Maxim Integrated

MAX232ACWE+ - Dual RS-232 Transceiver | Maxim Integrated

MPN: MAX232ACWE+ ✓ Hoạt động
+5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232ACWE+ Tóm tắt

The Maxim Integrated MAX232ACWE+ is a dual RS-232 line-driver and receiver transceiver packaged in a 16-pin SOIC. It provides two driver channels and two receiver channels for implementing a complete two-channel RS-232 interface from a +5 V supply. The device is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where bipolar ±12 V supplies are unavailable.

An RS-232 transceiver is an interface IC that combines differential line-driver outputs with receiver inputs. It belongs to the communications-interface hierarchy, where a single-ended logic signal is converted into an RS-232-compatible level and an incoming RS-232 signal is converted back into a logic-level voltage. The MAX232ACWE+ uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by the RS-232 line interface.

The principal feature is its combination of two transmitters and two receivers in one 16-pin SOIC. This integration reduces the component count and board area required for a dual-port RS-232 connection. The +5 V operating architecture supports equipment designs in which modern digital logic operates from a single positive supply while the external interface still requires RS-232 voltage levels.

Operationally, the transmitter section converts TTL or CMOS logic signals into RS-232 levels, while the receiver section performs the inverse conversion. The Maxim Integrated MAX220-MAX249 family documentation identifies this family for EIA/TIA-232E and V.28/V.24 interfaces. The MAX232ACWE+ is therefore appropriate for industrial control links, service-console connections, instrumentation, and embedded systems that communicate with legacy RS-232 equipment.

A key design consideration is external bypass capacitance around the charge-pump and supply pins. Place the required capacitors close to their associated package pins, use the shortest practical ground return, and avoid routing the RS-232 driver outputs through unprotected high-impedance nodes. The RS-232 drivers and receivers are intended for wired communication links rather than long-distance high-speed data interfaces.

MAX232ACWE+ is identified in current distributor records as a 2/2 full-RS-232 transceiver in a 16-SOIC package. This page combines the manufacturer-family description, package information, cross-reference records, practical interface guidance, and application-specific engineering considerations for engineers evaluating the MAX232ACWE+ or a compatible replacement.

Bộ thay thế dễ dàng lắp đặt cho MAX232ACWE+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX232ACWE+ (cùng hình factor và footprint) — khác nhau ở Interface Standard, Package, Product Type, Mounting Type, ESD Protection.

Analog Devices
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Package: 16-pin wide SOIC
Product Type: RS-232 line driver/receiver transceiver
So sánh với MAX232ACWE+ →
Analog Devices
Interface Standard: EIA/TIA-232E and CCITT V.28
Package: 16-pin narrow SOIC
Product Type: Dual RS-232 transceiver with integrated charge pump
So sánh với MAX232ACWE+ →
MaxLinear
Mounting Type: Surface mount (SMD/SMT)
ESD Protection: 15 kV on RS-232 pins

MAX232EWE

✅ Drop-In
📦 16-SOIC
Same MAX232 family and 16-SOIC interface; temperature-grade and electrical details require verification against the MAX232ACWE+.

📋 Tham chiếu thay thế (không có trong danh mục)

MAX232CWE+

✅ Drop-In
Analog Devices
📦 16-SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Liên hệ để biết giá

Xem tài liệu →

MAX232EESE+

✅ Drop-In
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

Liên hệ để biết giá

Xem tài liệu →

SP3232EBCN-L/TR

✅ Drop-In
MaxLinear
📦 16-SOIC
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Còn hàng

$0.7711 / Đơn vị

Xem tài liệu →

SP3232EBCN-L/TR

✅ Drop-In
MaxLinear
📦 16-SOIC
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ Còn hàng

$0.7711 / Đơn vị

Xem tài liệu →

MAX232ACWE+ Thông số kỹ thuật

Product Type RS-232 line-driver and receiver transceiver
Driver and Receiver Count 2 transmitters / 2 receivers
Điện áp cung cấp +5 V
Interface Standard EIA/TIA-232E and V.28/V.24
Hộp 16-pin SOIC
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MAX232ACWE+ 16-pin soic

Cấu hình chân cho MAX232ACWE+ (16-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin soic cho MAX232ACWE+

Không có dữ liệu chân cụ thể sẵn có cho MAX232ACWE+.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX232ACWE+ phù hợp cho 6 Áp dụngs: Industrial Controller RS-232 Port, Service and Configuration Console, Test and Measurement Instrumentation, Battery-Powered Portable Equipment, Serial Port Concentrator, Legacy Equipment Upgrade Adapter.

