MC9S12XDG128MAA - 16-bit HCS12X MCU, 128KB Flash, 80MHz, 80-QFP | NXP
MPN: MC9S12XDG128MAA ✗ Cuối đờiMC9S12XDG128MAA Tóm tắt
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces (CAN, SPI, SCI, I2C), and GPIO. The HCS12X architecture from Freescale (now NXP) is a 16-bit CISC core that is upward-compatible with the legacy HC12/HCS12 instruction set, with enhancements including an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HCS12 programmer's model. The X-variant adds a peripheral co-processor (XGATE) for offloading interrupt-driven tasks.
Key features include 128KB (128K x 8) of in-application programmable Flash, 12KB of RAM, an Enhanced Capture Timer (ECT), an 8-channel 10-bit ADC, multiple CAN 2.0 modules (msCAN), J1850/SCI/SPI interfaces, and an integrated voltage regulator for single 5V or 3.3V operation. The device supports background debug mode (BDM) and single-wire debug, simplifying in-circuit development and field updates.
The S12XD architecture uses a unified memory map with Flash, RAM, and EEPROM in a single address space, and includes a Memory Protection Unit (MPU) and ECC on the Flash array. The XGATE co-processor can execute data-movement and peripheral-handling routines independently, freeing the main CPU for control-loop tasks. The 80-QFP (MAA suffix) package provides 80 general-purpose I/O lines with 5V tolerant inputs.
Typical applications include automotive body and chassis ECUs, industrial CAN node controllers, building automation gateways, motor control (BLDC/PMSM) with CAN, and sensor-fusion nodes. Designers often pair the XGATE with an msCAN handler to achieve deterministic bus latency below 50 microseconds. Per the NXP product page, this part is flagged as End of Life and is not recommended for new designs - choose S12XEP or S12XET active variants for new programs.
Bộ thay thế dễ dàng lắp đặt cho MC9S12XDG128MAA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S12XDG128MAA (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package.
MC9S12XDG128CAA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S12XDT512MAA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S12XDG128MAA Tỷ lệ tối đa & tính chất điện
| Core Architecture | HCS12X (16-bit CISC, enhanced) |
| CPU Core | S12X with XGATE co-processor |
| Maximum CPU Frequency | 80 MHz (40 MHz bus) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM | 12 KB |
| Operating Voltage | 2.5 V or 5 V (single supply with internal regulator) |
| Hộp | 80-pin QFP (14 x 14 mm), MAA suffix |
| Kiểu lắp đặt | Surface Mount |
| Communication Interfaces | CAN, SCI, SPI, I2C, J1850 |
| Nhiệt độ hoạt động | -40C to +125C (industrial / automotive grade) |
| Trạng thái RoHS | Compliant |
| Background Debug Mode | Yes (BDM, single-wire) |
| Instruction Set Compatibility | Upward-compatible with HCS12, instruction queue, enhanced indexed addressing |
Cấu hình chân MC9S12XDG128MAA
| Chân 1 | BKGD — Background Debug Mode pin |
| Chân 2 | VDDR — Voltage regulator supply |
| Chân 3 | VDD — Digital supply voltage |
| Chân 4 | VSS — Digital ground |
| Chân 5 | RESET — External reset input, active low |
| Chân 6 | XTAL — Crystal oscillator input |
| Chân 7 | EXTAL — Crystal oscillator input |
