LPC1112FHN33/101 - 50MHz ARM Cortex-M0 MCU | NXP
MPN: LPC1112FHN33/101 ✓ Hoạt độngLPC1112FHN33/101 Tóm tắt
An Arm Cortex-M0 microcontroller is a compact 32-bit processor designed for control-oriented embedded systems. The Cortex-M0 core uses a simple instruction set that supports efficient code execution without the hardware complexity of higher-performance cores. Within the product hierarchy, the LPC1112FHN33/101 belongs to the NXP LPC11xx family of low-cost 32-bit microcontrollers designed to replace conventional 8-bit and 16-bit devices while retaining compact code size and low-power behavior.
Key device characteristics include a 50 MHz maximum CPU frequency, 16 KB of flash, 2 KB of SRAM, and a 1.8 V to 3.6 V operating-voltage range. The 32-HVQFN package exposes 28 GPIO pins, enabling compact connection to sensors, actuators, communications transceivers, and human-interface circuitry. Two 10-bit ADC channels and timer functions support measurement, motor-control, and general-purpose automation applications.
The architecture is based on the Arm Cortex-M0 processor and is positioned for cost-sensitive embedded products where energy efficiency, deterministic behavior, and code density matter more than high compute throughput. The LPC1112 family is described by NXP as a low-cost platform for replacing 8-bit and 16-bit microcontroller installations. Its compact memory configuration is suitable for control loops, protocol handling, status monitoring, and distributed peripheral control.
Typical applications include industrial sensor nodes, building controls, appliance interfaces, compact motor controllers, communication modules, and low-power IoT equipment. A 28-GPIO footprint allows the device to manage digital inputs, outputs, serial communications, and analog monitoring without requiring a large external peripheral set. Its 3.6 V maximum supply voltage also suits battery-assisted and energy-conscious designs when regulator headroom is designed appropriately.
PCB design should preserve clean supply decoupling, short analog traces, and a grounded exposed-pad connection according to the manufacturer land pattern. Confirm pin multiplexing, peripheral availability, flash programming, and operating limits against the manufacturer datasheet before a new PCB layout or firmware revision is released.
This product page combines the exact LPC1112FHN33/101 ordering information with family-level specifications, package guidance, application context, and drop-in alternatives. It also distinguishes confirmed pin-compatible replacements from broader MCU choices that may require firmware and board-level changes.
Bộ thay thế dễ dàng lắp đặt cho LPC1112FHN33/101 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
LPC1111FHN33/101
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LPC1113FHN33/101
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC1114FHN33/101
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC1122FHN33/101
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC1124FHN33/101
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC1112FHN33/101 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Manufacturer | NXP Semiconductors |
| Maximum CPU Frequency | 50 MHz |
| Core | Arm Cortex-M0 |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| SRAM | 2 KB |
| Operating Voltage Range | 1.8 V to 3.6 V |
| GPIO Count | 28 pins |
| ADC Resolution | 10 bits |
| ADC Channel Count | 2 channels |
| Hộp | 32-HVQFN, 7 x 7 mm |
| Total Package Lead Count | 32 pins |
| Architecture | 32-bit |
| Application Class | Low-cost embedded control |
| Trạng thái RoHS | Compliant |
| Điện áp cung cấp | 1.8 V to 3.6 V |
| Maximum Clock Rate | 50 MHz |
| Datasheet Document Length | 59 pages |
Hướng dẫn cấu hình chân LPC1112FHN33/101 32 pins
Cấu hình chân cho LPC1112FHN33/101 (32 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LPC1112FHN33/101.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LPC1112FHN33/101 phù hợp cho 6 Áp dụngs: Industrial Sensor Node, Building Control Interface, Low-Power IoT Sensor, Appliance Control Module, Compact Motor Controller, Battery-Powered Data Logger.
Industrial Sensor Node
The LPC1112FHN33/101 fits compact industrial sensor nodes that require local acquisition, digital control, and communication without the memory cost of a larger microcontroller. Its 50 MHz Arm Cortex-M0 core provides ample control performance, while two 10-bit ADC channels and 28 GPIO pins support sensors, alarm inputs, status indicators, and actuator outputs. The 1.8 V to 3.6 V operating range permits integration with regulated 1.8 V and 3.3 V industrial rails. Designers should use the 2 KB SRAM conservatively, buffering samples before transmission rather than retaining large histories. Firmware should validate scaling, filtering, and threshold behavior, while the PCB keeps analog inputs away from switching nodes and supplies local decoupling close to the package.
Building Control Interface
The LPC1112FHN33/101 is appropriate for building-control modules that coordinate switches, inputs, indicators, and serial field-bus connections. Its 28 GPIO pins reduce the need for external I/O expanders in a compact controller, and the 50 MHz Cortex-M0 core can handle protocol state machines, debounce logic, and scheduled control tasks. A 16 KB flash budget supports a compact application image, while the 2 KB SRAM is suitable for short message frames and status structures rather than large protocol buffers. For lighting or HVAC outputs, keep relays and triacs away from the MCU and provide isolation or snubbing as required. The 1.8 V to 3.6 V supply range makes regulated rail integration straightforward, but thermal and EMC requirements must be evaluated at the enclosure level.
