Analog Devices

LT1008IN8 - Precision Picoamp Op Amp | Analog Devices

MPN: LT1008IN8 ✓ Hoạt động
±3 V to ±18 V Vdss 50 pA typical Id 8-pin PDIP Package
MOQ: 1 |

LT1008IN8 Tóm tắt

Analog Devices LT1008IN8 is a single precision operational amplifier with picoampere input bias current, microvolt-level offset voltage, low noise, and a 5 mA output-current capability, packaged in an 8-pin PDIP. The device is designed for instrumentation and signal-chain applications where input leakage, offset stability, common-mode rejection, and power-supply rejection are more important than wide bandwidth.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs while providing very high open-loop gain. The LT1008 belongs to the precision operational-amplifier category and, more broadly, to the signal-chain and analog IC hierarchy. Its unusually low bias current enables accurate sensing from high-impedance sources, sensors, transducers, and leakage-sensitive measurement circuits without adding substantial input-referred error.

The LT1008 combines picoampere bias currents maintained across the -55°C to 125°C temperature range with microvolt offset voltage, low offset drift, low voltage and current noise, and low power dissipation. According to the Analog Devices LT1008 datasheet, the amplifier can deliver 5 mA of load current while retaining high voltage gain. It also provides extremely high common-mode and power-supply rejection ratios, making it effective in systems where supply ripple or input-common-mode variation could otherwise degrade measurement accuracy.

The LT1008 is implemented as a bipolar precision amplifier. Its low bias current reduces error when the source impedance is high, while its precision reference and offset characteristics support stable null and calibration behavior over time and temperature. The amplifier is intended for general-purpose precision applications rather than high-speed signal conditioning, making stability and noise more important than slew rate or gain-bandwidth performance.

Typical uses include low-level sensor signal conditioning, electrochemical and biomedical instrumentation, photodiode amplifiers, precision current-to-voltage conversion, leakage measurement, strain-gauge bridges, and laboratory test equipment. Its low-noise and high-rejection characteristics are especially useful when the useful signal is small relative to the input offset or supply ripple.

For best performance, use suitable bypassing on the supply pins, keep input and feedback traces short, and avoid contamination or leakage pathways on high-impedance nodes. The offset specifications should be evaluated over the actual temperature range, and input protection must be designed to prevent excessive differential voltage or common-mode voltage. The IN8 suffix identifies the industrial-temperature PDIP package option, so board layout and thermal requirements should follow the package drawing rather than a surface-mount footprint.

This page consolidates the manufacturer's device information, distributor availability references, a precise package pinout, compatibility guidance, and practical design notes. It also distinguishes the only confirmed same-footprint alternative from functionally similar amplifiers that cannot be soldered directly into an existing PDIP-8 footprint.

Bộ thay thế dễ dàng lắp đặt cho LT1008IN8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

LT1008CN8

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 PDIP-8
Operating-temperature range differs: LT1008CN8 is commercial grade, while LT1008IN8 is specified from -55°C to 125°C; core precision-amplifier ratings are otherwise unchanged.

📋 Tham chiếu thay thế (không có trong danh mục)

LT1008IN8 Tỷ lệ tối đa & tính chất điện

Amplifier Type Single precision operational amplifier
Number of Circuits 1 circuit
Supply Voltage Range ±3 V to ±18 V
Maximum Total Supply Voltage 36 V
Input Offset Voltage 320 µV maximum
Input Bias Current 50 pA typical
Input Bias Current Temperature Range Maintained from -55°C to 125°C
Input Voltage Noise Density 7.5 nV/√Hz at 1 kHz
0.1 Hz Noise Density 22 nV/√Hz
Open-Loop Gain 120 dB typical
Common-Mode Rejection Ratio 120 dB typical
Power-Supply Rejection Ratio 110 dB typical
Gain-Bandwidth Product 800 kHz
Slew Rate 0.11 V/µs
Output Drive Current 5 mA
Khoảng nhiệt độ hoạt động -55°C to 125°C
Hộp 8-pin PDIP
Kiểu lắp đặt Through-hole

