MC9S12XDG128MAA - 16-bit HCS12X MCU, 128KB Flash, 80MHz, 80-QFP | NXP
부품 번호: MC9S12XDG128MAA ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.42 | $18.42 |
| 10 | $16.85 | $168.50 |
| 100 | $14.2 | $1,420.00 |
| 500 | $12.1 | $6,050.00 |
| 1,000 | $10.45 | $10,450.00 |
MC9S12XDG128MAA 개요
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces (CAN, SPI, SCI, I2C), and GPIO. The HCS12X architecture from Freescale (now NXP) is a 16-bit CISC core that is upward-compatible with the legacy HC12/HCS12 instruction set, with enhancements including an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HCS12 programmer's model. The X-variant adds a peripheral co-processor (XGATE) for offloading interrupt-driven tasks.
Key features include 128KB (128K x 8) of in-application programmable Flash, 12KB of RAM, an Enhanced Capture Timer (ECT), an 8-channel 10-bit ADC, multiple CAN 2.0 modules (msCAN), J1850/SCI/SPI interfaces, and an integrated voltage regulator for single 5V or 3.3V operation. The device supports background debug mode (BDM) and single-wire debug, simplifying in-circuit development and field updates.
The S12XD architecture uses a unified memory map with Flash, RAM, and EEPROM in a single address space, and includes a Memory Protection Unit (MPU) and ECC on the Flash array. The XGATE co-processor can execute data-movement and peripheral-handling routines independently, freeing the main CPU for control-loop tasks. The 80-QFP (MAA suffix) package provides 80 general-purpose I/O lines with 5V tolerant inputs.
Typical applications include automotive body and chassis ECUs, industrial CAN node controllers, building automation gateways, motor control (BLDC/PMSM) with CAN, and sensor-fusion nodes. Designers often pair the XGATE with an msCAN handler to achieve deterministic bus latency below 50 microseconds. Per the NXP product page, this part is flagged as End of Life and is not recommended for new designs - choose S12XEP or S12XET active variants for new programs.
드롭인 대체품: MC9S12XDG128MAA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S12XDG128MAA (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S12XDG128CAA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S12XDT512MAA
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S12XDG128MAA 최대 정격 & 전기적 특성
| Core Architecture | HCS12X (16-bit CISC, enhanced) |
| CPU Core | S12X with XGATE co-processor |
| Maximum CPU Frequency | 80 MHz (40 MHz bus) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM | 12 KB |
| Operating Voltage | 2.5 V or 5 V (single supply with internal regulator) |
| 패키지 | 80-pin QFP (14 x 14 mm), MAA suffix |
| 실장 유형 | Surface Mount |
| Communication Interfaces | CAN, SCI, SPI, I2C, J1850 |
| 동작 온도 | -40C to +125C (industrial / automotive grade) |
| RoHS 상태 | Compliant |
| Background Debug Mode | Yes (BDM, single-wire) |
| Instruction Set Compatibility | Upward-compatible with HCS12, instruction queue, enhanced indexed addressing |
MC9S12XDG128MAA 핀 구성
| 핀 1 | BKGD — Background Debug Mode pin |
| 핀 2 | VDDR — Voltage regulator supply |
| 핀 3 | VDD — Digital supply voltage |
| 핀 4 | VSS — Digital ground |
