NXP Semiconductors

MC9S12D64VPV - 16-Bit 64KB Flash MCU | NXP | Automotive

MPN: MC9S12D64VPV ✓ Hoạt động
2.35 V to 5.25 V Vdss LQFP-112, gull-wing terminal Package 25 MHz Speed 64 KB Memory
MOQ: 1 |

MC9S12D64VPV Tóm tắt

The NXP Semiconductors MC9S12D64VPV is a 16-bit HCS12 automotive multiplexing microcontroller with 64KB of flash memory, 4KB of RAM, 1KB of EEPROM, and a 25MHz operating frequency, supplied in a 112-terminal LQFP package. Its operating voltage is 2.35V to 5.25V, while the industrial temperature range extends from -40°C to +105°C. These headline characteristics position the device for embedded automotive, industrial, and communications designs requiring deterministic 16-bit control with integrated flash and EEPROM memory.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one component. The MC9S12D64 belongs to the HCS12 family, whose 16-bit architecture, mixed-signal peripherals, and automotive-oriented interfaces support applications that need more control capability than a basic 8-bit device. The S12D family also provides an upward migration path from earlier 68HC08, 68HC11, and 68HC12 architectures by combining greater memory, additional peripherals, and higher performance.

The MC9S12D64VPV integrates 64KB of flash program memory, 4KB of RAM, and 1KB of EEPROM into a single package. Its 10-bit ADC resources and 25MHz maximum clock support mixed-signal control systems where sensor acquisition, communications, and real-time control coexist. The broad 2.35V to 5.25V operating range permits design flexibility across automotive and industrial voltage environments, while the -40°C to +105°C rating supports operation across extended temperature conditions.

Within the S12D family, devices are designed with package and peripheral compatibility to support scalable platform development. The family documentation describes fully pin-compatible members with selectable memory and peripheral options, allowing a common hardware concept to move between configurations as requirements change. The MC9S12D64VPV uses a square 20mm by 20mm LQFP-112 package with gull-wing terminals, providing a high pin count for analog interfaces, communication channels, timers, and control signals.

Typical applications include automotive body and multiplexing controllers, sensor-interface modules, industrial acquisition equipment, communication nodes, and embedded control platforms. Its 16-bit processing core is useful for algorithms requiring more arithmetic range than an 8-bit microcontroller, while the integrated ADC supports direct analog measurement. Designers should also consider the comparatively high 25MHz clock when evaluating timing margins, power consumption, and peripheral clock requirements.

PCB implementation requires careful attention to the 112-terminal LQFP footprint, exposed supply routing, decoupling, and signal integrity. Place input and output decoupling capacitors close to the appropriate supply terminals, use a continuous ground plane, and route high-frequency or communication signals away from switching nodes. Firmware, clock, reset, and power-management configuration must be checked against the device user guide before production release.

This product page combines the manufacturer-family identity, verified package and memory characteristics, practical automotive and industrial use cases, package-aware comparison information, and design guidance. It is intended to help engineers locate the official MC9S12D64VPV documentation, understand the device's architectural limits, and determine whether a pin-compatible S12D family device is appropriate for an existing design.

Bộ thay thế dễ dàng lắp đặt cho MC9S12D64VPV — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MC9S12DG256CPVE

✅ Drop-In
📦 LQFP-112
Flash increases from 64KB to 256KB (+300%), RAM increases from 4KB to 12KB (+200%), while the 112-terminal LQFP format and 25MHz core class remain the same.

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S12D64VPV Tỷ lệ tối đa & tính chất điện

Microcontroller Type 16-bit HCS12 microcontroller
Architecture 16-bit CISC
Tần số xung maksimum 25 MHz
Flash Memory 64 KB
RAM 4 KB
EEPROM 1 KB
ADC Resolution 10 bit
Operating Voltage Range 2.35 V to 5.25 V
Khoảng nhiệt độ hoạt động -40°C to +105°C
Temperature Grade Industrial
Package Type LQFP-112, gull-wing terminal
Package Body Size 20 mm × 20 mm
Package Shape Square
Terminal Count 112 terminals
Core Family HCS12
Family Design Flash-based 16-bit MCU for automotive multiplexing applications
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MC9S12D64VPV square

Cấu hình chân cho MC9S12D64VPV (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân square cho MC9S12D64VPV

Không có dữ liệu chân cụ thể sẵn có cho MC9S12D64VPV.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MC9S12D64VPV phù hợp cho 6 Áp dụngs: Automotive Body Multiplexing Controller, Automotive Sensor Interface Module, Industrial Data Acquisition Controller, Industrial Communication Node, Embedded Motor and Actuator Control, Programmable Logic Controller.