Cấu hình chân LT1008IN8

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Chân 1 NC — Not connected
Chân 2 - — Inverting input
Chân 3 + — Non-inverting input
Chân 4 V- — Negative power supply
Chân 5 NC — Not connected
Chân 6 OUT — Output
Chân 7 V+ — Positive power supply
Chân 8 NC — Not connected

Ứng dụng tiêu biểu

LT1008IN8 phù hợp cho 6 Áp dụngs: High-Impedance Sensor Signal Conditioning, Photodiode Current-to-Voltage Conversion, Precision Strain-Gauge Bridge Amplification, Electrochemical and Biomedical Instrumentation, Precision Current-to-Voltage Measurement, Laboratory and Test-Instrument Front Ends.

🧩

High-Impedance Sensor Signal Conditioning

The LT1008IN8 fits high-impedance sensor front ends because its 50 pA typical input bias current limits the error introduced by the source and feedback impedances. That low leakage is especially valuable when sensor currents are picoampere-scale and the required measurement accuracy would otherwise be degraded by input bias. Place the amplifier close to the sensor connector, keep the summing node short, and use guarding where humidity or board contamination could create parallel leakage. The low 7.5 nV/√Hz voltage-noise density also helps preserve small-signal detail, although the circuit should avoid excessive bandwidth that could amplify high-frequency noise.

📷

Photodiode Current-to-Voltage Conversion

The LT1008IN8 is appropriate for photodiode and phototransistor current measurements because picoampere input bias current reduces errors relative to the very small generated currents. In a transimpedance configuration, the feedback resistor converts photocurrent into voltage while the amplifier maintains low input voltage error across that resistor. Its 5 mA output-drive capability and low noise support practical signal levels, but the resistor value must balance conversion gain against bandwidth and stability. A guarded, contamination-free PCB layout is essential because surface leakage can rival the photodiode current itself.

🏭

Precision Strain-Gauge Bridge Amplification

The LT1008IN8 can amplify the small differential voltage produced by a strain-gauge bridge while rejecting supply variations and common-mode voltage. Its 120 dB typical common-mode rejection and 110 dB typical power-supply rejection reduce unwanted signals that could otherwise obscure the mechanical measurement. The 120 dB typical open-loop gain supports accurate closed-loop gain, while microvolt-level offset characteristics minimize output error. Designers should use stable low-temperature-coefficient feedback resistors, maintain balanced resistance networks, and provide local supply bypassing to preserve the benefit of the amplifier's rejection performance.

💊

Electrochemical and Biomedical Instrumentation

The LT1008IN8 is well suited to electrochemical sensors and biomedical instrumentation where electrode currents can be extremely small and signal integrity depends on leakage control. Picoampere-scale input bias current limits bias-induced measurement error, while low voltage noise supports resolving small changes in sensor output. The extended -55°C to 125°C LT1008IN8 temperature grade is useful where environmental conditions vary substantially. PCB cleanliness, conformal coating strategy, connector insulation, and guarding should be reviewed as a complete system because external contamination can defeat the benefit of the low-leakage amplifier.

⚡

Precision Current-to-Voltage Measurement

The LT1008IN8 can measure small currents by applying a known sense resistor and amplifying the resulting voltage with high open-loop gain. Its 320 µV maximum input offset becomes a meaningful input-referred error when the measured current is small, so offset calibration and temperature drift should be included in the error budget. The low input bias current avoids additional error from the sense path, and 5 mA output drive permits useful range around the measurement node. Select resistor values carefully because large feedback values increase Johnson noise and can make PCB leakage significant.