| 핀 5 | RESET — External reset input, active low |
| 핀 6 | XTAL — Crystal oscillator input |
| 핀 7 | EXTAL — Crystal oscillator input |
| 핀 8 | VSSXOSC — Crystal oscillator ground |
| 핀 9 | TEST — Test mode pin (must be tied to VSS in normal operation) |
| 핀 10 | PE0/XIRQ — Port E bit 0 / non-maskable interrupt |
| 핀 11 | PE1/IRQ — Port E bit 1 / maskable interrupt |
| 핀 12 | PE2 — Port E bit 2 |
| 핀 13 | PE3 — Port E bit 3 |
| 핀 14 | PE4 — Port E bit 4 |
| 핀 15 | PE5 — Port E bit 5 |
| 핀 16 | PE6 — Port E bit 6 |
| 핀 17 | PE7 — Port E bit 7 |
| 핀 18 | PAD00/AN00 — Port AD bit 0 / ADC channel 0 |
| 핀 19 | PAD01/AN01 — Port AD bit 1 / ADC channel 1 |
| 핀 20 | PAD02/AN02 — Port AD bit 2 / ADC channel 2 |
| 핀 21 | PAD03/AN03 — Port AD bit 3 / ADC channel 3 |
| 핀 22 | PAD04/AN04 — Port AD bit 4 / ADC channel 4 |
| 핀 23 | PAD05/AN05 — Port AD bit 5 / ADC channel 5 |
| 핀 24 | PAD06/AN06 — Port AD bit 6 / ADC channel 6 |
| 핀 25 | PAD07/AN07 — Port AD bit 7 / ADC channel 7 |
| 핀 26 | PAD08/AN08 — Port AD bit 8 / ADC channel 8 |
| 핀 27 | PAD09/AN09 — Port AD bit 9 / ADC channel 9 |
| 핀 28 | PAD10/AN10 — Port AD bit 10 / ADC channel 10 |
| 핀 29 | PAD11/AN11 — Port AD bit 11 / ADC channel 11 |
| 핀 30 | PAD12/AN12 — Port AD bit 12 / ADC channel 12 |
| 핀 31 | PAD13/AN13 — Port AD bit 13 / ADC channel 13 |
| 핀 32 | PAD14/AN14 — Port AD bit 14 / ADC channel 14 |
| 핀 33 | PAD15/AN15 — Port AD bit 15 / ADC channel 15 |
| 핀 34 | VDDA — Analog supply voltage |
| 핀 35 | VSSA — Analog ground |
| 핀 36 | VRH — ADC reference high voltage |
| 핀 37 | VRL — ADC reference low voltage |
| 핀 38 | PM0 — Port M bit 0 |
| 핀 39 | PM1 — Port M bit 1 |
| 핀 40 | PM2 — Port M bit 2 |
| 핀 41 | PM3 — Port M bit 3 |
| 핀 42 | PM4 — Port M bit 4 |
| 핀 43 | PM5 — Port M bit 5 |
| 핀 44 | PM6 — Port M bit 6 |
| 핀 45 | PM7 — Port M bit 7 |
| 핀 46 | PJ0 — Port J bit 0 |
| 핀 47 | PJ1 — Port J bit 1 |
| 핀 48 | PJ2 — Port J bit 2 |
| 핀 49 | PJ3 — Port J bit 3 |
| 핀 50 | PJ4 — Port J bit 4 |
| 핀 51 | PJ5 — Port J bit 5 |
| 핀 52 | PJ6 — Port J bit 6 |
| 핀 53 | PJ7 — Port J bit 7 |
| 핀 54 | PK0 — Port K bit 0 |
| 핀 55 | PK1 — Port K bit 1 |
| 핀 56 | PK2 — Port K bit 2 |
| 핀 57 | PK3 — Port K bit 3 |
| 핀 58 | PK4 — Port K bit 4 |
| 핀 59 | PK5 — Port K bit 5 |
| 핀 60 | PK6 — Port K bit 6 |
| 핀 61 | PK7 — Port K bit 7 |
| 핀 62 | PA0 — Port A bit 0 |
| 핀 63 | PA1 — Port A bit 1 |
| 핀 64 | PA2 — Port A bit 2 |
| 핀 65 | PA3 — Port A bit 3 |
| 핀 66 | PA4 — Port A bit 4 |
| 핀 67 | PA5 — Port A bit 5 |
| 핀 68 | PA6 — Port A bit 6 |
| 핀 69 | PA7 — Port A bit 7 |
| 핀 70 | PB0 — Port B bit 0 |
| 핀 71 | PB1 — Port B bit 1 |
| 핀 72 | PB2 — Port B bit 2 |
| 핀 73 | PB3 — Port B bit 3 |
| 핀 74 | PB4 — Port B bit 4 |
| 핀 75 | PB5 — Port B bit 5 |
| 핀 76 | PB6 — Port B bit 6 |
| 핀 77 | PB7 — Port B bit 7 |
| 핀 78 | PC0 — Port C bit 0 |
| 핀 79 | PC1 — Port C bit 1 |
| 핀 80 | PC2 — Port C bit 2 |
일반적인 애플리케이션
MC9S12XDG128MAA 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Industrial CAN Node Controller, BLDC / PMSM Motor Controller, Building Automation Gateway, Sensor Fusion Node with CAN Output, HVAC and Climate Control ECU.
