MAX3243CUI+G1Z - 3/5 RS-232 Transceiver | Analog Devices
MPN: MAX3243CUI+G1Z ✓ Hoạt độngMAX3243CUI+G1Z Tóm tắt
A multi-driver RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible outputs. Within the signal-chain hierarchy, the MAX3243CUI+G1Z is an RS-232 transceiver, a serial-interface component, an interface IC, and ultimately a semiconductor. It is intended for systems that need multiple driver channels and more receiver channels than a conventional two-driver, two-receiver transceiver provides.
The principal feature is its combination of three drivers and five receivers in one package. AutoShutdown reduces supply current to 1 uA when the receiver inputs do not detect a valid signal level, helping conserve power in systems that remain connected intermittently. Operation from +3 V to +5.5 V supports both 3.3 V and 5 V logic environments. The complementary always-active receiver provides a monitoring path for designs that require an output to remain observable when the principal receiver channels are inactive.
The MAX3243CUI+G1Z belongs to the MAX3221, MAX3223, and MAX3243 family of low-power RS-232 transceivers. Maxim describes a 1 uA supply-current implementation using AutoShutdown technology. This device is the 3-driver, 5-receiver member and is distinct from lower-channel-count family members by providing five receiver outputs, including the always-active monitoring receiver. The 28-pin TSSOP format supports conventional surface-mount assembly while accommodating the additional receiver and driver connections.
Typical applications include industrial serial-port equipment, barcode scanners, point-of-sale terminals, embedded control systems, instrumentation, and systems that connect a controller to multiple RS-232 peripherals. The three driver outputs can support several unidirectional RS-232 links, while five receiver inputs accommodate multiple incoming data or control signals. The 1 uA low-power state is particularly useful where the interface must remain attached to a host without continuously consuming full operating power.
Design the circuit with the electrical requirements of RS-232 in mind. Driver outputs require the appropriate external charge-pump and protection network specified by the manufacturer, and receiver inputs should receive protection appropriate to the exposed cable environment. Confirm the complete 28-pin assignment, logic levels, and capacitor values in the manufacturer datasheet before layout release.
This product page combines package, channel-count, supply-range, and low-power details with practical selection guidance. It also identifies same-family alternatives and explains where an exact drop-in interchange requires confirmation of temperature grade, suffix code, and exposed loading conditions.
Bộ thay thế dễ dàng lắp đặt cho MAX3243CUI+G1Z — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243CUI+G1Z (cùng hình factor và footprint) — khác nhau ở Supply Voltage Range, Product Type, Number of Drivers, Number of Receivers, Shutdown Supply Current.
MAX3243CUI+TG1Z
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243CUI+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243CUI+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EEUI+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EUI+
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MAX3243CUI+G1Z Thông số kỹ thuật
| Product Type | RS-232 transceiver interface IC |
| Driver Count | 3 drivers |
| Receiver Count | 5 receivers |
| Supply Voltage Range | +3 V to +5.5 V |
| Điện áp cung cấp | 1 uA |
| Low-Power Feature | AutoShutdown |
| Receiver Architecture | One complementary always-active receiver |
| Interface Standard | RS-232 |
| Hộp | 28-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Logic Compatibility | 3.3 V and 5 V systems |
Hướng dẫn cấu hình chân MAX3243CUI+G1Z 28-pin tssop
Cấu hình chân cho MAX3243CUI+G1Z (28-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243CUI+G1Z.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243CUI+G1Z phù hợp cho 6 Áp dụngs: Industrial Serial-Port Control, Point-of-Sale Terminal, Barcode Scanner Interface, Embedded Instrumentation, Telecommunications Control Interface, Data Acquisition and Test Equipment.
Industrial Serial-Port Control
The MAX3243CUI+G1Z fits industrial serial-port control because it combines three RS-232 drivers with five receiver inputs in one 28-pin TSSOP package. The three driver outputs can communicate with multiple peripheral ports, while the five receivers can monitor command, status, and data lines. Its +3 V to +5.5 V supply range supports both 3.3 V and 5 V controller platforms. AutoShutdown reduces supply current to 1 uA when no valid receiver signal is detected, making the interface suitable for equipment that spends substantial time idle. Design the board with the datasheet charge-pump network and external protection required for cable-connected RS-232 ports.
Được đề xuất
Point-of-Sale Terminal
The MAX3243CUI+G1Z is useful in point-of-sale terminals that support several RS-232 peripherals, such as printers, scanners, scales, or customer displays. Three driver channels provide outbound control paths, and five receiver channels provide greater input capacity than a conventional 2/2 transceiver. Operation down to +3 V supports compact embedded systems, while the 1 uA AutoShutdown state can reduce standby consumption when the peripherals are inactive. The 28-pin TSSOP package also keeps the interface compact. Preserve the datasheet-defined charge-pump capacitors and include appropriate surge and ESD protection at externally accessible connectors.
