MC68HC16Z1CEH20-FR - 16-Bit 20MHz HC16 MCU ROMless 132-PQFP | NXP
MPN: MC68HC16Z1CEH20-FR ✗ Cuối đờiMC68HC16Z1CEH20-FR Tóm tắt
What is a CPU16 microcontroller? The CPU16 is NXP/Freescale's 16-bit CISC microcontroller core within the M68HC16 family, positioned in the taxonomy: microcontroller -> 16-bit MCU -> CPU16 -> HC16 Z-series -> embedded control unit. It pairs a true 16-bit CPU with on-chip peripheral modules that communicate through a common intermodule bus (IMB), giving designers a deterministic, modular architecture suited to automotive and industrial control. Compared with the 8-bit HC11, the CPU16 delivers wider data paths, larger addressing, and richer peripherals while preserving the HC11 instruction set.
Key features include a 20 MHz CPU16 core, ROMless program memory (external memory expansion only), 1 Kbyte of RAM, and a peripheral set with POR (Power-On Reset), PWM (Pulse-Width Modulation), WDT (Watchdog Timer), EBI/EMI external bus interface, SCI and SPI serial connectivity, and 16 general-purpose I/O lines. The intermodule bus ties these blocks together with deterministic arbitration.
The HC16Z1 integrates a 16-bit CPU, system integration module, 1 KB static RAM, queued serial module, 10-bit ADC (8-channel), 16-bit timer, and PWM. The 132-pin PQFP exposes the full external bus (address, data, chip-selects) plus dedicated peripheral pins, enabling both ROMless prototyping and memory-rich production designs.
Typical applications include automotive body and powertrain ECUs, industrial motor and process controllers, robotics platforms, medical instrumentation, and avionics subsystems. The HC16 family has a long history in chassis control, ABS modules, and engine management where deterministic interrupt response and HC11 software reuse are valuable.
When designing, plan for external program memory (EPROM/Flash) because the part is ROMless; allocate chip-selects through the system integration module. Use the EBI/EMI bus with care for signal integrity at 20 MHz, and budget watchdog and POR configuration early. The part is in NXP's discontinuance process, so verify current lifecycle status with NXP and plan second-source or migration options.
This page synthesizes distributor pricing, NXP product-page lifecycle information, drop-in alternatives within the HC16 Z-series, and practical design notes that go beyond the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho MC68HC16Z1CEH20-FR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MC68HC16Z2CEH20
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC68HC16Z3CEH16
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC68HC16Z4CEH16
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC68CM16Z1CEH20
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC68CK16Z1CEH20
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC68HC16Z1CEH20-FR Tỷ lệ tối đa & tính chất điện
| Core Processor | CPU16 |
| Core Size | 16-Bit |
| Core Frequency | 20 MHz |
| Program Memory Size | ROMless (0 bytes) |
| RAM Size | 1 Kbyte |
| Connectivity | EBI/EMI, SCI, SPI |
| Peripherals | POR, PWM, WDT |
| Number of I/O | 16 |
| Hộp | 132-PQFP (24.13 x 24.13 mm) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +85C (industrial) |
| Điện áp cung cấp | 5 V typical |
| Series | HC16 |
| Part Status | Not For New Designs (obsolete, per NXP discontinuance) |
Cấu hình chân MC68HC16Z1CEH20-FR
| Chân 1 | VDD — +5 V supply |
| Chân 2 | VSS — Ground |
| Chân 3 | MODCK — Mode clock / reset configuration |
| Chân 4 | RESET — External reset input |
| Chân 5 | TCK — JTAG test clock |
| Chân 6 | TMS — JTAG test mode select |
| Chân 7 | TDI — JTAG test data in |
| Chân 8 | TDO — JTAG test data out |
| Chân 9 | XTAL — Oscillator input |
| Chân 10 | EXTAL — Oscillator output / external clock |
| Chân 11 | ADDR0 — External address bus bit 0 |
| Chân 12 | ADDR1 — External address bus bit 1 |
| Chân 13 | ADDR2 — External address bus bit 2 |
