NXP Semiconductors

LPC1112FHN33/101 - 50MHz ARM Cortex-M0 MCU | NXP

MPN: LPC1112FHN33/101 ✓ Active
1.8 V to 3.6 V Vdss 32-HVQFN, 7 x 7 mm Package 50 MHz Speed 16 KB Memory
MOQ: 1 |

LPC1112FHN33/101 Overview

The NXP Semiconductors LPC1112FHN33/101 is a 32-bit Arm Cortex-M0 microcontroller operating at up to 50 MHz, with 16 KB of flash memory and 2 KB of SRAM, in a 32-HVQFN 7 x 7 mm package. The device operates from 1.8 V to 3.6 V and combines a compact embedded system with 28 GPIO pins, 10-bit ADC functions, and communication peripherals for low-cost embedded control.

An Arm Cortex-M0 microcontroller is a compact 32-bit processor designed for control-oriented embedded systems. The Cortex-M0 core uses a simple instruction set that supports efficient code execution without the hardware complexity of higher-performance cores. Within the product hierarchy, the LPC1112FHN33/101 belongs to the NXP LPC11xx family of low-cost 32-bit microcontrollers designed to replace conventional 8-bit and 16-bit devices while retaining compact code size and low-power behavior.

Key device characteristics include a 50 MHz maximum CPU frequency, 16 KB of flash, 2 KB of SRAM, and a 1.8 V to 3.6 V operating-voltage range. The 32-HVQFN package exposes 28 GPIO pins, enabling compact connection to sensors, actuators, communications transceivers, and human-interface circuitry. Two 10-bit ADC channels and timer functions support measurement, motor-control, and general-purpose automation applications.

The architecture is based on the Arm Cortex-M0 processor and is positioned for cost-sensitive embedded products where energy efficiency, deterministic behavior, and code density matter more than high compute throughput. The LPC1112 family is described by NXP as a low-cost platform for replacing 8-bit and 16-bit microcontroller installations. Its compact memory configuration is suitable for control loops, protocol handling, status monitoring, and distributed peripheral control.

Typical applications include industrial sensor nodes, building controls, appliance interfaces, compact motor controllers, communication modules, and low-power IoT equipment. A 28-GPIO footprint allows the device to manage digital inputs, outputs, serial communications, and analog monitoring without requiring a large external peripheral set. Its 3.6 V maximum supply voltage also suits battery-assisted and energy-conscious designs when regulator headroom is designed appropriately.

PCB design should preserve clean supply decoupling, short analog traces, and a grounded exposed-pad connection according to the manufacturer land pattern. Confirm pin multiplexing, peripheral availability, flash programming, and operating limits against the manufacturer datasheet before a new PCB layout or firmware revision is released.

This product page combines the exact LPC1112FHN33/101 ordering information with family-level specifications, package guidance, application context, and drop-in alternatives. It also distinguishes confirmed pin-compatible replacements from broader MCU choices that may require firmware and board-level changes.

Drop-in alternatives for LPC1112FHN33/101 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

LPC1111FHN33/101

✅ Drop-In
📦 32-HVQFN (7x7)
Lower-density family member with reduced flash and SRAM; same 50 MHz Cortex-M0 class and 32-HVQFN package, with flash reduced by at least 8 KB and SRAM reduced by at least 1 KB

📋 Reference alternative (not in catalog)

LPC1113FHN33/101

✅ Drop-In ⚠️ Specs Unverified
📦 32-HVQFN (7x7)
Higher-density LPC11xx family member with increased flash and SRAM; same 50 MHz Cortex-M0 class and 32-HVQFN package, with flash increased by at least 8 KB

📋 Reference alternative (not in catalog)

LPC1114FHN33/101

✅ Drop-In ⚠️ Specs Unverified
📦 32-HVQFN (7x7)
Higher-density LPC11xx family member with increased flash and SRAM; same 50 MHz Cortex-M0 class and 32-HVQFN package, with flash increased by at least 16 KB

📋 Reference alternative (not in catalog)

LPC1122FHN33/101

✅ Drop-In ⚠️ Specs Unverified
📦 32-HVQFN (7x7)
Same-package LPC11xx alternative with 32-bit Cortex-M0 operation and different memory density; flash and SRAM vary from 16 KB and 2 KB in the target

📋 Reference alternative (not in catalog)

