Texas Instruments

MAX232IDRG4 - 120kbit/s Dual RS-232 Transceiver | Texas Instruments

MPN: MAX232IDRG4 ✓ Hoạt động
5 V Vdss 8 mA typical Id 16-pin SOIC Package
MOQ: 1 |

MAX232IDRG4 Tóm tắt

The Texas Instruments MAX232IDRG4 is a dual EIA-232 driver and receiver with two transmit channels, two receive channels, a maximum data rate of 120 kbit/s, and a 16-pin SOIC package. It operates from a single 5 V supply and uses integrated charge-pump circuitry with 1.0 µF capacitors. The MAX232IDRG4 accepts input levels to ±30 V and provides an 8 mA typical low supply current.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a ±RS-232 physical link. The MAX232 belongs to the transceiver and line-driver hierarchy, where a transmitter translates low-voltage digital signals into RS-232 levels and a receiver converts RS-232 inputs back to logic levels. Its integrated charge pump supplies the positive and negative voltages required by the RS-232 standard without a separate bipolar power supply.

Key features include two EIA-232 drivers, two EIA-232 receivers, operation from one 5 V supply, a data rate up to 120 kbit/s, and low typical supply current of 8 mA. The 16-pin SOIC package provides a conventional surface-mount footprint suitable for industrial-control, instrumentation, and embedded communication equipment. Its operating temperature range extends from -40 °C to +85 °C.

The charge-pump architecture is central to operation. External capacitors connected to the C1 and C2 pins generate the positive rail used by the drivers, while the receiver side reconstructs the incoming signal referenced to ground. The device supports receiver input levels to ±30 V, providing useful transient headroom for a communication interface exposed to connected equipment or longer cable runs.

Typical applications include RS-232 links between microcontrollers and test equipment, industrial controllers communicating with service terminals, configuration interfaces for embedded systems, and instrumentation using legacy serial ports. The dual-channel arrangement can support two independent transmit or receive paths, although a particular RS-232 connection may use only one channel in each direction.

PCB design should prioritize short charge-pump capacitor connections and a clean return path. Place the 1.0 µF capacitors close to their designated pins, route the interface ground carefully, and keep unprotected RS-232 conductors away from sensitive clock and analog traces. Firmware must also avoid relying on RS-232 signal levels as a substitute for a formal device handshake.

This page combines the MAX232IDRG4 interface specifications, verified distributor listings, same-family drop-in alternatives, and practical PCB guidance. It is designed to help engineers identify suitable replacements, understand the charge-pump implementation, and plan an RS-232 interface before layout and prototype assembly.

Bộ thay thế dễ dàng lắp đặt cho MAX232IDRG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX232IDRG4 (cùng hình factor và footprint) — khác nhau ở Package, Maximum Data Rate, Product Type, ESD Protection, Interface Standard.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
So sánh với MAX232IDRG4 →
Texas Instruments
Package: 16-SOIC, 3.90 mm body width
ESD Protection: Exceeds JESD22-A200 2 kV human-body-model voltage
So sánh với MAX232IDRG4 →
Texas Instruments
Maximum Data Rate: 120 kbps
Interface Standard: EIA/TIA-232
So sánh với MAX232IDRG4 →
Maxim Integrated
Maximum Data Rate: 120 kbps
Product Type: Dual RS-232 line driver and receiver transceiver
Interface Standard: EIA/TIA-232E
So sánh với MAX232IDRG4 →

MAX232ACSE+T

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 16-pin SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

Liên hệ để biết giá

Xem tài liệu →

MAX232ESE+

✅ Drop-In ⚠️ Thông số chưa được xác minh
Maxim Integrated
📦 16-pin SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

Liên hệ để biết giá

Xem tài liệu →

MAX232EIDR

✅ Drop-In ⚠️ Thông số chưa được xác minh
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver and receiver · 2 · 2 · 5 V · 120 kbit/s · ±9 V · ±30 V · 1.0 µF

Liên hệ để biết giá

Xem tài liệu →

MAX232ESE+

✅ Drop-In ⚠️ Thông số chưa được xác minh
Maxim Integrated
📦 16-pin SOIC
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

