NXP Semiconductors

MC9S08PL8SCTG - 8-Bit 20MHz S08 MCU, 8KB Flash, 16-TSSOP | NXP

MPN: MC9S08PL8SCTG ✓ Hoạt động
2.7 V to 5.5 V Vdss 16-TSSOP Package 20 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

MC9S08PL8SCTG Tóm tắt

The NXP Semiconductors MC9S08PL8SCTG is an 8-bit S08 microcontroller with a 20 MHz core, 8 KB of on-chip flash memory, 1 kB of RAM and 14 general-purpose I/O pins, offered in a 16-pin TSSOP surface-mount package. It runs from a single 2.7 V to 5.5 V supply, making it directly compatible with 3.3 V and 5 V system rails without additional level shifting.

An 8-bit microcontroller is a microprocessor whose internal data path and registers are 8 bits wide. The S08 family from NXP is a cost-optimised 8-bit core with a Harvard-style architecture, a fast 20 MHz clock, on-chip debug support and an instruction set inherited from the long-established HCS08 lineage. In the system hierarchy, an MCU sits below a microprocessor because it integrates flash, RAM, ADC, timers and serial interfaces onto a single die, so one chip can run a complete control loop without supporting glue logic.

Key features of the MC9S08PL8SCTG include a 10-bit successive-approximation ADC, an integrated analog comparator for threshold and zero-cross detection, flexible timer modules for periodic and capture/compare work, and a 14-pin GPIO budget. The NXP S08PLS family is specifically aimed at 5 V cost-sensitive designs and provides strong EFT and ESD robustness, which matters in motor-control and appliance products where cables behave as antennas.

Technically, the device combines 8K x 8 bytes of flash for program storage with 1 kB of RAM for working data. The 20 MHz maximum clock rate gives roughly 10 MIPS of core throughput, enough for proportional control loops, sensor fusion at modest rates, and simple serial protocol handling. Because the ADC shares the same supply reference as the rest of the chip, accuracy depends on clean decoupling of the VDD pins and a stable reference on the analog side of the board.

Typical applications include temperature controllers in appliances, battery-powered sensor nodes with light duty-cycling, small motor and solenoid drivers, LED lighting controllers, and industrial HMI panels that need a handful of buttons, a display interface and a serial link to a host processor. The 16-TSSOP footprint keeps the board area small enough for compact appliances and handheld instruments.

When laying out a design around this part, treat the analog supply and the digital ground return as separate paths, place 100 nF ceramic bypass capacitors on every VDD pin, and route the ADC input away from switching nodes. Because flash program and erase cycles stall the CPU, structure time-critical loops to run from RAM when response time is critical.

This page brings together manufacturer specifications, drop-in alternatives within the S08 family, a parameter-by-parameter comparison and practical layout guidance that the datasheet alone does not present side by side.

Bộ thay thế dễ dàng lắp đặt cho MC9S08PL8SCTG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08PL8SCTG (cùng hình factor và footprint) — khác nhau ở ADC, Mounting Type, Package, Analog Comparator, Interrupt Sources.

NXP Semiconductors
ADC: 10-bit analog-to-digital converter
Mounting Type: Surface Mount
Package: 16-pin TSSOP
So sánh với MC9S08PL8SCTG →
NXP Semiconductors
ADC: 12-channel, 10-bit, 2.5 µs conversion
Mounting Type: Surface Mount
Package: 16-pin TSSOP
So sánh với MC9S08PL8SCTG →
NXP Semiconductors
ADC: 8-channel, 10-bit
Mounting Type: Surface Mount
Package: 16-pin TSSOP
So sánh với MC9S08PL8SCTG →

MC9S08PL8SCT

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
identical 8 KB flash, 1 kB RAM and 20 MHz S08 core; differs in orderable temperature grade and packaging code only

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08SH8CTG

✅ Drop-In
NXP Semiconductors
📦 16-TSSOP
S08 (HCS08) · 8-Bit · 40 MHz · 20 MHz · 8 KB (8K x 8) Flash · 512 B · 2.7 V to 5.5 V · 13

Liên hệ để biết giá

Xem tài liệu →

MC9S08PL4CTG

✅ Drop-In
NXP Semiconductors
📦 16-TSSOP
8-bit S08 Microcontroller (MCU) · 8-bit S08 central processor unit · 20 MHz · 4 KB (4K x 8) · On-chip EEPROM · 512 bytes · 2.7 V to 5.5 V · -40 °C to +85 °C