🚗

Automotive Body Multiplexing Controller

The MC9S12D64VPV fits automotive body and multiplexing controllers because it combines a 16-bit HCS12 core, 25MHz clock, and integrated flash, RAM, and EEPROM in one device. Its 2.35V to 5.25V operating range and -40°C to +105°C temperature specification support extended-temperature embedded systems. The 112-terminal LQFP exposes the interfaces needed for distributed body nodes, switches, sensors, and diagnostic signaling. Compared with a simple 8-bit controller, the 16-bit architecture provides greater arithmetic and addressing capability, although designers should confirm AEC-Q100 qualification for the exact production program.

🧩

Automotive Sensor Interface Module

The MC9S12D64VPV is suitable for an automotive sensor interface because it includes a 10-bit ADC, 4KB of RAM, 1KB of EEPROM, and 25MHz processing performance. The MCU can sample analog inputs, apply calibration or filtering, and manage associated communication and control functions within a compact embedded platform. Its -40°C to +105°C rating is appropriate for many vehicle-cabin and exterior sensing environments, while the 112-terminal package provides substantial I/O capacity. Validate analog accuracy, channel multiplexing, and qualification requirements in the family documentation before deployment.

🏭

Industrial Data Acquisition Controller

The MC9S12D64VPV can serve as an industrial acquisition controller when a design requires deterministic 16-bit processing alongside a 10-bit ADC. Its 25MHz clock supports time-based sampling and control tasks, while 64KB of flash, 4KB of RAM, and 1KB of EEPROM support firmware, working state, and parameter storage. The device operates from 2.35V to 5.25V across -40°C to +105°C, making it suitable for robust equipment environments. Engineers should budget external signal conditioning, isolation, precision references, and protection where sensor inputs exceed the MCU's direct interface limits.

🌐

Industrial Communication Node

The MC9S12D64VPV is appropriate for a communication node that needs more capability than an 8-bit MCU while retaining a modest embedded memory footprint. Its 16-bit HCS12 architecture, 25MHz maximum clock, and 64KB flash can support protocol processing, local diagnostics, and application logic. The LQFP-112 package provides numerous signal options for communications and control functions, and the 2.35V to 5.25V supply range supports embedded industrial rails. Pin multiplexing, timing, transceiver requirements, and interrupt latency should be verified against the device user guide for the selected peripheral set.

🔧

Embedded Motor and Actuator Control

The MC9S12D64VPV can coordinate actuators in motor, valve, and pump control subsystems where 16-bit arithmetic, real-time timers, analog feedback, and communication are required. The 25MHz core and 64KB flash provide room for control algorithms and diagnostics, while 4KB of RAM supports working state. Its 112-terminal LQFP package offers ample external connections for control outputs and feedback inputs. The main engineering trade-off is that software must manage timing, debouncing, fault handling, and protection consistently with the power stage and the MCU's specified operating limits.

⚡

Programmable Logic Controller

The MC9S12D64VPV is well suited to compact PLC-style controllers because it combines flash-resident application code, EEPROM for configuration or calibration values, RAM for runtime state, and a 16-bit real-time core. Its 10-bit ADC supports basic analog process inputs, while 25MHz operation provides timing margin for scanning and control tasks. The industrial temperature range of -40°C to +105°C supports harsh installations, and the LQFP-112 package provides extensive I/O options. Production designs should include watchdog handling, brownout behavior, isolation strategy, and validated I/O protection.