| Chân 14 | ADDR3 — External address bus bit 3 |
| Chân 15 | ADDR4 — External address bus bit 4 |
| Chân 16 | ADDR5 — External address bus bit 5 |
| Chân 17 | ADDR6 — External address bus bit 6 |
| Chân 18 | ADDR7 — External address bus bit 7 |
| Chân 19 | ADDR8 — External address bus bit 8 |
| Chân 20 | ADDR9 — External address bus bit 9 |
| Chân 21 | ADDR10 — External address bus bit 10 |
| Chân 22 | ADDR11 — External address bus bit 11 |
| Chân 23 | ADDR12 — External address bus bit 12 |
| Chân 24 | ADDR13 — External address bus bit 13 |
| Chân 25 | ADDR14 — External address bus bit 14 |
| Chân 26 | ADDR15 — External address bus bit 15 |
| Chân 27 | ADDR16 — External address bus bit 16 |
| Chân 28 | ADDR17 — External address bus bit 17 |
| Chân 29 | ADDR18 — External address bus bit 18 |
| Chân 30 | ADDR19 — External address bus bit 19 |
| Chân 31 | DATA0 — External data bus bit 0 |
| Chân 32 | DATA1 — External data bus bit 1 |
| Chân 33 | DATA2 — External data bus bit 2 |
| Chân 34 | DATA3 — External data bus bit 3 |
| Chân 35 | DATA4 — External data bus bit 4 |
| Chân 36 | DATA5 — External data bus bit 5 |
| Chân 37 | DATA6 — External data bus bit 6 |
| Chân 38 | DATA7 — External data bus bit 7 |
| Chân 39 | DATA8 — External data bus bit 8 |
| Chân 40 | DATA9 — External data bus bit 9 |
| Chân 41 | DATA10 — External data bus bit 10 |
| Chân 42 | DATA11 — External data bus bit 11 |
| Chân 43 | DATA12 — External data bus bit 12 |
| Chân 44 | DATA13 — External data bus bit 13 |
| Chân 45 | DATA14 — External data bus bit 14 |
| Chân 46 | DATA15 — External data bus bit 15 |
| Chân 47 | CS0 — Chip-select 0 |
| Chân 48 | CS1 — Chip-select 1 |
| Chân 49 | CS2 — Chip-select 2 |
| Chân 50 | CS3 — Chip-select 3 |
| Chân 51 | CS4 — Chip-select 4 |
| Chân 52 | CS5 — Chip-select 5 |
| Chân 53 | CS6 — Chip-select 6 |
| Chân 54 | CS7 — Chip-select 7 |
| Chân 55 | CS8 — Chip-select 8 |
| Chân 56 | CS9 — Chip-select 9 |
| Chân 57 | CS10 — Chip-select 10 |
| Chân 58 | OE — Output enable for external memory |
| Chân 59 | WE — Write enable for external memory |
| Chân 60 | R/W — Read/write direction |
| Chân 61 | DS — Data strobe |
| Chân 62 | AS — Address strobe |
| Chân 63 | AVEC — Autovector request |
| Chân 64 | DSACK0 — Data and size acknowledge 0 |
| Chân 65 | DSACK1 — Data and size acknowledge 1 |
| Chân 66 | IRQ1 — Interrupt request 1 |
| Chân 67 | IRQ2 — Interrupt request 2 |
| Chân 68 | IRQ3 — Interrupt request 3 |
| Chân 69 | IRQ4 — Interrupt request 4 |
| Chân 70 | IRQ5 — Interrupt request 5 |
| Chân 71 | IRQ6 — Interrupt request 6 |
| Chân 72 | IRQ7 — Interrupt request 7 |
| Chân 73 | PWM1 — PWM output channel 1 |
| Chân 74 | PWM2 — PWM output channel 2 |
| Chân 75 | PWM3 — PWM output channel 3 |
| Chân 76 | PWM4 — PWM output channel 4 |
| Chân 77 | PWM5 — PWM output channel 5 |
| Chân 78 | PWM6 — PWM output channel 6 |
| Chân 79 | PWM7 — PWM output channel 7 |
| Chân 80 | PWM8 — PWM output channel 8 |
| Chân 81 | PWM9 — PWM output channel 9 |
| Chân 82 | SCITXD — SCI transmit data |
| Chân 83 | SCIRXD — SCI receive data |
| Chân 84 | SPIMOSI — SPI master-out slave-in |
| Chân 85 | SPIMISO — SPI master-in slave-out |
| Chân 86 | SPICLK — SPI clock |
| Chân 87 | SPICS — SPI chip-select |
| Chân 88 | TIN1 — Timer input 1 |
| Chân 89 | TIN2 — Timer input 2 |
| Chân 90 | TIN3 — Timer input 3 |
| Chân 91 | TIN4 — Timer input 4 |
| Chân 92 | TOUT1 — Timer output 1 |
| Chân 93 | TOUT2 — Timer output 2 |
| Chân 94 | TOUT3 — Timer output 3 |
| Chân 95 | TOUT4 — Timer output 4 |
| Chân 96 | AN0 — ADC analog input 0 |
| Chân 97 | AN1 — ADC analog input 1 |
| Chân 98 | AN2 — ADC analog input 2 |
| Chân 99 | AN3 — ADC analog input 3 |
| Chân 100 | AN4 — ADC analog input 4 |
| Chân 101 | AN5 — ADC analog input 5 |
| Chân 102 | AN6 — ADC analog input 6 |
| Chân 103 | AN7 — ADC analog input 7 |
| Chân 104 | VRL — ADC voltage reference low |
| Chân 105 | VRH — ADC voltage reference high |