LPC1124FHN33/101

✅ Drop-In ⚠️ Specs Unverified
📦 32-HVQFN (7x7)
Same-package higher-density LPC11xx candidate with 32-bit Cortex-M0 operation; flash and SRAM differ from the target's 16 KB and 2 KB configuration

📋 Reference alternative (not in catalog)

LPC1112FHN33/101 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M0 microcontroller
Manufacturer NXP Semiconductors
Maximum CPU Frequency 50 MHz
Core Arm Cortex-M0
Flash Memory 16 KB
Flash Organization 16K x 8 bits
SRAM 2 KB
Operating Voltage Range 1.8 V to 3.6 V
GPIO Count 28 pins
ADC Resolution 10 bits
ADC Channel Count 2 channels
Package 32-HVQFN, 7 x 7 mm
Total Package Lead Count 32 pins
Architecture 32-bit
Application Class Low-cost embedded control
RoHS Status Compliant
Supply Voltage 1.8 V to 3.6 V
Maximum Clock Rate 50 MHz
Datasheet Document Length 59 pages

LPC1112FHN33/101 32 pins Pin Configuration Guide

Pin configuration for LPC1112FHN33/101 (32 pins package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

32 pins package pinout diagram for LPC1112FHN33/101

No detailed pinout data available for LPC1112FHN33/101.

Refer to the datasheet for full pin configuration.

Typical Applications

LPC1112FHN33/101 is suitable for 6 applications: Industrial Sensor Node, Building Control Interface, Low-Power IoT Sensor, Appliance Control Module, Compact Motor Controller, Battery-Powered Data Logger.

🔧

Industrial Sensor Node

The LPC1112FHN33/101 fits compact industrial sensor nodes that require local acquisition, digital control, and communication without the memory cost of a larger microcontroller. Its 50 MHz Arm Cortex-M0 core provides ample control performance, while two 10-bit ADC channels and 28 GPIO pins support sensors, alarm inputs, status indicators, and actuator outputs. The 1.8 V to 3.6 V operating range permits integration with regulated 1.8 V and 3.3 V industrial rails. Designers should use the 2 KB SRAM conservatively, buffering samples before transmission rather than retaining large histories. Firmware should validate scaling, filtering, and threshold behavior, while the PCB keeps analog inputs away from switching nodes and supplies local decoupling close to the package.

🔧

Building Control Interface

The LPC1112FHN33/101 is appropriate for building-control modules that coordinate switches, inputs, indicators, and serial field-bus connections. Its 28 GPIO pins reduce the need for external I/O expanders in a compact controller, and the 50 MHz Cortex-M0 core can handle protocol state machines, debounce logic, and scheduled control tasks. A 16 KB flash budget supports a compact application image, while the 2 KB SRAM is suitable for short message frames and status structures rather than large protocol buffers. For lighting or HVAC outputs, keep relays and triacs away from the MCU and provide isolation or snubbing as required. The 1.8 V to 3.6 V supply range makes regulated rail integration straightforward, but thermal and EMC requirements must be evaluated at the enclosure level.

🔧

Low-Power IoT Sensor

The LPC1112FHN33/101 can serve as the low-power control core in a compact IoT sensor when the design favors a simple Cortex-M0 instruction set and modest memory. Two 10-bit ADC channels can monitor analog sensor nodes, 28 GPIO pins can handle digital inputs and outputs, and the 50 MHz operating rate allows short duty-cycled processing tasks. The 1.8 V minimum operating voltage supports low-voltage power-path designs, provided the regulator can start the MCU and peripherals within their specified limits. The 16 KB flash and 2 KB SRAM require firmware discipline, including compact libraries and bounded radio buffers. Select external sensors and transceivers for low leakage, then test sleep, wake, and radio-transmit current at the complete-system level rather than relying only on the MCU specification.

🔧

Appliance Control Module

The LPC1112FHN33/101 fits appliance control boards that coordinate buttons, displays, motor commands, and safety-related inputs. Its Arm Cortex-M0 core supports a compact real-time control structure, 28 GPIO pins provide a useful interface budget, and the two 10-bit ADC channels can monitor simple analog feedback. The 1.8 V to 3.6 V range supports common low-voltage regulated architectures. For motor or relay loads, the MCU should issue commands to separate driver circuits rather than carrying load current directly. Designers should partition safety shutdown paths so a firmware fault does not depend solely on normal software polling. The 16 KB flash is adequate for a focused control application, while the 2 KB SRAM should be allocated between stack, communications, and state variables with explicit sizing.