| Chân 8 | VSSXOSC — Crystal oscillator ground |
| Chân 9 | TEST — Test mode pin (must be tied to VSS in normal operation) |
| Chân 10 | PE0/XIRQ — Port E bit 0 / non-maskable interrupt |
| Chân 11 | PE1/IRQ — Port E bit 1 / maskable interrupt |
| Chân 12 | PE2 — Port E bit 2 |
| Chân 13 | PE3 — Port E bit 3 |
| Chân 14 | PE4 — Port E bit 4 |
| Chân 15 | PE5 — Port E bit 5 |
| Chân 16 | PE6 — Port E bit 6 |
| Chân 17 | PE7 — Port E bit 7 |
| Chân 18 | PAD00/AN00 — Port AD bit 0 / ADC channel 0 |
| Chân 19 | PAD01/AN01 — Port AD bit 1 / ADC channel 1 |
| Chân 20 | PAD02/AN02 — Port AD bit 2 / ADC channel 2 |
| Chân 21 | PAD03/AN03 — Port AD bit 3 / ADC channel 3 |
| Chân 22 | PAD04/AN04 — Port AD bit 4 / ADC channel 4 |
| Chân 23 | PAD05/AN05 — Port AD bit 5 / ADC channel 5 |
| Chân 24 | PAD06/AN06 — Port AD bit 6 / ADC channel 6 |
| Chân 25 | PAD07/AN07 — Port AD bit 7 / ADC channel 7 |
| Chân 26 | PAD08/AN08 — Port AD bit 8 / ADC channel 8 |
| Chân 27 | PAD09/AN09 — Port AD bit 9 / ADC channel 9 |
| Chân 28 | PAD10/AN10 — Port AD bit 10 / ADC channel 10 |
| Chân 29 | PAD11/AN11 — Port AD bit 11 / ADC channel 11 |
| Chân 30 | PAD12/AN12 — Port AD bit 12 / ADC channel 12 |
| Chân 31 | PAD13/AN13 — Port AD bit 13 / ADC channel 13 |
| Chân 32 | PAD14/AN14 — Port AD bit 14 / ADC channel 14 |
| Chân 33 | PAD15/AN15 — Port AD bit 15 / ADC channel 15 |
| Chân 34 | VDDA — Analog supply voltage |
| Chân 35 | VSSA — Analog ground |
| Chân 36 | VRH — ADC reference high voltage |
| Chân 37 | VRL — ADC reference low voltage |
| Chân 38 | PM0 — Port M bit 0 |
| Chân 39 | PM1 — Port M bit 1 |
| Chân 40 | PM2 — Port M bit 2 |
| Chân 41 | PM3 — Port M bit 3 |
| Chân 42 | PM4 — Port M bit 4 |
| Chân 43 | PM5 — Port M bit 5 |
| Chân 44 | PM6 — Port M bit 6 |
| Chân 45 | PM7 — Port M bit 7 |
| Chân 46 | PJ0 — Port J bit 0 |
| Chân 47 | PJ1 — Port J bit 1 |
| Chân 48 | PJ2 — Port J bit 2 |
| Chân 49 | PJ3 — Port J bit 3 |
| Chân 50 | PJ4 — Port J bit 4 |
| Chân 51 | PJ5 — Port J bit 5 |
| Chân 52 | PJ6 — Port J bit 6 |
| Chân 53 | PJ7 — Port J bit 7 |
| Chân 54 | PK0 — Port K bit 0 |
| Chân 55 | PK1 — Port K bit 1 |
| Chân 56 | PK2 — Port K bit 2 |
| Chân 57 | PK3 — Port K bit 3 |
| Chân 58 | PK4 — Port K bit 4 |
| Chân 59 | PK5 — Port K bit 5 |
| Chân 60 | PK6 — Port K bit 6 |
| Chân 61 | PK7 — Port K bit 7 |
| Chân 62 | PA0 — Port A bit 0 |
| Chân 63 | PA1 — Port A bit 1 |
| Chân 64 | PA2 — Port A bit 2 |
| Chân 65 | PA3 — Port A bit 3 |
| Chân 66 | PA4 — Port A bit 4 |
| Chân 67 | PA5 — Port A bit 5 |
| Chân 68 | PA6 — Port A bit 6 |
| Chân 69 | PA7 — Port A bit 7 |
| Chân 70 | PB0 — Port B bit 0 |
| Chân 71 | PB1 — Port B bit 1 |
| Chân 72 | PB2 — Port B bit 2 |
| Chân 73 | PB3 — Port B bit 3 |
| Chân 74 | PB4 — Port B bit 4 |
| Chân 75 | PB5 — Port B bit 5 |
| Chân 76 | PB6 — Port B bit 6 |
| Chân 77 | PB7 — Port B bit 7 |
| Chân 78 | PC0 — Port C bit 0 |
| Chân 79 | PC1 — Port C bit 1 |
| Chân 80 | PC2 — Port C bit 2 |
Ứng dụng tiêu biểu
MC9S12XDG128MAA phù hợp cho 6 Áp dụngs: Automotive Body Control Module, Industrial CAN Node Controller, BLDC / PMSM Motor Controller, Building Automation Gateway, Sensor Fusion Node with CAN Output, HVAC and Climate Control ECU.