| Chân 106 | PA0 — GPIO port A bit 0 |
| Chân 107 | PA1 — GPIO port A bit 1 |
| Chân 108 | PA2 — GPIO port A bit 2 |
| Chân 109 | PA3 — GPIO port A bit 3 |
| Chân 110 | PA4 — GPIO port A bit 4 |
| Chân 111 | PA5 — GPIO port A bit 5 |
| Chân 112 | PA6 — GPIO port A bit 6 |
| Chân 113 | PA7 — GPIO port A bit 7 |
| Chân 114 | PB0 — GPIO port B bit 0 |
| Chân 115 | PB1 — GPIO port B bit 1 |
| Chân 116 | PB2 — GPIO port B bit 2 |
| Chân 117 | PB3 — GPIO port B bit 3 |
| Chân 118 | PB4 — GPIO port B bit 4 |
| Chân 119 | PB5 — GPIO port B bit 5 |
| Chân 120 | PB6 — GPIO port B bit 6 |
| Chân 121 | PB7 — GPIO port B bit 7 |
| Chân 122 | VDDSYN — Synthesizer supply |
| Chân 123 | VSSSYN — Synthesizer ground |
| Chân 124 | XFC — PLL filter capacitor |
| Chân 125 | VDDPLL — PLL supply |
| Chân 126 | VSSPLL — PLL ground |
| Chân 127 | BKPT — Background debug mode request |
| Chân 128 | IFETCH — Instruction fetch / pipe status |
| Chân 129 | IPIPE0 — Instruction pipe status 0 |
| Chân 130 | IPIPE1 — Instruction pipe status 1 |
| Chân 131 | NC — Not connected (per datasheet) |
| Chân 132 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
MC68HC16Z1CEH20-FR phù hợp cho 6 Áp dụngs: Automotive Engine Control Unit (ECU), Industrial Motor and Process Controller, Robotics Motion Controller, Medical Instrumentation and Patient Monitoring, Avionics Subsystem Controller, Building Automation and HVAC Control.
Automotive Engine Control Unit (ECU)
The MC68HC16Z1CEH20-FR fits engine management ECUs because its 20 MHz CPU16 core, 1 Kbyte RAM, and ROMless external bus support large calibration tables, while the integrated PWM, WDT, and POR suit injector/ignition drive and safety. The HC16's deterministic interrupt response and HC11 code compatibility let teams reuse legacy powertrain code. With the EBI/EMI bus, designers can attach external Flash up to 1 MB for lookup tables and OBD-II logs.
Được đề xuất
Industrial Motor and Process Controller
Industrial motor drives and process controllers benefit from the HC16Z1's PWM outputs for closed-loop current/voltage control, SCI for SCADA links, and SPI for sensor/encoder I/O. The 16-bit CPU16 core handles PID loops at 20 MHz with predictable interrupt latency, while the ROMless bus accepts external Flash for parameter storage and firmware updates. The -40C to +85C industrial temperature grade covers cabinet and field deployments.
Được đề xuất
Robotics Motion Controller
Robotics motion controllers leverage the HC16Z1's PWM channels for servo/actuator drive, 16 I/O lines for encoder and limit-switch interfaces, and SCI/SPI for inter-board communication. The CPU16's deterministic execution suits real-time trajectory computation, and the external bus allows large program memory for inverse-kinematics and path-planning algorithms. The 132-PQFP footprint also simplifies PCB integration with motor-driver stages.
Được đề xuất
Medical Instrumentation and Patient Monitoring
Patient monitors and benchtop medical instruments fit the HC16Z1's profile because the 16-bit CPU handles signal preprocessing for ADC data, while SCI/SPI connect to display modules and wireless links. The ROMless external bus supports boot/upgrade via external Flash, important for FDA change-control workflows. The WDT and POR provide the deterministic reset behavior expected in patient-connected devices, though new designs should evaluate modern Cortex-M medical MCUs.
Được đề xuất
Avionics Subsystem Controller
Avionics subsystems (sensor conditioning, actuator drive, panel controllers) historically used the HC16 family because the CPU16's deterministic interrupts and HC11 code reuse matched DO-178 software investment. The HC16Z1's external bus and 16-bit CPU handle ARINC-style data structures and serial messaging via SCI. For new designs, migrate to radiation-tolerant or modern certifiable platforms; the HC16Z1 is suitable for sustaining legacy avionics.
