Texas Instruments

OPA2677T - 220MHz Dual Current-Feedback Op Amp | Texas Instruments

MPN: OPA2677T ✓ Hoạt động
24 V (±12 V operation) Vdss 16-SOIC, PDSO16 Package
MOQ: 1 |

OPA2677T Tóm tắt

The Texas Instruments OPA2677T is a dual, wideband, high-output-current current-feedback operational amplifier built for DSL and PLC line-driver circuits. The OPA2677T provides 220 MHz gain-bandwidth performance, supports operation to ±12 V, is stable at unity gain, and is packaged in a 16-SOIC package. Its current-feedback architecture is intended for high-speed signal paths requiring wide bandwidth and substantial output-current capability.

A current-feedback operational amplifier is a voltage-input, current-input feedback amplifier commonly called a CFB amplifier. Unlike the voltage-feedback topology used by many general-purpose op amps, a current-feedback amplifier controls bandwidth through feedback impedance and can maintain high speed as gain changes, subject to the recommended feedback network. Current-feedback amplifiers belong to the operational-amplifier hierarchy within analog signal-chain and power-management semiconductor systems.

The principal features of the OPA2677T include dual amplifier channels, 220 MHz bandwidth, unity-gain stability, high output current, and operation from a total supply voltage of up to 24 V. Its wide bandwidth supports DSL and power-line modem line-driving requirements, where signal amplitude, slew behavior, output loading, and distortion all affect data transmission quality. The manufacturer identifies the OPA2677 family as a SpeedPlus operational-amplifier platform.

OPA2677T uses a current-feedback topology rather than a conventional voltage-feedback architecture. This distinction is important when designing the feedback network because the compensation resistor value materially affects bandwidth and stability. The circuit should follow the feedback and decoupling guidance in the Texas Instruments OPA2677 datasheet rather than applying the resistor selection practices used for a voltage-feedback amplifier without verification.

Typical applications include xDSL line drivers, power-line modem transmitters, video-driver interfaces, high-speed signal conditioners, and communications equipment requiring a dual amplifier with broad bandwidth. The OPA2677 family is also available in SO-8, QFN-16, and HSOP-8 PowerPAD configurations, allowing engineers to select a package according to routing density, thermal requirements, and assembly capability.

For a robust implementation, place input, output, and decoupling connections close to the device, verify stability across the full gain and load range, and confirm that the selected external feedback components remain appropriate for the operating frequency. Output-current demand and source/sink capability should be checked against the intended line load rather than inferred from bandwidth alone.

This product page combines the exact orderable MPN, package information, application positioning, verified pricing structure, and engineering-focused selection guidance. It also distinguishes true same-footprint drop-in choices from family members that use a different package, helping PCB designers avoid replacements that require layout changes.

Bộ thay thế dễ dàng lắp đặt cho OPA2677T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với OPA2677T (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Package.

Texas Instruments
Amplifier Type: Current-feedback operational amplifier
Package: 8-pin SOIC
So sánh với OPA2677T →

OPA2677U

✅ Drop-In
Texas Instruments
📦 16-SOIC
Current-feedback operational amplifier · 2 channels · SpeedPlus dual operational amplifier · DSL/PLC line driver · 8-pin SOIC · Surface mount · Wideband · High output current

Liên hệ để biết giá

Xem tài liệu →

OPA2677H

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-SOIC
Intermediate temperature grade replaces the extended-temperature OPA2677T grade; the dual current-feedback amplifier, 220 MHz bandwidth, and 16-SOIC footprint remain compatible.

📋 Tham chiếu thay thế (không có trong danh mục)

OPA2677T Tỷ lệ tối đa & tính chất điện

Amplifier Type Dual current-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 220 MHz
Unity-Gain Stable Yes
Maximum Total Supply Voltage 24 V (±12 V operation)
Input Offset Voltage 5300 uV maximum
Transconductance Bandwidth 2 GHz
Hộp 16-SOIC, PDSO16
Kiểu lắp đặt Surface mount
Trạng thái RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Hướng dẫn cấu hình chân OPA2677T 16-soic, pdso16

Cấu hình chân cho OPA2677T (16-soic, pdso16 gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 16-soic, pdso16 cho OPA2677T

Không có dữ liệu chân cụ thể sẵn có cho OPA2677T.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

OPA2677T phù hợp cho 6 Áp dụngs: xDSL Line Drivers, PLC Modem Transmitters, Wideband Video Signal Conditioning, High-Speed Communications Buffers, Industrial Test Signal Drivers, Power and Signal-Control Interfaces.

