Analog Devices

MAX312CAE - Quad SPST 10Ω CMOS Switch | Analog Devices

MPN: MAX312CAE ✓ Hoạt động
+4.5V to +30V Vdss 2.5nA at +85°C Id 10Ω maximum Rds(on) 12 pins Package
MOQ: 1 |

MAX312CAE Tóm tắt

The Analog Devices MAX312CAE is a quad, single-pole single-throw CMOS analog switch with a maximum on-resistance of 10Ω, 1.5Ω maximum on-resistance matching between channels, and operation in either signal direction. The device is associated with the MAX312, MAX313, and MAX314 family and is offered in a 12-pin package. It is designed for routing analog signals where low leakage, repeatable channel resistance, and compact multiplexing are important.

A CMOS analog switch is a semiconductor device that uses controlled transistors to connect or disconnect an analog signal path. Within the broader hierarchy, an analog switch is an interface IC used for signal routing, multiplexing, demultiplexing, and test-signal selection. Unlike mechanical relays, it provides electronic switching without moving contacts and can be controlled by digital logic while preserving the selected signal's voltage range.

The MAX312 family's principal electrical features include an on-resistance of 10Ω maximum, channel-to-channel on-resistance matching of 1.5Ω maximum, and low leakage of 2.5nA at +85°C. The product page also identifies rail-to-rail signal handling, single-supply operation from +4.5V to +30V, and dual-supply operation from ±4.5V to ±20V. These ratings make the family suitable for systems that route signals across a broad common-mode range.

The MAX312/MAX313/MAX314 family is documented with a maximum ESD protection rating greater than 2000V per Method 3015.7 and crosstalk above 96dB at 20kHz. The Analog Devices product page identifies pin compatibility with the DG411, DG412, and DG413 families. On-resistance matching is particularly useful when multiple channels must present similar impedance to a precision measurement or signal-conditioning circuit.

Typical uses include multiplexed sensor acquisition, instrumentation signal routing, test-equipment channel selection, data-acquisition systems, and general analog signal isolation. The switch can be used with a single supply or split supply, allowing integration into circuits that operate from a positive-only rail as well as systems requiring bipolar signal paths. Its 10Ω maximum resistance should be included in the design budget when driving high-impedance versus low-impedance downstream networks.

For layout, route high-impedance signals directly to the relevant switch terminals and keep sensitive traces away from switching nodes and fast external clocks. Check the complete on-resistance curve for the selected signal voltage, because the published 10Ω value is a maximum rather than a constant resistance at every voltage and temperature.

This page combines the manufacturer’s electrical and capability specifications, practical signal-routing considerations, and verified same-family replacement guidance. It also distinguishes documented functions from parameters that must be confirmed in the manufacturer datasheet before production release.

Bộ thay thế dễ dàng lắp đặt cho MAX312CAE — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MAX313CAE

✅ Drop-In
📦 12-pin package
Same-family control-logic variant; on-resistance is unchanged at 10Ω maximum and channel matching is unchanged at 1.5Ω maximum

📋 Tham chiếu thay thế (không có trong danh mục)

MAX314CAE

✅ Drop-In
📦 12-pin package
Same-family control-logic variant; on-resistance is unchanged at 10Ω maximum and channel matching is unchanged at 1.5Ω maximum

📋 Tham chiếu thay thế (không có trong danh mục)

MAX312CAE Tỷ lệ tối đa & tính chất điện

Switch Type Quad SPST analog switch
Number of Channels 4 channels
On-Resistance 10Ω maximum
On-Resistance Matching Between Channels 1.5Ω maximum
Leakage Current 2.5nA at +85°C
Single-Supply Voltage Range +4.5V to +30V
Dual-Supply Voltage Range ±4.5V to ±20V
Signal Handling Rail-to-rail
ESD Protection Greater than 2000V per Method 3015.7
Crosstalk Greater than 96dB at 20kHz
Signal Conduction Direction Bidirectional
Technology CMOS
Pin Compatibility Compatible with DG411, DG412, and DG413
Package Pin Count 12 pins
Production Status Production

Hướng dẫn cấu hình chân MAX312CAE 12 pins

Cấu hình chân cho MAX312CAE (12 pins gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 12 pins cho MAX312CAE

Không có dữ liệu chân cụ thể sẵn có cho MAX312CAE.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX312CAE phù hợp cho 6 Áp dụngs: Multiplexed Sensor Acquisition, Precision Instrumentation Signal Routing, Data-Acquisition Channel Selection, Test and Measurement Signal Selection, Battery-Powered Analog Interface, Analog Signal Isolation.

