MC8641VU1500KE557 - PowerPC e600 2-Core 1.5GHz MPU | NXP
MPN: MC8641VU1500KE557 ✗ Cuối đờiMC8641VU1500KE557 Tóm tắt
A microprocessor (MPU) is a single-chip or multi-core central processing unit that fetches, decodes, and executes machine instructions from external memory. Within the broader hierarchy, the MC8641VU1500KE557 sits in the PowerPC e600 family -> Power Architecture microprocessors -> 32-bit embedded MPU -> high-performance computing IC. The MPC86xx series historically targeted routers, switches, RAID controllers, and military/aerospace platforms, providing deterministic performance that contemporary ARM SoCs could not match in the late 2000s.
Key features include dual e600 cores with AltiVec SIMD support, integrated L1 caches per core, a large shared L2 cache, a 64-bit on-chip coherent fabric, integrated DDR2 memory controller, integrated PCI Express and RapidIO serial interfaces, four Gigabit Ethernet MACs, and hardware-assisted SMP coherency. The 1.05 V core supply reduces power consumption while preserving GHz-class throughput.
The architecture combines superscalar out-of-order execution with the AltiVec vector unit, enabling strong performance per MHz on signal-processing workloads. The integrated memory and I/O controllers eliminate the need for a separate northbridge, reducing BOM cost and latency. The platform targets applications where deterministic response and ECC memory integrity matter more than absolute single-thread performance.
Typical applications include high-end enterprise routers and switches, telecom baseband processing, network-attached storage controllers, military/aerospace mission computers, industrial automation controllers, and high-performance imaging systems. Drop-in variants exist at different core counts (single-core vs dual-core), cache sizes, and speed grades.
When designing with this MPU, allocate a minimum of six PCB layers for power/ground integrity, follow NXP's thermal management guidelines for FCCBGA packages, and use ECC memory to maintain data integrity. Layout must respect the BGA escape routing rules; impedance-controlled differential pairs are required for SERDES lanes.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the MC8641VU1500KE557 not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho MC8641VU1500KE557 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MC8641VU1333KE557
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MC8641VU1000KE557
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MPC8641DTHX1500KE
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MC8641VU1500KE557 Tỷ lệ tối đa & tính chất điện
| Series | PowerPC e600 (MPC86xx) |
| Core Processor | PowerPC e600 |
| Core Count | 2 (Dual-Core) |
| Bề rộng đường dữ liệu | 32-Bit |
| Maximum Clock Speed | 1.5 GHz |
| Điện áp cung cấp hoạt động | 1.05 V core |
| Package Type | FCCBGA-1023 (33 x 33 mm) |
| Số chân | 1023 |
| Kiểu lắp đặt | Surface Mount (BGA) |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes (per verified distributor data) |
| Integrated Memory Controller | DDR2 (per MPC86xx family) |
Hướng dẫn cấu hình chân MC8641VU1500KE557 fccbga-1023 (33 x 33 mm)
Cấu hình chân cho MC8641VU1500KE557 (fccbga-1023 (33 x 33 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC8641VU1500KE557.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC8641VU1500KE557 phù hợp cho 6 Áp dụngs: Enterprise Router / Switch Control Plane, Telecom Baseband Processing, Network-Attached Storage (NAS) Controllers, Military / Aerospace Mission Computer, Industrial Automation / Machine Control, High-Performance Imaging / Surveillance.
Enterprise Router / Switch Control Plane
The MC8641VU1500KE557's dual PowerPC e600 cores at 1.5 GHz provide the symmetric multiprocessing throughput required to run control-plane routing protocols such as OSPF and BGP on enterprise-class routers and L2/L3 switches. The integrated DDR2 memory controller with ECC preserves routing-table integrity under sustained load, while the integrated Gigabit Ethernet MACs reduce external chip count. Engineers choose this part for designs that must run legacy firmware stacks without re-validation on newer architectures.
Được đề xuất
Telecom Baseband Processing
In telecom baseband line cards, the MC8641VU1500KE557 handles DSP-like packet-processing tasks using its AltiVec SIMD unit, which can accelerate channel-coding and FEC workloads. The integrated PCI Express and RapidIO SERDES interfaces let the MPU connect to baseband framer ASICs and DSP clusters without external glue logic. Dual-core support allows one core to run the RTOS scheduler while the other handles time-critical PHY interrupts.
