M2GL025-FCS325I - 27.6K LEs, 180 I/O IGLOO2 FPGA | Microchip
MPN: M2GL025-FCS325I ✓ Hoạt độngM2GL025-FCS325I Tóm tắt
An FPGA is a programmable semiconductor in which digital logic and I/O behavior are defined after fabrication. The IGLOO2 family belongs to the broader hierarchy of programmable logic devices, combining configurable logic, embedded memory, programmable I/O, and configuration capabilities in one device. This makes the M2GL025-FCS325I suitable when fixed-function controllers cannot accommodate evolving interface, control, or protocol requirements.
The device provides 27.6K logic elements, 180 I/O, and a 1.2 V-based IGLOO2 configuration identified in Microchip product information. Its programmable architecture allows designers to implement parallel data processing, glue logic, interface adaptation, and supervisory functions. The 180-I/O count also provides substantial connectivity for buses, converters, counters, and control signals within compact embedded systems.
The 325-pin FCBGA package supports dense PCB routing for mixed-signal and multi-interface designs. Microchip specifically identifies the IGLOO2 family as suitable for communications, industrial, and embedded applications. Its reprogrammability reduces the need for multiple fixed-function logic devices when system requirements evolve during development or field updates.
Typical uses include communication bridges, industrial I/O expansion, protocol conversion, system management, control-plane logic, and secure-connectivity support. These applications benefit from parallel hardware implementation and configurable I/O rather than relying entirely on processor software for timing-sensitive or highly concurrent operations.
PCB implementation requires careful BGA-layout, power-integrity, and thermal planning. Follow the manufacturer’s IGLOO2 pin-information document for bank assignments and mechanical details, and validate the PCB stack-up, escape routing, and power distribution against the selected configuration before fabrication.
This page combines manufacturer status information, verified distributor records, package details, application guidance, and available same-family migration choices. It also distinguishes the FCBGA target from alternatives that use different packages or package-related ordering codes, helping engineers avoid parts that require board changes.
Bộ thay thế dễ dàng lắp đặt cho M2GL025-FCS325I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với M2GL025-FCS325I (cùng hình factor và footprint) — khác nhau ở Device Type, Package.
M2GL025-FCSG325I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL025T-FCS325I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL025TS-FCS325I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL025-1FCS325I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL025-FCS325I Tỷ lệ tối đa & tính chất điện
| Device Type | IGLOO2 low-density FPGA |
| Logic Elements | 27.6K LEs |
| Nominal Logic Cell Count | 27,696 cells |
| I/O Count | 180 I/O |
| Hộp | 325-pin FCBGA |
| Package Description | 325-TFBGA, FCBGA |
| Core Supply Voltage | 1.2 V |
| Programmable Logic Type | Flash-configured FPGA |
| Manufacturer | Microchip Technology |
| Trạng thái vòng đời | In Production |
| Device Family | IGLOO2 |
| Product Category | Low-density FPGA |
| RoHS Compliance | Compliant |
| REACH Compliance | Compliant |
| DRC Status | DRC Conflict Free |
Hướng dẫn cấu hình chân M2GL025-FCS325I 325-tfbga, fcbga
Cấu hình chân cho M2GL025-FCS325I (325-tfbga, fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M2GL025-FCS325I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M2GL025-FCS325I phù hợp cho 6 Áp dụngs: Communication Interface Bridging, Industrial I/O Expansion, Data Format Conversion, System Management Logic, Secure Connectivity Support, Programmable Control Plane.
Communication Interface Bridging
The M2GL025-FCS325I fits communication bridging because it combines 27.6K logic elements with 180 programmable I/O in one 325-pin FCBGA device. Parallel data paths, protocol converters, and endpoint adaptation can be implemented as dedicated logic instead of adding multiple fixed-function interface ICs. This architecture can reduce component count while allowing interface behavior to be revised through configuration updates. The 180 I/O also provides substantial board-level connectivity for data buses, control signals, clocking, and status indication. Before layout release, engineers should assign banks and power pins using the manufacturer’s FCS325 pin-description document, then validate timing against the specific external interface. The 1.2 V core architecture supports modern low-voltage programmable logic, but board-level signal levels, termination, and I/O standards remain board-specific requirements.
Được đề xuất
Industrial I/O Expansion
The M2GL025-FCS325I is appropriate for industrial I/O expansion when a system needs many discrete control and monitoring functions around a host processor. Its 180 I/O can absorb parallel input conditioning, output multiplexing, interlock logic, and status decoding without consuming processor execution time. The 27.6K logic-element capacity permits several independent control blocks and state machines to coexist on one programmable device. In an industrial design, engineers can isolate field-side signals through the FPGA I/O banks while implementing debounce, latch, and conversion functions in logic. Validate bank voltage limits, input tolerances, and industrial temperature requirements for the exact ordering suffix. The 325-pin FCBGA footprint also demands careful via-in-pad or escape-routing strategy, layer transitions, and power-plane integrity during PCB stack-up design.
