M2GL060-FCSG325 - 56.5K LEs, 200 I/O FPGA | Microchip
MPN: M2GL060-FCSG325 ✓ 啟用中M2GL060-FCSG325 概覽
An FPGA is a digital semiconductor whose logic, interconnect, and I/O behavior can be configured after manufacture. Within the product hierarchy, the M2GL060-FCSG325 is a low-density FPGA in the IGLOO2 family, a member of the broader configurable-logic and programmable-logic semiconductor category. Its primary role is implementing digital control, interface, bridging, signal-conversion, and system-management functions without changing the PCB when logic requirements change.
The device provides 56,520 logic elements and 200 I/O. It is identified as an IGLOO2 device with a 1.2 V supply and a 325-ball FCBGA package. The manufacturer lists the M2GL060 as being in production and identifies it for general-purpose functions such as bridging, I/O expansion, conversion, system management, and secure connectivity. The manufacturer also identifies communications, industrial, and medical-market uses for Microchip FPGAs.
Because the FCBGA package uses an area-array footprint, PCB design must account for ball assignment, power distribution, decoupling, and escape-routing constraints. The Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide is the appropriate document for bank assignments, package mechanics, and individual pin functions. Unlike a mask-programmed ASIC, the M2GL060 permits design changes to be implemented through configuration programming after the PCB has been fabricated.
Typical implementations include industrial control logic, communications interfaces, sensor and I/O expansion, protocol bridging, data conversion, embedded system management, and secure connectivity. These applications benefit from parallel programmable logic, deterministic I/O resources, and the ability to revise functionality during product development or lifecycle maintenance.
When designing around this FPGA, verify the complete ball map and supported I/O standards before schematic capture. Confirm power rails and decoupling against the manufacturer data sheet, then reserve the programming interface and configuration mechanism on the PCB. This page combines the exact ordering information, manufacturer status, device resources, packaging details, and application guidance engineers need for initial device selection.
直接替換替代品,適用於 M2GL060-FCSG325 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: M2GL060-FCSG325 (相同外形與佔位) — 差異在於 Ball Count, Device Type, Logic Elements, Package.
M2GL060-FCSG325I
✅ 直接替換📋 參考替代品(不在目錄中)
M2GL060TS-FCSG325
✅ 直接替換📋 參考替代品(不在目錄中)
M2GL060T-FCSG325
✅ 直接替換📋 參考替代品(不在目錄中)
M2GL060-FCS325
✅ 直接替換聯絡詢價
查看資料表 →M2GL060-FCSG325 最大額定值與電氣特性
| Device Type | Low-density FPGA |
| FPGA Family | IGLOO2 |
| Logic Elements | 56,520 |
| I/O Count | 200 |
| Core Supply Voltage | 1.2 V |
| 封裝 | 325-pin FCBGA |
| Ball Count | 325 |
| Package Form | Square FCBGA |
| Terminal Type | Ball |
| Programmability | Field-programmable logic and I/O |
| Primary Functions | Bridging, I/O expansion, conversion, system management, and secure connectivity |
| Manufacturer Lifecycle Status | In production |
M2GL060-FCSG325 square fcbga 腳位配置指南
M2GL060-FCSG325(square fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: M2GL060-FCSG325.
請參閱 資料表 以查看完整腳位配置。
典型應用
M2GL060-FCSG325 適用於 6 應用s: Industrial Control Logic, Communications Protocol Bridging, Sensor and I/O Expansion, Data Conversion and Signal Conditioning, Embedded System Management, Secure Connectivity.
Industrial Control Logic
The M2GL060-FCSG325 fits industrial control designs that combine parallel state-machine logic, I/O conditioning, and supervisory functions. Its 56,520 logic elements provide substantial parallel processing capacity, while 200 I/O support connections to sensors, actuators, and communication transceivers. The 325-pin FCBGA allows high pin density on a compact board, although escape routing and power delivery require careful PCB planning. For a production design, verify the exact temperature grade, supported I/O standards, clock limits, and power requirements. Firmware changes can implement revised control sequences without respinning the board, making the device useful for long-lived machinery where field updates are valuable.
推薦
Communications Protocol Bridging
The M2GL060-FCSG325 can implement parallel protocol conversion and data-format bridging between systems that use different interfaces. Its 56,520 logic elements are suitable for state machines, buffering, byte alignment, and clock-domain coordination, while 200 I/O provide substantial connectivity for parallel buses and control signals. In a communications appliance, the FPGA can sit between a processor and a physical-layer device, reducing the need for multiple fixed-function bridge chips. Design the interface around the manufacturer’s supported I/O standards and pin constraints, and verify timing closure for the selected transfer rates. Because configuration can be updated, field-provisioned bridges can be revised to support a changed protocol or board variant without a PCB respin.
