MAX3243ECUI+ 3V 5.5V 250kbps RS-232 Transceiver | ADI
MPN: MAX3243ECUI+ ✓ Hoạt độngMAX3243ECUI+ Tóm tắt
An RS-232 transceiver is a line-driver and line-receiver interface IC that converts low-voltage digital logic signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. In the interface hierarchy, the MAX3243ECUI+ belongs to the communication-interface IC family, combining RS-232 drivers and receivers with low-voltage digital support and protected external connections.
Key electrical features include operation from 3.0 V to 5.5 V, a maximum data rate of 250 kbps, and ±15 kV ESD protection on the serial interfaces. Automatic shutdown reduces supply consumption when the associated RS-232 links are inactive, while the complementary always-active receiver supports continuous monitoring. The 28-pin TSSOP package provides a compact surface-mount footprint for industrial control, communications, instrumentation, and embedded equipment.
The three drivers accommodate outbound serial connections, while five receivers provide additional inbound monitoring channels. This asymmetric 3/5 arrangement is useful in systems where several remote devices report status to one controller while the controller drives a smaller number of commands. The 250 kbps maximum data rate supports moderate-speed point-to-point serial links and legacy peripheral communication.
Typical uses include industrial controllers, data-acquisition equipment, POS terminals, test systems, and service interfaces. In an industrial controller, the device can connect a local processor to multiple RS-232 sensors or service ports while its ESD-protected lines improve resilience to electrostatic discharge encountered during installation and maintenance.
PCB design should place the device close to its RS-232 connector and route driver and receiver traces away from clocks, switching regulators, and high-speed digital signals. Confirm that connector-side protection and grounding provide the intended surge and ESD path, and follow the manufacturer datasheet for recommended charge-pump capacitors and layout.
This page combines the manufacturer specifications, package details, engineering applications, drop-in alternatives, comparison parameters, and practical design guidance to help engineers evaluate the MAX3243ECUI+ for new and existing RS-232 designs.
Bộ thay thế dễ dàng lắp đặt cho MAX3243ECUI+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243ECUI+ (cùng hình factor và footprint) — khác nhau ở Maximum Data Rate, Supply Voltage Range, ESD Protection, Interface Standard, Product Type.
MAX3243EEUI+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243ECAI+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243CUI+
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MAX3243ECPWR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ICL3243ECVZA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3243ECUI+ Thông số kỹ thuật
| Product Type | Multichannel RS-232 transceiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Transmitter Channels | 3 channels |
| Receiver Channels | 5 channels |
| Complementary Always-Active Receiver | 1 receiver |
| Transmitter Output Current | Up to 1 A |
| ESD Protection | ±15 kV |
| Shutdown Supply Current | 1 µA |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| Communication Standard | EIA/TIA-232 |
| Interface Standard | V.28 and V.24 |
| Hộp | 28-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân MAX3243ECUI+ 28-pin tssop
Cấu hình chân cho MAX3243ECUI+ (28-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243ECUI+.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243ECUI+ phù hợp cho 6 Áp dụngs: Industrial Controller Communication, Data-Acquisition Equipment, Point-of-Sale Terminal, Test and Measurement Instrument, Maintenance and Service Console, Portable Diagnostic Equipment.
Industrial Controller Communication
The MAX3243ECUI+ fits industrial controllers that need several RS-232 service or command links while accepting status reports from more peripherals than they drive. Its three transmitters and five receivers provide asymmetric connectivity, while the 250 kbps rate suits moderate-speed protocols. The 3.0-to-5.5 V supply range allows use beside either 3 V or 5 V logic. Automatic shutdown lowers consumption during idle periods, while ±15 kV ESD protection strengthens the external interface against electrostatic discharge. Place the transceiver near the connector and maintain clean return paths to reduce noise pickup.
Được đề xuất
Data-Acquisition Equipment
Data-acquisition systems often combine command outputs with a greater number of sensor or instrument response inputs, matching the MAX3243ECUI+ configuration of three drivers and five receivers. Its 250 kbps maximum rate is suitable for many legacy RS-232 instruments and low-to-moderate-speed acquisition modules. Operation from 3.0 V to 5.5 V simplifies interface design across portable and bench-top equipment. The automatic shutdown function reduces standby demand, and the protected external pins improve reliability around user-accessible connectors where electrostatic discharge is likely.