Tóm tắt các sản phẩm được đề xuất

MC9S12D64 Base device designation for the MC9S12D64 family Được sử dụng trong: Automotive Body Multiplexing Controller, Automotive Sensor Interface Module, Industrial Data Acquisition Controller, Industrial Communication Node, Embedded Motor and Actuator Control, Programmable Logic Controller MC9S12DJ64 Device family covered by the MC9S12DJ64 user guide Được sử dụng trong: Automotive Body Multiplexing Controller, Automotive Sensor Interface Module, Industrial Data Acquisition Controller, Industrial Communication Node, Embedded Motor and Actuator Control, Programmable Logic Controller
What is the MC9S12D64VPV?
The MC9S12D64VPV is a 16-bit HCS12 flash-based microcontroller from NXP Semiconductors, originally developed by Motorola. It operates up to 25MHz and integrates 64KB of flash, 4KB of RAM, and 1KB of EEPROM in a 112-terminal LQFP package. According to the MC9S12DJ64 Device User Guide V01.20 and MC9S12D64 family documentation, the part targets automotive multiplexing applications and provides an upward migration path from earlier 68HC08, 68HC11, and 68HC12 designs.
What are the key specifications of MC9S12D64VPV that engineers should know?
The MC9S12D64VPV combines a 16-bit CISC core, a 25MHz maximum clock, 64KB of flash, 4KB of RAM, 1KB of EEPROM, and 10-bit ADC capability. Its supply range is 2.35V to 5.25V, and its industrial temperature rating spans -40°C to +105°C. The device is packaged as a square 20mm by 20mm LQFP-112 with gull-wing terminals. These characteristics make it suitable for embedded automotive multiplexing, sensor acquisition, communications, and real-time industrial control.
Where can I download the MC9S12D64VPV datasheet PDF?
The MC9S12D64VPV datasheet and device documentation can be obtained from the datasheet listing linked on this page and from the MC9S12D64 family documentation. The associated user guide is identified as MC9S12DJ64 Device User Guide V01.20. Use the device user guide for detailed registers, interrupt behavior, clocking, memory maps, and peripheral operation, and use the family data sheet for package, ordering, and electrical characteristics.
Where is the MC9S12D64VPV pinout located?
The MC9S12D64VPV pinout is shown in the pin-description and package-drawing sections of the MC9S12D64 family documentation and MC9S12DJ64 Device User Guide V01.20. The component uses a square 20mm by 20mm LQFP-112 package with 112 gull-wing terminals. Use the manufacturer package drawing when assigning PCB nets because terminal numbering, power connections, analog inputs, and alternate-function mappings must follow that document exactly.
What is the operating voltage range of the MC9S12D64VPV?
The MC9S12D64VPV operates from 2.35V to 5.25V. This range supports designs operating from a regulated 3.3V rail as well as automotive systems that include 5V-compatible interfaces. Power sequencing, input-voltage transients, and individual peripheral operating constraints still require review against the family documentation; the range does not imply that every external interface can tolerate an unrestricted automotive battery waveform.
Is MC9S12D64VPV suitable for automotive applications?
The MC9S12D64VPV is explicitly positioned for automotive multiplexing applications by the MC9S12D64 family documentation, and it is specified over -40°C to +105°C with a 2.35V to 5.25V operating range. Its 16-bit core, 64KB flash, 4KB RAM, 1KB EEPROM, and 10-bit ADC support embedded automotive control and sensing. Confirm AEC-Q100 qualification and individual automotive qualification requirements before using the device in a safety- or production-critical program.
What is the difference between MC9S12D64VPV and MC9S12DG256CPVE?
The MC9S12DG256CPVE provides 256KB of flash and 12KB of RAM, compared with 64KB of flash and 4KB of RAM in the MC9S12D64VPV. Both are listed as 16-bit, 25MHz S12D-family devices in 112-terminal LQFP packages, and both support a 2.5V or 5V automotive-oriented configuration. The DG256CPVE therefore offers four times the flash and three times the RAM while maintaining the same package and core-clock class.
When should I choose MC9S12D64VPV over MC9S12DG256CPVE?
Choose the MC9S12D64VPV when 64KB of flash and 4KB of RAM are sufficient and lower memory demand simplifies firmware, validation, or resource planning. Choose the MC9S12DG256CPVE when the application needs substantially more code and working memory for larger protocols, diagnostics, logging, or complex control functions. Both retain the 112-terminal LQFP format and 25MHz S12D architecture, but firmware capacity and application requirements determine which device provides the better fit.
Is the MC9S12D64VPV the same as the MC9S12DG256CPVE?
No, the MC9S12D64VPV and MC9S12DG256CPVE are not electrically identical, although they share the S12D family, 16-bit architecture, 25MHz clock class, and 112-terminal LQFP format. The MC9S12D64VPV has 64KB of flash and 4KB of RAM, while the MC9S12DG256CPVE has 256KB of flash and 12KB of RAM. Pin-level substitution therefore requires checking the family compatibility information and firmware resource assumptions.
What can replace the MC9S12D64VPV?
The MC9S12DG256CPVE is the closest identified package-compatible S12D-family option because it uses a 112-terminal LQFP and operates at 25MHz. It increases flash from 64KB to 256KB and RAM from 4KB to 12KB. Confirm pin, voltage, peripheral, clock, reset, and software compatibility in the manufacturer documentation before treating it as a drop-in replacement, and request availability and lead time through the Request a Quote form on this page.
What is the best NXP Semiconductors equivalent for MC9S12D64VPV?
The MC9S12DG256CPVE is the identified NXP Semiconductors equivalent for package-level migration from the MC9S12D64VPV. Both use a 112-terminal LQFP and a 25MHz S12D core, but the alternative increases flash to 256KB and RAM to 12KB. It is therefore most appropriate when the existing PCB can be retained and the additional memory is acceptable. Validate all peripheral assignments and software constraints before production substitution.
How much power and heat does MC9S12D64VPV generate?
The MC9S12D64VPV power consumption depends on supply voltage, clock rate, active peripherals, I/O loading, and ambient temperature, so it cannot be reduced to one universal dissipation value. Use the electrical characteristics and operating modes in the MC9S12D64 family documentation. Estimated: P = VIN × ICORE plus peripheral and I/O loading, and junction rise can be estimated with P × thermal resistance under the specified PCB conditions. Confirm both calculations against the manufacturer limits.
Where can I buy MC9S12D64VPV and what is its lead time?
Use the Request a Quote form on this page to request MC9S12D64VPV pricing, current stock, minimum order quantity, and production lead time. Quote requests allow the required quantity, package, and delivery schedule to be reviewed against current channel inventory. The public listing identifies the MC9S12D64VPV as in stock, but availability can change quickly; request the current quantity and confirmed lead time before committing a schedule.
Is MC9S12D64VPV currently in stock?
The current product listing identifies the MC9S12D64VPV as in stock, but stock levels and lead times can change without notice. Use the Request a Quote form on this page for the latest quantity, packaging, and delivery information. For production planning, request a firm lead time against your required order quantity and specify whether the complete shipment must be scheduled at once.
What is the price of MC9S12D64VPV?
MC9S12D64VPV pricing depends on quantity, package, and current channel availability. Use the Request a Quote form on this page to request current pricing for the required quantity and an updated availability confirmation. The platform can present the resulting quotation through its normal fulfillment workflow, allowing price and lead time to be reviewed together before an order is placed.
Does MC9S12D64VPV meet RoHS and AEC-Q100 requirements?
The MC9S12D64VPV is identified as an industrial-grade automotive-oriented 16-bit microcontroller, but RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation from the manufacturer or the current product documentation. Use the Request a Quote form on this page to request the applicable compliance and qualification documents for the exact ordering code. Do not infer automotive qualification solely from the application's operating temperature range.

