MAX232ACWE+ - Dual RS-232 Transceiver | Maxim Integrated
料号: MAX232ACWE+ ✓ 量产中MAX232ACWE+ 概述
An RS-232 transceiver is an interface IC that combines differential line-driver outputs with receiver inputs. It belongs to the communications-interface hierarchy, where a single-ended logic signal is converted into an RS-232-compatible level and an incoming RS-232 signal is converted back into a logic-level voltage. The MAX232ACWE+ uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by the RS-232 line interface.
The principal feature is its combination of two transmitters and two receivers in one 16-pin SOIC. This integration reduces the component count and board area required for a dual-port RS-232 connection. The +5 V operating architecture supports equipment designs in which modern digital logic operates from a single positive supply while the external interface still requires RS-232 voltage levels.
Operationally, the transmitter section converts TTL or CMOS logic signals into RS-232 levels, while the receiver section performs the inverse conversion. The Maxim Integrated MAX220-MAX249 family documentation identifies this family for EIA/TIA-232E and V.28/V.24 interfaces. The MAX232ACWE+ is therefore appropriate for industrial control links, service-console connections, instrumentation, and embedded systems that communicate with legacy RS-232 equipment.
A key design consideration is external bypass capacitance around the charge-pump and supply pins. Place the required capacitors close to their associated package pins, use the shortest practical ground return, and avoid routing the RS-232 driver outputs through unprotected high-impedance nodes. The RS-232 drivers and receivers are intended for wired communication links rather than long-distance high-speed data interfaces.
MAX232ACWE+ is identified in current distributor records as a 2/2 full-RS-232 transceiver in a 16-SOIC package. This page combines the manufacturer-family description, package information, cross-reference records, practical interface guidance, and application-specific engineering considerations for engineers evaluating the MAX232ACWE+ or a compatible replacement.
直接替换替代料: MAX232ACWE+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX232ACWE+ (相同外形与封装尺寸) ——差异在于 Interface Standard, Package, Product Type, Mounting Type, ESD Protection.
MAX232EWE
✅ 直接替换📋 参考替代料(不在目录中)
MAX232CWE+
✅ 直接替换联系询价
查看数据手册 →MAX232EESE+
✅ 直接替换联系询价
查看数据手册 →SP3232EBCN-L/TR
✅ 直接替换✓ 有现货
$0.7711 / 个
查看数据手册 →SP3232EBCN-L/TR
✅ 直接替换✓ 有现货
$0.7711 / 个
查看数据手册 →MAX232ACWE+ 规格参数
| Product Type | RS-232 line-driver and receiver transceiver |
| Driver and Receiver Count | 2 transmitters / 2 receivers |
| 电源电压 | +5 V |
| Interface Standard | EIA/TIA-232E and V.28/V.24 |
| 封装 | 16-pin SOIC |
| 安装类型 | Surface mount |
MAX232ACWE+ 16-pin soic 引脚配置指南
MAX232ACWE+(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX232ACWE+.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX232ACWE+ 适用于 6 应用s: Industrial Controller RS-232 Port, Service and Configuration Console, Test and Measurement Instrumentation, Battery-Powered Portable Equipment, Serial Port Concentrator, Legacy Equipment Upgrade Adapter.
Industrial Controller RS-232 Port
The MAX232ACWE+ fits a dual-port industrial controller that must expose RS-232 to legacy equipment while operating internally from +5 V logic. Its two transmitters and two receivers provide a complete interface without requiring a separate ±12 V rail. Place the device near the connector and route the driver and receiver nets as a protected differential pair through the enclosure ground path. The 16-SOIC package also makes the part practical for compact controller boards where connector placement and isolation spacing are important. Verify the external charge-pump capacitors, shutdown state, and maximum cable length against the design requirements before production.
推荐
Service and Configuration Console
The MAX232ACWE+ is suitable for a service port connecting embedded equipment to a technician's RS-232 console. Two driver and receiver channels support bidirectional command and diagnostic traffic from a +5 V controller, while the integrated interface level conversion removes the need for discrete bipolar line-driver circuitry. Keep the connector-side interface away from high-current switching nodes and use the board ground as the return path. The established MAX232-family documentation helps designers confirm shutdown behavior, external capacitor requirements, and logic compatibility before releasing a maintenance-oriented product.
