MAX3243EEAI+ - 3.0V RS-232 Transceiver | Analog Devices
MPN: MAX3243EEAI+ ✓ Hoạt độngMAX3243EEAI+ Tóm tắt
An RS-232 transceiver is an interface IC that converts between logic-level digital signals and differential bipolar RS-232 line levels. The MAX3243EEAI+ belongs to the RS-232 transceiver hierarchy, where it combines line drivers, line receivers, charge-pump circuitry, and logic-level control into one communication interface. Its receiver structure supports both an active-low shutdown control and an active-high enhanced-power-management input.
Key features include three transmit channels, five receive channels, 250kbps operation, operation from 3.0V to 5.5V, and 15kV ESD protection. The multiple receiver count allows one transmit line to be monitored by several destinations, while the three driver outputs support connections to three RS-232 data buses. Automatic shutdown can reduce power consumption when the connected equipment is inactive.
The MAX3243E uses charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 from a single low-voltage supply. Its enhanced driver design can provide true RS-232 performance at low supply voltages without requiring a 5V-only source. The manufacturer describes the MAX3243E family as 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown, wake-up, high data rates, and enhanced ESD protection.
Typical applications include industrial serial controllers, point-of-sale equipment, instrumentation, data-acquisition systems, and communication links between a host and peripheral devices. The three drivers and five receivers are particularly useful when one controller must interface with multiple downstream devices or when received data must be distributed to several logic inputs.
For a new design, verify the exact pin functions, shutdown polarity, charge-pump capacitor values, and external communication-line requirements against the Analog Devices MAX3243E datasheet before layout. Keep the RS-232 connector-side traces away from sensitive analog and high-speed digital paths, and place the required charge-pump capacitors close to their specified pins.
This product page combines the MAX3243EEAI+ ordering information, RS-232 interface characteristics, package details, compatible alternatives, and practical implementation guidance to support component selection and PCB design decisions.
Bộ thay thế dễ dàng lắp đặt cho MAX3243EEAI+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243EEAI+ (cùng hình factor và footprint) — khác nhau ở Package, Maximum Data Rate, Supply Voltage Range, ESD Protection, Number of Receivers.
MAX3243EEAI-T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3243EEAI+G071
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EEAI+TG071
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3241EEAI+T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3243ECPWR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EEAI+ Thông số kỹ thuật
| Product Type | RS-232 transceiver |
| Transmitter Channels | 3 channels |
| Receiver Channels | 5 channels |
| Duplex Mode | Full duplex |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | ±15kV |
| Communication Standard | RS-232 / EIA/TIA-232 |
| Related Interface Standards | V.28 / V.24 |
| Supply Shutdown Current | 1uA |
| Hộp | 28-pin SSOP |
| Kiểu lắp đặt | Surface mount |
| AutoShutdown Feature | Yes |
| Automatic Wake-Up | Yes |
| External Charge-Pump Capacitors | 4 capacitors of 0.1uF each |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân MAX3243EEAI+ 28-pin ssop
Cấu hình chân cho MAX3243EEAI+ (28-pin ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243EEAI+.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243EEAI+ phù hợp cho 6 Áp dụngs: Industrial Serial Control, Point-of-Sale Equipment, Data-Acquisition Systems, Embedded Equipment Communication, Instrumentation and Test Equipment, Communication Port Multiplier.
Industrial Serial Control
The MAX3243EEAI+ suits industrial controllers that must exchange command and status information over RS-232. Its three transmitters can drive up to three separate communication buses, while five receivers can monitor several incoming signals from one peripheral or distribute returned data. Operation from 3.0V to 5.5V allows direct use with 3.3V controllers and 5V industrial logic. The 250kbps maximum data rate supports responsive command traffic, while ±15kV ESD protection improves robustness at connector-adjacent circuitry. Designers should preserve the required charge-pump capacitor placement and keep protected cable-side routing separated from precision analog sections.
Được đề xuất
Point-of-Sale Equipment
Point-of-sale terminals and peripheral interfaces can use the MAX3243EEAI+ to connect a low-voltage controller to RS-232 devices such as printers, scanners, or customer displays. The three-driver configuration supports several attached devices, and the five-receiver configuration is useful when multiple peripheral outputs must feed the host. The 3.0V-to-5.5V supply range accommodates both 3.3V and 5V system logic without requiring a 12V RS-232 supply. At the 250kbps limit, cable length and loading must be checked against the selected standard. Automatic shutdown can also reduce consumption when the terminal's serial ports are not continuously active.
Được đề xuất
Data-Acquisition Systems
The MAX3243EEAI+ can bridge a controller or data-acquisition unit to legacy RS-232 instruments. Five receiver inputs provide flexibility when an instrument exposes status, alarm, or handshake lines in addition to the primary data channel. Three transmitter outputs can connect control commands to more than one instrument while retaining a common logic interface. The low 3.0V-to-5.5V operating range is useful in compact acquisition equipment, while automatic shutdown permits low-power operation between measurement cycles. Engineers should verify instrument logic levels, connector pin assignments, cable shielding, and the MANCHESTER/RS-232 signaling expectations of the connected equipment before deployment.