Liên hệ để biết giá

Xem tài liệu →

MC9S08PL4SCT

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
same 16-TSSOP footprint and S08 core, but 4 KB flash instead of 8 KB (-50% program memory) and lower cost positioning

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08SH4CTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 16-TSSOP
S08 (HCS08) 8-bit CISC · 40 MHz (20 MHz bus) · 4 KB flash · 256 B · 16-pin TSSOP · 2.7 V to 5.5 V · 12-channel, 10-bit, 2.5 µs conversion · Yes

Liên hệ để biết giá

Xem tài liệu →

MC9S08SH1CTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
same 16-TSSOP footprint and serial-rich peripheral set, but flash reduced to 1 KB (-87% program memory), suitable only for minimal code

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08PL8SCTG Tỷ lệ tối đa & tính chất điện

Core / CPU S08, 8-bit
Tần số xung maksimum 20 MHz
Flash Memory Size 8 KB (8K x 8)
SRAM Size 1 kB
ADC Resolution 10 bit
Number of I/O Pins 14
Bề rộng đường dữ liệu 8 bit
Điện áp cung cấp hoạt động 2.7 V to 5.5 V
Nhiệt độ hoạt động -40 C to +85 C
Hộp 16-TSSOP
Kiểu lắp đặt SMD / SMT
Integrated Analog Comparator Yes
Cấp độ độ ẩm nhạy cảm (MSL) 3
Peak Reflow Temperature 260 C
Time At Peak Reflow Temperature 40 s
Trạng thái vòng đời Active

Hướng dẫn cấu hình chân MC9S08PL8SCTG 16-tssop

Cấu hình chân cho MC9S08PL8SCTG (16-tssop gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 16-tssop cho MC9S08PL8SCTG

Không có dữ liệu chân cụ thể sẵn có cho MC9S08PL8SCTG.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MC9S08PL8SCTG phù hợp cho 6 Áp dụngs: Appliance Control Board, Battery-Powered Sensor Node, LED Lighting Controller, Motor and Solenoid Driver, Industrial HMI and Keypad Front Panel, Portable Instrument and Data Logger.

🏭

Appliance Control Board

The MC9S08PL8SCTG suits appliance control boards where a relay, a thermistor and a small display must be coordinated from one low-cost device. Its 10-bit ADC reads the thermistor directly, the analog comparator provides an independent over-temperature trip path that keeps working even if the firmware stalls, and the flexible timer modules generate the zero-cross or PWM drive for the load. Eight kilobytes of flash is ample for a state machine plus a lookup table, and the 2.7 V to 5.5 V operating range accepts either a rectified 5 V rail or a regulated 3.3 V supply. Place the MCU next to the power entry so the supply decoupling is short and the board area stays compact.

🧩

Battery-Powered Sensor Node

For a coin-cell or AA powered sensor node, the MC9S08PL8SCTG offers a 1 kB RAM buffer, 14 available I/O pins and a 2.7 V lower operating limit that matches primary-cell chemistry without a boost stage. Run the core from the lowest internal bus divider that still meets the sampling interval, and wake the part from a periodic timer interrupt so the average current stays dominated by sensor and radio activity rather than the MCU. The 20 MHz ceiling means a short duty-cycled acquisition window is available on wake, and the analog comparator can be used as a low-power threshold detector to avoid running a full ADC conversion on every wake-up cycle.

💡

LED Lighting Controller

An LED lighting controller benefits from the MC9S08PL8SCTG's timer modules, which can generate the PWM dimming waveform and the blanking interval without software bit-banging overhead. The 10-bit ADC lets the product implement constant-current regulation or ambient-light compensation, while the 14 I/O pins drive the LED string enables, mode button and fault indicator. Because the part runs from a single 5 V rail with a 2.7 V floor, it can sit directly behind the bridge rectifier and bulk capacitor of a driver board. Keep the PWM output routed away from the ADC input to avoid coupling dimming ripple into the current-sense measurement.

🔧

Motor and Solenoid Driver

The MC9S08PL8SCTG is a reasonable fit for small motor and solenoid control in appliances and instrumentation, where a full 32-bit MCU would be overkill. The analog comparator detects rotor or valve position without occupying the ADC, and the timer modules provide the periodic current-measurement window used in a simple closed-loop current regulator. The family's documented EFT and ESD robustness is valuable here, since motor wiring acts as an antenna and induced transients are common. Provide bulk decoupling close to the 16-pin TSSOP footprint, and place a flyback path and snubber away from the MCU ground so switching energy does not share the quiet analog return.