Automotive Body Control Module
The MC9S12XDG128MAA's S12X core with XGATE co-processor and multiple msCAN 2.0 modules make it well suited to automotive body and chassis ECUs. The XGATE handles msCAN message buffering and PWM updates in parallel, freeing the main S12X CPU for BCM logic such as lighting control, central locking, and door module coordination. The 128KB Flash accommodates a CANopen or J1939 stack plus application logic; 12KB RAM is sufficient for runtime buffers. The 80-QFP MAA package is the industry-standard automotive MCU footprint used across BCM suppliers, simplifying harness and PCB reuse. The device operates over -40C to +125C, covering under-hood and cabin requirements.
Được đề xuất
Industrial CAN Node Controller
For industrial CANopen or DeviceNet nodes, the MC9S12XDG128MAA offers the S12X 16-bit CPU at 80MHz (40MHz bus) and on-chip msCAN modules, removing the need for an external CAN controller. The XGATE co-processor services CAN message objects, achieving deterministic bus latency under 50us which is critical for real-time industrial protocols. 128KB Flash holds a CANopen stack plus device-specific profiles; 12KB RAM supports PDO buffers. Single 5V supply with internal 2.5V regulator simplifies power tree design in 24V industrial systems with intermediate buck regulation.
Được đề xuất
BLDC / PMSM Motor Controller
The MC9S12XDG128MAA's Enhanced Capture Timer (ECT) with PWM outputs is well matched to 3-phase BLDC and PMSM motor commutation. XGATE offloads ADC sequencing and current-sense sampling so the main S12X CPU runs the FOC algorithm without jitter. The 8-channel 10/12-bit ADC handles phase current feedback, while msCAN provides the bus interface to a supervisory controller. The 80-QFP MAA footprint is a common automotive motor-control land pattern, allowing reuse across pump, fan, and small traction drives. Designers often pair the MCU with a 3-phase gate driver such as the MC33937.
Được đề xuất
Building Automation Gateway
The MC9S12XDG128MAA is used as a sub-network gateway in building automation, bridging BACnet, LonWorks, or KNX segments to a backbone IP or CAN bus. Its multiple serial interfaces (SCI x2, SPI, I2C) handle sensor and transceiver side-channels while msCAN carries the backbone traffic. The 128KB Flash supports BACnet application code plus configuration tables; 12KB RAM holds routing buffers. XGATE offloads the serial-character parsing routines, enabling the main CPU to focus on routing logic. The wide operating temperature range supports unconditioned mechanical rooms and outdoor enclosures.
Được đề xuất
Sensor Fusion Node with CAN Output
In automotive ADAS sensor nodes and chassis sensors, the MC9S12XDG128MAA aggregates IMU, pressure, and wheel-speed data and reports over CAN. The S12X core at 80MHz runs Kalman filter routines; XGATE services SPI/I2C sensor reads and msCAN message buffering deterministically. The 8-channel ADC handles analog sensor inputs such as throttle position and brake pressure. 128KB Flash is sufficient for sensor drivers and a small CAN-based diagnostic stack; 12KB RAM holds filter state. The 80-QFP MAA package fits within tight sensor-housing PCBs and supports -40C to +125C automotive temperature range.
