MPC880ZP66 - 66MHz 32-Bit PowerQUICC MPU | NXP
MPN: MPC880ZP66 ✗ Cuối đờiMPC880ZP66 Tóm tắt
A PowerQUICC microprocessor is a system-on-chip processor designed around the Power Architecture instruction set and a communications processor architecture. Within the semiconductor hierarchy, it belongs to the microprocessor and embedded-processor class, then to 32-bit RISC processors, and finally to the broader integrated-circuit and embedded-computing categories. Its integrated communications peripherals reduce the component count required in routers, protocol converters, embedded gateways, and control systems.
The verified specifications identify the MPC880ZP66 as an MPC8xx processor with one 32-bit core, a 66 MHz operating frequency, a 3.3 V supply, and a 357-PBGA package. The ZP order code is associated with tray packaging in the supplied hardware listing. Search results also identify the device with an operating range from 0 C to 95 C and describe the underlying MPC885/MPC880 hardware documentation.
Its communications-oriented architecture makes it relevant to industrial networking, protocol conversion, embedded communications, and control applications where a dedicated processor is preferable to a general-purpose desktop-class CPU. The MPC880 family is associated with networking and communications products, while the integrated communications peripherals support efficient handling of data-transfer workloads and control traffic.
The principal engineering consideration is legacy-board compatibility. A replacement must match the 357-ball PBGA footprint, ball assignments, core voltage, clock requirements, bus behavior, and peripheral configuration rather than merely sharing the 66 MHz operating frequency. The original MPC885/MPC880 hardware specifications should therefore be used to validate any substitute before production use.
This page consolidates the verified distributor specifications, package details, documented comparison candidates, and practical replacement criteria. It distinguishes confirmed pin-compatible options from broad functional similarities and explicitly identifies electrical, lifecycle, and pricing details that require confirmation from authorized sources.
Bộ thay thế dễ dàng lắp đặt cho MPC880ZP66 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC880ZP66 (cùng hình factor và footprint) — khác nhau ở Core Architecture, RoHS Status, Data Bus Width, Package, Core Count.
MPC885ZP66
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC880CVR66
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC880ZP80
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MPC880ZP66 Tỷ lệ tối đa & tính chất điện
| Processor Type | MPC8xx PowerQUICC communications microprocessor |
| Architecture | Power Architecture |
| Core Count | 1 core |
| Data Width | 32 bit |
| Tần số xung maksimum | 66 MHz |
| Điện áp cung cấp | 3.3 V |
| Khoảng nhiệt độ hoạt động | 0 C to 95 C |
| Package Type | 357-PBGA (25 x 25 mm) |
| Package Pin Count | 357 pins |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tray |
| Trạng thái RoHS | RoHS |
| Lead-Free Status | Contains Lead |
Hướng dẫn cấu hình chân MPC880ZP66 357 pins
Cấu hình chân cho MPC880ZP66 (357 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MPC880ZP66.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MPC880ZP66 phù hợp cho 6 Áp dụngs: Industrial Protocol Gateway, Embedded Ethernet Communication Controller, Network Interface Gateway, Data Acquisition and Control System, Security Appliance Controller, Telecommunications Line Interface Equipment.
Industrial Protocol Gateway
The MPC880ZP66 fits a legacy industrial protocol gateway because it combines a 66 MHz, 32-bit Power Architecture core with communications-oriented processor resources in a 3.3 V design. The device can serve as the control processor for translating data among industrial interfaces while managing protocol state, diagnostics, and supervisory tasks. Its 357-PBGA package is large by current standards, so the PCB must provide the original 25 x 25 mm ball footprint and adequate thermal spreading. Before design adoption, verify the required serial interfaces, memory map, timer resources, and software drivers. The 0 C to 95 C documented range also requires enclosure-temperature analysis and appropriate protection from condensation, conducted noise, and industrial transients.
Được đề xuất
Embedded Ethernet Communication Controller
The MPC880ZP66 is applicable to an embedded Ethernet communication controller built around the established MPC880 software and hardware environment. Its 66 MHz 32-bit core provides dedicated processing for framing, protocol handling, status monitoring, and host-side control tasks, while its 3.3 V supply simplifies integration with compatible communications peripherals. The verified package is a 357-PBGA rather than a modern leadless package, making land-pattern and assembly continuity more important than processor headline performance. Engineers should confirm the integrated controller or companion PHY configuration, DMA requirements, memory interface, and timing against the MPC885/MPC880 hardware specifications before releasing a new board.
Được đề xuất
Network Interface Gateway
The MPC880ZP66 can be retained in a network interface gateway where deterministic legacy behavior and software compatibility outweigh newer controller efficiency. A 66 MHz PowerQUICC processor can coordinate communication tasks, maintain protocol state, and support management functions at 3.3 V without changing an established board architecture. Because the verified information does not enumerate the exact MAC or protocol peripherals, a designer must treat those features as an open engineering question until the manufacturer hardware specification is checked. Board-level validation should include PHY interoperability, isolation requirements, surge protection, thermal rise, and sustained traffic tests. A new gateway should also compare software-maintenance risk against current industrial alternatives.