📟

Industrial HMI and Keypad Front Panel

For a compact human-machine interface front panel with a keypad, LED indicators and a link to a host controller, the MC9S08PL8SCTG provides enough GPIO and code space in a small footprint. Debounce and key scanning can be handled with the timer interrupt at 20 MHz, and the 8 KB flash budget comfortably holds the scan table, symbol font subset and a simple state machine. The -40 C to +85 C operating range suits industrial panel environments with temperature cycling. Use the Request a Quote form on this page for current availability of the 16-TSSOP variant, and specify whether you need tape-and-reel or tray packing for your assembly process.

🔋

Portable Instrument and Data Logger

Handheld instruments and simple data loggers benefit from the MC9S08PL8SCTG's small TSSOP footprint, wide supply tolerance and low component count. The 1 kB RAM is enough to buffer a block of 10-bit samples before writing to non-volatile storage, and the 20 MHz core leaves headroom for CRC calculation on each record. Because the part operates down to 2.7 V, it can share a battery-derived 3.3 V rail with a radio or sensor module rather than needing its own regulator. Design the layout so the analog sensor input enters the MCU through a dedicated, quiet trace, and keep the flash write regions away from that path to avoid disturbance during program operations.

What is the operating voltage range of MC9S08PL8SCTG?
The MC9S08PL8SCTG operates from 2.7 V to 5.5 V, which covers 3.3 V and 5 V rails in a single part. The NXP product page lists the S08PLS family as a 5 V 8-bit MCU family with strong EFT and ESD performance, so the device fits directly into appliance, industrial control and consumer equipment without level shifters. Keep the supply within the stated range at all times, because brownout behaviour during motor start-up can reset the core and corrupt flash writes in progress.
How much flash and RAM does the MC9S08PL8SCTG have?
The MC9S08PL8SCTG provides 8 KB of program flash organised as 8K x 8 bytes plus 1 kB of RAM for working data. According to the distributor listing for this MPN, the part is described as an S08 microcontroller with 8KB (8K x 8) FLASH. With roughly 10 MIPS of core throughput at the 20 MHz maximum clock, that flash budget is comfortable for structured control firmware rather than for large protocol stacks or graphics buffers.
What is the maximum clock frequency of the MC9S08PL8SCTG?
The MC9S08PL8SCTG runs at a maximum clock frequency of 20 MHz. At that rate the S08 core executes roughly 10 million instruction cycles per second, which supports proportional control loops, periodic timer interrupts and light serial data handling. The 20 MHz figure is the family maximum for the 5 V S08PLS devices; use a lower internal bus divider if your timing budget allows it, since a lower bus divider reduces switching current in battery-powered designs.
What ADC does the MC9S08PL8SCTG integrate?
The MC9S08PL8SCTG integrates a 10-bit successive-approximation ADC together with an analog comparator. The 10-bit resolution matches the published specification for this device and gives roughly 1024 code levels across the selected reference range. The separate analog comparator is useful for fast threshold detection, such as zero-crossing on a mains-derived signal or a battery-voltage trip point, without waiting for a full conversion cycle to complete.
Where can I buy MC9S08PL8SCTG online?
The MC9S08PL8SCTG can be ordered directly through the Request a Quote form on this page. The NXP manufacturer page lists the device as Active with buy options, and multiple authorised channels carry the 16-TSSOP variant. Submit the quote form with your target quantity and reel or tray packaging preference, and the sourcing team will confirm stock, lead time and unit pricing for the exact MPN and suffix.
What is the lead time for MC9S08PL8SCTG?
Lead time for the MC9S08PL8SCTG depends on the quantity and packaging you request. The manufacturer lists the part as Active, so it is in ongoing production rather than being in last-time-buy or obsolete status. Use the Request a Quote form on this page and state your required quantity, date code needs and whether you need tape-and-reel or tray packing, and the sourcing team will confirm the current factory lead time in writing before you place the order.
What is the price of MC9S08PL8SCTG?
Current unit pricing for the MC9S08PL8SCTG is confirmed through the Request a Quote form on this page rather than a static table, because volume, date code and packaging change the number. The part is a catalogue, in-production 8-bit MCU with published distribution across several channels, so it is not a hard-to-source device. Submit the quote request with your anticipated annual and per-lot quantities to get a current, comparable price structure.