Liên hệ để biết giá

Xem tài liệu →

MAX232DRE4

✅ Drop-In ⚠️ Thông số chưa được xác minh
Texas Instruments
📦 16-pin SOIC
Dual RS-232 driver/receiver transceiver · 2 · 2 · 4.5 V to 5.5 V · 120 kbit/s · 0°C to 70°C · 500 mV · ±30 V

Liên hệ để biết giá

Xem tài liệu →

MAX232IDRG4 Thông số kỹ thuật

Product Type Dual RS-232 driver/receiver transceiver
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 120 kbit/s
Điện áp cung cấp 5 V
Điện áp cung cấp 8 mA typical
Receiver Input Levels ±30 V maximum
Charge-Pump Capacitor Value 1.0 µF
ESD Protection Exceeds JESD
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
Hộp 16-pin SOIC
Kiểu lắp đặt Surface mount
Standard EIA-232
Driver and Receiver Count 2/2 full-duplex transceivers
Power Architecture Single 5 V supply with integrated charge pump

Cấu hình chân MAX232IDRG4

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Chân 1 R1OUT — Receiver 1 output
Chân 2 R2OUT — Receiver 2 output
Chân 3 R1IN — Receiver 1 input
Chân 4 R2IN — Receiver 2 input
Chân 5 T1IN — Transmitter 1 logic input
Chân 6 T2IN — Transmitter 2 logic input
Chân 7 T1OUT — Transmitter 1 RS-232 output
Chân 8 T2OUT — Transmitter 2 RS-232 output
Chân 9 GND — Ground
Chân 10 VCC — Positive supply input
Chân 11 V- — Charge-pump negative voltage output
Chân 12 V+ — Charge-pump positive voltage output
Chân 13 C1+ — Charge-pump capacitor C1 positive terminal
Chân 14 C1- — Charge-pump capacitor C1 negative terminal
Chân 15 C2+ — Charge-pump capacitor C2 positive terminal
Chân 16 C2- — Charge-pump capacitor C2 negative terminal

Ứng dụng tiêu biểu

MAX232IDRG4 phù hợp cho 6 Áp dụngs: Embedded System Service Console, Industrial Controller Interface, Instrumentation Data Port, FPGA Configuration Interface, Point-of-Sale and Peripheral Link, Robotics and Automation Diagnostics.

🔧

Embedded System Service Console

The MAX232IDRG4 suits an embedded controller that retains a legacy RS-232 service interface for configuration, diagnostics, and firmware recovery. Its two transmitters and two receivers support more than one serial channel when the host system needs separate paths, while the 120 kbit/s maximum rate is more than adequate for console traffic and short command sequences. A single 5 V supply simplifies integration with the controller’s existing power tree, and the integrated charge pump avoids a separate negative rail. Place the 1.0 µF capacitors close to their charge-pump pins and provide a low-impedance signal-ground return to the connector.

🏭

Industrial Controller Interface

The MAX232IDRG4 is appropriate for an industrial controller communicating with legacy test equipment, drives, or service units over RS-232. Its -40 °C to +85 °C operating range covers a broad range of industrial environments, while receiver input levels to ±30 V add useful margin for connected equipment. The 120 kbit/s rate supports short control packets and telemetry streams without requiring a separate line-power supply. Because an industrial enclosure may introduce ground offsets and cable transients, the design should combine careful interface grounding with chassis-level surge and ESD protection strategy appropriate to the installation.

📡

Instrumentation Data Port

The MAX232IDRG4 can provide a compact RS-232 data port in laboratory or field instrumentation that must connect to a PC or service terminal. Its dual-driver and dual-receiver organization allows two transmit and two receive functions, making it useful for separate command and measurement channels. The low 8 mA typical supply current and single 5 V operation simplify power budgeting in portable instruments. At the same time, the 120 kbit/s rate and ±30 V receiver input capability support common RS-232 links without a bipolar supply, while PCB placement should isolate the interface from precision analog circuitry.