推薦
Sensor and I/O Expansion
The M2GL060-FCSG325 is well suited to adding programmable acquisition, control, and expansion functions to a base processor or microcontroller. The 200 available I/O can accommodate multiple digital sensor channels, interlocks, status indicators, actuators, or external bus interfaces, while 56,520 logic elements can combine acquisition control, filtering, and protocol handling in one device. Its role is especially useful when several sensors have different timing or conversion requirements. The compact 325-pin FCBGA reduces board area compared with multiple discrete logic packages, but every ball assignment must be checked against the IGLOO 2 packaging guide. Validate signal-integrity margins, supported voltage standards, and power sequencing before releasing the PCB layout.
推薦
Data Conversion and Signal Conditioning
The M2GL060-FCSG325 can implement programmable data-width conversion, parallel-to-serial logic, serial-to-parallel reconstruction, and signal-format conditioning. Its 56,520 logic elements allow converters and buffering logic to be consolidated, and the 200 I/O support simultaneous data paths and control signals. In an acquisition or test system, the FPGA may translate between an internal parallel bus and an external interface while adding framing or validation logic. The 325-pin FCBGA supplies enough connections for wide data paths and control. Achieve reliable operation by constraining input and output timing, selecting only supported I/O configurations, and testing worst-case clock and data-valid arrangements. Reconfigurability allows converters to be adapted as interface requirements evolve.
推薦
Embedded System Management
The M2GL060-FCSG325 can serve as a dedicated system-management controller for power sequencing, reset coordination, health monitoring, watchdog behavior, and configuration supervision. Its 56,520 logic elements are more than sufficient for deterministic supervisory logic, while 200 I/O enable monitoring across multiple rails, sensors, and status signals. This arrangement reduces the burden on an application processor and allows central management functions to remain operational even when higher-level software is inactive. In a compact embedded controller, the 325-pin FCBGA accommodates the high I/O count and power-management connections. Confirm startup behavior, supported I/O levels, and configuration dependencies in the data sheet, and implement fail-safe defaults for every externally controlled reset or enable signal.
推薦
Secure Connectivity
The M2GL060-FCSG325 can support secure-connectivity functions such as protocol framing, access-control state machines, command filtering, and interface isolation in programmable-logic designs. With 56,520 logic elements and 200 I/O, it can combine multiple narrow and wide interfaces while keeping configurable logic close to the connector or transceiver. The 1.2 V IGLOO2 architecture supports integration into compact industrial, communications, and embedded systems. A production implementation should establish trusted configuration data, protect configuration interfaces, and verify reset behavior so external signals cannot bypass policy logic. Review the exact supported I/O standards and timing constraints for each bank, and validate that the selected thermal and qualification grade matches the deployment environment.
推薦
推薦產品摘要
工程參考資料,適用於 M2GL060-FCSG325 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | M2GL060-FCSG325I | M2GL060TS-FCSG325 | M2GL060T-FCSG325 | M2GL060-FCS325 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 325-pin FCBGA | 325-pin FCBGA | 325-pin FCBGA | 325-pin FCBGA | 325-pin FCBGA |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 56,520 | 56,520 | 56,520 | 56,520 | 56,520 |
| I/O Count | 200 | 200 | 200 | 200 | 200 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Programmable Device Class | Low-density FPGA | Low-density FPGA | Low-density FPGA | Low-density FPGA | Low-density FPGA |
| Terminal Type | Ball | Ball | Ball | Ball | Ball |
主要差異化特點
- Combines 56,520 logic elements with 200 I/O in one 325-ball package (對比M2GL060-FCSG325I)
- High I/O density for programmable integration (對比M2GL060-FCS325)
- In-production low-density IGLOO2 platform (對比M2GL060TS-FCSG325)
設計說明
Assign the PCB footprint directly from the Microchip IGLOO 2 packaging documentation for the 325-pin FCBGA. Do not substitute a generic 325-ball BGA symbol without checking ball pitch, ball matrix, power balls, and package-specific keep-outs. Place configuration, clock, and decoupling connections according to the manufacturer recommendations before signal routing begins.
Plan the 1.2 V rail and its decoupling around the manufacturer’s power architecture. Confirm which supply balls belong to each bank and whether auxiliary rails are required. Use the recommended capacitance and placement directly from the device data sheet; excessive trace resistance or loop area can compromise switching-noise and signal-integrity performance even when the nominal voltage is correct.
Organize I/O by voltage, timing, and bank constraints before assigning FPGA balls. Reserve short, symmetric escape routes for clocks, keep sensitive interfaces away from high-slew switching outputs, and control return paths through the plane network. The 200 available I/O do not imply that every pin can be used simultaneously at the same voltage or standard.
Do not treat related ordering suffixes as automatically interchangeable. Although the listed M2GL060 variants retain the same 56,520 logic elements, 200 I/O, and 325-pin FCBGA configuration, suffix-specific temperature, qualification, or performance conditions may differ. Compare the exact ordering tables and data sheets before approving any substitution in a released design.
合規資訊
The manufacturer product page confirms in-production status but does not provide the requested compliance declarations in the retrieved material.