Automotive Body Control Module
The MC9S12XDG128MAA's S12X core with XGATE co-processor and multiple msCAN 2.0 modules make it well suited to automotive body and chassis ECUs. The XGATE handles msCAN message buffering and PWM updates in parallel, freeing the main S12X CPU for BCM logic such as lighting control, central locking, and door module coordination. The 128KB Flash accommodates a CANopen or J1939 stack plus application logic; 12KB RAM is sufficient for runtime buffers. The 80-QFP MAA package is the industry-standard automotive MCU footprint used across BCM suppliers, simplifying harness and PCB reuse. The device operates over -40C to +125C, covering under-hood and cabin requirements.
추천
Industrial CAN Node Controller
For industrial CANopen or DeviceNet nodes, the MC9S12XDG128MAA offers the S12X 16-bit CPU at 80MHz (40MHz bus) and on-chip msCAN modules, removing the need for an external CAN controller. The XGATE co-processor services CAN message objects, achieving deterministic bus latency under 50us which is critical for real-time industrial protocols. 128KB Flash holds a CANopen stack plus device-specific profiles; 12KB RAM supports PDO buffers. Single 5V supply with internal 2.5V regulator simplifies power tree design in 24V industrial systems with intermediate buck regulation.
추천
BLDC / PMSM Motor Controller
The MC9S12XDG128MAA's Enhanced Capture Timer (ECT) with PWM outputs is well matched to 3-phase BLDC and PMSM motor commutation. XGATE offloads ADC sequencing and current-sense sampling so the main S12X CPU runs the FOC algorithm without jitter. The 8-channel 10/12-bit ADC handles phase current feedback, while msCAN provides the bus interface to a supervisory controller. The 80-QFP MAA footprint is a common automotive motor-control land pattern, allowing reuse across pump, fan, and small traction drives. Designers often pair the MCU with a 3-phase gate driver such as the MC33937.
추천
Building Automation Gateway
The MC9S12XDG128MAA is used as a sub-network gateway in building automation, bridging BACnet, LonWorks, or KNX segments to a backbone IP or CAN bus. Its multiple serial interfaces (SCI x2, SPI, I2C) handle sensor and transceiver side-channels while msCAN carries the backbone traffic. The 128KB Flash supports BACnet application code plus configuration tables; 12KB RAM holds routing buffers. XGATE offloads the serial-character parsing routines, enabling the main CPU to focus on routing logic. The wide operating temperature range supports unconditioned mechanical rooms and outdoor enclosures.
추천
Sensor Fusion Node with CAN Output
In automotive ADAS sensor nodes and chassis sensors, the MC9S12XDG128MAA aggregates IMU, pressure, and wheel-speed data and reports over CAN. The S12X core at 80MHz runs Kalman filter routines; XGATE services SPI/I2C sensor reads and msCAN message buffering deterministically. The 8-channel ADC handles analog sensor inputs such as throttle position and brake pressure. 128KB Flash is sufficient for sensor drivers and a small CAN-based diagnostic stack; 12KB RAM holds filter state. The 80-QFP MAA package fits within tight sensor-housing PCBs and supports -40C to +125C automotive temperature range.
