Analog Devices

MAX3243EEAI+ - 3.0V RS-232 Transceiver | Analog Devices

MPN: MAX3243EEAI+ ✓ פעיל
3.0V to 5.5V Vdss 1uA Id V.28 / V.24 Rds(on) 28-pin SSOP Package
כמות הזמנה מינימלית: 1 |

MAX3243EEAI+ סקירה

The Analog Devices MAX3243EEAI+ is a 3/5-channel RS-232 transceiver designed for full-duplex serial communication, with three drivers, five receivers, a 3.0V to 5.5V supply range, and a 250kbps data rate. The device is housed in a 28-pin SSOP package and includes enhanced 15kV ESD protection on its RS-232 pins. It also provides automatic shutdown and wake-up functions for reducing supply current in portable or intermittently connected systems.

An RS-232 transceiver is an interface IC that converts between logic-level digital signals and differential bipolar RS-232 line levels. The MAX3243EEAI+ belongs to the RS-232 transceiver hierarchy, where it combines line drivers, line receivers, charge-pump circuitry, and logic-level control into one communication interface. Its receiver structure supports both an active-low shutdown control and an active-high enhanced-power-management input.

Key features include three transmit channels, five receive channels, 250kbps operation, operation from 3.0V to 5.5V, and 15kV ESD protection. The multiple receiver count allows one transmit line to be monitored by several destinations, while the three driver outputs support connections to three RS-232 data buses. Automatic shutdown can reduce power consumption when the connected equipment is inactive.

The MAX3243E uses charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 from a single low-voltage supply. Its enhanced driver design can provide true RS-232 performance at low supply voltages without requiring a 5V-only source. The manufacturer describes the MAX3243E family as 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with automatic shutdown, wake-up, high data rates, and enhanced ESD protection.

Typical applications include industrial serial controllers, point-of-sale equipment, instrumentation, data-acquisition systems, and communication links between a host and peripheral devices. The three drivers and five receivers are particularly useful when one controller must interface with multiple downstream devices or when received data must be distributed to several logic inputs.

For a new design, verify the exact pin functions, shutdown polarity, charge-pump capacitor values, and external communication-line requirements against the Analog Devices MAX3243E datasheet before layout. Keep the RS-232 connector-side traces away from sensitive analog and high-speed digital paths, and place the required charge-pump capacitors close to their specified pins.

This product page combines the MAX3243EEAI+ ordering information, RS-232 interface characteristics, package details, compatible alternatives, and practical implementation guidance to support component selection and PCB design decisions.

חלופות תחליף ישיר עבור MAX3243EEAI+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX3243EEAI+ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Maximum Data Rate, Supply Voltage Range, ESD Protection, Number of Receivers.

Analog Devices
ESD Protection: ±15kV HBM
Number of Receivers: 5 receivers
השווה עם MAX3243EEAI+ →
Texas Instruments
Package: 28-pin TSSOP
Maximum Data Rate: 500 kbps
Supply Voltage Range: 3 V to 5.5 V
השווה עם MAX3243EEAI+ →
Analog Devices
Package: 32-pin TQFN with exposed pad, 7x7mm
Number of Receivers: 5
השווה עם MAX3243EEAI+ →
Analog Devices
Package: 32-pin TQFN, 7 mm x 7 mm
Maximum Data Rate: 250 kbps
Supply Voltage Range: 3.0 V to 5.5 V
השווה עם MAX3243EEAI+ →
MaxLinear
Package: QFN-32 (5x5 mm) with thermal pad
השווה עם MAX3243EEAI+ →

MAX3243EEAI-T

✅ Drop-In
📦 SSOP-28
Same MAX3243E 3/5-channel interface and 3.0V-to-5.5V operation; order-code packaging differs by 0% in core electrical ratings

📋 חלופה להתייחסות (לא בקטלוג)

MAX3243EEAI+G071

✅ Drop-In
Analog Devices
📦 SSOP-28
3/5 RS-232 transceiver · 3.0V to 5.5V · 250kbps · 4 · 4 · EIA/TIA-232 and V.28/V.24 · ±15kV · Yes

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3243EEAI+TG071

✅ Drop-In
📦 SSOP-28
Same MAX3243E 3/5-channel interface and 3.0V-to-5.5V operation; order and packaging suffix differs by 0% in core electrical ratings