Được đề xuất
Data Format Conversion
Parallel-to-serial, serial-to-parallel, byte-order, and packing conversions can be implemented efficiently with the M2GL025-FCS325I. The device offers 27.6K logic elements for datapath pipelines, counters, and control state, while 180 I/O provide enough connectivity to connect parallel sources to narrow high-speed destinations. Running conversion in hardware can provide deterministic timing and remove repetitive formatting tasks from a host processor. Engineers should use the manufacturer’s clock and timing guidance to define pipeline stages, constrain interface logic, and account for board-level skew. The 1.2 V core supply makes careful power sequencing and decoupling essential, especially in dense BGA layouts. Confirm the exact I/O standards and performance grade of the selected suffix before treating the implementation as production-ready.
Được đề xuất
System Management Logic
The M2GL025-FCS325I can serve as a dedicated system-management controller for power sequencing, watchdog functions, fault logging, reset distribution, and health monitoring. With 27.6K logic elements and 180 I/O, it can collect multiple status inputs and implement deterministic control outputs independently of the main processor. This separation can improve fault containment and make board behavior easier to update through FPGA configuration. Designers should define startup states, safe-output defaults, and reset behavior explicitly, especially where incorrect sequencing could damage external hardware. Use the IGLOO2 pin-description document to identify configuration, clock, and I/O assignments. Because the device is supplied in a 325-pin FCBGA package, power and ground distribution must be planned alongside signal escape routing to prevent simultaneous switching noise from affecting sensitive management functions.
Được đề xuất
Secure Connectivity Support
The M2GL025-FCS325I fits secure-connectivity support by combining programmable interface logic, protocol handling, and device-specific control functions in a compact low-density FPGA. Its 27.6K logic elements can support endpoint adaptation, key-related state machines, command checking, and glue logic while 180 I/O connect the device to communications and security peripherals. Such a design should partition sensitive functions deliberately and use Microchip’s programming and configuration recommendations to protect implementation access. Engineers must also validate the available configuration mechanism, authentication features, and update procedure for the exact device revision. The 325-pin FCBGA package requires disciplined thermal and return-path planning; high-speed or sensitive nets should be routed with controlled reference planes and verified through post-layout signal-integrity analysis.
Được đề xuất
Programmable Control Plane
A programmable control plane built around the M2GL025-FCS325I can combine command decoding, event logging, arbitration, and deterministic actuator control. The 27.6K logic elements allow parallel implementation of multiple finite-state machines, while 180 I/O support direct connections to processors, sensors, relays, and status registers. This makes the FPGA useful where deterministic hardware timing or autonomous control is more important than software flexibility. For safety-related or mission-critical use, verify the exact device grade and applicable qualification requirements rather than assuming them from the IGLOO2 family name. PCB planning should include the FCS325 ball map, adequate decoupling, robust ground connectivity, and thermal paths through the BGA array. Configuration retention, startup behavior, and fault reaction should also be validated under the intended power conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M2GL025-FCS325I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M2GL025-FCSG325I | M2GL025T-FCS325I | M2GL025TS-FCS325I | M2GL025-1FCS325I |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 325-pin FCBGA | 325-pin FCBGA | 325-TFBGA, FCBGA | 325-pin FCBGA | 325-BGA |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 27.6K LEs | 27.6K LEs | 27,696 cells | 27.6K LEs | 27,696 cells |
| I/O Count | 180 I/O | 180 I/O | 180 I/O | 180 I/O | 180 I/O |
Bảo phân biệt quan trọng
- Exact 27,696-cell IGLOO2 logic configuration in the requested FCS325 footprint (vsM2GL050-1VF400)
- No cross-manufacturer substitution is needed for same-family sourcing (vsM2GL025-FCSG325I)
- High I/O availability for parallel interfaces and control functions (vsM2GL025-1FCS325I)
- Manufacturer lists the M2GL025 family as in production (vsM2GL025-FCSG325I)
Ghi chú thiết kế
Use the manufacturer’s FCS325 pin-description and package documents as the controlling references for ball assignment. A 325-ball FCBGA requires deliberate escape-routing strategy, pad- and via-in-pad decisions, and a stack-up that supports the required I/O density. Do not infer power, ground, configuration, or I/O positions from another 325-ball device; bank and voltage assignments are device-specific and can invalidate an otherwise compatible-looking footprint.
Plan a low-impedance power distribution network around the device’s ball groups and place decoupling capacitors according to the manufacturer’s power and layout guidance. The IGLOO2 family uses a 1.2 V core architecture, so supply sequencing, return paths, and simultaneous-switching-noise control materially affect logic margin. Validate rail tolerances, startup behavior, and power-state transitions in simulation and hardware before production release.
Keep sensitive configuration and clock routes away from aggressive switching nets, and provide continuous reference planes where the design rules permit. Review BGA escape vias for differential-pair geometry and impedance tolerance, then include via transitions in signal-integrity simulations. Because the 325-pin FCBGA footprint is dense, coordinate assembly constraints, component placement, and thermal-via placement before routing begins rather than revising them after logic placement is complete.
Do not treat related M2GL025 suffix codes as automatically interchangeable. The T, TS, G, and -1 ordering forms may reflect packing, grade, speed, or commercial conditions that affect procurement or qualification. Compare the complete ordering information, verify the exact package, confirm operating-temperature limits, and check device status for each candidate before approving a replacement in a released BOM or PCB design.
Thông tin tuân thủ
RoHS and REACH compliance are attributed to the M2GL025-FCSG325I family record. AEC-Q100 status, lead-free status, halogen-free status, and conflict-minerals status are not confirmed for the exact target ordering code. A product labeled as an FPGA is not inherently automotive-qualified.