🧩

Multiplexed Sensor Acquisition

The MAX312CAE can route several analog sensor outputs into a shared measurement chain through its four SPST channels. Its 10Ω maximum on-resistance is manageable for high-impedance sensor and instrumentation inputs, while the 1.5Ω maximum matching between channels helps reduce gain variation when channels are selected sequentially. Place the switch close to the multiplexer node and include its contribution in the sensor error budget. Leakage of 2.5nA at +85°C is particularly relevant for high-impedance sources, so the complete acquisition path should be checked for temperature-dependent bias error.

🏭

Precision Instrumentation Signal Routing

The MAX312CAE supports rail-to-rail signal handling and configurable single- or dual-supply operation, making it suitable for routing measurements between amplifier, filter, and converter stages. The maximum on-resistance of 10Ω and maximum channel-to-channel matching of 1.5Ω should be included when calculating attenuation and gain error. With high-impedance amplifier inputs, the leakage specification of 2.5nA at +85°C helps define achievable accuracy. Keep sensitive nodes away from adjacent switching paths, and use short traces to limit pickup from external clocks or fast digital control signals.

📊

Data-Acquisition Channel Selection

Four independent MAX312CAE switches can select multiple analog inputs before an ADC, allowing a compact acquisition front end without a separate relay for every source. The device operates from +4.5V to +30V for single-supply systems or ±4.5V to ±20V for bipolar systems, accommodating both ground-referenced and centered signal ranges. Account for the 10Ω maximum series resistance during sample-and-hold settling calculations, especially when driving a lower-impedance ADC input. The 1.5Ω maximum matching between channels can simplify calibration because selected channels present similar resistance.

🖥️

Test and Measurement Signal Selection

The MAX312CAE is suitable for connecting test signals, references, or stimulus sources to a shared measurement amplifier while preserving rail-to-rail signal handling. Bidirectional conduction allows the selected path to carry signals in either direction, simplifying fixture routing. The 10Ω maximum on-resistance must be included in source loading calculations, and the 1.5Ω maximum channel matching can reduce test-path variation. Use a controlled ground reference and place bypass capacitors near the supply pins. Avoid routing high-energy or high-voltage nodes adjacent to the switch terminals because the device is intended for low-voltage CMOS signal routing.

🔋

Battery-Powered Analog Interface

A single +4.5V to +30V supply configuration lets the MAX312CAE support signal routing in battery-derived systems that cannot provide a negative rail. The rail-to-rail capability allows signals to use much of the available supply range, while four SPST switches provide compact channel isolation. Designers should verify the control thresholds against the system’s supply voltage and confirm the signal amplitude remains within the absolute maximum ratings. Because the family’s leakage is specified as 2.5nA at +85°C, assess source-loading effects for high-impedance sensors throughout the intended temperature range.

⚡

Analog Signal Isolation

The MAX312CAE can disconnect unwanted loads, isolate a source during measurement, or establish a defined signal path within a larger analog system. Its bidirectional operation is useful for paths where signal direction can reverse, and the 10Ω maximum on-resistance gives designers a defined upper bound for series-loss analysis. When the switch isolates a high-impedance node, account for leakage and any capacitance formed by adjacent routes. Keep control traces away from sensitive analog nodes and verify the switch-off behavior across the complete temperature range used by the equipment.