🌐

xDSL Line Drivers

The OPA2677T is well matched to xDSL line-driving circuits because it combines dual channels, 220 MHz gain-bandwidth performance, unity-gain stability, and high output-current capability. According to the Texas Instruments OPA2677 product page, the family is intended for xDSL applications where broadband signal integrity and load-driving strength are both important. Place the amplifier in the transmitter signal path and use the manufacturer-recommended feedback network. Verify output swing and current against the line-driver load because bandwidth alone does not establish suitability for every transformer or termination network.

📡

PLC Modem Transmitters

OPA2677T suits power-line modem transmitters that require a wideband differential signal path and substantial output-drive capability. The Texas Instruments OPA2677 datasheet identifies high output current and low distortion as key requirements for PLC line driving, while the 220 MHz bandwidth supports fast signal transitions. Use the dual channels for complementary transmit paths when the circuit topology permits, and route the feedback and decoupling networks for minimal parasitic effects. Confirm the load, output compliance, and thermal margin before production release.

📺

Wideband Video Signal Conditioning

The OPA2677T can condition wideband signals when the required closed-loop bandwidth remains within its 220 MHz gain-bandwidth capability and the load does not exceed the output-current limits. Its current-feedback architecture supports high-speed operation, but the feedback resistor must be selected using the OPA2677 guidance rather than generic op-amp practice. Keep input and feedback paths short to reduce parasitic feedback and ringing. Verify video timing, output swing, and stability with the actual source and termination impedance.

🌐

High-Speed Communications Buffers

OPA2677T can serve as a high-speed communications buffer where a dual wideband amplifier, unity-gain stability, and strong output drive are required. The 16-SOIC package provides separate amplifier channels for signal conditioning and impedance isolation, while the 220 MHz bandwidth supports demanding data paths. Select the feedback network from the manufacturer’s recommended values for the intended gain and load. Check output voltage swing, current margin, and channel behavior with realistic source and termination impedances.

🏭

Industrial Test Signal Drivers

OPA2677T is appropriate for industrial test and measurement front ends that need to drive high-bandwidth loads while maintaining a stable, low-distortion signal. Its dual-channel arrangement can support complementary or sequential test functions, and unity-gain stability simplifies direct buffer implementations. Because the current-feedback topology is sensitive to the feedback network and load, reproduce the manufacturer reference configuration before changing gain. Validate output compliance, source and sink current, temperature rise, and long-term stability across the instrument bandwidth.

⚡

Power and Signal-Control Interfaces

OPA2677T can be used in fast power-control and signal-control interfaces where a wideband amplifier must drive an analog network or supervisory circuit. The 220 MHz bandwidth and high output-current capability provide ample closed-loop speed for low-frequency control tasks and short transient events. Place output and feedback connections close to the device, maintain a low-impedance supply path, and decouple the rails near the package. Confirm that transient output current remains inside the device limits and that thermal conditions do not compromise signal accuracy.

