Maxim Integrated

MAX499CWG - 3-Channel 250MHz Video Switch | Maxim

MPN: MAX499CWG ✓ Hoạt động
24-pin SOIC Package
MOQ: 1 |

MAX499CWG Tóm tắt

The Maxim Integrated MAX499CWG is a three-channel SPDT RGB video switch with integrated video buffer amplifiers, designed for routing analog video signals in professional video equipment, test systems, broadcast infrastructure, and multimedia equipment. The device provides a 250 MHz small-signal -3 dB bandwidth, a 135 MHz full-power -3 dB bandwidth, and a 1250 V/µs slew rate. It is supplied in a 24-pin surface-mount SOIC package.

A video switch is an analog signal-routing component that connects one source to a selected destination while preserving signal amplitude and timing. The MAX499CWG belongs to the analog switch and video buffer amplifier category, combining SPDT routing with active output stages. This integration reduces the number of external buffer components required when several RGB video paths must be switched.

The principal performance characteristics include 250 MHz small-signal bandwidth, 135 MHz full-power bandwidth, 0.1 dB gain flatness, a 1250 V/µs slew rate, and 0.03° differential or 0.06% differential settling characteristics. These figures make the device suitable for video paths in which higher-bandwidth content, including standard-definition and higher-resolution consumer video signals, must pass through the switching stage.

The MAX499 offers three independently controlled switching channels. Each channel combines an SPDT switch with a video buffer amplifier, allowing an incoming signal to be routed between two possible output paths while maintaining a low-impedance drive capability. The MAX499 dissipation is 300 mW with all output buffers enabled and 100 mW with all buffers disabled when operated from ±5 V supplies, according to the manufacturer datasheet.

Typical uses include RGB video routing in broadcast and presentation equipment, video test and measurement systems, computer-video interfaces, video switchers, and multimedia consoles. The integrated buffers are particularly useful when the selected destination would otherwise require a separate video amplifier to drive downstream cabling or another video stage.

PCB design should account for the 24-pin SOIC footprint, clean supply connections, and the high slew rate of the output amplifiers. Keep video traces short, provide solid ground-plane continuity, and place decoupling capacitors close to the supply pins. Because the amplifiers can operate from dual supplies, unused supply rails and unused channels should be handled according to the manufacturer application guidance to avoid unnecessary current or signal-path issues.

This product page combines the manufacturer performance data with practical routing, layout, and selection guidance. It also distinguishes the MAX499CWG from four-channel MAX498 variants and documents where engineering verification is still required before substituting a different package, temperature grade, or function-compatible switch.

Bộ thay thế dễ dàng lắp đặt cho MAX499CWG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

MAX499CWG Tỷ lệ tối đa & tính chất điện

Number of Channels 3 channels
Switch Configuration SPDT
Signal Type RGB analog video
Small-Signal -3 dB Bandwidth 250 MHz
Full-Power -3 dB Bandwidth 135 MHz
Gain Flatness 0.1 dB
Slew Rate 1250 V/µs to 0.1% settling time
Differential Settling Error 0.03° or 0.06%
Enabled Power Dissipation 300 mW typical at ±5 V
Disabled Power Dissipation 100 mW typical at ±5 V
Hộp 24-pin SOIC
Kiểu lắp đặt Surface mount
Temperature Grade Commercial
Number of Terminals 24 terminals

Hướng dẫn cấu hình chân MAX499CWG 24-pin soic

Cấu hình chân cho MAX499CWG (24-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 24-pin soic cho MAX499CWG

Không có dữ liệu chân cụ thể sẵn có cho MAX499CWG.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX499CWG phù hợp cho 6 Áp dụngs: Broadcast RGB Video Routing, Video Test and Measurement, Professional Video Mixers, Computer and Multimedia Video Switching, Video Presentation Equipment, Analog Video Matrix and Patch Systems.

📺

Broadcast RGB Video Routing

The MAX499CWG is suitable for broadcast-style RGB routing because it combines three SPDT switches with active video buffers in one 24-pin SOIC device. Its 250 MHz small-signal bandwidth and 135 MHz full-power bandwidth support fast analog transitions while the 0.1 dB gain-flatness specification helps limit amplitude variation across the usable frequency range. A broadcaster can route a source between two destinations or isolate inputs during test operations. The 1250 V/µs slew rate improves edge reproduction, but short traces, a continuous ground plane, and local supply bypassing remain essential for controlling reflection and crosstalk in rack-level video equipment.