🏭

Industrial Controller RS-232 Port

The MAX232ACWE+ fits a dual-port industrial controller that must expose RS-232 to legacy equipment while operating internally from +5 V logic. Its two transmitters and two receivers provide a complete interface without requiring a separate ±12 V rail. Place the device near the connector and route the driver and receiver nets as a protected differential pair through the enclosure ground path. The 16-SOIC package also makes the part practical for compact controller boards where connector placement and isolation spacing are important. Verify the external charge-pump capacitors, shutdown state, and maximum cable length against the design requirements before production.

🔧

Service and Configuration Console

The MAX232ACWE+ is suitable for a service port connecting embedded equipment to a technician's RS-232 console. Two driver and receiver channels support bidirectional command and diagnostic traffic from a +5 V controller, while the integrated interface level conversion removes the need for discrete bipolar line-driver circuitry. Keep the connector-side interface away from high-current switching nodes and use the board ground as the return path. The established MAX232-family documentation helps designers confirm shutdown behavior, external capacitor requirements, and logic compatibility before releasing a maintenance-oriented product.

🖥️

Test and Measurement Instrumentation

The MAX232ACWE+ can add a legacy RS-232 control or logging port to bench and field test equipment. The +5 V architecture supports instruments built around modern processors and FPGAs, while two transmit and two receive channels can implement two logical RS-232 links. Place the transceiver close to the DB-9 or equivalent connector, minimize stub lengths, and confirm the charge-pump capacitor values from the manufacturer application circuit. The key system trade-off is that RS-232 remains a single-ended, point-to-point interface, so cable routing and common-ground practices remain important.

📱

Battery-Powered Portable Equipment

The MAX232ACWE+ is appropriate for portable equipment that communicates through RS-232 but cannot conveniently provide a bipolar ±12 V supply. The MAX220-MAX249 family description identifies battery-powered systems as a use case, and the device supports shutdown operation for reducing dissipation when the interface is inactive. A power-conscious implementation should place the receiver and transceiver enable paths so unused ports do not prevent the rest of the board from entering its lowest-energy state. Confirm the actual shutdown current, enable polarity, and operating limits in the Maxim Integrated datasheet before finalizing battery-life calculations.

🌐

Serial Port Concentrator

A serial port concentrator can use the MAX232ACWE+ to add two complete RS-232 channels to a +5 V embedded controller. One channel may carry supervisory commands while another carries diagnostic data, reducing the connector count compared with using single-channel transceivers. Because both interfaces share the device's supply and ground infrastructure, maintain a compact return path and decouple the IC close to its pins. Validate that the chosen connector wiring and shield strategy provide suitable surge and ESD protection, since the transceiver's internal line-driver stage should not be treated as a complete external protection network.

🔌

Legacy Equipment Upgrade Adapter

The MAX232ACWE+ is useful in an adapter that lets a modern +5 V control board retain compatibility with legacy RS-232 peripherals. Its 2/2 configuration supports one host-to-device link and a reverse response path within the same 16-pin package. The adapter should preserve the original connector's signal assignment, isolate logic supplies from connector-side transients, and provide a dependable ground reference between connected equipment. Use the family datasheet's typical application diagram to reproduce the charge-pump network and verify that the device's electrical thresholds meet the legacy peripheral's receiver requirements.