Is MC9S08PL8SCTG in stock?
Stock status for the MC9S08PL8SCTG is checked against live channel inventory when you submit the Request a Quote form on this page. The manufacturer lists the device as Active, and multiple channels carry the exact 16-TSSOP part number, so the device is in normal production distribution. Include your required delivery date and packaging format in the request so the sourcing team can confirm the quantity that can be allocated to your shipment.
MC9S08PL8SCTG vs MC9S08SH8CTG - which is better for a new design?
The MC9S08SH8CTG is the better choice when your design needs on-board serial communication; the MC9S08PL8SCTG is the lower-cost choice for simple standalone control. Both are 8-bit S08 parts with 8 KB of flash in a 16-pin TSSOP, but the SH8CTG adds SCI, SPI and I2C interfaces plus an on-chip temperature sensor, while the PL8SCTG concentrates on timers, ADC and comparator for cost-driven designs with minimal serial traffic.
What is the difference between MC9S08PL8SCTG and MC9S08PL4CTG?
The MC9S08PL8SCTG carries 8 KB of flash while the MC9S08PL4CTG carries 4 KB, and both sit in the 16-pin TSSOP footprint with the same S08 core and 20 MHz clock. The PL4CTG therefore costs less and is the right choice for simple sequencing or discrete logic replacement, while the PL8SCTG gives you room for more application logic, look-up tables or bootloader code. The RAM budget and peripheral mix differ between them, so verify both against your memory map before swapping.
When should I choose MC9S08PL8SCTG over MC9S08PL4CTG?
Choose the MC9S08PL8SCTG when firmware size, bootloader space or data-lookup requirements push past a 4 KB program budget, or when you want one part number across a product family with different feature tiers. Stay with the MC9S08PL4CTG when the application code fits comfortably inside 4 KB and cost is the dominant constraint. Because the two are pin compatible in the same 16-TSSOP footprint, the decision is a firmware and BOM decision rather than a layout decision.
What is the best drop-in replacement for MC9S08PL8SCTG?
The closest drop-in replacement is the MC9S08PL8SCT, which carries the same 8 KB flash, 1 kB RAM, 10-bit ADC and 14 I/O in the same 16-pin TSSOP outline, differing mainly in temperature grade and orderable variants. If you need more serial connectivity, the MC9S08SH8CTG is a pin-compatible alternative with SCI, SPI and I2C added. Confirm the exact pin functions and peripheral set in the datasheet before treating any of these as a substitution.
What can replace MC9S08PL8SCTG?
Pin-compatible replacements for the MC9S08PL8SCTG come from the NXP S08 8-bit family in the 16-pin TSSOP package, chiefly the MC9S08PL8SCT, MC9S08SH8CTG, MC9S08PL4CTG, MC9S08SH4CTG and MC9S08SH1CTG. No other manufacturer's 8-bit MCU is a genuine drop-in for this device, because the S08 core, its debug interface and its timer layout are not replicated elsewhere. If you need a second source across vendors, plan for a board respin instead of a footprint-compatible swap.
Where to download the MC9S08PL8SCTG datasheet PDF?
The MC9S08PL8SCTG datasheet is available from the NXP product page for this part number, which links the device data sheet and supporting documents for the S08PLS family. Use the manufacturer PDF rather than a distributor mirror, since the NXP document includes the pin description table, electrical characteristics, memory map and recommended application circuits. The family data sheet covers both the 4 KB and 8 KB flash variants of the PL series.
Where can I find the MC9S08PL8SCTG pinout?
The MC9S08PL8SCTG pinout is documented in the pin description table of the NXP S08PLS family data sheet, which lists all 16 TSSOP terminals including VDD, VSS, RESET, the port pins and the analog inputs. Because the pin functions are shared with the rest of the S08 family, the pin connection diagram can be reused for the PL4 and SH variants in the same package. Assign PCB tracks from that table, and treat any unassigned or reserved terminals as not connected.
What are the key specifications of MC9S08PL8SCTG that engineers should know?
The MC9S08PL8SCTG is an 8-bit S08 microcontroller rated at 20 MHz with 8 KB of flash, 1 kB of RAM, a 10-bit ADC, an analog comparator, 14 I/O pins, a 2.7 V to 5.5 V supply range, an operating range of -40 C to +85 C, and a 16-pin TSSOP package. The NXP product page lists the device as Active, and the family is specified for 5 V operation with strong EFT and ESD robustness for appliance and industrial control use.