🖥️

Laboratory and Test-Instrument Front Ends

The LT1008IN8 fits precision laboratory measurement equipment requiring low noise, low offset, and low input leakage. Its 7.5 nV/√Hz voltage-noise density, 120 dB typical common-mode rejection, and 110 dB typical power-supply rejection help preserve accuracy when the source is small and the test bench introduces supply or ground disturbances. The 800 kHz gain-bandwidth product is adequate for many low-frequency precision measurements rather than wideband signal capture. Stable reference elements, low-leakage relays, clean connectors, and properly bypassed supplies remain essential to achieving the accuracy implied by the device specifications.

Tóm tắt các sản phẩm được đề xuất

LT1008IN8 Analog Devices Được sử dụng trong: High-Impedance Sensor Signal Conditioning, Photodiode Current-to-Voltage Conversion, Precision Strain-Gauge Bridge Amplification, Electrochemical and Biomedical Instrumentation, Precision Current-to-Voltage Measurement, Laboratory and Test-Instrument Front Ends LT1012 Precision amplifier for related low-level instrumentation Được sử dụng trong: High-Impedance Sensor Signal Conditioning, Electrochemical and Biomedical Instrumentation LT1014 Precision amplifier for related low-level measurement circuits Được sử dụng trong: Photodiode Current-to-Voltage Conversion LT1028 Low-offset precision amplifier for related instrumentation Được sử dụng trong: Precision Strain-Gauge Bridge Amplification, Laboratory and Test-Instrument Front Ends LT1007 Precision amplifier for related current-measurement paths Được sử dụng trong: Precision Current-to-Voltage Measurement
Where to buy LT1008IN8 online?
The LT1008IN8 can be requested through the “Request a Quote” form on this page for the exact 8-pin PDIP package. Analog Devices identifies the LT1008IN8 as a single precision amplifier in an 8-PDIP package, and distributor listings also identify the same package and circuit count. Confirm the required quantity, permissible order quantity, current inventory, and delivery schedule when submitting the request.
What is the price of LT1008IN8?
Use the “Request a Quote” form on this page for the current unit price, quantity pricing, stock, and lead time for LT1008IN8. The manufacturer product page and distributor records identify the component, but pricing can change with quantity, package, inventory, and market conditions. Providing the intended order quantity with the request allows the commercial details to be confirmed for the exact MPN.
What is the lead time for LT1008IN8?
Request the current lead time through the “Request a Quote” form on this page. Lead time can depend on order quantity, current factory inventory, and component availability. The Analog Devices product page lists the LT1008 family as a precision operational amplifier for general-purpose applications, while distributor records include the exact LT1008IN8 PDIP-8 ordering code.
Is LT1008IN8 in stock?
Stock status for LT1008IN8 should be confirmed through the “Request a Quote” form on this page. The part is an established Analog Devices precision operational amplifier in an 8-PDIP package, and distributor product pages track inventory for the exact ordering code. A quotation request can establish current availability, quantity limits, and expected delivery without relying on a stale listing status.
What are the key specifications of LT1008IN8 that engineers should know?
The LT1008IN8 is a single bipolar precision operational amplifier with 50 pA typical input bias current, 320 µV maximum input offset voltage, 7.5 nV/√Hz input voltage noise, and 120 dB typical open-loop gain. It operates from ±3 V to ±18 V, provides 5 mA of output drive current, and is specified over -55°C to 125°C in an 8-pin PDIP package.
What is the operating voltage of LT1008IN8?
The LT1008IN8 operates from ±3 V to ±18 V, corresponding to a total supply-voltage span of 6 V to 36 V. According to the Analog Devices LT1008 datasheet, the device is a bipolar precision amplifier intended for accurate low-level signal conditioning. Both supply rails must remain within their absolute maximum ratings, and the circuit must maintain adequate common-mode and output-swing headroom.