🔧

Compact Motor Controller

The LPC1112FHN33/101 is suitable as the command-processing microcontroller in a compact motor-control system with an external power stage. Its timers and 50 MHz Cortex-M0 execution rate support duty-cycle calculation, speed-reference handling, and protection sequencing, while two 10-bit ADC channels can monitor scaled feedback voltages. The 28 GPIO pins provide control signals, Hall or encoder inputs, and fault indication. The MCU is not a substitute for an H-bridge, gate driver, current shunt, or protection circuit. Place the controller and analog measurement paths away from high-current switching nodes, validate signal filtering, and include hardware shutdown paths. The 2 KB SRAM limits trace depth and buffer size, so high-rate control loops should be measured carefully for timing headroom.

🔧

Battery-Powered Data Logger

The LPC1112FHN33/101 can coordinate a small battery-powered data logger that periodically reads sensors, timestamps events, and stores or transmits compact records. Two 10-bit ADC channels support basic measurements, 28 GPIO pins provide sensor and status connections, and the low-cost Cortex-M0 platform is well suited to routine embedded control. The 1.8 V to 3.6 V operating range permits operation from an appropriate regulated battery rail, while the 50 MHz core completes sample-and-store tasks rapidly between long idle intervals. Because the MCU contains 16 KB of flash and 2 KB of SRAM, use a compact data format and avoid storing large logs internally unless external nonvolatile memory is added. Measure startup energy, sleep current, and regulator efficiency because total-system battery life is not determined by the microcontroller alone.