Dữ liệu tham khảo kỹ thuật cho MC9S08PL8SCTG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MC9S08PL8SCTG when you need a single low-cost 8-bit controller for a 5 V appliance, instrument or sensor node with up to eight kilobytes of firmware, a 10-bit ADC, an analog comparator and roughly fourteen I/O pins. Stay with the MC9S08PL4CTG when the application code clearly fits in 4 KB and cost dominates; the footprint and toolchain are identical, so only the firmware budget changes. Move to the MC9S08SH8CTG when the design must talk to a host over SCI, SPI or I2C, or benefits from the on-chip temperature sensor. Use the MC9S08SH1CTG only for very small utility firmware. No cross-vendor 8-bit MCU is a genuine drop-in for this footprint, so a second source across manufacturers means a board respin rather than a simple substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MC9S08PL8SCT MC9S08SH8CTG MC9S08PL4CTG MC9S08SH4CTG
Package 16-TSSOP 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Flash Memory 8 KB (8K x 8) 8 KB 8 KB 4 KB 4 KB
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
ADC Resolution 10 bit 10 bit 10 bit 10 bit 10 bit
Number of I/O Pins 14 14 14 14 14
Operating Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Operating Temperature -40 C to +85 C -40 C to +85 C -40 C to +85 C -40 C to +85 C -40 C to +85 C

Bảo phân biệt quan trọng

  • Largest program memory in the pin-compatible 16-TSSOP set (vsMC9S08PL4CTG)
  • Cost-oriented peripheral mix without serial overhead (vsMC9S08SH8CTG)
  • Second-source friendly within the S08 footprint (vsMC9S08PL8SCT)

Ghi chú thiết kế

The MC9S08PL8SCTG accepts a single 2.7 V to 5.5 V supply, so tie every VDD terminal to the same rail and place a 100 nF ceramic bypass capacitor as close as possible to each supply pin, with the ground return taken from the capacitor rather than from a distant plane point. If the board also carries a motor, relay or display backlight, keep that load on a separate branch with its own bulk capacitance so brownout on the high-current path does not trip a reset on the MCU. Brownout during a flash write is the classic cause of corrupted configuration data in appliance boards.

Route the analog input and the comparator sense line as a short trace directly to the MCU pin, with a return path alongside it on the ground plane, and keep switching-node copper (MOSFET drains, relay contacts, LED anode paths) on the opposite side of the board. Do not run analog traces under the TSSOP footprint, and avoid placing the 16-TSSOP near the board edge where cable or transformer leakage couples in. Grounding the exposed analog reference cleanly and filtering the supply with a ferrite bead plus bulk capacitance typically buys more usable ADC accuracy than any software averaging.

Two errors dominate S08 designs. First, flash program and erase cycles block the CPU, so any control loop with a tight response window must run from RAM during that interval. Second, the part is only specified to 5.5 V maximum supply; connecting an unregulated 12 V or 24 V rail directly to a VDD pin destroys the device. Use the resistor divider and comparator inputs for over-voltage detection rather than a rail that exceeds the absolute maximum, and confirm the pin assignment of any comparator input from the family data sheet before assuming the default port mapping.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The NXP product page lists MC9S08PL8SCTG as Active. Reflow handling per the component listing: MSL 3, peak reflow temperature 260 C for up to 40 s. RoHS, REACH and halogen-free declarations are not stated on the sources reviewed, so they are recorded as unknown; confirm with the manufacturer declaration before release to market.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MC9S08PL8SCTG MC9S08PL8SCTG datasheet MC9S08PL8SCTG datasheet pdf MC9S08PL8SCTG pinout MC9S08PL8SCTG equivalent MC9S08PL8SCTG replacement MC9S08PL8SCTG price MC9S08PL8SCTG stock NXP MC9S08PL8SCTG MC9S08PL8SCTG vs MC9S08SH8CTG MC9S08PL8SCTG 16-TSSOP footprint MC9S08PL8SCTG 8-bit 20MHz MCU MC9S08PL8SCTG application circuit MC9S08PL8SCTG lead time

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors MC9S08PL8SCTG MC9S08PL8SCT MC9S08SH8CTG MC9S08PL4CTG MC9S08PL4SCT MC9S08SH4CTG MC9S08SH1CTG S08 core 8-bit microcontroller MCU HCS08 16-TSSOP TSSOP package family surface mount 10-bit ADC successive approximation ADC analog comparator PWM timer SCI SPI I2C EEPROM EFT immunity ESD robustness Moisture Sensitivity Level 3 RoHS REACH
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