What is the input bias current of LT1008IN8?
The LT1008IN8 has 50 pA typical input bias current, with picoampere-level current maintained across the -55°C to 125°C operating range. According to the Analog Devices LT1008 datasheet, this unusually low input leakage reduces the voltage error produced when bias current flows through a high source impedance, making the amplifier suitable for transducers and leakage-sensitive instrumentation.
Where to download the LT1008IN8 datasheet PDF?
Download the LT1008 datasheet PDF from the official Analog Devices product page or the manufacturer-hosted PDF linked on this page. The document provides the electrical characteristics, package drawings, pin descriptions, ordering information, and typical application information for the LT1008 family. Use the manufacturer PDF for design verification and the LT1008IN8 ordering code when confirming the PDIP temperature option.
Where to find the LT1008IN8 pinout?
The LT1008IN8 uses the standard 8-pin PDIP operational-amplifier pinout shown in the pinout table on this page: pin 2 is inverting input, pin 3 is non-inverting input, pin 4 is negative supply, pin 6 is output, pin 7 is positive supply, and pins 1, 5, and 8 are not connected. Confirm orientation against the notch and pin-1 marker on the Analog Devices package drawing.
LT1008IN8 vs LT1008CN8 - which is better for industrial use?
Choose LT1008IN8 for systems requiring the extended -55°C to 125°C industrial-temperature range, and choose LT1008CN8 when a commercial-temperature device is sufficient. Both are single precision amplifiers in the 8-pin PDIP family and retain the same core electrical characteristics. The decisive parameter is operating-temperature coverage rather than a change in circuit function.
When should I choose LT1008IN8 over a general-purpose operational amplifier?
Choose LT1008IN8 when source leakage, offset voltage, offset drift, noise, and supply ripple could materially affect the result. Its 50 pA typical input bias current, 320 µV maximum offset, 7.5 nV/√Hz voltage-noise density, and high rejection ratios are more appropriate than a general-purpose amplifier for high-impedance sensors, precision bridges, and laboratory instrumentation.
Is LT1008IN8 suitable for photodiode and sensor measurement?
The LT1008IN8 is suitable for photodiode and high-impedance sensor measurement because its 50 pA typical bias current limits the error created by source impedance, while its low voltage noise supports small-signal detection. The circuit must still use guarded, clean PCB traces and suitable feedback resistors, because board leakage and guard resistance can become significant when the source impedance is extremely high.
What can replace LT1008IN8?
LT1008CN8 is the confirmed same-footprint replacement because it uses the same 8-pin PDIP layout and closely matches the LT1008IN8 precision-amplifier functions; its principal difference is its commercial temperature grade. For an existing PCB, do not assume that SOIC or surface-mount amplifier families are drop-in replacements even when their electrical specifications appear similar.
Is LT1008IN8 the same as LT1008CN8?
The LT1008IN8 and LT1008CN8 are electrically closely related precision amplifiers in the same PDIP-8 family, but they are not identical temperature grades. LT1008IN8 is specified from -55°C to 125°C, whereas LT1008CN8 is intended for commercial-temperature operation. Use LT1008CN8 as a direct board-level substitute only when the required operating-temperature range is satisfied.
What is the best Analog Devices equivalent for LT1008IN8?
The closest confirmed Analog Devices family equivalent for an unchanged LT1008IN8 PCB is LT1008CN8, which retains the 8-pin PDIP footprint and closely matches the precision-amplifier functions while using a commercial temperature grade. If the original circuit requires operation from -55°C to 125°C, retain LT1008IN8 or obtain an explicitly temperature-rated replacement rather than substituting solely by function.