What is the LPC1112FHN33/101?
The LPC1112FHN33/101 is a low-cost 32-bit Arm Cortex-M0 microcontroller from NXP Semiconductors, rated for operation up to 50 MHz with 16 KB of flash memory, 2 KB of SRAM, and 28 GPIO pins. According to the NXP LPC11xx family information, the LPC11xx devices target 8-bit and 16-bit embedded-system upgrades while emphasizing low power, compact code size, and straightforward peripheral integration. The target device is supplied in a 32-HVQFN 7 x 7 mm package.
What are the key specifications of LPC1112FHN33/101 that engineers should know?
The LPC1112FHN33/101 combines a 50 MHz Arm Cortex-M0 core, 16 KB of flash, 2 KB of SRAM, 28 GPIO pins, two 10-bit ADC channels, and a 1.8 V to 3.6 V supply range. The NXP product information identifies the LPC11xx family as a low-cost 32-bit MCU family for replacing conventional 8-bit and 16-bit designs. Its compact 32-HVQFN 7 x 7 mm package is suitable for space-constrained embedded boards.
Where can I download the LPC1112FHN33/101 datasheet PDF?
The official LPC1112FHN33 product page on the NXP website provides the manufacturer data sheet for the LPC1112FHN33/101 device. The linked document describes the 32-bit Arm Cortex-M0 architecture, memory organization, electrical characteristics, and package information. Use the NXP product page as the primary source, then compare the ordering suffix and package drawing against the intended design before releasing the schematic or PCB files.
Where can I find the LPC1112FHN33/101 pinout?
The LPC1112FHN33/101 pinout is found in the pin-description table and package drawing within the NXP manufacturer datasheet. The device uses a 32-HVQFN 7 x 7 mm package with 28 GPIO functions, but not every lead is necessarily a general-purpose GPIO because multiplexed peripheral and power functions take priority. Assign PCB nets from the datasheet pin table rather than inferring functions from the 28-GPIO headline specification.
What is the supply voltage range of the LPC1112FHN33/101?
The LPC1112FHN33/101 operates from 1.8 V to 3.6 V, as stated in the product listings and the LPC11xx family description. This range allows the microcontroller to operate from regulated 1.8 V or 2.5 V rails as well as common 3.3 V designs, provided the selected regulator and connected peripherals remain within their own operating limits. Verify timing and electrical characteristics for the actual system voltage in the manufacturer datasheet.
How much flash and SRAM does the LPC1112FHN33/101 have?
The LPC1112FHN33/101 contains 16 KB of flash memory organized as 16K x 8 bits and provides 2 KB of SRAM. This compact memory footprint is suitable for small control programs, communication state machines, status logging, and peripheral control tasks. The broader LPC11xx family supports configurations up to 64 KB of flash and 8 KB of SRAM, but this exact LPC1112FHN33/101 ordering code provides the 16 KB and 2 KB configuration.
Is the LPC1112FHN33/101 suitable for industrial and IoT applications?
The LPC1112FHN33/101 is suitable for compact industrial and IoT control nodes where an Arm Cortex-M0 core, 28 GPIO pins, two 10-bit ADC channels, and low-cost 3.3 V operation provide a useful feature balance. Its 50 MHz processing rate supports responsive control and communication tasks, while the 2 KB SRAM requires disciplined buffer sizing. Confirm application-specific temperature, EMC, and qualification requirements before deployment.
What is the difference between LPC1112FHN33/101 and LPC1111FHN33/101?
The LPC1111FHN33/101 and LPC1112FHN33/101 belong to the same NXP LPC11xx family and use the same 32-HVQFN 7 x 7 mm package arrangement. The principal documented distinction is device density: the LPC1112 provides 16 KB of flash and 2 KB of SRAM, while the LPC1111 is the lower-density member of the family. The target's 50 MHz operating class and 1.8 V to 3.6 V range make the two closely related drop-in candidates, but firmware and peripheral availability should still be checked.
When should I choose LPC1112FHN33/101 over LPC1111FHN33/101?
Choose the LPC1112FHN33/101 when a design needs more code and data storage than the lower-density LPC1111 member while retaining the same 50 MHz Cortex-M0 operating class and 32-HVQFN package. The LPC1112 offers 16 KB of flash and 2 KB of SRAM, making it preferable for larger state machines, more complete communication handlers, or more elaborate control firmware. Choose the lower-density member only when its smaller memory footprint satisfies the application.
Can LPC1111FHN33/101 replace LPC1112FHN33/101 without PCB changes?
The LPC1111FHN33/101 is a plausible package-level drop-in candidate for the LPC1112FHN33/101 because both are NXP LPC11xx devices listed in the 32-HVQFN 7 x 7 mm class. The main engineering trade-off is memory density: the LPC1112 has 16 KB of flash and 2 KB of SRAM, while the LPC1111 provides less memory. Verify the complete pin and peripheral table, then confirm that the application image and runtime data fit the lower-density device before substitution.
What is the best drop-in replacement for LPC1112FHN33/101?
The closest documented same-package replacement is the NXP LPC1111FHN33/101, which uses the same 32-HVQFN 7 x 7 mm package class and belongs to the same LPC11xx family. It is not functionally equivalent in every respect because its memory density is lower. NXP also offers LPC1113FHN33/101 and LPC1114FHN33/101 in the same package family, providing higher-density options, but the exact flash, SRAM, peripheral, and firmware requirements must be checked before PCB release.
Is an STM32 or PIC32 MCU a drop-in replacement for LPC1112FHN33/101?
An STM32 or PIC32 microcontroller is not a true drop-in replacement for the LPC1112FHN33/101 solely because it offers similar 32-bit performance. The candidate alternatives presented on this page are same-manufacturer LPC11xx devices in the matching HVQFN package class. A cross-manufacturer MCU may require a different footprint, pin mapping, clock strategy, peripheral configuration, firmware port, and toolchain. Such a change should be treated as a redesign rather than a component substitution.
Where can I buy the LPC1112FHN33/101 online?
The LPC1112FHN33/101 can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantities, and delivery timing without embedding a price that may become stale. Confirm that the quoted MPN exactly matches LPC1112FHN33/101 and that the supplied package and ordering suffix correspond to the assembled board.
What is the price of the LPC1112FHN33/101?
The current unit price for the LPC1112FHN33/101 is available through the Request a Quote form on this page. Because component pricing can change with quantity, market conditions, and packaging configuration, request a quotation for the exact order quantity. No distributor or marketplace is recommended on this page; the quote form provides one consistent purchasing path for the exact LPC1112FHN33/101 ordering code.
What is the lead time and stock status for LPC1112FHN33/101?
Current stock status and lead time for LPC1112FHN33/101 should be confirmed through the Request a Quote form on this page. NXP lists the product as active, but that lifecycle status does not by itself guarantee immediate availability at every quantity. When requesting a quotation, specify the required quantity, package form, production schedule, and any traceability requirements so the procurement response reflects the actual build plan.
Does the LPC1112FHN33/101 meet RoHS and REACH requirements?
The LPC1112FHN33/101 is identified as RoHS compliant in the product listing. REACH status is not stated in the available product information, so it should be confirmed with the manufacturer or documented through the customer's material-compliance process. RoHS compliance concerns restricted substances in the finished component; it does not automatically establish every application-specific environmental, automotive, or conflict-minerals requirement.
Can I use LPC1112FHN33/101 for motor control and analog sensing?
The LPC1112FHN33/101 can serve as the supervisory controller in a small motor-control or analog-sensing system because it provides two 10-bit ADC channels, 28 GPIO pins, timers, and a 50 MHz Cortex-M0 core. It is not, by itself, a high-power gate driver or motor driver; external power stages, current sensing, protection, and signal conditioning remain necessary. Confirm timer mapping, ADC accuracy requirements, and noise performance in the application circuit.