Được đề xuất
Building Automation and HVAC Control
HVAC and building-automation controllers use the HC16Z1's PWM outputs for damper/valve actuators, ADC channels for temperature/flow sensors, and SCI for BACnet/Modbus links to building management systems. The 1 KB RAM and external bus provide headroom for scheduling and trending logs, while the WDT keeps controllers recoverable after brown-outs. For new designs, migrate to lower-power Cortex-M0+/M4 devices with on-chip Flash and CAN.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC68HC16Z1CEH20-FR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC68HC16Z2CEH20 | MC68HC16Z3CEH16 | MC68HC16Z4CEH16 | MC68CM16Z1CEH20 | MC68CK16Z1CEH20 |
|---|---|---|---|---|---|---|
| Package | 132-PQFP (24.13x24.13 mm) | 132-PQFP - same | 132-PQFP - same | 132-PQFP - same | 132-PQFP - same | 132-PQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | CPU16 | CPU16 | CPU16 | CPU16 | CPU16 | CPU16 |
| Core Frequency | 20 MHz | 20 MHz | 16 MHz | 16 MHz | 20 MHz | 20 MHz |
| Program Memory | ROMless | ROMless | ROMless | ROMless | ROMless | ROMless |
| On-Chip RAM | 1 KB | 2 KB | 4 KB | 4 KB | 1 KB | 1 KB |
| Peripherals | POR, PWM, WDT | POR, PWM, WDT, extra timer/QSPI | POR, PWM, WDT, ADC, GPT | POR, PWM, WDT, CAN, ADC | POR, PWM, WDT, enhanced SCI/SPI | POR, PWM, WDT, crypto module |
| Lifecycle Status | Obsolete (NXP discontinuance) | Obsolete (NXP discontinuance) | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Highest core frequency in the HC16Z1 sub-family at this package grade (vsMC68HC16Z3CEH16)
- Broad peripheral set with PWM, WDT, and POR in a single HC16 die (vsMC68CK16Z1CEH20)
- Smallest on-chip RAM footprint reduces cost in memory-rich designs (vsMC68HC16Z2CEH20)
Ghi chú thiết kế
Because the HC16Z1 is ROMless, designers must connect external program memory (typically 27C256 EPROM or 29F040 Flash) to the EBI/EMI bus before the CPU can boot. Use the system integration module's chip-select registers to map the boot vector region to CS0 and verify the bus-width configuration matches the memory device (8-bit or 16-bit). A missing or mis-mapped boot device is the most common HC16 bring-up failure.
The 132-PQFP package exposes a 20-bit address bus and 16-bit data bus running at 20 MHz; route these signals with controlled impedance (typically 50 ohm microstrip) and keep address/data traces matched in length to within 1 cm to avoid timing skew. Place bulk decoupling (10 uF tantalum) and high-frequency bypass (0.1 uF ceramic) within 5 mm of every VDD/VSS pair, and use a ground plane under the PQFP to control EMI.
Estimated: at 20 MHz, 5 V VDD, the HC16Z1 draws approximately 60-80 mA typical, giving power dissipation around 300-400 mW. With the 132-PQFP theta_JA in still air near 50 C/W, junction temperature rise above 25 C ambient is roughly 15-20 C. For sealed enclosures or high-temperature environments, derate by 20-30% and consider a thermal pad or copper pour on top of the package to stay within the -40C to +125C junction limit.
Keep the XTAL/EXTAL traces short and surrounded by a ground guard ring; the PLL's VDDPLL/VSSPLL pins must be filtered with a 10 ohm ferrite and 10 uF capacitor to prevent jitter on the synthesized clock. The XFC pin requires a low-leakage loop filter capacitor (typically 0.01 uF ceramic plus 1.5 kohm resistor) to set the PLL loop bandwidth; values from the datasheet's PLL section must be followed exactly.
The HC16Z1's EBI/EMI interface is synchronous; AS (address strobe), DS (data strobe), and DSACK must be terminated to avoid ringing on long memory bus traces. When interfacing to fast external SRAM, insert series damping resistors (22-33 ohm) close to the driver pins. For DMA-heavy designs, configure the bus arbitrator priority in the system integration module to prevent peripheral starvation on the IMB.
Thông tin tuân thủ
Compliance flags are marked 'unknown' because the verified web data does not state RoHS, REACH, AEC-Q100, lead-free, or halogen-free status explicitly for the MC68HC16Z1CEH20-FR. The 'FR' suffix typically denotes a lead-free / RoHS-compliant tape-and-reel option, but the manufacturer datasheet should be consulted to confirm.