Tóm tắt các sản phẩm được đề xuất

MAX313CAE Same-family SPST switch for alternate control-logic requirements Được sử dụng trong: Multiplexed Sensor Acquisition, Data-Acquisition Channel Selection, Battery-Powered Analog Interface MAX314CAE Same-family SPST switch for alternate control-logic requirements Được sử dụng trong: Precision Instrumentation Signal Routing, Test and Measurement Signal Selection, Analog Signal Isolation
What is the MAX312CAE?
The MAX312CAE is a quad, single-pole single-throw CMOS analog switch from Analog Devices, with a maximum on-resistance of 10Ω and maximum on-resistance matching of 1.5Ω between channels. According to the Analog Devices MAX312 Data Sheet, Rev. 2, the MAX312 family supports rail-to-rail signal handling, bidirectional conduction, single-supply operation from +4.5V to +30V, and dual-supply operation from ±4.5V to ±20V.
What are the key specifications of MAX312CAE that engineers should know?
The MAX312CAE provides four independent SPST analog switches, 10Ω maximum on-resistance, 1.5Ω maximum resistance matching, and 2.5nA leakage at +85°C. The Analog Devices MAX312 Data Sheet, Rev. 2, also identifies rail-to-rail signal handling and operation from +4.5V to +30V or ±4.5V to ±20V. These characteristics make the device suitable for signal routing, instrumentation, data acquisition, and test systems.
Where can I download the MAX312CAE datasheet PDF?
The MAX312CAE datasheet is available through the Analog Devices MAX312 product page at https://www.analog.com/en/products/max312.html. The manufacturer page provides the MAX312 Data Sheet, Rev. 2, along with product-selection and documentation resources. Use the pin-description table and electrical-characteristics tables in that document to verify package details, control logic, absolute maximum ratings, and operating limits before releasing a PCB design.
Where can I find the MAX312CAE pinout?
The MAX312CAE pinout is identified in the Analog Devices MAX312 Data Sheet, Rev. 2, available from the official MAX312 product page. The device has 12 package pins, but the package drawing and terminal names must be checked against the exact ordering code before routing a PCB. Use the manufacturer pin-description table as the controlling assignment for control inputs, common terminals, and supply pins.
What is the maximum on-resistance of the MAX312CAE?
The MAX312CAE has a maximum on-resistance of 10Ω. According to the Analog Devices MAX312 Data Sheet, Rev. 2, the MAX312, MAX313, and MAX314 family also provides maximum on-resistance matching of 1.5Ω between channels. Account for this resistance when the switched signal drives a low-impedance load or when the application requires tightly controlled channel impedance.
Can MAX312CAE handle bipolar signals?
Yes, the MAX312CAE can operate from dual supplies ranging from ±4.5V to ±20V and is specified for rail-to-rail signal handling. The Analog Devices MAX312 Data Sheet, Rev. 2, also identifies the device as a CMOS analog switch that conducts equally well in either direction. Confirm the exact control-logic levels and absolute maximum ratings for the selected supply configuration in the manufacturer datasheet.
What can replace MAX312CAE?
The documented same-family alternatives are MAX313CAE and MAX314CAE, subject to confirmation of control-logic compatibility. Both are listed with the MAX312 family by Analog Devices and use the same family-level electrical characteristics, including 10Ω maximum on-resistance and 1.5Ω maximum channel matching. Because switching thresholds and control polarity distinguish family members, verify the replacement’s logic truth table before committing to a drop-in substitution.
Is MAX313CAE a drop-in replacement for MAX312CAE?
MAX313CAE is a same-package, same-family candidate for MAX312CAE because it shares the 10Ω maximum on-resistance and 1.5Ω maximum resistance-matching characteristics. Its control-logic behavior may differ from MAX312CAE, so pin-to-pin replacement requires checking the truth table and input thresholds in the manufacturer datasheet. It should be treated as a conditional drop-in replacement rather than an automatic substitute.
Is MAX314CAE a drop-in replacement for MAX312CAE?
MAX314CAE can serve as a conditional same-package replacement for MAX312CAE because it belongs to the documented MAX312/MAX313/MAX314 switch family and shares the 10Ω maximum on-resistance and 1.5Ω maximum matching specifications. The practical distinction is control logic: verify that the input levels and on/off truth table satisfy the receiving circuit before replacing MAX312CAE.
MAX312CAE vs MAX313CAE: which switch is better for TTL control?
MAX313CAE is the more relevant candidate when the control interface specifically requires TTL-compatible switching logic, while MAX312CAE belongs to the CMOS-logic branch of the family. The Analog Devices MAX312 Data Sheet, Rev. 2, groups MAX312, MAX313, and MAX314 together and identifies their common low-resistance, low-leakage characteristics. Select the member whose input thresholds and truth table match the control circuit exactly.
When should I choose MAX312CAE instead of MAX313CAE?
Choose MAX312CAE when its control-input thresholds and truth table match CMOS control logic in the target circuit. MAX313CAE should be selected when its corresponding logic interface is required. Both devices share the family’s 10Ω maximum on-resistance and 1.5Ω maximum channel matching, so the decision should be driven primarily by control compatibility, supply arrangement, and verified package terminal assignments.
Is MAX312CAE suitable for data-acquisition and instrumentation systems?
Yes, MAX312CAE is suitable for data-acquisition and instrumentation signal routing because it offers four SPST channels, 2.5nA leakage at +85°C, and maximum on-resistance matching of 1.5Ω. According to the Analog Devices MAX312 Data Sheet, Rev. 2, the family supports rail-to-rail handling and broad single- or dual-supply ranges. Include the switch resistance and leakage in the complete error budget.
Where can I buy MAX312CAE online?
Use the Request a Quote form on this page to request MAX312CAE availability, pricing, and lead time for your required quantity. The form is the appropriate route for an exact ordering-code and package commitment. Before requesting a shipment, confirm the package, temperature rating, and operating or automotive qualification required by your equipment.
What is the lead time for MAX312CAE?
The current lead time for MAX312CAE should be requested through the Request a Quote form on this page, including the required quantity, target date, and shipment destination. The manufacturer identifies MAX312 as a production product, but production status alone does not establish a fixed lead time or allocation. Confirm the complete suffix and packaging arrangement before accepting a delivery schedule.
Is MAX312CAE in stock?
Current MAX312CAE inventory should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and acceptable delivery date so the order can be matched against available supply. The product page identifies the MAX312 family as production, but production status should not be treated as a guarantee that every package suffix and quantity is immediately available.