📋 חלופה להתייחסות (לא בקטלוג)

MAX3241EEAI+T

✅ Drop-In
📦 SSOP-28
Identical 3.0V-to-5.5V RS-232 supply class and 28-pin SSOP format, but the receiver and transmitter allocation differs by one channel

📋 חלופה להתייחסות (לא בקטלוג)

MAX3243ECPWR

✅ Drop-In
Texas Instruments
📦 SSOP-28
3/5 multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 · 5 · 2 · ±15 kV · ±8 kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3243EEAI+ מפרטים

Product Type RS-232 transceiver
Transmitter Channels 3 channels
Receiver Channels 5 channels
Duplex Mode Full duplex
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
ESD Protection ±15kV
Communication Standard RS-232 / EIA/TIA-232
Related Interface Standards V.28 / V.24
Supply Shutdown Current 1uA
מארז 28-pin SSOP
סוג הרכבה Surface mount
AutoShutdown Feature Yes
Automatic Wake-Up Yes
External Charge-Pump Capacitors 4 capacitors of 0.1uF each
סטטוס RoHS Compliant

מדריך תצורת פינים של MAX3243EEAI+ 28-pin ssop

תצורת פינים עבור MAX3243EEAI+ (מארזת 28-pin ssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 28-pin ssop עבור MAX3243EEAI+

אין נתוני פריסת פינים מפורטים עבור MAX3243EEAI+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX3243EEAI+ מתאים עבור 6 יישוםs: Industrial Serial Control, Point-of-Sale Equipment, Data-Acquisition Systems, Embedded Equipment Communication, Instrumentation and Test Equipment, Communication Port Multiplier.

🏭

Industrial Serial Control

The MAX3243EEAI+ suits industrial controllers that must exchange command and status information over RS-232. Its three transmitters can drive up to three separate communication buses, while five receivers can monitor several incoming signals from one peripheral or distribute returned data. Operation from 3.0V to 5.5V allows direct use with 3.3V controllers and 5V industrial logic. The 250kbps maximum data rate supports responsive command traffic, while ±15kV ESD protection improves robustness at connector-adjacent circuitry. Designers should preserve the required charge-pump capacitor placement and keep protected cable-side routing separated from precision analog sections.

🖥️

Point-of-Sale Equipment

Point-of-sale terminals and peripheral interfaces can use the MAX3243EEAI+ to connect a low-voltage controller to RS-232 devices such as printers, scanners, or customer displays. The three-driver configuration supports several attached devices, and the five-receiver configuration is useful when multiple peripheral outputs must feed the host. The 3.0V-to-5.5V supply range accommodates both 3.3V and 5V system logic without requiring a 12V RS-232 supply. At the 250kbps limit, cable length and loading must be checked against the selected standard. Automatic shutdown can also reduce consumption when the terminal's serial ports are not continuously active.

📡

Data-Acquisition Systems

The MAX3243EEAI+ can bridge a controller or data-acquisition unit to legacy RS-232 instruments. Five receiver inputs provide flexibility when an instrument exposes status, alarm, or handshake lines in addition to the primary data channel. Three transmitter outputs can connect control commands to more than one instrument while retaining a common logic interface. The low 3.0V-to-5.5V operating range is useful in compact acquisition equipment, while automatic shutdown permits low-power operation between measurement cycles. Engineers should verify instrument logic levels, connector pin assignments, cable shielding, and the MANCHESTER/RS-232 signaling expectations of the connected equipment before deployment.

🔧

Embedded Equipment Communication

Embedded equipment can use the MAX3243EEAI+ to add a robust RS-232 port to a 3.3V or 5V controller. The three transmitters and five receivers allow one serial interface module to serve several buses or status inputs without duplicating driver and receiver packages. Its 250kbps capability is suitable for configuration commands, diagnostic data, and short industrial messages. The automatic shutdown and wake-up functions help manage power in intermittently connected equipment, while ±15kV ESD protection strengthens the external interface. Board layout should follow the recommended charge-pump capacitor connections and keep the cable-facing nets away from high-impedance analog inputs.