Được đề xuất
Data Acquisition and Control System
The MPC880ZP66 is usable in a legacy data-acquisition controller when its existing 32-bit Power Architecture software stack, bus interface, and timing behavior are already qualified. The single 66 MHz core can coordinate sensor acquisition, local buffering, and supervisory control at a 3.3 V supply, avoiding an unnecessary processor-architecture migration. The principal constraint is package and lifecycle risk: the 357-PBGA requires a dense, temperature-controlled assembly process, and no current quantity pricing or authorized inventory was provided. Before production release, verify converter interface timing, memory compatibility, watchdog behavior, input protection, and functional safety assumptions in the hardware document rather than inferring them from the processor classification.
Được đề xuất
Security Appliance Controller
The MPC880ZP66 may be retained in a legacy security appliance or protocol-conversion controller where its existing code, memory configuration, and interface timing are proven. The 66 MHz, single-core Power Architecture implementation is appropriate for fixed control workloads rather than general-purpose modern compute, and its 3.3 V operating point supports integration with established communications circuitry. Because the supplied records do not enumerate cryptographic accelerators, memory interfaces, or security certifications, none should be inferred. Redesign validation should test the complete threat boundary, watchdog recovery, secure boot assumptions, peripheral isolation, and environmental behavior. For a new security product, a current processor with documented cryptographic support and a newer supply roadmap would usually be the safer starting point.
Được đề xuất
Telecommunications Line Interface Equipment
The MPC880ZP66 is relevant to telecommunications line-interface equipment that already uses the MPC880 PowerQUICC architecture for signaling, protocol processing, and equipment control. A dedicated 66 MHz 32-bit processor can handle communication workloads at 3.3 V while maintaining compatibility with established line-card software and board mechanics. Its verified operating range of 0 C to 95 C means enclosure design, airflow, and internal temperature rise are critical in telecommunications cabinets. The large 357-PBGA also affects inspection, rework, and long-term assembly sourcing. Before continuing production, validate timing margins, memory compatibility, interface isolation, conducted-immunity requirements, and lifecycle availability using the official hardware specification and current authorized distributors.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MPC880ZP66 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MPC885ZP66 | MPC880CVR66 | MPC880ZP80 |
|---|---|---|---|---|
| Package | 357-PBGA (25 x 25 mm) | PBGA-357; comparison record reports consistent package and terminals | 357-PBGA family; exact construction requires validation | 357-PBGA family; exact ball map requires validation |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Family | MPC8xx PowerQUICC | MPC885 PowerQUICC | MPC880 PowerQUICC | MPC880 PowerQUICC |
| Data Width | 32 bit | 32 bit | 32 bit | 32 bit |
| Clock Frequency | 66 MHz | 66 MHz | 66 MHz | 80 MHz, approximately 21% above target |
| Supply Voltage | 3.3 V | 3.3 V class; confirm in manufacturer documentation | 3.3 V class; confirm in manufacturer documentation | 3.3 V class; confirm in manufacturer documentation |
Bảo phân biệt quan trọng
- Strongest documented direct-replacement candidate (vsMPC885ZP66)
- Exact-frequency family alternative (vsMPC880CVR66)
- Higher-clock same-family option (vsMPC880ZP80)
Ghi chú thiết kế
Do not treat a shared MPC8xx family name or 66 MHz rating as proof of interchangeability. Validate the complete PCB footprint, all 357 ball assignments, power rails, clock configuration, memory interface, interrupt routing, boot behavior, and peripheral pin multiplexing against the MPC885/MPC880 hardware specifications. The strongest documented candidate is MPC885ZP66 because the supplied comparison explicitly reports consistent terminals and packages, but production approval still requires schematic, firmware, and hardware regression testing.
The MPC880ZP66 requires a 357-PBGA land pattern measuring 25 x 25 mm, so any no-change replacement must preserve the original ball map and courtyard constraints. Review via spacing, solder-mask definition, and thermal-via placement for the exposed or power-distribution balls using the package drawing. Do not infer package construction from the generic PBGA designation alone. PCB stack-up changes, pad changes, or reduced via arrays can create solder bridging, insufficient current capacity, or unacceptable thermal rise even when a distributor labels two parts as comparable.
Plan the 3.3 V rail around the exact processor current and external peripherals listed in the hardware specification; those operating-current values were not present in the supplied records and must not be estimated from processor frequency. Include local high-frequency bypass, controlled rise time, and sequencing appropriate to the platform. Check startup and shutdown behavior with peripherals attached, and use available voltage monitoring to prevent unintended processor or interface activity during brownout conditions.
Use the verified 0 C to 95 C device rating as the starting environmental constraint, then calculate enclosure temperature plus processor self-heating against the required margin. The 357-PBGA provides a large thermal footprint, but its junction-to-ambient resistance depends on PCB copper, via count, airflow, and neighboring heat sources. Validate with thermal simulation and chamber measurements because the supplied data does not provide a package-specific thermal-resistance value. Use thermocouples near the device during worst-case traffic and sustained processing loads.
Thông tin tuân thủ
The verified DigChip hardware specification lists the RoHS field as 'RoHS' without enough detail to classify compliance and identifies the lead-free status as 'Contains Lead'. No verified REACH, halogen-free, conflict-minerals, or automotive qualification data was supplied.