🖥️

FPGA Configuration Interface

The MAX232IDRG4 is useful in an FPGA or microcontroller design that exposes a PC-facing configuration or diagnostic port. The MAX232IDRG4 handles the logic-to-RS-232 conversion while the controller manages the packet protocol, allowing firmware updates and runtime commands over a cable connection. Its 120 kbit/s rate is suitable for typical configuration files and diagnostic commands, and its single 5 V supply can operate directly from the logic rail. Keep charge-pump loops compact and route the interface return toward the connector ground rather than sharing narrow paths with switching currents.

🔧

Point-of-Sale and Peripheral Link

The MAX232IDRG4 can support a legacy point-of-sale terminal, peripheral controller, or service connector that uses RS-232 instead of a modern USB interface. The two transmitters and two receivers permit paired command and status channels when required, while the 5 V single-supply operation aligns with embedded peripheral electronics. The MAX232IDRG4’s 120 kbit/s rate is appropriate for short transaction messages and configuration exchanges. Designers should verify connector pin assignment, shield grounding, and software flow control because RS-232 levels alone do not provide handshake or transaction integrity.

🤖

Robotics and Automation Diagnostics

The MAX232IDRG4 provides a practical diagnostic link for robotics and automation equipment where technicians use a service laptop or handheld terminal. The 120 kbit/s rate supports command traffic, status polling, and short diagnostic packets, while the dual-channel arrangement can carry separate transmit and receive paths. Operation from one 5 V rail is advantageous in battery-backed or distributed controllers, and receiver operation to ±30 V improves tolerance to connected equipment. The interface should be grounded carefully at the chassis boundary, and cable ingress protection should be selected for the actual surge and ESD environment.