Tóm tắt các sản phẩm được đề xuất

OPA2677U Texas Instruments Được sử dụng trong: xDSL Line Drivers, High-Speed Communications Buffers, Power and Signal-Control Interfaces OPA2677IRGV Same OPA2677 family in a QFN-16 configuration Được sử dụng trong: xDSL Line Drivers, Wideband Video Signal Conditioning, Industrial Test Signal Drivers OPA2677H Related OPA2677 amplifier family option Được sử dụng trong: PLC Modem Transmitters, Wideband Video Signal Conditioning, Industrial Test Signal Drivers OPA2677T Texas Instruments Được sử dụng trong: PLC Modem Transmitters OPA2674 Related Texas Instruments operational-amplifier family Được sử dụng trong: High-Speed Communications Buffers OPA2604AU Related operational-amplifier family considered during redesign Được sử dụng trong: Power and Signal-Control Interfaces
What is the OPA2677T?
The OPA2677T is a dual, wideband, current-feedback operational amplifier from Texas Instruments designed primarily for xDSL and PLC line-driver applications. According to the Texas Instruments OPA2677 datasheet, it offers 220 MHz gain-bandwidth performance, unity-gain stability, operation to ±12 V, and high output-current capability. The OPA2677T is the orderable 16-SOIC version of the OPA2677 family.
What are the key specifications of OPA2677T that engineers should know?
The OPA2677T combines two current-feedback amplifier channels, 220 MHz gain-bandwidth performance, unity-gain stability, and operation to ±12 V in a 16-SOIC package. According to the Texas Instruments OPA2677 datasheet, its key application strength is the combination of wide bandwidth and high output current for xDSL and power-line modem drivers. Its maximum input offset voltage is listed at 5300 uV.
Where can I download the OPA2677T datasheet PDF?
The OPA2677T datasheet is available through the Texas Instruments OPA2677 product page and the linked manufacturer documentation. The datasheet is the authoritative source for the pin description, recommended feedback network, electrical characteristics, supply-current behavior, output-current limits, and thermal information. The product page also identifies the available OPA2677 package options for SO-8, QFN-16, and HSOP-8 PowerPAD.
Where can I find the OPA2677T pinout?
The OPA2677T pin assignment is documented in the pin-configuration table of the Texas Instruments OPA2677 datasheet. The OPA2677T uses a 16-SOIC package, and each of its 16 positions must be checked against the selected OPA2677 orderable variant before PCB routing. Use the datasheet pin-description table when assigning supply, input, output, and feedback connections.
Is the OPA2677T suitable for xDSL and PLC line driving?
Yes, the OPA2677T is specifically positioned for xDSL and power-line modem line-driver circuits. According to the Texas Instruments OPA2677 product page, the family provides the high output current and low distortion required in these emerging line-driver applications. Its 220 MHz bandwidth and dual-channel configuration allow it to address wideband communications signal paths.
How does a current-feedback OPA2677T differ from a voltage-feedback op amp?
The OPA2677T uses current feedback rather than the voltage-feedback architecture found in many general-purpose op amps. According to the Texas Instruments OPA2677 datasheet, the recommended feedback resistor is an important part of the compensation network and affects stability and bandwidth. Do not copy a feedback-resistor value from an unrelated voltage-feedback amplifier without checking the OPA2677 design guidance.
What is the power dissipation concern when using the OPA2677T?
OPA2677T power dissipation depends on total supply voltage, output current, quiescent current, and ambient temperature. The device dissipates the difference between supply voltage and output voltage multiplied by load current, plus internal quiescent consumption. Check output-current demand against the datasheet limits and use the SOIC thermal information to determine whether copper area, airflow, or a different package option is necessary.
Where to buy OPA2677T online?
The OPA2677T can be requested through the Request a Quote form on this product page. The form is the appropriate channel for checking current availability, order quantity, and shipment timing for the exact 16-SOIC orderable MPN. Avoid substituting a different package suffix, because SO-8, QFN-16, HSOP-8, and 16-SOIC options have different board footprints.
What is the price of OPA2677T?
Current OPA2677T price and quantity breaks are presented through the Request a Quote form on this page. The form should be used for the exact OPA2677T orderable code and requested shipment quantity. Pricing can vary with volume, availability, and delivery conditions, so a firm quotation is more useful than a static figure for production planning.
What is the lead time for OPA2677T?
Request the current OPA2677T lead time through the Request a Quote form on this page. Include the required quantity, target shipment date, and whether additional production lots are needed. A lead-time response should apply specifically to the 16-SOIC OPA2677T orderable MPN rather than another package option in the OPA2677 family.
Is OPA2677T in stock?
Use the Request a Quote form on this page to request current OPA2677T inventory and a confirmed delivery schedule. The form can distinguish the exact 16-SOIC orderable part from related family configurations and provide a production-oriented response. Stock status can change, so confirm availability for the planned order quantity before releasing components into assembly.
OPA2677T vs OPA2677U - which should I choose?
Choose OPA2677T when the PCB requires the 16-SOIC footprint; the OPA2677U is associated with the smaller SO-8 option and therefore is not a pin-to-pin replacement for the same PCB. According to Texas Instruments product information, the OPA2677 family is offered in multiple packages. Select by package footprint first, then confirm electrical limits, temperature grade, and required production quantities.
OPA2677T vs OPA2604AU - which is better for a line-driver circuit?
OPA2677T is the better match when the design requires a dual, 220 MHz current-feedback amplifier in a 16-SOIC package for xDSL or PLC line driving. The OPA2604AU belongs to a different amplifier family and package context, so it should not be assumed to be a drop-in replacement. Compare bandwidth, output-current capability, feedback-network requirements, supply range, distortion, and footprint before selecting an alternative.
When should I choose OPA2677T over OPA2677U?
Choose OPA2677T over OPA2677U when the existing PCB has a 16-SOIC footprint, requires two high-speed channels, or benefits from the higher-current drive capability needed by xDSL and PLC line-driver circuitry. Choose OPA2677U only when its SO-8 footprint and electrical characteristics fit the design. Package compatibility is mandatory because the two options cannot share the same PCB land pattern.
Is OPA2677T suitable for high-speed signal conditioning?
The OPA2677T is suitable for high-speed signal-conditioning stages that operate within its bandwidth, output-current, supply-voltage, and stability limits. Its 220 MHz gain-bandwidth performance and unity-gain stability support wideband closed-loop designs, while the current-feedback topology requires a carefully selected feedback network. Validate gain, output swing, load, and stability across the complete signal range.
What is the best drop-in replacement for OPA2677T?
No verified 16-SOIC, pin-to-pin drop-in replacement for OPA2677T is established by the available cross-reference results. The OPA2677U uses a different SO-8 footprint, and the OPA2604AU is not demonstrated as a pin-compatible substitute. Use the Request a Quote form for supply of the exact OPA2677T, and require manufacturer pin-compatibility documentation before approving any replacement.
Can OPA2677U replace OPA2677T?
No, OPA2677U cannot directly replace OPA2677T on the same PCB because their packages differ: OPA2677T uses 16-SOIC while OPA2677U is associated with the SO-8 option. A circuit redesign is required to use the smaller package. Verify the complete pin assignment, supply range, output-current capability, and feedback requirements before making that conversion.
What is the best Analog Devices equivalent for OPA2677T?
No Analog Devices cross-brand part is established as a verified drop-in equivalent for OPA2677T. A valid substitution must match the 16-SOIC footprint, pin assignment, dual-channel configuration, current-feedback architecture, bandwidth, output-current capability, and supply range. Treat a same-package amplifier as a candidate only after comparing the manufacturer datasheets and validating stability and distortion in the target circuit.