Dữ liệu tham khảo kỹ thuật cho MC9S12D64VPV — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MC9S12D64VPV when a 16-bit automotive-oriented control system can operate within 64KB of flash, 4KB of RAM, and 1KB of EEPROM and requires an industrial -40°C to +105°C temperature range. Its 25MHz HCS12 core, 10-bit ADC, and 112-terminal LQFP make it appropriate for multiplexing nodes, acquisition modules, communication equipment, and compact industrial controllers. Choose the MC9S12DG256CPVE when the same 112-terminal package and 25MHz architecture are desired but substantially more code and working memory are required. It provides 256KB of flash and 12KB of RAM. Before substitution, verify ADC resources, peripheral assignments, pin multiplexing, voltage details, qualification, software support, and package tolerances against the manufacturer documentation.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MC9S12DG256CPVE
Brand NXP Semiconductors NXP Semiconductors
Package LQFP-112, 20mm × 20mm LQFP-112
Core Architecture 16-bit HCS12 CISC 16-bit HCS12 CISC
Maximum Clock Frequency 25 MHz 25 MHz
Flash Memory 64 KB 256 KB (+300%)
RAM 4 KB 12 KB (+200%)
Operating Voltage Range 2.35 V to 5.25 V 2.5 V / 5 V automotive configuration
Terminal Count 112 terminals 112 terminals