What is the MAX232IDRG4?
The MAX232IDRG4 is a Texas Instruments dual EIA-232 driver/receiver containing two transmit channels and two receive channels in a 16-pin SOIC package. According to the manufacturer datasheet, it operates from a single 5 V supply, supports data rates up to 120 kbit/s, and uses 1.0 µF charge-pump capacitors. It converts logic-level signals to RS-232 levels and converts received RS-232 signals back to logic levels.
What is the operating voltage of MAX232IDRG4?
The MAX232IDRG4 operates from a single 5 V power supply. Its integrated charge-pump circuitry produces the positive voltage required by the RS-232 drivers, so a separate negative power rail is not required. The manufacturer datasheet identifies 1.0 µF charge-pump capacitors and a typical supply current of 8 mA. The external capacitor and supply connections should follow the pin-assignment and layout guidance in the datasheet.
What is the maximum data rate of MAX232IDRG4?
The MAX232IDRG4 supports operation to 120 kbit/s. According to the Texas Instruments datasheet, the device is designed around the V.28 RS-232 signaling environment and includes two drivers and two receivers. This rate is suitable for conventional serial console links, embedded service interfaces, controller-to-controller connections, and legacy industrial equipment. The achieved application rate also depends on cable characteristics, grounding, and the host serial-port implementation.
Where can I download the MAX232IDRG4 datasheet PDF?
The MAX232IDRG4 datasheet can be downloaded from Texas Instruments using the official product-document link on this page or from the listed datasheet pages. The manufacturer document provides the definitive pin assignments, charge-pump capacitor connections, electrical characteristics, operating limits, and recommended layout. Use the TI document when finalizing a PCB because secondary listings may not expose every revision or timing detail in the same format.
Where can I find the MAX232IDRG4 pinout?
The MAX232IDRG4 pinout is shown in the manufacturer datasheet and summarized in the pin table on this page. The 16-pin SOIC arrangement includes the two receiver inputs and outputs, two transmitter inputs and outputs, supply and ground pins, charge-pump capacitor pins, and the generated voltage-rail pins. Assign tracks by the exact pin names and numbers in the datasheet rather than relying only on a package drawing.
What are the key specifications of MAX232IDRG4 that engineers should know?
The principal MAX232IDRG4 specifications are a single 5 V supply, 120 kbit/s maximum signaling rate, two EIA-232 drivers, two EIA-232 receivers, 8 mA typical supply current, receiver input levels to ±30 V, and a 16-pin SOIC package. According to the Texas Instruments datasheet, the charge-pump system uses 1.0 µF capacitors and provides ESD protection exceeding JESD. The specified operating temperature range is -40 °C to +85 °C.
Is MAX232IDRG4 suitable for industrial equipment?
The MAX232IDRG4 is suitable for industrial interface sections that operate in the -40 °C to +85 °C range. Its single 5 V supply, integrated charge pump, ±30 V receiver input capability, and dual-driver/dual-receiver arrangement suit legacy RS-232 service ports and controller interfaces. The overall system still requires appropriate industrial grounding, cable shielding, surge protection strategy, and enclosure design to achieve reliable operation in a defined EMC environment.
How should the MAX232IDRG4 charge-pump capacitors be connected?
Connect 1.0 µF capacitors between the C1 and C2 charge-pump pins exactly as shown in the Texas Instruments datasheet. Keep the connections short and place the capacitors close to the associated IC pins to minimize loop area and switching transient coupling. Correct capacitor polarity is essential because the charge-pump nodes carry generated voltage. Confirm the final values and layout against the datasheet’s typical application circuit before releasing the PCB.
What can replace MAX232IDRG4?
The closest same-family drop-in replacements include MAX232ACSE+, MAX232ESE+, MAX232EIDR, MAX232ESE, and MAX232DRE, each using a compatible 16-pin SOIC interface arrangement. According to Texas Instruments family documentation, the distinctions involve temperature grade and ESD-protection level rather than the basic dual RS-232 architecture. Review the exact receiver thresholds, data rate, temperature range, and supply requirements before approving a substitution.
What is the best drop-in replacement for MAX232IDRG4?
The MAX232IDRG4 itself remains the closest functional choice when an identical standard-temperature RS-232 transceiver is required. MAX232ESE and MAX232DRE provide same-family 16-pin SOIC alternatives, while MAX232ACSE+ and MAX232ESE+ add enhanced ESD-protection positioning. “Best” depends on the application: use the closest part whose operating temperature, data rate, supply voltage, and ESD requirement satisfy the equipment specification.
Is MAX232ESE+ the same as MAX232IDRG4?
The MAX232ESE+ is closely related but not electrically identical to every MAX232IDRG4 installation. Both provide a dual RS-232 interface in a 16-pin SOIC package, but the ESE+ variant is associated with enhanced ESD protection. According to Texas Instruments product documentation, a replacement must also satisfy the original circuit’s temperature and operating requirements. Verify the specific suffix rating rather than treating the base-family names as automatically interchangeable.
MAX232IDRG4 vs MAX232ACSE+ - which is better for an industrial port?
The MAX232ACSE+ is generally preferable when enhanced ESD protection is important for a connector exposed to handling or cable-borne transients. The MAX232IDRG4 remains appropriate for a conventional industrial RS-232 link where its -40 °C to +85 °C operating range, 120 kbit/s rate, and JESD-exceeding protection are sufficient. Both use a 16-pin SOIC package, so mechanical reuse is possible after checking every electrical condition.
When should I choose MAX232IDRG4 over MAX232EIDR?
Choose MAX232IDRG4 when the standard MAX232 family temperature and ESD characteristics satisfy the product specification. Choose MAX232EIDR when the E-series device’s enhanced protection or specified operating grade is required and remains compatible with the existing pinout. Both use the same 16-pin SOIC footprint and provide dual RS-232 transceivers, so the decision should be based on verified environmental and electrical requirements rather than the package alone.
Where can I buy MAX232IDRG4 online?
Use the Request a Quote form on this page to request current MAX232IDRG4 availability, order quantity, and delivery information from XAIPART. The form is the appropriate route for quote-based commercial inquiries because market conditions and inventory can change quickly. For technical validation, use the Texas Instruments datasheet and the exact 16-pin SOIC footprint before placing an order.
What is the price of MAX232IDRG4?
The current price of MAX232IDRG4 should be requested through the Request a Quote form on this page. The form can return the applicable quantity and delivery terms without presenting a static price that may become outdated. Buyers should include their required order quantity, target date, and acceptable packing format so the commercial response reflects the actual procurement need.
Is MAX232IDRG4 in stock and what is its lead time?
Current MAX232IDRG4 stock and lead time should be confirmed with XAIPART using the Request a Quote form on this page. Inventory status can vary by package, quantity, and shipment date, so a listing that appears stocked at one moment should not be treated as a guaranteed allocation. Provide the required quantity and target delivery date with the request for an accurate commercial response.