Dữ liệu tham khảo kỹ thuật cho OPA2677T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose OPA2677T when the PCB requires a 16-SOIC dual current-feedback amplifier and the application needs wide bandwidth, strong output drive, or xDSL and PLC line-driver capability. Choose OPA2677U only for a redesigned board that can accommodate the smaller SO-8 footprint. OPA2677IRGV is relevant when a QFN-16 family implementation is preferred, while the HSOP-8 PowerPAD configuration can help thermal design when a PCB change is acceptable. OPA2604AU and OPA2674 are related amplifier options for design evaluation, not verified drop-in substitutes for the exact OPA2677T. For any substitution, check pin assignment, feedback topology, bandwidth versus gain, output-current capability, supply range, output swing, and stability with the final load before approving it.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Texas Instruments
Package 16-SOIC (PDSO16)
Amplifier Type Dual current-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 220 MHz
Transconductance Bandwidth 2 GHz
Unity-Gain Stable Yes
Maximum Total Supply Voltage 24 V (±12 V operation)
Maximum Input Offset Voltage 5300 uV
Primary Application xDSL and PLC line driving

Bảo phân biệt quan trọng

  • Purpose-built current-feedback architecture (vsOPA2677U)
  • Dedicated high-current line-driver performance (vsOPA2604AU)
  • Dual-channel wideband integration (vsOPA2674)

Ghi chú thiết kế

Route the OPA2677T feedback components directly between the amplifier output and its inverting input, with the shortest practical traces. Current-feedback amplifiers depend on the feedback impedance for stability, so extra trace resistance and capacitance can alter bandwidth or cause ringing. Keep the unused channel properly terminated according to the datasheet and avoid placing test pads or long stubs on high-impedance feedback nodes.

Place local supply-decoupling capacitors close to the device and follow the capacitance and placement recommendations in the Texas Instruments OPA2677 datasheet. Keep high-current output return paths separate from sensitive input and feedback traces to reduce ground bounce. Because the OPA2677T supports operation to ±12 V, verify the actual power-supply tolerance, startup sequence, and output-current demand before applying the maximum supply condition.

Do not use a feedback resistor selected for a voltage-feedback op amp without checking the OPA2677 current-feedback design guidance. Changes in source impedance, load, gain, and feedback resistance can affect closed-loop bandwidth and stability. Validate the amplifier with the final PCB, connector, cable, or line-network load, and check both source and sink current because wideband drive capability does not guarantee unlimited output-current capability.

Estimate SOIC temperature rise from actual supply voltage, output voltage, load current, and ambient temperature rather than bandwidth alone. The 16-SOIC package can be thermally constrained by its modest copper area and airflow. Reduce dissipation when possible by minimizing the output voltage drop, use generous ground-plane copper, and consider the family’s HSOP-8 PowerPAD option when the same electrical function can be redesigned around a different footprint.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No definitive compliance declarations were identified for the exact OPA2677T orderable MPN. Confirm the current material and environmental declarations with the manufacturer before production release.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

OPA2677T datasheet OPA2677T datasheet pdf OPA2677T pinout OPA2677T specifications OPA2677T 220MHz amplifier OPA2677T current feedback op amp OPA2677T 16-SOIC footprint OPA2677T xDSL line driver OPA2677T PLC amplifier OPA2677T vs OPA2677U OPA2677T replacement OPA2677T equivalent OPA2677T price OPA2677T stock Texas Instruments OPA2677T

Các bộ phận và thuật ngữ liên quan

Texas Instruments OPA2677T OPA2677 OPA2677U OPA2677H OPA2677IRGV OPA2674 OPA2604AU operational amplifier current-feedback amplifier CFB amplifier voltage-feedback amplifier SpeedPlus 220 MHz gain-bandwidth product unity-gain stability high output current DSL line driver xDSL PLC modem power-line communication 16-SOIC PDSO16 surface-mount package input offset voltage feedback network
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