Dữ liệu tham khảo kỹ thuật cho MAX312CAE — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX312CAE when a four-channel SPST routing function is required and its control-input thresholds and truth table match the design's CMOS control signals. Its documented characteristics include 10Ω maximum on-resistance, 1.5Ω maximum channel matching, 2.5nA leakage at +85°C, rail-to-rail signal handling, and single- or dual-supply operation. MAX313CAE is the appropriate same-family candidate when TTL-oriented control behavior is required, while MAX314CAE should be evaluated when its corresponding control logic matches the system. Because these family members share major electrical ratings but differ in control behavior, replacement decisions must be based on the logic truth table rather than package appearance alone. For instrumentation, data acquisition, or test systems, include the 10Ω series resistance and temperature-dependent leakage in the error budget. This device is not appropriate where switch resistance is substantial relative to the load or where the routed voltage exceeds the absolute maximum limits.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX313CAE MAX314CAE
Package 12-pin package 12-pin package 12-pin package
Brand Analog Devices Analog Devices Analog Devices
Switch Configuration Quad SPST Quad SPST Quad SPST
Maximum On-Resistance 10Ω 10Ω 10Ω
On-Resistance Matching Between Channels 1.5Ω maximum 1.5Ω maximum 1.5Ω maximum
Leakage Current 2.5nA at +85°C 2.5nA at +85°C 2.5nA at +85°C
Single-Supply Operation +4.5V to +30V +4.5V to +30V +4.5V to +30V
Dual-Supply Operation ±4.5V to ±20V ±4.5V to ±20V ±4.5V to ±20V
Signal Handling Rail-to-rail Rail-to-rail Rail-to-rail
Control Logic MAX312 family control logic MAX313 family control logic MAX314 family control logic

Bảo phân biệt quan trọng

  • Maintains the same maximum on-resistance across the documented same-family choices (vsMAX313CAE)
  • Preserves channel-to-channel resistance matching (vsMAX314CAE)
  • Supports both positive-only and bipolar system architectures (vsMAX313CAE)

Ghi chú thiết kế

Treat the 10Ω maximum on-resistance as a series element in the complete signal path. For a high-impedance receiver, its effect may be negligible, but it becomes important when the selected source has a lower impedance or when the path drives an ADC sample-and-hold input. Use the manufacturer on-resistance curve for the actual signal voltage and temperature rather than assuming that 10Ω applies at every operating point.

Keep the common terminals, signal terminals, and control pins close to their intended circuit nodes, and avoid routing sensitive analog traces directly beside switching terminals. Place supply bypass capacitance near the device supply pins and return it to the local ground reference. If control signals originate near a fast digital processor, use controlled impedance routing and consider a ground guard where the board area permits it.

Do not select a same-family replacement solely from its package and on-resistance rating. MAX313CAE and MAX314CAE match the MAX312CAE family's key resistance and leakage specifications, but control-input thresholds and truth-table behavior determine whether they are electrically interchangeable. Verify the control logic, supply arrangement, absolute maximum ratings, and package drawing before approving a substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The MAX312 family is a production analog interface IC, but specific environmental and material-compliance declarations for MAX312CAE are not stated on the cited product page. AEC-Q100 status is marked not applicable because no automotive qualification is identified.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX312CAE datasheet MAX312CAE pinout MAX312CAE datasheet pdf Analog Devices MAX312CAE MAX312CAE equivalent MAX312CAE replacement MAX312CAE vs MAX313CAE MAX312CAE 10 ohm SPST switch MAX312CAE 12 pin package MAX312CAE price MAX312CAE stock MAX312CAE application circuit MAX312CAE rail to rail switch

Các bộ phận và thuật ngữ liên quan

Analog Devices Maxim Integrated MAX312CAE MAX313CAE MAX314CAE MAX312 CMOS analog switch SPST switch analog switch multiplexer demultiplexer interface IC semiconductor on-resistance on-resistance matching leakage current rail-to-rail signal handling bidirectional conduction single-supply operation dual-supply operation 12-pin package data acquisition instrumentation test and measurement DG411 DG412 DG413
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