📺

Video Test and Measurement

The MAX499CWG can serve as the routing element in a video test system that connects RGB signals to an analyzer, reference source, or display. Its 135 MHz full-power bandwidth and 250 MHz small-signal bandwidth provide useful headroom for high-bandwidth video signals, while the integrated buffer reduces the need for separate amplifiers immediately after the switch. The 0.03° or 0.06% differential settling characteristics are relevant when timing or transient behavior is measured. For repeatable results, keep input and output paths short, use a low-impedance ground reference, and decouple the dual supply rails close to the device.

🎥

Professional Video Mixers

MAX499CWG fits professional video mixers and production switchers that need to route multiple RGB signals between processing stages. Three channels provide a practical match for systems handling red, green, and blue paths independently, and the integrated buffers can drive the next stage more effectively than an unbuffered passive switch. The MAX499’s 1250 V/µs slew rate preserves rapid transitions, while its 0.1 dB gain-flatness characteristic supports consistent video amplitude. Designers should preserve ground-plane continuity, avoid long routes around connector or processor sections, and check channel enable sequencing in the complete switching system.

🖥️

Computer and Multimedia Video Switching

The MAX499CWG is applicable to computer-video and multimedia switching equipment that selects among multiple RGB sources. Its three independent SPDT channels permit source selection without adding a separate amplifier after each routing point, and the 250 MHz small-signal bandwidth covers a broad range of analog video content. The commercial 24-pin SOIC package supports surface-mount assembly but requires careful handling of high-speed edges around connectors and processor interfaces. Use short video traces, maintain a common ground plane, and place bypass capacitors near the supply pins to minimize noise coupling into downstream display circuitry.

📺

Video Presentation Equipment

MAX499CWG can route RGB signals in presentation systems that combine computers, playback devices, and projection equipment. The integrated video buffers help isolate selected outputs and provide a more suitable drive level for downstream cables and receivers. A 135 MHz full-power bandwidth and 0.1 dB gain flatness support consistent signal transfer, while the 1250 V/µs slew rate accommodates fast transitions. Because presentation equipment may contain switching regulators and long cable runs, designers should use a continuous ground plane, keep the MAX499 output routes compact, and validate the completed system for crosstalk, ringing, and ground-offset errors.

🌐

Analog Video Matrix and Patch Systems

The MAX499CWG can be used in compact analog video matrices or patch systems that route three RGB-related paths between source and destination modules. SPDT switching gives each channel two selectable routes, while the integrated buffer improves drive capability into the next stage. The MAX499 consumes less enabled dissipation than the four-channel MAX498, which is 300 mW versus 390 mW under ±5 V operation, making it potentially preferable when only three channels are needed. System planners should still evaluate channel count, source impedance, cable loading, and thermal performance across the complete matrix rather than treating the IC as an unrestricted cable driver.