Được đề xuất
Barcode Scanner Interface
The MAX3243CUI+G1Z can interface a controller with barcode scanners and related serial accessories using a compact set of RS-232 lines. Three transmitters can support scanner command, handshake, and auxiliary signaling paths, while five receivers can accept data, status, and control inputs. The 1 uA low-power mode is advantageous in scanners or terminal equipment that wakes intermittently. Because a 28-pin TSSOP requires a modest board footprint, the device is practical for compact handheld and fixed-reader designs. Verify the exact +G1Z operating-temperature grade and validate the electrical levels, capacitor network, and cable protection against the manufacturer datasheet.
Được đề xuất
Embedded Instrumentation
The MAX3243CUI+G1Z suits embedded instrumentation that exchanges commands and measurements with RS-232 test equipment. Five receivers allow several status or measurement signals to be monitored simultaneously, while three drivers support outbound requests or configuration commands. The +3 V to +5.5 V operating range permits integration with low-voltage embedded controllers, and AutoShutdown helps minimize consumption during idle measurement intervals. Use the always-active receiver when a system requires continuous monitoring independent of the normal receiver activity. The main engineering trade-off is that each exposed RS-232 port still requires suitable protection and correct charge-pump implementation according to the datasheet.
Được đề xuất
Telecommunications Control Interface
The MAX3243CUI+G1Z can provide a multi-channel RS-232 control interface between a network appliance or telecommunications controller and peripheral equipment. Three driver outputs support outbound configuration or reset commands, and five receiver inputs can supervise status lines from several modules. Its low 1 uA AutoShutdown supply current is useful in equipment with intermittent operating states, while +3 V operation supports compact control logic. The always-active receiver offers a complementary monitoring path for chassis, alarm, or link-status signals. Before deployment, confirm the device's exact temperature grade, ESD rating, and transient tolerance, and place connector protection close to the external pins.
Được đề xuất
Data Acquisition and Test Equipment
The MAX3243CUI+G1Z is appropriate for data-acquisition and test equipment that needs several RS-232 command and status channels without allocating separate transceiver packages. The 3/5 channel arrangement accommodates multiple outbound control signals and more inbound monitoring signals, while the 28-pin TSSOP provides a compact surface-mount solution. AutoShutdown limits supply current to 1 uA when no valid input is detected, supporting repeatable test cycles in which the interface is active only during measurements. The always-active receiver can support continuous supervision of equipment state. Apply the manufacturer datasheet's external capacitor and protection guidance, and verify that the selected grade covers the full operating environment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243CUI+G1Z — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243CUI+TG1Z | MAX3243CUI | MAX3243CUI+T | MAX3243EEUI+T | MAX3243EUI+ |
|---|---|---|---|---|---|---|
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Driver Count | 3 drivers | 3 drivers | 3 drivers | 3 drivers | 3 drivers | 3 drivers |
| Receiver Count | 5 receivers | 5 receivers | 5 receivers | 5 receivers | 5 receivers | 5 receivers |
| Interface Standard | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
Bảo phân biệt quan trọng
- Five receiver inputs support denser RS-232 monitoring than a 2/2 transceiver (vsMAX3232CPW)
- Low-power AutoShutdown reduces standby supply demand (vsMAX3243CUI)
- Always-active complementary receiver supports independent monitoring (vsADM3311EARUZ)
Ghi chú thiết kế
Place the charge-pump capacitors and their ground returns directly beside the associated IC pins, with short, low-inductance traces. Follow the manufacturer layout and capacitor-value instructions for the MAX3243CUI family. Keep the RS-232 driver and receiver routes away from clocks, switching nodes, and sensitive analog inputs, and maintain the intended isolation between logic-side and cable-side nets.
Do not assume that every MAX3243 order code is automatically interchangeable. Before substituting MAX3243CUI+TG1Z, MAX3243CUI, MAX3243CUI+T, MAX3243EEUI+T, or MAX3243EUI+, compare the complete pin description, supply limits, temperature range, data-rate rating, and lifecycle status. Also confirm that the selected part retains the 3-driver, 5-receiver arrangement and the complementary always-active receiver required by the system.
Treat every connector-facing RS-232 line as an electrically harsh external interface. Add protection close to the connector or transceiver pins, route the protected lines to the IC as short as practical, and provide a controlled chassis or signal-ground strategy. Validate the completed board against the application's ESD, surge, cable-length, and ground-offset requirements rather than relying only on logic-level simulation.
Thông tin tuân thủ
Compliance attributes are not stated in the available product records. Request the current manufacturer declaration for the exact MAX3243CUI+G1Z ordering code before making a compliance claim.