Dữ liệu tham khảo kỹ thuật cho LT1008IN8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select LT1008IN8 when the design requires the combination of picoampere input bias current, microvolt-level offset, low noise, high common-mode rejection, and operation from -55°C to 125°C. It is especially appropriate for high-impedance sensors, photodiode amplifiers, precision current measurements, electrochemical instrumentation, and laboratory equipment. LT1008CN8 is the practical same-footprint alternative when its -40°C to 85°C commercial range fully covers the intended environment and no extended-temperature qualification is necessary. Do not substitute surface-mount or SOIC-package amplifiers solely because their headline offset specifications look similar; those packages require different PCB footprints. If low bias current is not important, a faster or lower-cost amplifier may be adequate, but it can materially worsen high-source-impedance accuracy.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LT1008CN8
Brand Analog Devices Analog Devices
Package PDIP-8 PDIP-8
Amplifier Type Precision operational amplifier Precision operational amplifier
Number of Circuits 1 1
Supply Voltage Range ±3 V to ±18 V ±3 V to ±18 V
Input Offset Voltage 320 µV maximum 320 µV maximum
Input Bias Current 50 pA typical 50 pA typical
Input Voltage Noise Density 7.5 nV/√Hz at 1 kHz 7.5 nV/√Hz at 1 kHz
Open-Loop Gain 120 dB typical 120 dB typical
Operating Temperature Range -55°C to 125°C -40°C to 85°C
Output Drive Current 5 mA 5 mA
Mounting Type Through-hole Through-hole

Bảo phân biệt quan trọng

  • Very low input bias for accurate high-impedance measurements (vsLT1008CN8)
  • Extended industrial temperature operation (vsLT1008CN8)
  • Precision offset and noise for small-signal amplification (vsLT1008CN8)

Ghi chú thiết kế

Keep the inverting input and feedback component directly adjacent to pins 2 and 6, and route the non-inverting input on pin 3 away from supply, clock, and high-current traces. For high-impedance sources, shorten the input node, remove solder flux and contamination, and use a grounded guard where practical. PCB leakage can become comparable to the LT1008IN8's picoampere input bias current, so a clean board is part of the precision design rather than a manufacturing detail.

Place the supply-bypass capacitor close to pins 7 and 4 and provide a low-impedance ground return. Keep both supply rails within the ±3 V to ±18 V operating range and observe the 36 V maximum total supply voltage. Although the LT1008 has 110 dB typical power-supply rejection, that performance depends on clean local bypassing and a stable reference; excessive supply ripple or slow power-up can still create transient errors and possible saturation.

Do not choose an amplifier merely because its input offset is lower; verify input bias current, noise, common-mode range, output swing, supply range, and temperature grade. The LT1008IN8 is a precision, relatively low-bandwidth device with an 800 kHz gain-bandwidth product, so it should not be expected to replace a wideband amplifier. Conversely, a general-purpose op amp with acceptable offset may still introduce excessive leakage and noise in a picoampere measurement.

Account for input offset, offset drift, bias-current error, resistor tolerance, and temperature in the measurement uncertainty budget. With a feedback or sense resistance of R, the voltage error caused by 50 pA typical bias current is approximately 50 pA multiplied by R; for 1 GΩ, that is 50 µV. Use high-quality, stable resistors and consider input-offset calibration where the measurement resolution demands it.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available manufacturer and distributor descriptions identify the device and its precision-amplifier characteristics but do not provide explicit compliance declarations.

Tìm kiếm liên quan

LT1008IN8 datasheet LT1008IN8 datasheet pdf LT1008IN8 pinout LT1008IN8 equivalent LT1008IN8 replacement LT1008IN8 cross reference LT1008IN8 vs LT1008CN8 LT1008IN8 price LT1008IN8 stock Analog Devices LT1008IN8 LT1008IN8 PDIP-8 amplifier LT1008IN8 sensor amplifier

Các bộ phận và thuật ngữ liên quan

Analog Devices LT1008IN8 LT1008CN8 LT1008 precision operational amplifier operational amplifier analog amplifier amplifier IC picoampere input bias current input offset voltage input voltage noise common-mode rejection ratio power-supply rejection ratio open-loop gain PDIP-8 through-hole package high-impedance sensor photodiode amplifier strain-gauge bridge electrochemical instrumentation precision current measurement bipolar operational amplifier gain-bandwidth product offset drift
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