Tóm tắt các sản phẩm được đề xuất

MAX499CWG Maxim Integrated Được sử dụng trong: Broadcast RGB Video Routing, Video Test and Measurement, Professional Video Mixers, Computer and Multimedia Video Switching, Video Presentation Equipment, Analog Video Matrix and Patch Systems MAX499CWG+ Related MAX499 ordering form Được sử dụng trong: Broadcast RGB Video Routing, Video Test and Measurement, Professional Video Mixers, Computer and Multimedia Video Switching, Video Presentation Equipment, Analog Video Matrix and Patch Systems
What is the MAX499CWG?
The MAX499CWG is a three-channel SPDT RGB video switch with integrated 250 MHz video buffer amplifiers in a 24-pin SOIC package. According to the Maxim Integrated MAX498/MAX499 datasheet, it provides a 135 MHz full-power -3 dB bandwidth, 0.1 dB gain flatness, and a 1250 V/µs slew rate. The device is intended for analog video routing, test equipment, broadcast systems, and multimedia consoles.
What are the key specifications of MAX499CWG that engineers should know?
The MAX499CWG provides three SPDT RGB video channels, 250 MHz small-signal bandwidth, 135 MHz full-power bandwidth, 0.1 dB gain flatness, and a 1250 V/µs slew rate. According to the Maxim Integrated MAX498/MAX499 datasheet, typical dissipation is 300 mW with all buffers enabled and 100 mW with all buffers disabled under ±5 V operation. The device is packaged in a 24-pin SOIC.
Where can I download the MAX499CWG datasheet PDF?
The MAX499CWG datasheet PDF is available through the Maxim Integrated MAX498-MAX499 document hosted by Mouser. It contains the switch architecture, electrical characteristics, pin descriptions, typical application circuits, and buffer performance. Engineers should use the manufacturer datasheet for final pin assignment, supply requirements, exposed operating limits, and application-specific component selection.
Where can I find the MAX499CWG pinout?
The MAX499CWG pinout is defined in the pin-description section of the Maxim Integrated MAX498/MAX499 datasheet. It is a 24-pin SOIC device, and each input, output, control, supply, and ground connection must be assigned from that table before PCB routing. Use the manufacturer pin-description table when creating the symbol and verify continuity against the selected switch configuration.
Is MAX499CWG suitable for RGB video routing?
Yes, the MAX499CWG is specifically designed for SPDT RGB video routing. Its 250 MHz small-signal bandwidth, 135 MHz full-power bandwidth, and 0.1 dB gain-flatness specification support high-bandwidth analog video paths. According to the Maxim Integrated datasheet, the integrated buffers also allow the selected output to drive downstream video circuitry without requiring a separate buffer at every destination.
Can MAX499CWG be used in a video test and measurement system?
The MAX499CWG is appropriate for video test systems that route RGB signals between sources, test points, and display devices. The three independently controlled SPDT channels provide flexible signal-path selection, while the 250 MHz small-signal bandwidth and 1250 V/µs slew rate preserve fast video transitions. Short PCB traces and a continuous ground plane are important for repeatable high-bandwidth measurements.
What is the difference between MAX499CWG and MAX498?
The MAX499CWG is the three-channel MAX499 variant, while the MAX498 is the corresponding four-channel device. The manufacturer datasheet lists typical enabled dissipation of 300 mW for MAX499 and 390 mW for MAX498 from ±5 V supplies. The MAX498 also offers 130 mW dissipation when all buffers are disabled, compared with 100 mW for MAX499.
When should I choose MAX499CWG instead of MAX498?
Choose MAX499CWG when the design needs exactly three SPDT RGB video channels and wants to reduce unused circuitry compared with a four-channel MAX498. Choose MAX498 instead when a fourth routing channel is required. Both devices integrate video buffer amplifiers, so channel count and enabled power dissipation of 300 mW for MAX499 versus 390 mW for MAX498 are the principal selection points.
Is MAX499CWG the same as MAX499CWG+?
MAX499CWG and MAX499CWG+ identify ordering forms of the same MAX499 device family, but the plus-marked listing should not be treated as a distinct drop-in alternative without confirming the manufacturer’s ordering and suffix conventions. For PCB compatibility, compare the actual package, pinout, electrical ratings, and ordering documentation rather than relying only on the suffix.
What is the best drop-in replacement for MAX499CWG?
No independently verified drop-in replacement can be recommended from the available documentation alone. A valid replacement must use the same 24-pin SOIC footprint, preserve the three-channel SPDT pin arrangement, and match the 250 MHz bandwidth, 135 MHz full-power bandwidth, supply requirements, and control logic. Use the Request a Quote form on this page to ask about sourcing options, then validate any proposed substitute against the manufacturer datasheet.
Can another MAX499 suffix replace MAX499CWG?
A MAX499 suffix may represent a temperature grade, package, or ordering-code change, so it is not automatically a drop-in replacement. The replacement is suitable only after its 24-pin SOIC footprint, pin functions, supply range, operating temperature, and electrical performance have been checked against the MAX499CWG requirements. Request a quote for the exact suffix you need rather than selecting by family name alone.
Where can I buy MAX499CWG online?
Use the Request a Quote form on this page to request MAX499CWG availability, commercial terms, and current lead time. The form allows the requested quantity and package suffix to be stated precisely, reducing the risk of ordering a related MAX498, MAX499, or alternate temperature-grade variant by mistake. Current inventory and delivery scheduling should be confirmed when the quotation is returned.
What is the price of MAX499CWG?
The current price of MAX499CWG depends on order quantity, package suffix, and delivery requirements. Use the Request a Quote form on this page and specify the required quantity and target location to obtain current commercial terms. The price should not be inferred from a different MAX499 or MAX498 ordering code because channel count and suffix differences can affect availability and quoting.
What is the lead time and stock status for MAX499CWG?
Current stock and lead time should be confirmed through the Request a Quote form on this page. State the exact MAX499CWG suffix, order quantity, shipment destination, and required delivery date. This is particularly important when production scheduling depends on a fixed build window or when multiple lots must be traceable to the same ordering code.
How should MAX499CWG be placed on a PCB for high-speed video?
Place the MAX499CWG close to the video source, destination, and connector transitions, and keep the routed paths short. Maintain a continuous ground plane, provide local supply bypassing at the device pins, and avoid unnecessary test pads or long stubs on high-impedance video nets. The 1250 V/µs slew rate makes clean return paths and solid plane continuity especially important for controlling ringing and crosstalk.
Does MAX499CWG require RoHS or REACH compliance?
The RoHS and REACH status must be confirmed from the current manufacturer product documentation or declaration for the exact MAX499CWG ordering code. These compliance statements can vary by package suffix and regional product record, so they should not be inferred solely from the device family name. Request the current compliance documents through the Request a Quote form when a formal declaration is required.