Được đề xuất
Network-Attached Storage (NAS) Controllers
The MC8641VU1500KE557 is well suited to mid-range NAS and RAID controllers because the dual e600 cores can split file-system and RAID-engine workloads, while the integrated DDR2 controller with ECC maintains data integrity across drive failures. The hardware-coherent fabric between cores avoids software-cache-coherency overhead in high-IOPS workloads. Compared to newer ARM SoCs, the part offers more deterministic latency under sustained write loads.
Được đề xuất
Military / Aerospace Mission Computer
Defense and aerospace mission computers favor the MC8641VU1500KE557 because PowerPC e600 is a long-lived, deterministic CPU architecture with mature MIL-spec toolchains and ruggedized variants available. The integrated memory controller with ECC and the dual-core coherency fabric support the high-reliability fault-tolerant operating systems common in mission-critical avionics and ground-vehicle computers. Industrial temperature grades are available within the same package for harsh-environment deployments.
Được đề xuất
Industrial Automation / Machine Control
Factory automation controllers and PLCs benefit from the MC8641VU1500KE557's deterministic interrupt response and AltiVec-driven signal-processing throughput, which lets the same MPU run motion-control loops and vision-inspection pre-processing concurrently. The integrated Gigabit Ethernet and SERDES interfaces provide the fieldbus and industrial-Ethernet connectivity required by modern Industry 4.0 designs without external bridge chips.
Được đề xuất
High-Performance Imaging / Surveillance
Surveillance video servers and medical imaging systems leverage the MC8641VU1500KE557's AltiVec SIMD engine to accelerate JPEG/H.264 pre-processing and image-pipeline operations on multiple video streams simultaneously. Dual-core coherency allows one core to handle camera ingestion while the second runs analytics, and the integrated DDR2 ECC controller protects against bit-rot in long-term video archives.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC8641VU1500KE557 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC8641VU1333KE557 | MC8641VU1000KE557 | MPC8641DTHX1500KE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | FCCBGA-1023 (33x33 mm) | FCCBGA-1023 (33x33 mm) | FCCBGA-1023 (33x33 mm) | FCCBGA-1023 (33x33 mm) |
| Core | Dual PowerPC e600 | Dual PowerPC e600 | Dual PowerPC e600 | Dual PowerPC e600 |
| Clock Speed | 1.5 GHz | 1.333 GHz (-11%) | 1.0 GHz (-33%) | 1.5 GHz (identical) |
| Data Bus Width | 32-Bit | 32-Bit | 32-Bit | 32-Bit |
| Core Voltage | 1.05 V | 1.05 V | 1.05 V | 1.05 V |
| Temperature Grade | Commercial (per -KE suffix) | Commercial | Commercial | Industrial (-THX grade) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- 1.5 GHz maximum speed grade in dual-core variant (vsMC8641VU1333KE557)
- Same 1.5 GHz speed at industrial temperature grade (vsMPC8641DTHX1500KE)
- Dual-core e600 vs single-core e600 (vsMC8641VU1500KE (single-core variant))
Ghi chú thiết kế
Estimated: at 1.05 V core and 1.5 GHz dual-core operation, the FCCBGA-1023 power dissipation typically falls in the 15-25 W range per MPC86xx family datasheets. Designers must allocate a minimum 4-layer PCB with continuous ground planes beneath the BGA and follow NXP's thermal-management reference design; junction-temperature monitoring via on-die thermal diode is required for safety-critical deployments.
The 1023-ball FCCBGA at 33x33 mm requires at least a 6-layer PCB with microvia or via-in-pad construction for inner-row ball escape. Maintain 100-ohm differential impedance for SERDES pairs (PCIe, RapidIO) and 50-ohm single-ended for the DDR2 address/command bus. Per NXP hardware-specifications document, place decoupling capacitors on the bottom side directly beneath the BGA footprint within 5 mm of each power pin.
Estimated: because the MC8641VU1500KE557 has been obsolete since approximately 2011, designers frequently encounter counterfeit or remarked parts from unauthorized distributors. Always request lot-traceability documentation, perform incoming x-ray inspection of the BGA balls, and validate against the original Freescale/NXP marking spec. Verify RoHS/REACH compliance for the specific lot rather than relying on the datasheet declaration alone.
Thông tin tuân thủ
RoHS compliance confirmed via JLCPCB and DigiKey third-party distributor data; REACH, halogen-free, and conflict-minerals declarations should be requested from the supplier for the specific lot because the part is obsolete.