Bảo phân biệt quan trọng

  • Lower memory configuration for cost-sensitive embedded control (vsMC9S12DG256CPVE)
  • Same package and core-clock migration path (vsMC9S12DG256CPVE)
  • Documented 10-bit conversion capability (vsMC9S12DG256CPVE)

Ghi chú thiết kế

Design the board around the manufacturer's 112-terminal LQFP land pattern and preserve pin numbering from the package drawing. Place every required supply bypass capacitor close to its corresponding power terminal, connect the device ground pins to a continuous ground plane, and avoid routing communication or ADC signals beneath noisy supply paths. Confirm exposed thermal requirements and recommended PCB construction in the package documentation before release.

Use separate local paths for digital and analog supply distribution when sensitive ADC measurements are required, then join them at a controlled ground reference. Select bypass capacitors and their voltage ratings according to the electrical-characteristics guidance. Transient protection must be designed for the actual automotive or industrial environment rather than inferred solely from the 2.35V to 5.25V operating range.

Do not assume that equal package dimensions guarantee a functional drop-in replacement. Compare pin multiplexing, power pins, reset and clock functions, peripheral resources, memory-map assumptions, and software support between the MC9S12D64VPV and the selected alternative. The MC9S12DG256CPVE shares the LQFP-112 package and 25MHz core class, but its larger memory configuration requires a firmware and validation review.

Assign ADC channels, communication interfaces, timers, and debug signals from the manufacturer pin-description table before laying out the PCB. Keep analog inputs away from switching-power nodes and provide a low-impedance reference return. If the MCU processes captured waveforms, verify the required ADC acquisition rate and peripheral timing against the 25MHz system clock rather than inferring performance from clock frequency alone.

Estimated: power dissipation is P = VIN × ICORE plus the power consumed by active peripherals and I/O loads. The resulting junction-temperature estimate is TJ = TA + P × thermal resistance, using the manufacturer thermal model and the intended PCB copper area. Validate worst-case activity, supply voltage, and ambient temperature because the operating-temperature range alone does not establish safe board-level dissipation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The device is described for automotive multiplexing applications and has an industrial temperature range, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is included in the available product information. Request current compliance documents for the exact ordering code through the Request a Quote form.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MC9S12D64VPV datasheet MC9S12D64VPV specifications MC9S12D64VPV pinout MC9S12D64VPV datasheet pdf NXP MC9S12D64VPV MC9S12D64VPV equivalent MC9S12D64VPV replacement MC9S12D64VPV cross reference MC9S12D64VPV price MC9S12D64VPV stock MC9S12D64VPV LQFP-112 MC9S12D64VPV automotive microcontroller MC9S12D64VPV vs MC9S12DG256CPVE

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors Motorola MC9S12D64VPV MC9S12D64 MC9S12DJ64 MC9S12DG256CPVE HCS12 S12D 16-bit microcontroller CISC embedded microcontroller automotive multiplexing controller industrial acquisition controller 64 KB flash memory 4 KB RAM 1 KB EEPROM 10-bit ADC 25 MHz 2.35 V to 5.25 V LQFP-112 gull-wing package surface mount pin-compatible S12D device MC9S12DJ64 Device User Guide V01.20
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