Tóm tắt các sản phẩm được đề xuất

MAX232ACWE+ Maxim Integrated Được sử dụng trong: Industrial Controller RS-232 Port, Service and Configuration Console, Test and Measurement Instrumentation, Battery-Powered Portable Equipment, Serial Port Concentrator, Legacy Equipment Upgrade Adapter SP3232EBCN-L MaxLinear Được sử dụng trong: Industrial Controller RS-232 Port, Serial Port Concentrator MAX232EWE Same-family alternative Được sử dụng trong: Service and Configuration Console MAX232CWE Same-family interface alternative Được sử dụng trong: Test and Measurement Instrumentation SP3232EB Pin-compatible low-voltage alternative Được sử dụng trong: Battery-Powered Portable Equipment MAX232EESE+ Analog Devices Được sử dụng trong: Legacy Equipment Upgrade Adapter
What is the MAX232ACWE+?
The MAX232ACWE+ is a dual RS-232 transceiver with two line drivers and two receivers in a 16-pin SOIC package. According to the Maxim Integrated MAX220-MAX249 family documentation, it is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly when a ±12 V supply is unavailable. Its integrated interface circuitry allows a +5 V system to communicate with conventional single-ended RS-232 equipment.
Where can I download the MAX232ACWE+ datasheet?
The MAX232ACWE+ datasheet is available through the Maxim Integrated MAX220-MAX249 family documentation and the component download links listed on this page. The family document defines the transmitters, receivers, charge-pump arrangement, electrical characteristics, and typical interface applications. Use the manufacturer family datasheet for final pin functions, recommended capacitor values, operating limits, and timing information before releasing a production board.
Where can I find the MAX232ACWE+ pinout?
The MAX232ACWE+ uses a 16-pin SOIC footprint, and its complete pin assignment is defined in the Maxim Integrated MAX220-MAX249 family datasheet. Use the pin-description table and typical application circuit to identify supply, ground, charge-pump capacitor, driver-output, receiver-input, and shutdown connections. Assign PCB tracks directly from that table rather than inferring functions from another member of the MAX232 family.
What are the key specifications of MAX232ACWE+ that engineers should know?
The MAX232ACWE+ provides a 2/2 RS-232 interface, operates from a +5 V supply, and is packaged in a 16-pin SOIC. Maxim Integrated describes the MAX220-MAX249 family for EIA/TIA-232E and V.28/V.24 communication interfaces, especially where ±12 V is unavailable. These core facts establish it as a dual-channel logic-to-RS-232 interface rather than a differential RS-485 transceiver.
What can replace the MAX232ACWE+?
The SP3232EBCN-L is identified in the MaxLinear MAX232 cross-reference as a functional equivalent and pin-compatible alternative to the MAX232ACWE+. It provides a 250 kbaud rate and 15 kV ESD protection according to the cross-reference listing. Before substitution, verify the exact SOIC-16 pinout, operating voltage, shutdown behavior, charge-pump capacitor values, and electrical limits against the manufacturer datasheets.
Is the SP3232EBCN-L the same as the MAX232ACWE+?
The SP3232EBCN-L is not an identical part, but the MaxLinear cross-reference lists it as a functional equivalent and pin-compatible substitute for the MAX232ACWE+. The listed SP3232EBCN-L specification includes a 250 kbaud data rate and 15 kV ESD protection. A board-level replacement still requires checking every pin, capacitor, supply limit, and interface threshold relevant to the target design.
MAX232ACWE+ vs SP3232EBCN-L - which is better for an industrial RS-232 port?
The SP3232EBCN-L is the stronger choice when its listed 15 kV ESD protection is important for an exposed industrial port. The MAX232ACWE+ is appropriate when maximum continuity with the established MAX232 design and the Maxim Integrated MAX220-MAX249 documentation is the priority. The SP3232EBCN-L cross-reference specifies 250 kbaud and 15 kV ESD protection, while detailed input thresholds and timing must be checked against each datasheet.
MAX232ACWE+ vs MAX232EWE - which should be selected?
The MAX232EWE should be selected when a Maxim Integrated MAX232-family part with a 16-SOIC interface is preferred and its temperature-grade or lifecycle details better match the product. The MAX232ACWE+ remains the direct target for existing designs qualified around the exact MAX232ACWE+ ordering code. Compare package suffix, temperature range, shutdown implementation, and electrical limits from the manufacturer datasheets before treating either part as interchangeable.
When should I choose MAX232ACWE+ over a generic RS-232 transceiver?
Choose the MAX232ACWE+ when the design needs an established +5 V dual-driver, dual-receiver RS-232 interface in a 16-pin SOIC package and has been qualified around the MAX232 family documentation. It is particularly suitable for industrial controllers, test equipment, and service interfaces that must bridge modern logic levels to RS-232 without a separate ±12 V supply.
Is MAX232ACWE+ suitable for a battery-powered RS-232 device?
The MAX232ACWE+ can support a +5 V, low-power RS-232 design because the MAX220-MAX249 family is intended for systems where ±12 V is unavailable, and the family description identifies battery-powered applications. Its shutdown mode can reduce power dissipation when the interface is unused. Confirm the exact shutdown current, enable logic, and operating temperature range in the manufacturer datasheet before setting the product power budget.
How should the MAX232ACWE+ charge-pump capacitors be placed?
Place every recommended charge-pump capacitor directly between its designated IC pins with the shortest possible traces, and connect the device ground to the board ground through a low-impedance path. Follow the exact capacitor values and connection diagram in the Maxim Integrated family datasheet. Long capacitor loops can increase supply ripple and reduce margin on the generated RS-232 voltage levels.
What is the lead time for MAX232ACWE+?
The current lead time for MAX232ACWE+ should be requested through the Request a Quote form on this page. Distributor records identify the exact component as a 2/2 full-RS-232 transceiver in a 16-SOIC package, but no fixed factory lead time is stated on this page. Include your required quantity, date code, target package suffix, and shipment destination when requesting the quotation.
Is MAX232ACWE+ in stock?
Current stock status for MAX232ACWE+ should be confirmed through the Request a Quote form on this page. Current distributor search records show the part as an orderable 16-SOIC RS-232 transceiver, but inventory changes by package suffix, quantity, and fulfillment location. Submit the exact MPN and required quantity to obtain a current availability and lead-time response.
Where can I buy MAX232ACWE+ online?
Use the Request a Quote form on this page to request MAX232ACWE+ pricing, stock, and lead time from XAIPART. The exact component is identified as a +5 V, 2/2 full-RS-232 transceiver in a 16-pin SOIC package. Including the target quantity and whether tape-and-reel or another approved shipping format is required helps the request match the intended manufacturing build.
What is the best cross-brand equivalent for MAX232ACWE+?
The SP3232EBCN-L is the best directly identified cross-brand candidate because the MaxLinear cross-reference explicitly describes it as a functional equivalent and pin-compatible replacement for the MAX232ACWE+. It also identifies a 250 kbaud rate and 15 kV ESD protection. Final qualification still requires a pin-by-pin and capacitor-value comparison using both manufacturer datasheets.