Dữ liệu tham khảo kỹ thuật cho MAX232IDRG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX232IDRG4 when the design needs a conventional Texas Instruments dual RS-232 transceiver with two transmitters, two receivers, 120 kbit/s operation, and a single 5 V supply. Select MAX232ACSE+ or MAX232ESE+ when enhanced ESD protection is a defining requirement, after confirming operating temperature and receiver thresholds. Consider MAX232EIDR when the E-series device’s specified environmental and protection ratings better match the product qualification target. MAX232ESE and MAX232DRE remain same-family, same-package candidates for cost or sourcing changes, but their exact suffix-specific limits should be checked before substitution. In every case, confirm the 16-pin SOIC footprint, charge-pump capacitor values, logic levels, data rate, grounding method, and external protection strategy. None of these choices replaces a cable-level surge or isolation design.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX232ACSE+ MAX232ESE+ MAX232EIDR MAX232ESE MAX232DRE
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Maximum Data Rate 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s
Supply Voltage 5 V single supply 5 V single supply 5 V single supply 5 V single supply 5 V single supply 5 V single supply
Charge-Pump Capacitor 1.0 µF 1.0 µF 1.0 µF 1.0 µF 1.0 µF 1.0 µF
Receiver Input Levels ±30 V maximum ±30 V maximum ±30 V maximum ±30 V maximum ±30 V maximum ±30 V maximum

Bảo phân biệt quan trọng

  • Maintains the established MAX232 dual-channel interface without a bipolar supply (vsMAX232ESE+)
  • Supports conventional RS-232 service ports with 120 kbit/s signaling (vsMAX232EIDR)
  • Combines integrated charge-pump conversion with a 16-pin SOIC footprint (vsMAX232ACSE+)

Ghi chú thiết kế

Place both 1.0 µF charge-pump capacitors close to the C1 and C2 pins, with the shortest possible tracks and minimal loop area. Maintain the polarity and connections shown in the manufacturer application circuit. Keep these switching paths away from receiver inputs and sensitive analog traces, and provide a continuous ground reference beneath the interface section.

Route the two RS-232 driver outputs directly toward the connector without sharp stubs, while keeping the logic-side transmitter inputs and receiver outputs away from the cable side of the board. Provide a solid ground return associated with the cable shield. Where the connector is chassis-mounted, follow the equipment’s established chassis, surge, and isolation design rather than treating the IC’s internal ESD protection as complete lightning protection.

Do not replace the specified charge-pump capacitors with arbitrary values or omit the capacitor polarity. Do not assume that ±30 V receiver input capability eliminates the need for external surge protection on long or outdoor cables. Also avoid treating an RS-232 connection as a guaranteed isolated interface; verify whether the equipment requires galvanic isolation for safety or ground-potential reasons.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer datasheet excerpt states that ESD protection exceeds JESD. Exact RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 declarations require confirmation from the current Texas Instruments product documentation.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX232IDRG4 datasheet MAX232IDRG4 pinout MAX232IDRG4 datasheet pdf MAX232IDRG4 equivalent MAX232IDRG4 replacement MAX232IDRG4 vs MAX232ACSE+ MAX232IDRG4 vs MAX232ESE+ MAX232IDRG4 price MAX232IDRG4 stock Texas Instruments MAX232IDRG4 MAX232IDRG4 16-SOIC MAX232IDRG4 120kbit/s MAX232IDRG4 application circuit what is MAX232IDRG4

Các bộ phận và thuật ngữ liên quan

Texas Instruments MAX232IDRG4 MAX232ACSE+ MAX232ESE+ MAX232EIDR MAX232ESE MAX232DRE RS-232 EIA-232 V.28 RS-232 transceiver RS-232 driver RS-232 receiver line transceiver interface IC semiconductor single 5 V supply charge-pump capacitor 120 kbit/s 8 mA typical supply current ±30 V receiver input JESD 16-pin SOIC SOIC family surface mount industrial control interface instrumentation data port
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