Dữ liệu tham khảo kỹ thuật cho MAX499CWG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX499CWG when a design needs exactly three SPDT RGB video channels, active output buffering, and a 24-pin SOIC footprint. Its 250 MHz small-signal bandwidth, 135 MHz full-power bandwidth, and 1250 V/µs slew rate suit video routing, test, broadcast, presentation, and multimedia systems. Choose the four-channel MAX498 when a fourth signal path is necessary and the additional board area and higher enabled dissipation are acceptable. Do not select a replacement solely because it is described as an equivalent switch: verify the footprint, pin arrangement, control logic, supply requirements, bandwidth, output drive, and operating temperature. A related MAX499 ordering suffix should be used only after its package and temperature-grade details are confirmed. For availability and lead time, submit the exact suffix and required quantity through the Request a Quote form on this page.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Maxim Integrated
Package 24-pin SOIC
Number of Channels 3
Switch Configuration SPDT
Small-Signal -3 dB Bandwidth 250 MHz
Full-Power -3 dB Bandwidth 135 MHz
Gain Flatness 0.1 dB
Slew Rate 1250 V/µs to 0.1% settling time
Enabled Power Dissipation 300 mW typical at ±5 V
Disabled Power Dissipation 100 mW typical at ±5 V
Signal Type RGB analog video

Bảo phân biệt quan trọng

  • Three integrated SPDT channels with video buffers (vsMAX498)
  • High small-signal bandwidth in a compact SOIC (vsMAX498)
  • Separate control of integrated output buffers (vsUnbuffered SPDT switch alternatives)

Ghi chú thiết kế

Place the MAX499CWG near the video connectors or signal-processing stages that create the longest routing paths. Keep RGB traces short and continuous, remove unnecessary test-point stubs, and use a solid ground plane beneath and around the device. The 1250 V/µs slew rate can expose trace discontinuities, connector transitions, and impedance changes as ringing, so the complete signal path should be reviewed with the intended cable and connector loads.

Connect the dual supply rails with low-impedance traces and place the required decoupling capacitors close to the corresponding device pins. The manufacturer datasheet specifies typical dissipation of 300 mW with all three output buffers enabled and 100 mW with all buffers disabled under ±5 V operation. Estimate the worst-case board-level dissipation from actual channel state and ambient temperature, then verify that the PCB copper and surrounding airflow keep the device within its specified operating conditions.

Check source impedance, destination loading, cable length, and output-buffer enable state as one signal-chain design rather than tuning them independently. The 250 MHz small-signal and 135 MHz full-power bandwidth figures describe device performance under specified conditions, not guaranteed bandwidth for every external load. Use controlled-impedance routing where appropriate and inspect the assembled video path with an oscilloscope for overshoot, ringing, crosstalk, and settling.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer documentation used for this product does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for the exact ordering code. Request current compliance documentation for MAX499CWG through the Request a Quote form when a formal declaration is required.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX499CWG datasheet MAX499CWG pinout MAX499CWG datasheet pdf MAX499CWG equivalent MAX499CWG replacement MAX499CWG cross reference MAX499CWG vs MAX498 MAX499CWG 24-SOIC footprint MAX499CWG 250MHz bandwidth MAX499CWG RGB video switch Maxim Integrated MAX499CWG MAX499CWG price MAX499CWG stock MAX499CWG application circuit

Các bộ phận và thuật ngữ liên quan

Maxim Integrated MAX499CWG MAX499CWG+ MAX498 RGB video switch SPT switch analog switch video buffer amplifier analog video routing small-signal bandwidth full-power bandwidth gain flatness slew rate differential settling error 24-pin SOIC SOIC package family surface-mount package broadcast video equipment video test and measurement professional video switching multimedia equipment power dissipation dual supply signal integrity PCB layout
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