🧩

Instrumentation and Test Equipment

The MAX3243EEAI+ is appropriate for laboratory and field instrumentation that retains RS-232 compatibility while using modern low-voltage control electronics. Five receiver channels can accept trigger, ready, alarm, and data signals, while three transmitter channels can connect to separate test fixtures or controlled devices. The 250kbps rate is appropriate for many short-distance control protocols, and the 3.0V-to-5.5V operating range simplifies power architecture. Because instrumentation systems often contain sensitive analog sections, the cable-side nets and charge-pump outputs should be physically separated from precision signal paths. Grounding and shield-return strategies should be established for the complete instrument rather than only the transceiver.

🌐

Communication Port Multiplier

The asymmetric 3/5 channel arrangement makes the MAX3243EEAI+ useful in communication-port multipliers where a central controller sends commands to several RS-232 targets and monitors multiple status returns. Its full-duplex operation supports simultaneous transmit and receive activity, and the 250kbps data rate is suitable for short control links. Operation from 3.0V to 5.5V supports mixed-voltage logic systems, while automatic shutdown reduces power when no traffic is present. The external charge-pump network and all shutdown-control nets must follow the manufacturer application circuit, and each connected RS-232 port needs appropriate cable strain relief and protection for its environmental conditions.

What is the MAX3243EEAI+?
The MAX3243EEAI+ is a 3.0V to 5.5V, 250kbps RS-232 transceiver with three drivers and five receivers in a 28-pin SSOP package. According to the Analog Devices MAX3243 datasheet, it combines EIA/TIA-232 line drivers and receivers with automatic shutdown, automatic wake-up, charge-pump voltage generation, and ±15kV ESD protection. It is intended for industrial and embedded systems that require a low-voltage logic side and bipolar RS-232 communications.
What is the operating voltage of MAX3243EEAI+?
The MAX3243EEAI+ operates from 3.0V to 5.5V. The Analog Devices MAX3243 datasheet identifies the MAX3243E family as a 3V-powered RS-232 interface capable of true RS-232 operation from a single low-voltage supply. This makes it suitable for systems using 3.3V or 5V control logic. The supply pins and charge-pump capacitor connections should still be designed according to the manufacturer's recommended application circuit.
How many RS-232 drivers and receivers does MAX3243EEAI+ have?
The MAX3243EEAI+ provides three RS-232 transmitter channels and five receiver channels. The Analog Devices product description identifies it as a 3/5 transceiver with full-duplex operation. This asymmetric arrangement lets a system drive three RS-232 lines while monitoring five incoming signals. The larger receiver count can also support distribution of one received data stream to multiple compatible logic inputs.
What is the maximum data rate of MAX3243EEAI+?
The MAX3243EEAI+ supports a maximum data rate of 250kbps. This rating is stated in the Analog Devices MAX3243E datasheet and is suitable for short- and medium-distance point-to-point RS-232 links using properly shielded cable. Actual channel performance can be affected by cable length, data rate, load capacitance, grounding, and the compliance requirements of the connected equipment, so those conditions should be checked before deployment.
Does MAX3243EEAI+ provide ESD protection?
The MAX3243EEAI+ provides enhanced ±15kV ESD protection on its RS-232 interface pins. The Analog Devices MAX3243E datasheet describes the family as having enhanced electrostatic-discharge protection for systems exposed to cable transients and electrostatic discharge. Protection reduces stress on the transceiver, but external surge protection, proper cable grounding, and suitable enclosure design may still be needed in severe industrial environments.
Where can I download the MAX3243EEAI+ datasheet PDF?
The official MAX3243EEAI+ datasheet and supporting documentation are available from the Analog Devices MAX3243 product page at https://www.analog.com/en/products/max3243.html. The page links to the MAX3243 data sheet, product selection information, and ordering details. Use the MAX3243E family data sheet to confirm pin functions, recommended charge-pump capacitors, shutdown behavior, and electrical characteristics before placing the 28-pin SSOP component.
Where can I find the MAX3243EEAI+ pinout?
The MAX3243EEAI+ pinout is documented in the Analog Devices MAX3243E family datasheet under the pin-description and package-information sections. The component uses a 28-pin SSOP and includes supply, ground, driver outputs, receiver inputs, shutdown control, enhanced-power-management control, and charge-pump capacitor connections. Use the datasheet pin table directly when assigning PCB nets because the exposed connector-side functions must not be interchanged with logic-side signals.
What can replace the MAX3243EEAI+?
