M7AFS600-FG484 - Fusion FPGA 600K Gates, ARM CoreMP7 | Microchip
MPN: M7AFS600-FG484 ✓ Hoạt độngM7AFS600-FG484 Tóm tắt
An FPGA (Field Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that designers configure after manufacturing, sitting within the hierarchy of programmable logic between CPLDs and full ASIC implementations. The Fusion family is unique in being a mixed-signal FPGA platform: it integrates flash-based FPGA fabric with configurable analog blocks, making it an alternative to costly mixed-signal ASIC designs.
Key features of the M7AFS600-FG484 include 600K system gates of flash-based fabric, an ARM CoreMP7 soft processor core for embedded control, 172 user I/Os for system interfacing, and 130nm flash technology that retains configuration data in non-volatile memory, eliminating the need for external configuration flash and providing instant-on operation.
Technically, the Fusion architecture combines the ProASIC3-style flash fabric with analog peripherals such as the Analog Compute Engine (ACE), RTC, and PLL support, enabling single-chip system management. The 484-ball FBGA measures 23x23x2.44 mm and uses surface-mount assembly. With a maximum operating frequency around 1098.9 MHz per distributor listings, the device targets control-plane and mixed-signal integration tasks.
Typical applications include embedded system control, industrial automation, power and fan management, portable instrumentation, and space-constrained mixed-signal designs that benefit from on-chip analog monitoring combined with programmable logic.
When designing with this device, note the commercial temperature range of 0C to +70C: for extended-temperature environments, the FG484I variants rated -40C to +100C are the appropriate choice.
This page synthesizes distributor pricing, drop-in alternatives within the Fusion family, and practical design notes not found in any single manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho M7AFS600-FG484 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với M7AFS600-FG484 (cùng hình factor và footprint) — khác nhau ở Package, Configuration Memory, System Gates, Family, Process Technology.
M7AFS600-FGG484
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M7AFS600-FG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M7AFS600-FGG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M7AFS600-1FG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M7AFS600-2FG484
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M1AFS600-FG484
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M1AFS600-1FG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M7AFS600-2FGG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M7AFS600-FG484 Tỷ lệ tối đa & tính chất điện
| Manufacturer Part Number | M7AFS600-FG484 |
| Series | M7AFS600 (Fusion) |
| System Gates | 600K |
| Logic Elements (VersaTiles) | 110592 |
| Number of I/Os | 172 |
| Embedded Processor | ARM CoreMP7 |
| Điện áp cung cấp hoạt động | 1.5 V |
| Technology | 130 nm Flash |
| Maximum Operating Frequency | 1098.9 MHz |
| Hộp / Vỏ | 484-ball FBGA (FG484) |
| Package Dimensions | 23 x 23 x 2.44 mm |
| Minimum Operating Temperature | 0 C |
| Maximum Operating Temperature | +70 C |
| Kiểu lắp đặt | SMD/SMT |
| Packaging | Tray |
| RoHS Compliant | Yes |
| Programmability Type | In-System Programmable (flash-based, non-volatile) |
Hướng dẫn cấu hình chân M7AFS600-FG484 23 x 23 x 2.44 mm
Cấu hình chân cho M7AFS600-FG484 (23 x 23 x 2.44 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M7AFS600-FG484.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M7AFS600-FG484 phù hợp cho 6 Áp dụngs: Embedded System Control, Industrial Automation and Monitoring, Power and Thermal Management, Portable and Battery-Powered Instrumentation, Board-Level System Telemetry, Mixed-Signal ASIC Prototyping.
Embedded System Control
The M7AFS600-FG484 fits embedded controller designs that need both programmable logic and a processor core in one non-volatile device. Its ARM CoreMP7 soft core handles firmware execution while 110592 VersaTiles implement custom peripherals, glue logic, and interfaces around the 172 user I/Os. Because the 130nm flash fabric is instant-on, the system boots with no external configuration device and no boot latency, a key advantage over SRAM-based FPGAs in control applications. Designers typically allocate the fabric to state machines and bus bridging while the processor runs protocol stacks, trading fabric capacity for integration density. The 1.5V core keeps power manageable in always-on controllers.
Được đề xuất
Industrial Automation and Monitoring
In industrial automation, the M7AFS600-FG484 provides sensor interfacing, deterministic control sequencing, and system health supervision on a single chip. The Fusion family's mixed-signal capability allows monitoring of board-level voltages and temperatures through its analog peripherals, while the flash fabric implements motor control timing, I/O expansion, and communication bridging across the 172 I/Os. The commercial 0C to +70C rating suits enclosed cabinet environments; for floor-level installations with wider ambient swings, the pin-compatible M7AFS600-FG484I industrial variant is recommended. Instant-on flash configuration ensures the controller is live within microseconds of power application, which matters for safety interlock logic that must be valid at power-up.