Dữ liệu tham khảo kỹ thuật cho MAX232ACWE+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MAX232ACWE+ when a design needs the exact +5 V, 2/2 MAX232-family RS-232 interface in a 16-pin SOIC package and has existing design qualification around that ordering code. Consider MAX232EWE, MAX232CWE, or MAX232EESE+ when the same-brand MAX232 family is preferred but temperature grade, lifecycle, or qualification needs require a different suffix; each must be checked against the original datasheet. The SP3232EBCN-L is attractive when the listed 250 kbaud rate or 15 kV ESD protection is important, but it is not an identical component and requires pin, capacitor, threshold, and timing verification. For exposed industrial cables, add suitable external protection regardless of the chosen transceiver. No alternative should be approved solely from its package name or channel count.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX232EWE MAX232CWE SP3232EBCN-L SP3232EB
Brand Maxim Integrated Maxim Integrated Maxim Integrated MaxLinear MaxLinear
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Transceiver Configuration 2/2 full RS-232 2/2 full RS-232 2/2 full RS-232 2/2 RS-232 2/2 RS-232
Pin Compatibility MAX232ACWE+ reference footprint Same-family 16-SOIC footprint Same-family 16-SOIC footprint Pin compatible Pin compatible

Bảo phân biệt quan trọng

  • Exact MAX232ACWE+ family positioning (vsSP3232EBCN-L)
  • Dual full-RS-232 channels in one package (vsSP3232EB)
  • Same-package Maxim Integrated alternatives (vsMAX232EWE)

Ghi chú thiết kế

Place the manufacturer-recommended charge-pump capacitors directly across their designated MAX232ACWE+ pins, with minimal trace length and no test pads or routing branches in the loops. Connect the device ground to the main ground plane through a short path. The small-area capacitor connections reduce switching-loop area and help prevent generated supply noise from disturbing nearby digital or analog circuitry.

Do not substitute a package solely because it has 16 pins. Verify the complete SOIC-16 pin mapping, supply pins, charge-pump nodes, driver outputs, receiver inputs, and shutdown connection before changing the PCB. In particular, confirm that the replacement's external capacitor values and logic levels match the original design rather than relying only on the transceiver channel count.

Route each RS-232 driver and its receiver return as a compact pair where practical, keep the connector and transceiver separated from switching power nodes, and provide external connector-side surge protection for exposed cables. The MAX232ACWE+ performs logic-level conversion, but its internal ESD capability must not be treated as a complete industrial surge-protection network. Validate the interface under the intended cable length and ground conditions.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The MAX232ACWE+ is an industrial and commercial interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer or its current compliance documentation.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

max232acwe datasheet MAX232ACWE+ datasheet MAX232ACWE+ datasheet pdf MAX232ACWE+ pinout MAX232ACWE+ equivalent MAX232ACWE+ replacement MAX232ACWE+ cross reference MAX232ACWE+ vs SP3232EBCN-L MAX232ACWE+ application circuit MAX232ACWE+ price

Các bộ phận và thuật ngữ liên quan

Maxim Integrated MAX232ACWE+ MAX232EWE MAX232CWE MAX232EESE+ SP3232EBCN-L SP3232EB MaxLinear RS-232 transceiver line driver line receiver interface IC communications interface EIA/TIA-232E V.28 V.24 charge-pump voltage converter 16-SOIC SOIC family surface-mount package TTL logic CMOS logic industrial control test and measurement shutdown mode
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