Engineering reference data for LPC1112FHN33/101 — comparison, design guidance, and compliance information.

Selection Guide

Choose the LPC1112FHN33/101 for a compact embedded controller that needs a 50 MHz Arm Cortex-M0 core, 16 KB of flash, 2 KB of SRAM, 28 GPIO pins, and two 10-bit ADC channels. The LPC1111FHN33/101 is the lower-density option when its smaller memory is sufficient and minimizing device cost is the priority. The LPC1113FHN33/101 or LPC1114FHN33/101 can be preferable when additional flash and SRAM are needed while retaining the same package family. The LPC1122FHN33/101 and LPC1124FHN33/101 offer other density points for firmware sizing, but their exact peripheral complement should be checked. Because all alternatives are NXP family members, they are more likely to simplify package reuse than a cross-manufacturer MCU. Final selection still requires checking the exact pin table, memory requirements, peripheral availability, programming configuration, temperature range, and lifecycle requirements against the manufacturer datasheet.

Comparison with Alternatives

Parameter This Product LPC1111FHN33/101 LPC1113FHN33/101 LPC1114FHN33/101 LPC1122FHN33/101 LPC1124FHN33/101
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (7x7) 32-HVQFN (7x7) 32-HVQFN (7x7) 32-HVQFN (7x7) 32-HVQFN (7x7) 32-HVQFN (7x7)
CPU Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz

Key Differentiators

  • Balanced memory density for compact control designs (vs LPC1111FHN33/101)
  • Direct GPIO connectivity in a compact package (vs LPC1114FHN33/101)
  • Low-voltage operation for regulated embedded rails (vs LPC1122FHN33/101)

Design Notes

Design the supply for the complete 1.8 V to 3.6 V operating range rather than assuming a nominal 3.3 V rail. Place the required input and decoupling capacitors at the package power pins using the manufacturer reference layout, and keep the analog supply path free from abrupt load-current transitions. If a GPIO drives a load, account for its voltage and current limits separately from the regulator capacity.

Use the manufacturer's 32-HVQFN 7 x 7 mm land pattern and thermal-pad connection exactly. The exposed pad should connect to the appropriate ground plane on a multilayer board, with vias placed to reduce inductance while following the package drawing's via guidance. Verify pad dimensions and solder-mask settings against the current NXP package drawing before fabrication.

Do not assume that all 28 GPIO functions are simultaneously available; package pins are multiplexed among GPIO, timers, serial interfaces, ADC functions, and other peripherals. Build the pin assignment from the datasheet pin table and reserve programming and debug functions for the intended production process. Also account for the limited 2 KB SRAM when selecting RTOS, graphics, or communication libraries.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified in the product listing. Other compliance attributes and application-specific qualification requirements are not stated.

Data verified on: 2026-11-20 — data verified and curated by XAIPART's component engineering team

Related Searches

LPC1112FHN33/101 datasheet LPC1112FHN33/101 specifications LPC1112FHN33/101 pinout LPC1112FHN33/101 datasheet pdf NXP LPC1112FHN33/101 LPC1112FHN33/101 50MHz Cortex-M0 LPC1112FHN33/101 16KB flash LPC1112FHN33/101 HVQFN32 LPC1112FHN33/101 equivalent LPC1112FHN33/101 replacement LPC1112FHN33/101 vs LPC1111FHN33/101 LPC1112FHN33/101 application circuit LPC1112FHN33/101 price LPC1112FHN33/101 stock

Related Components & Terms

NXP Semiconductors LPC1112FHN33/101 LPC1111FHN33/101 LPC1113FHN33/101 LPC1114FHN33/101 LPC1122FHN33/101 LPC1124FHN33/101 Arm Cortex-M0 32-bit microcontroller embedded microcontroller microcontroller semiconductor LPC11xx family 32-HVQFN QFN family surface mount SMD 16 KB flash memory 2 KB SRAM 50 MHz 1.8 V to 3.6 V 10-bit ADC 28 GPIO RoHS
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details