M2GL060-FCSG325 - 56.5K LEs, 200 I/O FPGA | Microchip
MPN: M2GL060-FCSG325 ✓ Hoạt độngM2GL060-FCSG325 Tóm tắt
An FPGA is a digital semiconductor whose logic, interconnect, and I/O behavior can be configured after manufacture. Within the product hierarchy, the M2GL060-FCSG325 is a low-density FPGA in the IGLOO2 family, a member of the broader configurable-logic and programmable-logic semiconductor category. Its primary role is implementing digital control, interface, bridging, signal-conversion, and system-management functions without changing the PCB when logic requirements change.
The device provides 56,520 logic elements and 200 I/O. It is identified as an IGLOO2 device with a 1.2 V supply and a 325-ball FCBGA package. The manufacturer lists the M2GL060 as being in production and identifies it for general-purpose functions such as bridging, I/O expansion, conversion, system management, and secure connectivity. The manufacturer also identifies communications, industrial, and medical-market uses for Microchip FPGAs.
Because the FCBGA package uses an area-array footprint, PCB design must account for ball assignment, power distribution, decoupling, and escape-routing constraints. The Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide is the appropriate document for bank assignments, package mechanics, and individual pin functions. Unlike a mask-programmed ASIC, the M2GL060 permits design changes to be implemented through configuration programming after the PCB has been fabricated.
Typical implementations include industrial control logic, communications interfaces, sensor and I/O expansion, protocol bridging, data conversion, embedded system management, and secure connectivity. These applications benefit from parallel programmable logic, deterministic I/O resources, and the ability to revise functionality during product development or lifecycle maintenance.
When designing around this FPGA, verify the complete ball map and supported I/O standards before schematic capture. Confirm power rails and decoupling against the manufacturer data sheet, then reserve the programming interface and configuration mechanism on the PCB. This page combines the exact ordering information, manufacturer status, device resources, packaging details, and application guidance engineers need for initial device selection.
Bộ thay thế dễ dàng lắp đặt cho M2GL060-FCSG325 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với M2GL060-FCSG325 (cùng hình factor và footprint) — khác nhau ở Ball Count, Device Type, Logic Elements, Package.
M2GL060-FCSG325I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060TS-FCSG325
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060T-FCSG325
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060-FCS325
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M2GL060-FCSG325 Tỷ lệ tối đa & tính chất điện
| Device Type | Low-density FPGA |
| FPGA Family | IGLOO2 |
| Logic Elements | 56,520 |
| I/O Count | 200 |
| Core Supply Voltage | 1.2 V |
| Hộp | 325-pin FCBGA |
| Ball Count | 325 |
| Package Form | Square FCBGA |
| Terminal Type | Ball |
| Programmability | Field-programmable logic and I/O |
| Primary Functions | Bridging, I/O expansion, conversion, system management, and secure connectivity |
| Manufacturer Lifecycle Status | In production |
Hướng dẫn cấu hình chân M2GL060-FCSG325 square fcbga
Cấu hình chân cho M2GL060-FCSG325 (square fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M2GL060-FCSG325.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M2GL060-FCSG325 phù hợp cho 6 Áp dụngs: Industrial Control Logic, Communications Protocol Bridging, Sensor and I/O Expansion, Data Conversion and Signal Conditioning, Embedded System Management, Secure Connectivity.
Industrial Control Logic
The M2GL060-FCSG325 fits industrial control designs that combine parallel state-machine logic, I/O conditioning, and supervisory functions. Its 56,520 logic elements provide substantial parallel processing capacity, while 200 I/O support connections to sensors, actuators, and communication transceivers. The 325-pin FCBGA allows high pin density on a compact board, although escape routing and power delivery require careful PCB planning. For a production design, verify the exact temperature grade, supported I/O standards, clock limits, and power requirements. Firmware changes can implement revised control sequences without respinning the board, making the device useful for long-lived machinery where field updates are valuable.
Được đề xuất
Communications Protocol Bridging
The M2GL060-FCSG325 can implement parallel protocol conversion and data-format bridging between systems that use different interfaces. Its 56,520 logic elements are suitable for state machines, buffering, byte alignment, and clock-domain coordination, while 200 I/O provide substantial connectivity for parallel buses and control signals. In a communications appliance, the FPGA can sit between a processor and a physical-layer device, reducing the need for multiple fixed-function bridge chips. Design the interface around the manufacturer’s supported I/O standards and pin constraints, and verify timing closure for the selected transfer rates. Because configuration can be updated, field-provisioned bridges can be revised to support a changed protocol or board variant without a PCB respin.