Được đề xuất
Point-of-Sale Terminal
A point-of-sale terminal can use the MAX3243ECUI+ to consolidate printer, customer-display, payment-accessory, and service connections that use RS-232. Three driver outputs support outbound commands or control signals, while five receiver inputs support incoming peripheral status. The 250 kbps rate is appropriate for many POS transactions that do not require continuous high-bandwidth transfer. A 3.0-to-5.5 V operating range accommodates compact embedded systems, and automatic shutdown helps control power use when peripherals are idle. Connector-side grounding and external surge protection should complement the IC's ±15 kV ESD rating.
Được đề xuất
Test and Measurement Instrument
The MAX3243ECUI+ is useful in test and measurement equipment that needs several RS-232 control and monitoring ports in a compact board area. The five receiver channels can monitor multiple instrument or fixture status lines, while three transmitters provide command outputs. Its 250 kbps data rate supports typical legacy serial-control protocols, and the 3.0-to-5.5 V supply range simplifies interface selection across portable and laboratory products. Automatic shutdown is beneficial in battery-powered instruments. For laboratory environments, keep external cabling away from sensitive traces and follow the manufacturer layout guidance for charge-pump components.
Được đề xuất
Maintenance and Service Console
The MAX3243ECUI+ can support service-oriented equipment with one controller connection and several monitored remote modules. Its three transmitters handle commands from the main controller, while five receivers accept module reports, fault flags, or acknowledgments. The ±15 kV ESD rating is especially relevant for service ports that may be connected and disconnected by operators. Automatic shutdown reduces consumption when no remote link is active, and the 250 kbps rate is adequate for many configuration and diagnostic protocols. The interface still requires an appropriate connector shield, ground reference, and external protection strategy for the installation environment.
Được đề xuất
Portable Diagnostic Equipment
Portable diagnostic equipment benefits from the MAX3243ECUI+ because it supports 3.0-to-5.5 V operation and automatically reduces consumption when communication is inactive. The three transmitters can address attached systems, while the five receivers can collect status from several probes or adapters. At a maximum 250 kbps, the device suits status, configuration, and moderate-volume data transfers rather than continuous high-speed file transfer. The compact 28-pin TSSOP package conserves board area, and the protected RS-232 pins add resilience when the product is used with external equipment. Power budgeting should include the active and shutdown consumption of the final system configuration.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243ECUI+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243EEUI+T | MAX3243ECAI+T | MAX3243CUI+ | MAX3243ECPWR | ICL3243ECVZA |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
Bảo phân biệt quan trọng
- More receiver channels than typical dual-driver dual-receiver transceivers (vsMAX232EIDR)
- Three transmitters support multi-command equipment (vsMAX3232ECDR)
- 250 kbps rate supports moderate-speed RS-232 links (vsMAX3243ECPWR)
Ghi chú thiết kế
Place the MAX3243ECUI+ close to the RS-232 connector so protected transceiver pins connect to the connector through short, direct routes. Keep the charge-pump capacitors and the IC close together, and route charge-pump nets away from receiver inputs and sensitive analog traces. Follow the Analog Devices MAX3243 datasheet for the exact capacitor values, pin placement, and ground reference. The 28-pin TSSOP land pattern must follow the manufacturer package drawing.
Do not treat the ±15 kV ESD rating as a complete external surge-protection solution. The rating describes the IC's internal electrostatic-discharge tolerance and does not specify the entire connector-to-ground path. Add suitable external protection when cables can extend beyond the enclosure or connect to unknown equipment, and verify that the selected protection does not distort RS-232 thresholds or transition behavior at 250 kbps.
Separate the MAX3243ECUI+ RS-232 routing from clocks, switching-regulator nodes, relay contacts, and high-speed digital signals. Preserve a continuous signal-ground reference between the transceiver and connector, avoid long stubs, and keep protected interface traces away from noisy power-conversion components. These practices reduce common-mode noise, ground bounce, and unintended data errors in systems with several external cables.
Thông tin tuân thủ
RoHS compliance is identified for the MAX3243 family. No specific AEC-Q100 qualification, REACH declaration, halogen-free designation, or conflict-minerals statement is established for the exact ordering code.