Low-Power IoT Sensor
The LPC1112FHN33/101 can serve as the low-power control core in a compact IoT sensor when the design favors a simple Cortex-M0 instruction set and modest memory. Two 10-bit ADC channels can monitor analog sensor nodes, 28 GPIO pins can handle digital inputs and outputs, and the 50 MHz operating rate allows short duty-cycled processing tasks. The 1.8 V minimum operating voltage supports low-voltage power-path designs, provided the regulator can start the MCU and peripherals within their specified limits. The 16 KB flash and 2 KB SRAM require firmware discipline, including compact libraries and bounded radio buffers. Select external sensors and transceivers for low leakage, then test sleep, wake, and radio-transmit current at the complete-system level rather than relying only on the MCU specification.
Appliance Control Module
The LPC1112FHN33/101 fits appliance control boards that coordinate buttons, displays, motor commands, and safety-related inputs. Its Arm Cortex-M0 core supports a compact real-time control structure, 28 GPIO pins provide a useful interface budget, and the two 10-bit ADC channels can monitor simple analog feedback. The 1.8 V to 3.6 V range supports common low-voltage regulated architectures. For motor or relay loads, the MCU should issue commands to separate driver circuits rather than carrying load current directly. Designers should partition safety shutdown paths so a firmware fault does not depend solely on normal software polling. The 16 KB flash is adequate for a focused control application, while the 2 KB SRAM should be allocated between stack, communications, and state variables with explicit sizing.
Compact Motor Controller
The LPC1112FHN33/101 is suitable as the command-processing microcontroller in a compact motor-control system with an external power stage. Its timers and 50 MHz Cortex-M0 execution rate support duty-cycle calculation, speed-reference handling, and protection sequencing, while two 10-bit ADC channels can monitor scaled feedback voltages. The 28 GPIO pins provide control signals, Hall or encoder inputs, and fault indication. The MCU is not a substitute for an H-bridge, gate driver, current shunt, or protection circuit. Place the controller and analog measurement paths away from high-current switching nodes, validate signal filtering, and include hardware shutdown paths. The 2 KB SRAM limits trace depth and buffer size, so high-rate control loops should be measured carefully for timing headroom.
Battery-Powered Data Logger
The LPC1112FHN33/101 can coordinate a small battery-powered data logger that periodically reads sensors, timestamps events, and stores or transmits compact records. Two 10-bit ADC channels support basic measurements, 28 GPIO pins provide sensor and status connections, and the low-cost Cortex-M0 platform is well suited to routine embedded control. The 1.8 V to 3.6 V operating range permits operation from an appropriate regulated battery rail, while the 50 MHz core completes sample-and-store tasks rapidly between long idle intervals. Because the MCU contains 16 KB of flash and 2 KB of SRAM, use a compact data format and avoid storing large logs internally unless external nonvolatile memory is added. Measure startup energy, sleep current, and regulator efficiency because total-system battery life is not determined by the microcontroller alone.
Dữ liệu tham khảo kỹ thuật cho LPC1112FHN33/101 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LPC1111FHN33/101 | LPC1113FHN33/101 | LPC1114FHN33/101 | LPC1122FHN33/101 | LPC1124FHN33/101 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (7x7) | 32-HVQFN (7x7) | 32-HVQFN (7x7) | 32-HVQFN (7x7) | 32-HVQFN (7x7) | 32-HVQFN (7x7) |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
Bảo phân biệt quan trọng
- Balanced memory density for compact control designs (vsLPC1111FHN33/101)
- Direct GPIO connectivity in a compact package (vsLPC1114FHN33/101)
- Low-voltage operation for regulated embedded rails (vsLPC1122FHN33/101)
Ghi chú thiết kế
Design the supply for the complete 1.8 V to 3.6 V operating range rather than assuming a nominal 3.3 V rail. Place the required input and decoupling capacitors at the package power pins using the manufacturer reference layout, and keep the analog supply path free from abrupt load-current transitions. If a GPIO drives a load, account for its voltage and current limits separately from the regulator capacity.
Use the manufacturer's 32-HVQFN 7 x 7 mm land pattern and thermal-pad connection exactly. The exposed pad should connect to the appropriate ground plane on a multilayer board, with vias placed to reduce inductance while following the package drawing's via guidance. Verify pad dimensions and solder-mask settings against the current NXP package drawing before fabrication.
Do not assume that all 28 GPIO functions are simultaneously available; package pins are multiplexed among GPIO, timers, serial interfaces, ADC functions, and other peripherals. Build the pin assignment from the datasheet pin table and reserve programming and debug functions for the intended production process. Also account for the limited 2 KB SRAM when selecting RTOS, graphics, or communication libraries.
Thông tin tuân thủ
RoHS compliance is identified in the product listing. Other compliance attributes and application-specific qualification requirements are not stated.