MCZ33905CD3EK - SBC CAN HS 3.3V Dual LIN 54-SOIC-EP | NXP
MPN: MCZ33905CD3EK ✗ Cuối đờiMCZ33905CD3EK Tóm tắt
A System Basis Chip (SBC) is an automotive-grade mixed-signal IC that consolidates the power management, communication transceivers, and protective functions a microcontroller needs around it. Instead of placing a stand-alone LDO, CAN transceiver, LIN transceiver, and reset supervisor separately, an SBC merges these blocks behind a single fault-tolerant interface, which simplifies board layout, reduces BOM count, and improves diagnostic coverage for chassis and body electronics modules.
The device operates from a 5.5V to 28V supply range and supports normal/sleep modes with low quiescent current for battery-friendly standby. It integrates enhanced high-speed CAN compliant with ISO 11898-2 and ISO 11898-5, with local and bus failure diagnostics, protection, and fail-safe behavior. Two LIN 2.x transceivers support body-domain slaves such as seat controllers, window lifters, mirror modules, and sensor clusters. A dedicated 3.3V low-dropout regulator powers the host MCU, while a separate tracker/auxiliary output supports additional ICs.
In operation, the MC33905 sits between the 12V automotive battery rail and a 32-bit MCU. The internal 3.3V LDO feeds the MCU core, the CAN bus is routed through the integrated HS-CAN transceiver to bus pins, and the dual LIN channels are exposed for slave-node communication. The exposed pad (EP) of the 54-SOIC-EP provides the thermal path for sustained battery-voltage load transients.
Key applications include automotive body control modules, gateway modules, HVAC controllers, instrument clusters, and industrial CAN nodes that require both LIN master/slave and HS-CAN. Engineers typically select this SBC when a single-chip solution reduces PCB area, BOM cost, and EMC complexity in mixed CAN/LIN networks.
This page synthesizes distributor availability, parametric positioning, and design guidance not found in the manufacturer datasheet, including a curated cross-reference of same-family NXP SBCs that share the same footprint and pinout, enabling drop-in replacement in long-life programs.
When designing, ensure the exposed pad is soldered to a sufficiently large copper pour to meet the thermal and ground-return requirements of automotive load-dump and jump-start transients, and respect the absolute maximum Vbat rating during reverse-battery events.
Bộ thay thế dễ dàng lắp đặt cho MCZ33905CD3EK — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCZ33905CD3EK (cùng hình factor và footprint) — khác nhau ở CAN Data Rate, CAN Interface, Function, LIN Interface, Package.
MCZ33903CD3EK
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCZ33904CD3EK
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCZ33905D3EK
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCZ33905CD3EKR2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MCZ33905CD3EK Tỷ lệ tối đa & tính chất điện
| Product Type | System Basis Chip (SBC) |
| Manufacturer | NXP Semiconductors |
| Series | MC33903/4/5 second-generation SBC |
| Chức năng | CAN + LIN + 3.3V LDO System Basis Chip |
| Supply Voltage Range | 5.5 V to 28 V |
| On-board MCU Regulator | 3.3 V LDO |
| CAN Interface | High-Speed CAN (ISO 11898-2 and ISO 11898-5) |
| CAN Data Rate | 20 kbps minimum; up to 1 Mbps typical for HS-CAN |
| LIN Interface | Dual LIN 2.x transceivers |
| Operating Modes | Normal / Sleep |
| Hộp | 54-SOIC-EP (54-pin SOIC with Exposed Pad) |
| Kiểu lắp đặt | Surface Mount |
| Lead-Free / RoHS | Compliant |
| Operating Temperature (Automotive) | -40C to +125C (Grade 1) |
| Applications | Body Control Modules, Gateway, HVAC, Instrument Cluster, Industrial CAN |
| Diagnostic Features | Local and bus failure diagnostics, protection, fail-safe |
Hướng dẫn cấu hình chân MCZ33905CD3EK 54-soic-ep (54-pin soic with exposed pad)
Cấu hình chân cho MCZ33905CD3EK (54-soic-ep (54-pin soic with exposed pad) gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho MCZ33905CD3EK.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MCZ33905CD3EK phù hợp cho 6 Áp dụngs: Automotive Body Control Module (BCM), Central Gateway ECU, HVAC Control Module, Instrument Cluster, Industrial CAN/LIN Node, Seat / Mirror / Window-Lifter Module.
Automotive Body Control Module (BCM)
The MCZ33905CD3EK is purpose-built for automotive body control modules where it consolidates a 3.3V MCU supply, an ISO 11898-2/-5 HS-CAN transceiver, and two LIN 2.x slaves behind one chip. With a 5.5V to 28V battery input it tolerates 12V jump-start and load-dump transients without external protection, while the integrated 3.3V LDO feeds the host MCU directly. The exposed pad of the 54-SOIC-EP provides the ground and heatsinking path required for sustained body-electronics duty cycles.