Được đề xuất
HVAC and Climate Control ECU
Automotive HVAC ECUs use the MC9S12XDG128MAA to drive blower motors, blend doors, and temperature sensors while communicating over CAN with the body controller. The ECT and PWM outputs control actuator drivers; msCAN provides body network connectivity. 128KB Flash stores the climate control algorithm and CAN diagnostics; 12KB RAM holds sensor tables. XGATE handles PWM duty-cycle updates so the main CPU runs the thermal model without jitter. The -40C to +125C range and 80-QFP MAA footprint suit under-dash automotive mounting requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S12XDG128MAA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9S12XDG128CAA | MC9S12XDT512MAA |
|---|---|---|---|
| Package | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | S12X with XGATE | S12X with XGATE - same | S12X with XGATE - same |
| Maximum CPU Frequency | 80 MHz (40 MHz bus) | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 512 KB (+300%) |
| RAM | 12 KB | 12 KB | 32 KB (+167%) |
| Operating Temperature | -40C to +125C (industrial / automotive) | 0C to +70C (commercial) | -40C to +125C |
| Lifecycle Status | End of Life (NRND) | Not Recommended for New Designs | Active / Last Time Buy varies |
| CAN Modules (msCAN) | Multiple msCAN 2.0 A/B | Same | Same or more |
Bảo phân biệt quan trọng
- XGATE co-processor for deterministic interrupt offload (vsMC9S12DG128CFUE (non-X S12 core))
- 128KB Flash in 80-QFP MAA footprint with full automotive grade (vsMC9S12XDG128CAA (commercial grade))
- Same 80-QFP MAA footprint as higher-density S12XDT (vsMC9S12XDT512MAA (512KB variant))
Ghi chú thiết kế
The MC9S12XDG128MAA requires a single 5V supply on VDDR/VSS with the internal 2.5V regulator powering the core. Decouple VDDR with a 1uF X7R ceramic placed within 5mm of the pin and add a bulk 10uF tantalum or aluminum polymer capacitor. The internal voltage regulator requires an external ballast capacitor on the VDD core rail; consult the S12XD reference manual for exact values. Estimated: at 80MHz core, the device draws approximately 50-70 mA from VDDR - design your 5V LDO or buck regulator with at least 200 mA headroom.
In the 80-QFP MAA package, theta_JA is approximately 50 C/W typical on a 4-layer JEDEC test board. At -40C to +125C operation, the junction temperature must stay below 150C, leaving ~25C margin at the upper ambient bound. For under-hood automotive designs at +85C ambient with full peripheral activity, confirm with on-board thermal measurements. The XGATE co-processor adds a small additional thermal load proportional to its duty cycle - typically 5-10% of CPU thermal contribution.
Place all decoupling capacitors (0.1uF + 1uF) on VDD/VSS pairs within 2-3mm of the IC pins. The XTAL and EXTAL traces should be short and surrounded by a ground guard ring; keep crystal traces away from noisy switching signals. The 80-QFP MAA package has a 14x14 mm body with 0.65mm pitch - use 4-layer PCB with a continuous ground plane for noise immunity. Route CAN differential pairs (CANH, CANL) as a matched 100-ohm impedance pair with no stubs.
Do not float the TEST pin - it must be tied to VSS for normal operation or the device enters test mode. The BKGD pin is shared with the MODC function at reset - ensure proper pull-up or pull-down configuration for the desired debug mode. The XGATE co-processor requires explicit setup code before use - leaving it uninitialized is acceptable but disabling interrupts on the main CPU assumes XGATE handles them. Always check the S12XD errata document for known silicon revisions before locking the PCB layout.
Thông tin tuân thủ
RoHS compliant per NXP product page. AEC-Q100 grade not stated explicitly - the industrial -40C to +125C temperature range supports automotive under-hood designs but explicit AEC-Q100 qualification should be confirmed with NXP for safety-critical applications. Halogen-free status not stated in available data.