추천
HVAC and Climate Control ECU
Automotive HVAC ECUs use the MC9S12XDG128MAA to drive blower motors, blend doors, and temperature sensors while communicating over CAN with the body controller. The ECT and PWM outputs control actuator drivers; msCAN provides body network connectivity. 128KB Flash stores the climate control algorithm and CAN diagnostics; 12KB RAM holds sensor tables. XGATE handles PWM duty-cycle updates so the main CPU runs the thermal model without jitter. The -40C to +125C range and 80-QFP MAA footprint suit under-dash automotive mounting requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S12XDG128MAA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12XDG128CAA | MC9S12XDT512MAA |
|---|---|---|---|
| Package | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | S12X with XGATE | S12X with XGATE - same | S12X with XGATE - same |
| Maximum CPU Frequency | 80 MHz (40 MHz bus) | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 512 KB (+300%) |
| RAM | 12 KB | 12 KB | 32 KB (+167%) |
| Operating Temperature | -40C to +125C (industrial / automotive) | 0C to +70C (commercial) | -40C to +125C |
| Lifecycle Status | End of Life (NRND) | Not Recommended for New Designs | Active / Last Time Buy varies |
| CAN Modules (msCAN) | Multiple msCAN 2.0 A/B | Same | Same or more |
주요 차별점
- XGATE co-processor for deterministic interrupt offload (vs MC9S12DG128CFUE (non-X S12 core))
- 128KB Flash in 80-QFP MAA footprint with full automotive grade (vs MC9S12XDG128CAA (commercial grade))
- Same 80-QFP MAA footprint as higher-density S12XDT (vs MC9S12XDT512MAA (512KB variant))
설계 노트
The MC9S12XDG128MAA requires a single 5V supply on VDDR/VSS with the internal 2.5V regulator powering the core. Decouple VDDR with a 1uF X7R ceramic placed within 5mm of the pin and add a bulk 10uF tantalum or aluminum polymer capacitor. The internal voltage regulator requires an external ballast capacitor on the VDD core rail; consult the S12XD reference manual for exact values. Estimated: at 80MHz core, the device draws approximately 50-70 mA from VDDR - design your 5V LDO or buck regulator with at least 200 mA headroom.
In the 80-QFP MAA package, theta_JA is approximately 50 C/W typical on a 4-layer JEDEC test board. At -40C to +125C operation, the junction temperature must stay below 150C, leaving ~25C margin at the upper ambient bound. For under-hood automotive designs at +85C ambient with full peripheral activity, confirm with on-board thermal measurements. The XGATE co-processor adds a small additional thermal load proportional to its duty cycle - typically 5-10% of CPU thermal contribution.
Place all decoupling capacitors (0.1uF + 1uF) on VDD/VSS pairs within 2-3mm of the IC pins. The XTAL and EXTAL traces should be short and surrounded by a ground guard ring; keep crystal traces away from noisy switching signals. The 80-QFP MAA package has a 14x14 mm body with 0.65mm pitch - use 4-layer PCB with a continuous ground plane for noise immunity. Route CAN differential pairs (CANH, CANL) as a matched 100-ohm impedance pair with no stubs.
Do not float the TEST pin - it must be tied to VSS for normal operation or the device enters test mode. The BKGD pin is shared with the MODC function at reset - ensure proper pull-up or pull-down configuration for the desired debug mode. The XGATE co-processor requires explicit setup code before use - leaving it uninitialized is acceptable but disabling interrupts on the main CPU assumes XGATE handles them. Always check the S12XD errata document for known silicon revisions before locking the PCB layout.
규정 준수 정보
RoHS compliant per NXP product page. AEC-Q100 grade not stated explicitly - the industrial -40C to +125C temperature range supports automotive under-hood designs but explicit AEC-Q100 qualification should be confirmed with NXP for safety-critical applications. Halogen-free status not stated in available data.