Được đề xuất
Central Gateway ECU
In a central gateway ECU the MCZ33905CD3EK provides the HS-CAN physical layer for backbone communication between CAN sub-networks while the dual LIN channels bridge body-domain LIN clusters to the CAN backbone. The 3.3V LDO powers a 32-bit gateway MCU, and the wide 5.5V to 28V input range accepts direct battery feed in passenger and commercial vehicles. Its diagnostic coverage for local and bus failures supports the fail-safe behavior demanded by gateway architectures.
Được đề xuất
HVAC Control Module
The MCZ33905CD3EK fits HVAC modules that need to communicate on the vehicle CAN bus while driving multiple LIN-based flaps, blowers, and sensor nodes. Its dual LIN channels let a single SBC drive two independent LIN sub-nets, while the HS-CAN interface talks to the climate-control master on the chassis CAN bus. The integrated 3.3V regulator eliminates an external LDO and the -40C to +125C grade-1 rating supports cabin and engine-bay HVAC packaging.
Được đề xuất
Instrument Cluster
The MCZ33905CD3EK supports instrument clusters that receive drive data over HS-CAN and control tell-tales or backlighting through LIN. Its integrated 3.3V LDO powers the cluster MCU and display driver, while the wide supply tolerance covers cold-crank and load-dump events on the vehicle battery. The 54-SOIC-EP package is well-suited to the constrained PCB area behind the cluster bezel and offers the ground-return performance needed for EMC-sensitive display signals.
Được đề xuất
Industrial CAN/LIN Node
The MCZ33905CD3EK serves industrial controllers exposed to wide DC bus voltages from 5.5V to 28V and requiring both CAN and LIN connectivity in one footprint. The integrated HS-CAN and dual LIN make it suitable for factory automation I/O blocks, building automation panels, and agricultural machinery networks. The exposed pad of the SOIC-EP provides the thermal path for sustained 24V industrial operation.
Được đề xuất
Seat / Mirror / Window-Lifter Module
Body-domain LIN slave modules such as seat controllers, mirror adjusters, and window lifters benefit from the dual LIN channels and the HS-CAN connectivity of the MCZ33905CD3EK. The 3.3V LDO powers the local 8-bit or 32-bit LIN slave MCU, and the wide supply input covers 12V battery transients. The 54-SOIC-EP footprint allows straightforward placement in space-constrained door-module and seat-module PCBs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MCZ33905CD3EK — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MCZ33903CD3EK | MCZ33904CD3EK | MCZ33905D3EK | MCZ33905CD3EKR2 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 54-SOIC-EP | 54-SOIC-EP | 54-SOIC-EP | 54-SOIC-EP | 54-SOIC-EP |
| Supply Voltage | 5.5 V to 28 V | 5.5 V to 28 V | 5.5 V to 28 V | 5.5 V to 28 V | 5.5 V to 28 V |
| On-board MCU LDO | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| CAN Channels | 1 x HS-CAN (ISO 11898-2/-5) | 1 x HS-CAN | 1 x HS-CAN | 1 x HS-CAN | 1 x HS-CAN |
| LIN Channels | 2 | 1 | 2 (variant dependent) | 2 | 2 |
| Lifecycle Status | Obsolete (EOL) | Obsolete (EOL) | Obsolete (EOL) | Obsolete (EOL) | Obsolete (EOL) |
| Packing | Tube | Tube | Tube | Tube | Tape and Reel (R2) |
Bảo phân biệt quan trọng
- Dual LIN 2.x transceivers integrated alongside HS-CAN (vsMCZ33903CD3EK)
- Second-generation SBC family with enhanced diagnostics (vsMCZ33390EFR2)
- Wide 5.5V to 28V supply supports 24V truck networks (vsDiscrete LDO + CAN + LIN implementations)
Ghi chú thiết kế
Solder the exposed pad of the 54-SOIC-EP to a continuous ground copper pour of at least 1 square inch. The exposed pad carries both the thermal dissipation path and the low-impedance ground return required during automotive load-dump and jump-start events. Without proper pad soldering the device may overheat or fail EMC.
Place a reverse-battery protection diode or P-MOSFET on the Vbat pin, and add a load-dump clamp (TVS or active suppressor) sized to the absolute maximum battery rating. The MCZ33905CD3EK accepts 5.5V to 28V on Vbat, but transients above this range during alternator load-dump can exceed the absolute maximum if not clamped externally.
Keep the HS-CAN bus pins (CANH, CANL) routed as a differential pair with 120 ohm characteristic impedance and 100 nF bus-splitting capacitors as recommended by ISO 11898-2. Place the LIN bus pins close to the connector with ESD protection diodes rated to at least 8 kV HBM to survive handling and field transients.
Do not assume the MCZ33905CD3EK can drive the MCU I/O directly - the integrated 3.3V LDO is intended for MCU core supply, not high-current peripheral rails. Always check the LDO current capability against the MCU plus peripherals worst case, and add an external regulator if total load is above the SBC rating.
Thông tin tuân thủ
AEC-Q100 qualification is typical for the MC33903/4/5 SBC family per NXP automotive-grade marketing; halogen-free status not stated in verified web data and left as unknown.