The closest documented choices are MAX3243EEAI-T and MAX3243EEAI+G071, which retain the MAX3243EEAI+ device identity and 28-pin SSOP format while changing order or packaging codes. MAX3241EEAI+T is identified as a parametric equivalent but has a different channel arrangement. Verify the complete pin description, supply limits, channel count, ESD rating, and external capacitor requirements before treating any substitution as a drop-in replacement.
Is MAX3243EEAI+ the same as MAX3241EEAI+?
No, the MAX3243EEAI+ and MAX3241EEAI+ are not fully interchangeable. The MAX3243EEAI+ provides three drivers and five receivers, while MAX3241-family devices have a different driver and receiver allocation and omit the MAX3243E automatic shutdown and wake-up feature described for this family. Their similar low-voltage RS-232 function does not guarantee identical pin behavior, so the MAX3241EEAI+T should be treated as a parametric equivalent rather than an unconditional drop-in replacement.
When should I choose MAX3243EEAI+ instead of MAX3241EEAI+?
Choose the MAX3243EEAI+ when the design needs five receive channels, three transmit channels, automatic shutdown, and automatic wake-up in one 28-pin SSOP device. The MAX3241 family is more appropriate when fewer channels and a simpler low-power RS-232 interface are sufficient. The decision should be based on the exact pin configuration and control requirements in the manufacturer datasheets, not solely on the common 3.0V-to-5.5V supply range.
MAX3243EEAI+ vs MAX3243EEAI-T - which should I select?
MAX3243EEAI+ and MAX3243EEAI-T identify closely related order forms of the same MAX3243E interface, but their final ordering codes can indicate different packaging or shipment configurations. The MAX3243EEAI+ is the specified target and is listed in a 28-pin SSOP package. Confirm the exact package, reel orientation, quantity, and marking against the manufacturer ordering information before using MAX3243EEAI-T in production.
Where can I buy MAX3243EEAI+ online?
Use the Request a Quote form on this page to request MAX3243EEAI+ pricing, availability, lead time, and order handling. The Analog Devices product page confirms that MAX3243E devices are in production and provides official documentation and product-selection information. For production planning, specify the exact 28-pin SSOP order code, quantity, target delivery date, and whether reel packaging is required with your request.
What is the lead time for MAX3243EEAI+?
Submit the MAX3243EEAI+ quantity and required delivery date through the Request a Quote form on this page. Lead time depends on order quantity, package configuration, manufacturing schedules, and current component availability, so it should be confirmed for each production order. The manufacturer lists the MAX3243E family as production, but that status does not constitute a fixed lead-time commitment or an inventory guarantee.
Is MAX3243EEAI+ in stock?
Current MAX3243EEAI+ stock should be confirmed through the Request a Quote form on this page by entering the required quantity and package details. The Analog Devices MAX3243 product page identifies the family as production and provides official ordering information, but real-time stock can vary by order quantity and manufacturing schedule. A quote response can establish current availability, lead time, and the exact suffix and packaging configuration to be supplied.
What are the key specifications of MAX3243EEAI+ that engineers should know?
The principal MAX3243EEAI+ specifications are a 3.0V-to-5.5V supply range, 250kbps maximum signaling rate, three transmitters, five receivers, full-duplex operation, automatic shutdown and wake-up, and ±15kV ESD protection. The Analog Devices MAX3243 datasheet also identifies four external 0.1uF charge-pump capacitors and a 28-pin SSOP package. These parameters determine interface-channel count, power behavior, line protection, and PCB compatibility.
What is the best Maxim Integrated equivalent for MAX3243EEAI+?
The closest Maxim Integrated candidates identified for MAX3243EEAI+ are MAX3243EEAI-T, MAX3243EEAI+G071, and MAX3243EEAI+TG071 because they retain the MAX3243E device family, 3/5 channel arrangement, and 28-pin SSOP format. Their order-code differences must be checked for packaging and marking. MAX3241EEAI+T is a documented parametric equivalent, but its different channel arrangement and shutdown feature make it a less direct replacement.

נתוני עזר הנדסיים עבור MAX3243EEAI+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX3243EEAI+ when the design needs a 28-pin RS-232 interface with three transmitters, five receivers, 3.0V-to-5.5V operation, 250kbps data rate, automatic shutdown, automatic wake-up, and ±15kV ESD protection. MAX3243EEAI-T, MAX3243EEAI+G071, MAX3243EEAI+TG071, and MAX3243ECPWR are preferred when the core MAX3243E function is needed but a different supported order or packaging code is more suitable for assembly. MAX3241EEAI+T is reasonable for a simpler interface with fewer channels and no need for the MAX3243E automatic shutdown feature, but it should not be treated as automatically interchangeable. For every candidate, verify package dimensions, pin descriptions, control-input polarity, charge-pump capacitor arrangement, ESD rating, operating temperature, and production ordering information against the manufacturer datasheet before releasing the PCB or production BOM.