Được đề xuất
Sensor and I/O Expansion
The M2GL060-FCSG325 is well suited to adding programmable acquisition, control, and expansion functions to a base processor or microcontroller. The 200 available I/O can accommodate multiple digital sensor channels, interlocks, status indicators, actuators, or external bus interfaces, while 56,520 logic elements can combine acquisition control, filtering, and protocol handling in one device. Its role is especially useful when several sensors have different timing or conversion requirements. The compact 325-pin FCBGA reduces board area compared with multiple discrete logic packages, but every ball assignment must be checked against the IGLOO 2 packaging guide. Validate signal-integrity margins, supported voltage standards, and power sequencing before releasing the PCB layout.
Được đề xuất
Data Conversion and Signal Conditioning
The M2GL060-FCSG325 can implement programmable data-width conversion, parallel-to-serial logic, serial-to-parallel reconstruction, and signal-format conditioning. Its 56,520 logic elements allow converters and buffering logic to be consolidated, and the 200 I/O support simultaneous data paths and control signals. In an acquisition or test system, the FPGA may translate between an internal parallel bus and an external interface while adding framing or validation logic. The 325-pin FCBGA supplies enough connections for wide data paths and control. Achieve reliable operation by constraining input and output timing, selecting only supported I/O configurations, and testing worst-case clock and data-valid arrangements. Reconfigurability allows converters to be adapted as interface requirements evolve.
Được đề xuất
Embedded System Management
The M2GL060-FCSG325 can serve as a dedicated system-management controller for power sequencing, reset coordination, health monitoring, watchdog behavior, and configuration supervision. Its 56,520 logic elements are more than sufficient for deterministic supervisory logic, while 200 I/O enable monitoring across multiple rails, sensors, and status signals. This arrangement reduces the burden on an application processor and allows central management functions to remain operational even when higher-level software is inactive. In a compact embedded controller, the 325-pin FCBGA accommodates the high I/O count and power-management connections. Confirm startup behavior, supported I/O levels, and configuration dependencies in the data sheet, and implement fail-safe defaults for every externally controlled reset or enable signal.
Được đề xuất
Secure Connectivity
The M2GL060-FCSG325 can support secure-connectivity functions such as protocol framing, access-control state machines, command filtering, and interface isolation in programmable-logic designs. With 56,520 logic elements and 200 I/O, it can combine multiple narrow and wide interfaces while keeping configurable logic close to the connector or transceiver. The 1.2 V IGLOO2 architecture supports integration into compact industrial, communications, and embedded systems. A production implementation should establish trusted configuration data, protect configuration interfaces, and verify reset behavior so external signals cannot bypass policy logic. Review the exact supported I/O standards and timing constraints for each bank, and validate that the selected thermal and qualification grade matches the deployment environment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M2GL060-FCSG325 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M2GL060-FCSG325I | M2GL060TS-FCSG325 | M2GL060T-FCSG325 | M2GL060-FCS325 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 325-pin FCBGA | 325-pin FCBGA | 325-pin FCBGA | 325-pin FCBGA | 325-pin FCBGA |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 56,520 | 56,520 | 56,520 | 56,520 | 56,520 |
| I/O Count | 200 | 200 | 200 | 200 | 200 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Programmable Device Class | Low-density FPGA | Low-density FPGA | Low-density FPGA | Low-density FPGA | Low-density FPGA |
| Terminal Type | Ball | Ball | Ball | Ball | Ball |
Bảo phân biệt quan trọng
- Combines 56,520 logic elements with 200 I/O in one 325-ball package (vsM2GL060-FCSG325I)
- High I/O density for programmable integration (vsM2GL060-FCS325)
- In-production low-density IGLOO2 platform (vsM2GL060TS-FCSG325)
Ghi chú thiết kế
Assign the PCB footprint directly from the Microchip IGLOO 2 packaging documentation for the 325-pin FCBGA. Do not substitute a generic 325-ball BGA symbol without checking ball pitch, ball matrix, power balls, and package-specific keep-outs. Place configuration, clock, and decoupling connections according to the manufacturer recommendations before signal routing begins.
Plan the 1.2 V rail and its decoupling around the manufacturer’s power architecture. Confirm which supply balls belong to each bank and whether auxiliary rails are required. Use the recommended capacitance and placement directly from the device data sheet; excessive trace resistance or loop area can compromise switching-noise and signal-integrity performance even when the nominal voltage is correct.
Organize I/O by voltage, timing, and bank constraints before assigning FPGA balls. Reserve short, symmetric escape routes for clocks, keep sensitive interfaces away from high-slew switching outputs, and control return paths through the plane network. The 200 available I/O do not imply that every pin can be used simultaneously at the same voltage or standard.
Do not treat related ordering suffixes as automatically interchangeable. Although the listed M2GL060 variants retain the same 56,520 logic elements, 200 I/O, and 325-pin FCBGA configuration, suffix-specific temperature, qualification, or performance conditions may differ. Compare the exact ordering tables and data sheets before approving any substitution in a released design.
Thông tin tuân thủ
The manufacturer product page confirms in-production status but does not provide the requested compliance declarations in the retrieved material.