Được đề xuất
Power and Thermal Management
Fusion FPGAs were architected specifically for power and thermal management, and the M7AFS600-FG484 excels in fan control, supply sequencing, and board telemetry roles. The on-chip Analog Compute Engine (ACE) plus RTC offloads routine monitoring tasks from the logic fabric, while the ARM CoreMP7 runs management policies such as PID fan curves and alert handling. The 484-ball FBGA provides enough I/O to drive multiple PWM fans, read tachometer signals, and communicate over I2C/SMBus to host systems. Because configuration is non-volatile, management logic is active immediately at power-on - critical for supervising the main FPGA or CPU rails during brownout and startup sequences.
Được đề xuất
Portable and Battery-Powered Instrumentation
The M7AFS600-FG484 suits portable instrumentation where a single mixed-signal FPGA replaces an MCU plus discrete analog front end. The 1.5V core supply and flash fabric's low static power profile help extend battery life, while the instant-on property lets the instrument take measurements immediately when activated - no configuration load time. The 172 user I/Os connect display, keypad, sensor, and communication interfaces without additional glue logic. Handheld meters, environmental loggers, and portable test gear benefit from integrating the ARM CoreMP7 for UI firmware with VersaTile fabric for measurement timing and trigger logic. Designers should budget the commercial temperature rating against the instrument's specified operating envelope.
Được đề xuất
Board-Level System Telemetry
The M7AFS600-FG484 is well suited to telemetry and health-monitoring subsystems in servers, network equipment, and test systems. Its analog monitoring inputs track multiple supply rails, and the RTC supports timestamped event logging even when main logic is idle. The fabric aggregates I2C/PMBus sensor data, applies alarm thresholds, and reports to a host via UART, SPI, or I2C using the 172 I/Os. Flash-based non-volatile operation means telemetry coverage begins the instant power is applied, capturing faults during power sequencing that SRAM FPGAs miss while loading configuration. The 23x23mm FBGA footprint conserves board area in dense server or blade environments.
Được đề xuất
Mixed-Signal ASIC Prototyping
According to the Fusion family datasheet, Fusion devices provide an excellent alternative to costly and time-consuming mixed-signal ASIC designs, making the M7AFS600-FG484 a strong prototyping and low-volume production platform. Designers implement custom digital logic in 110592 VersaTiles, verify analog monitoring behavior with the ACE block, and iterate in hours instead of the weeks an ASIC mask spin requires. The 484-ball FBGA offers sufficient I/O to emulate realistic ASIC pin counts. When volume scales, the validated design can migrate to an ASIC with confidence, or remain on the FPGA for flexibility. Using the ARM Cortex-M1/CoreMP7 within the fabric also de-risks embedded software before silicon commit.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M7AFS600-FG484 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M7AFS600-FGG484 | M7AFS600-FG484I | M7AFS600-2FG484 | M1AFS600-FG484 |
|---|---|---|---|---|---|
| Package | 484-ball FBGA (FG484) | 484-ball FBGA (FGG484) - same footprint | 484-ball FBGA (FG484) - same footprint | 484-ball FBGA (FG484) - same footprint | 484-ball FBGA (FG484) - same footprint |
| Brand | Microchip Technology (Microsemi Fusion) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600K | 600K | 600K | 600K | 600K |
| I/O Count | 172 | 172 | 172 | 172 | 172 |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Embedded Processor | ARM CoreMP7 | ARM CoreMP7 | ARM CoreMP7 | ARM CoreMP7 | ARM CoreMP7 |
Bảo phân biệt quan trọng
- Fastest standard speed grade of AFS600 in FG484 (vsM7AFS600-2FG484)
- Non-volatile flash fabric eliminates configuration device (vsSRAM-based FPGAs (Xilinx Artix-7 class))
- Mixed-signal integration on-chip (vsM1AFS600-FG484)
Ghi chú thiết kế
The M7AFS600-FG484 runs from a 1.5V core supply with additional I/O bank rails per the Fusion datasheet. Plan a clean 1.5V rail with local bulk and 0.1uF ceramic decoupling at each VCC ball group, and sequence rails per the datasheet power-up requirements. Flash-based fabric draws near-zero configuration current at power-up, so total inrush is dominated by decoupling capacitor charging rather than bitstream loading - useful for battery-powered designs.
The 484-ball FBGA (23x23x2.44 mm, ~1.0 mm ball pitch class) requires a fine-pitch BGA footprint with via-in-pad or dogbone fanout. Follow the Microsemi Fusion PCB layout guidelines for ball map escape routing; inner layers should carry the 1.5V core plane to minimize IR drop across the die. Ensure reflow profiles match lead-free SAC alloy requirements for the RoHS-compliant FG build.
The most common selection error is temperature grade confusion: the FG484 suffix without 'I' is commercial only (0C to +70C). Systems operating below 0C or above 70C must use the pin-compatible -FG484I variants. Also note the datasheet states all devices in the same package are pin compatible EXCEPT the PQ208 package used by AFS250/AFS600 - do not assume PQ208 designs migrate to FG484 without PCB rework.
Thông tin tuân thủ
Newark listing states 'RoHS Compliant: Yes'. FGG-suffix variants denote lead-free/green packaging per Microsemi naming conventions. REACH, halogen-free, and conflict-minerals status not stated in provided data.