השוואה עם חלופות

פרמטר מוצר זה MAX3243EEAI-T MAX3243EEAI+G071 MAX3243EEAI+TG071 MAX3241EEAI+T MAX3243ECPWR
Package SSOP-28 SSOP-28 SSOP-28 SSOP-28 SSOP-28 SSOP-28
Brand Analog Devices Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Transmitter Channels 3 3 3 3 2 3
Receiver Channels 5 5 5 5 2 5
AutoShutdown Feature Yes Yes Yes Yes No Yes
External Charge-Pump Capacitors 4 × 0.1uF 4 × 0.1uF 4 × 0.1uF 4 × 0.1uF 4 × 0.1uF 4 × 0.1uF

מבדילים עיקריים

  • Five receiver channels support broader status monitoring (לעומתMAX3241EEAI+T)
  • Automatic shutdown and wake-up support low-power control (לעומתMAX3241EEAI+T)
  • Three transmit channels simplify multi-port designs (לעומתMAX3241EEAI+T)
  • The complete MAX3243E option set preserves family electrical ratings (לעומתMAX3243ECPWR)

הערות תכנון

Place the four external 0.1uF charge-pump capacitors close to the corresponding MAX3243EEAI+ pins, using short traces and a solid ground connection. Keep the charge-pump nets away from sensitive receiver inputs and analog circuitry because switching energy can couple into nearby nodes. Follow the Analog Devices MAX3243E recommended application circuit for capacitor selection and pin connections rather than substituting generic high-capacitance values without checking stability and timing.

Separate connector-side driver and receiver routes from low-level logic-side traces. RS-232 driver outputs use high-voltage bipolar levels and can couple switching transients into adjacent circuitry even when ESD protection is fitted. Route these nets away from precision analog inputs, crystal circuits, and sensitive reset networks. Use a clear ground reference and return path for each cable, and place optional protection components near the connector where transient energy first enters the board.

Do not assume that every MAX3243-family ordering suffix is electrically and logistically identical. Confirm the 28-pin SSOP package, pin assignment, shutdown polarity, charge-pump connections, and marking for MAX3243EEAI-T, MAX3243EEAI+G071, MAX3243EEAI+TG071, MAX3241EEAI+T, and MAX3243ECPWR. The MAX3241 family has a different channel allocation, so treating it as interchangeable without reviewing the datasheet can leave unused or inaccessible lines.

Design the 3.0V-to-5.5V supply path for both logic load and the charge-pump current drawn by RS-232 transmission. Decouple the supply pins locally with the capacitance specified by the manufacturer application circuit. Account for the 1uA shutdown current when calculating standby power, while separately evaluating active transmission demand because shutdown current does not represent the current consumed during continuous data activity.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance and a lead-free ordering option are identified for the MAX3243E family. REACH, halogen-free status, and conflict-minerals status are not stated in the cited product information.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

max3243eeai datasheet MAX3243EEAI+ datasheet pdf MAX3243EEAI+ pinout MAX3243EEAI+ equivalent MAX3243EEAI+ replacement MAX3243EEAI+ cross reference MAX3243EEAI+ SSOP-28 footprint MAX3243EEAI+ RS-232 application circuit MAX3243EEAI+ vs MAX3241EEAI+T Analog Devices MAX3243EEAI+ MAX3243EEAI+ price MAX3243EEAI+ stock

רכיבים ומונחים קשורים

Analog Devices Maxim Integrated MAX3243EEAI+ MAX3243EEAI-T MAX3243EEAI+G071 MAX3243EEAI+TG071 MAX3241EEAI+T MAX3243ECPWR MAX3243E RS-232 transceiver EIA/TIA-232 V.28 V.24 full-duplex interface RS-232 line driver RS-232 line receiver charge-pump voltage converter AutoShutdown automatic wake-up 15kV ESD protection 3.0V to 5.5V supply 250kbps data rate SSOP-28 surface mount
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר