rating. Place the resistor close to the receiving logic input or the comparator output so that a long trace does not add capacitance or pick up noise.

Keep the two differential input networks away from switching nodes, relay contacts, high-current return paths, and the pull-up resistor where possible. Connect the supply bypass capacitor close to pin 8 and ground pin 4. High-impedance input nodes should be surrounded by a grounded guard or keep-out area where practical, because capacitive coupling can cause false switching at the threshold.

Do not confuse the 38 V maximum rated supply with the permitted operating supply range. Likewise, the ability to accept differential inputs up to ±38 V does not make every input pin safe at ±38 V relative to ground. Verify each pin's absolute maximum voltage, common-mode limits, supply current, and output loading under worst-case temperature conditions before releasing the layout.

If a comparator drives a cable, relay, or long wiring harness, keep the sensitive input section compact and add protection close to the connector. The 2 kV HBM ESD rating describes device-level immunity, not unlimited connector protection. Use series resistors or clamping devices where the external harness can introduce transients, and ensure the ground reference at the comparator is not shared with high-current return paths.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The device is a commercial-grade dual comparator rated for -40°C to +85°C. Confirm current material and environmental compliance declarations for the exact ordering code with the manufacturer.

Dữ liệu được xác minh vào: 2026-11-13 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

LM393BIDR datasheet LM393BIDR datasheet pdf LM393BIDR pinout Texas Instruments LM393BIDR LM393BIDR SOIC-8 comparator LM393BIDR open collector output LM393BIDR vs LM393DR LM393BIDR drop-in replacement LM393BIDR equivalent LM393BIDR overvoltage detection LM393BIDR price LM393BIDR stock LM393BIDR application circuit LM393BIDR cross reference

Các bộ phận và thuật ngữ liên quan

Texas Instruments LM393BIDR LM393DR LM2903DR LM393AIDR LM2903AIDR LMV393DR dual differential comparator general-purpose comparator analog comparator IC open-collector output open-drain output input offset voltage input bias current common-mode input range differential input voltage TTL-compatible output CMOS-compatible output MOS-compatible output SOIC-8 package surface-mount package battery monitoring voltage-window detection zero-cross detection ESD protection
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