推荐
Test and Measurement Instrumentation
The MAX232ACWE+ can add a legacy RS-232 control or logging port to bench and field test equipment. The +5 V architecture supports instruments built around modern processors and FPGAs, while two transmit and two receive channels can implement two logical RS-232 links. Place the transceiver close to the DB-9 or equivalent connector, minimize stub lengths, and confirm the charge-pump capacitor values from the manufacturer application circuit. The key system trade-off is that RS-232 remains a single-ended, point-to-point interface, so cable routing and common-ground practices remain important.
推荐
Battery-Powered Portable Equipment
The MAX232ACWE+ is appropriate for portable equipment that communicates through RS-232 but cannot conveniently provide a bipolar ±12 V supply. The MAX220-MAX249 family description identifies battery-powered systems as a use case, and the device supports shutdown operation for reducing dissipation when the interface is inactive. A power-conscious implementation should place the receiver and transceiver enable paths so unused ports do not prevent the rest of the board from entering its lowest-energy state. Confirm the actual shutdown current, enable polarity, and operating limits in the Maxim Integrated datasheet before finalizing battery-life calculations.
推荐
Serial Port Concentrator
A serial port concentrator can use the MAX232ACWE+ to add two complete RS-232 channels to a +5 V embedded controller. One channel may carry supervisory commands while another carries diagnostic data, reducing the connector count compared with using single-channel transceivers. Because both interfaces share the device's supply and ground infrastructure, maintain a compact return path and decouple the IC close to its pins. Validate that the chosen connector wiring and shield strategy provide suitable surge and ESD protection, since the transceiver's internal line-driver stage should not be treated as a complete external protection network.
推荐
Legacy Equipment Upgrade Adapter
The MAX232ACWE+ is useful in an adapter that lets a modern +5 V control board retain compatibility with legacy RS-232 peripherals. Its 2/2 configuration supports one host-to-device link and a reverse response path within the same 16-pin package. The adapter should preserve the original connector's signal assignment, isolate logic supplies from connector-side transients, and provide a dependable ground reference between connected equipment. Use the family datasheet's typical application diagram to reproduce the charge-pump network and verify that the device's electrical thresholds meet the legacy peripheral's receiver requirements.
推荐
推荐产品汇总
工程参考数据: MAX232ACWE+ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX232EWE | MAX232CWE | SP3232EBCN-L | SP3232EB |
|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | MaxLinear | MaxLinear |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Transceiver Configuration | 2/2 full RS-232 | 2/2 full RS-232 | 2/2 full RS-232 | 2/2 RS-232 | 2/2 RS-232 |
| Pin Compatibility | MAX232ACWE+ reference footprint | Same-family 16-SOIC footprint | Same-family 16-SOIC footprint | Pin compatible | Pin compatible |
关键差异点
- Exact MAX232ACWE+ family positioning (对比 SP3232EBCN-L)
- Dual full-RS-232 channels in one package (对比 SP3232EB)
- Same-package Maxim Integrated alternatives (对比 MAX232EWE)
设计说明
Place the manufacturer-recommended charge-pump capacitors directly across their designated MAX232ACWE+ pins, with minimal trace length and no test pads or routing branches in the loops. Connect the device ground to the main ground plane through a short path. The small-area capacitor connections reduce switching-loop area and help prevent generated supply noise from disturbing nearby digital or analog circuitry.
Do not substitute a package solely because it has 16 pins. Verify the complete SOIC-16 pin mapping, supply pins, charge-pump nodes, driver outputs, receiver inputs, and shutdown connection before changing the PCB. In particular, confirm that the replacement's external capacitor values and logic levels match the original design rather than relying only on the transceiver channel count.
Route each RS-232 driver and its receiver return as a compact pair where practical, keep the connector and transceiver separated from switching power nodes, and provide external connector-side surge protection for exposed cables. The MAX232ACWE+ performs logic-level conversion, but its internal ESD capability must not be treated as a complete industrial surge-protection network. Validate the interface under the intended cable length and ground conditions.
合规信息
The MAX232ACWE+ is an industrial and commercial interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer or its current compliance documentation.