Được đề xuất
Embedded Equipment Communication
Embedded equipment can use the MAX3243EEAI+ to add a robust RS-232 port to a 3.3V or 5V controller. The three transmitters and five receivers allow one serial interface module to serve several buses or status inputs without duplicating driver and receiver packages. Its 250kbps capability is suitable for configuration commands, diagnostic data, and short industrial messages. The automatic shutdown and wake-up functions help manage power in intermittently connected equipment, while ±15kV ESD protection strengthens the external interface. Board layout should follow the recommended charge-pump capacitor connections and keep the cable-facing nets away from high-impedance analog inputs.
Được đề xuất
Instrumentation and Test Equipment
The MAX3243EEAI+ is appropriate for laboratory and field instrumentation that retains RS-232 compatibility while using modern low-voltage control electronics. Five receiver channels can accept trigger, ready, alarm, and data signals, while three transmitter channels can connect to separate test fixtures or controlled devices. The 250kbps rate is appropriate for many short-distance control protocols, and the 3.0V-to-5.5V operating range simplifies power architecture. Because instrumentation systems often contain sensitive analog sections, the cable-side nets and charge-pump outputs should be physically separated from precision signal paths. Grounding and shield-return strategies should be established for the complete instrument rather than only the transceiver.
Được đề xuất
Communication Port Multiplier
The asymmetric 3/5 channel arrangement makes the MAX3243EEAI+ useful in communication-port multipliers where a central controller sends commands to several RS-232 targets and monitors multiple status returns. Its full-duplex operation supports simultaneous transmit and receive activity, and the 250kbps data rate is suitable for short control links. Operation from 3.0V to 5.5V supports mixed-voltage logic systems, while automatic shutdown reduces power when no traffic is present. The external charge-pump network and all shutdown-control nets must follow the manufacturer application circuit, and each connected RS-232 port needs appropriate cable strain relief and protection for its environmental conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243EEAI+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243EEAI-T | MAX3243EEAI+G071 | MAX3243EEAI+TG071 | MAX3241EEAI+T | MAX3243ECPWR |
|---|---|---|---|---|---|---|
| Package | SSOP-28 | SSOP-28 | SSOP-28 | SSOP-28 | SSOP-28 | SSOP-28 |
| Brand | Analog Devices | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Transmitter Channels | 3 | 3 | 3 | 3 | 2 | 3 |
| Receiver Channels | 5 | 5 | 5 | 5 | 2 | 5 |
| AutoShutdown Feature | Yes | Yes | Yes | Yes | No | Yes |
| External Charge-Pump Capacitors | 4 × 0.1uF | 4 × 0.1uF | 4 × 0.1uF | 4 × 0.1uF | 4 × 0.1uF | 4 × 0.1uF |
Bảo phân biệt quan trọng
- Five receiver channels support broader status monitoring (vsMAX3241EEAI+T)
- Automatic shutdown and wake-up support low-power control (vsMAX3241EEAI+T)
- Three transmit channels simplify multi-port designs (vsMAX3241EEAI+T)
- The complete MAX3243E option set preserves family electrical ratings (vsMAX3243ECPWR)
Ghi chú thiết kế
Place the four external 0.1uF charge-pump capacitors close to the corresponding MAX3243EEAI+ pins, using short traces and a solid ground connection. Keep the charge-pump nets away from sensitive receiver inputs and analog circuitry because switching energy can couple into nearby nodes. Follow the Analog Devices MAX3243E recommended application circuit for capacitor selection and pin connections rather than substituting generic high-capacitance values without checking stability and timing.
Separate connector-side driver and receiver routes from low-level logic-side traces. RS-232 driver outputs use high-voltage bipolar levels and can couple switching transients into adjacent circuitry even when ESD protection is fitted. Route these nets away from precision analog inputs, crystal circuits, and sensitive reset networks. Use a clear ground reference and return path for each cable, and place optional protection components near the connector where transient energy first enters the board.
Do not assume that every MAX3243-family ordering suffix is electrically and logistically identical. Confirm the 28-pin SSOP package, pin assignment, shutdown polarity, charge-pump connections, and marking for MAX3243EEAI-T, MAX3243EEAI+G071, MAX3243EEAI+TG071, MAX3241EEAI+T, and MAX3243ECPWR. The MAX3241 family has a different channel allocation, so treating it as interchangeable without reviewing the datasheet can leave unused or inaccessible lines.
Design the 3.0V-to-5.5V supply path for both logic load and the charge-pump current drawn by RS-232 transmission. Decouple the supply pins locally with the capacitance specified by the manufacturer application circuit. Account for the 1uA shutdown current when calculating standby power, while separately evaluating active transmission demand because shutdown current does not represent the current consumed during continuous data activity.
Thông tin tuân thủ
RoHS compliance and a lead-free ordering option are identified for the MAX3243E family. REACH, halogen-free status, and conflict-minerals status are not stated in the cited product information.