PCM1851APJT - 24-Bit 96kHz Stereo ADC with PGA | TI
MPN: PCM1851APJT ✓ Hoạt độngPCM1851APJT Tóm tắt
An audio ADC is a specialized data-converter IC that converts analog left- and right-channel audio signals into digital words for storage, processing, transmission, or playback. The PCM1851 belongs to the broader ADC and data-converter hierarchy, where its 24-bit resolution preserves fine signal detail, while its 96-kHz sampling rate supports audio-band conversion. Its multiplexed analog front end permits multiple stereo input sources to share one converter.
The PCM1850A/1851A family uses an advanced CMOS process and combines a single-ended analog front end, a 6-channel-per-side multiplexer, and a wide-range PGA in one 32-pin TQFP device. The PCM1851APJT is identified as a 24-bit, two-channel, 96-kHz converter with serial I2C control. These characteristics make it useful in DVD, CD, MD, recorder, and receiver designs where multiple analog sources must be selected digitally.
The 6-by-2 multiplexer is the central architectural feature. Instead of requiring a separate stereo ADC for every source pair, the converter can route selected left and right inputs to its analog-to-digital conversion channels. An external or internal control interface, depending on the system configuration, selects the active inputs, while the PGA allows the selected signal level to be adjusted before conversion. This approach reduces board area and system cost when several stereo sources share common conversion electronics.
Typical installations include consumer audio recorders, DVD and CD-compatible equipment, MD-based products, broadcast or receiver subsystems, and industrial instrumentation with multiple analog audio inputs. The mixed 5 V analog and 3.3 V digital supply architecture allows the analog converter section and digital interface to operate at appropriate voltage levels, but the PCB must keep analog and return currents separated appropriately.
Layout quality is central to achieving the converter's intended audio performance. Place the analog input routing and decoupling components close to their associated pins, use a continuous ground reference, and keep digital interface traces away from sensitive input paths. Follow the manufacturer datasheet for the complete pin description, recommended application circuit, supported supply combinations, and capacitor values rather than substituting generic high-frequency decoupling alone.
This product page consolidates the manufacturer feature description, package and interface information, verified market listings, drop-in family alternatives, and application-focused design guidance. It helps engineers identify the correct converter, distinguish package-orderable family members from a complete redesign, and plan PCB integration before analog, digital, and thermal implementation decisions are finalized.
Bộ thay thế dễ dàng lắp đặt cho PCM1851APJT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1851APJT (cùng hình factor và footprint) — khác nhau ở Package.
PCM1851APJTR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1851APJTG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1851PJT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1850APJT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1850APJTR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1851APJT Tỷ lệ tối đa & tính chất điện
| Converter Type | Stereo audio ADC |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of Channels | 2 channels |
| Input Multiplexer | 6-channel-per-side stereo multiplexer |
| Analog Input Architecture | Single-ended |
| Programmable Gain | Wide-range PGA |
| Control Interface | I2C serial interface |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Process Technology | Advanced CMOS |
| Hộp | 32-pin TQFP, 7 mm x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Data Format | 24-bit |
| Converter Family | PCM1850A/1851A |
| Application Category | Cost-sensitive audio recorder and receiver equipment |
| Supplier Package Description | 32-TQFP (7x7) |
Hướng dẫn cấu hình chân PCM1851APJT 32-tqfp (7x7)
Cấu hình chân cho PCM1851APJT (32-tqfp (7x7) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1851APJT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1851APJT phù hợp cho 6 Áp dụngs: Multichannel Audio Recorder, DVD Audio Front End, CD and MD Receiver System, Industrial Audio Test Equipment, Audio Interface and Mixer, Consumer Audio Acquisition Product.
Multichannel Audio Recorder
The PCM1851APJT fits multichannel recorder front ends because its 6-by-2 multiplexer can route several left- and right-channel sources into one 24-bit stereo conversion path. The 96-kHz sampling rate is appropriate for high-quality audio acquisition, while the PGA provides signal-level adjustment before conversion. A recorder can therefore consolidate multiple analog inputs without using a separate stereo ADC for every source pair. The practical benefit is lower board area and fewer active conversion devices, although source selection, clocking, and ground partitioning must follow the manufacturer reference design.
Được đề xuất
DVD Audio Front End
The PCM1851APJT is suitable for cost-sensitive DVD audio front ends that need 24-bit conversion at a 96-kHz sampling rate. Its single-ended analog input architecture can simplify source interfacing, and the multiplexed front end allows multiple stereo sources to share the converter when the product architecture benefits from consolidation. The 5 V analog and 3.3 V digital supplies match mixed-signal equipment designs. Layout must preserve analog signal paths and keep the digital I2C and data activity isolated from the converter inputs.
Được đề xuất
CD and MD Receiver System
The PCM1851APJT can serve as the analog acquisition element in CD- or MD-oriented receiver equipment where multiple stereo sources are multiplexed before a shared 24-bit, 96-kHz ADC. Its PGA helps accommodate differing source amplitudes, while I2C control supports integration into a system controller. The converter is especially relevant to compact consumer equipment that seeks audio performance without duplicating converter circuitry. Designers should validate the required input routing, clock source, and supported supply arrangement against the manufacturer application circuit.
Được đề xuất
Industrial Audio Test Equipment
The PCM1851APJT is a practical choice for industrial audio measurement equipment that must acquire several analog channels while retaining a 24-bit digital representation at up to 96 kHz. The 6-by-2 multiplexer reduces the number of converters needed when alternating between source pairs, and the PGA simplifies level conditioning. In an instrument, the serial interface can connect to a control processor or capture system. For reliable measurements, use clean references, isolated analog routing, and a ground implementation consistent with the PCM1850A/1851A reference circuit.
Được đề xuất
Audio Interface and Mixer
The PCM1851APJT can be used in a compact audio interface or mixer when several analog stereo inputs must feed a common digital processing chain. Its multiplexed input architecture permits source selection under digital control, and its 24-bit, 96-kHz conversion provides suitable resolution and bandwidth for high-quality audio workflows. The PGA offers an additional level-control stage ahead of conversion. Engineers should examine channel-selection timing and control sequencing to prevent clicks during switching, and use the manufacturer's recommended input filtering and grounding arrangements.
Được đề xuất
Consumer Audio Acquisition Product
The PCM1851APJT is well matched to consumer audio acquisition products that need a compact, multiplexed stereo ADC with digital control. The 32-pin 7 mm by 7 mm TQFP package supports space-constrained board layouts, and the 24-bit, 96-kHz conversion capability provides a clear upgrade path over lower-resolution audio converters. Mixed 5 V analog and 3.3 V digital rails align with many consumer platforms. To preserve performance, keep switched-source and digital traces away from sensitive analog inputs and derive the ground reference as shown in the manufacturer layout guidance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1851APJT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1851APJTR | PCM1851APJTG4 | PCM1851PJT | PCM1850APJT | PCM1850APJTR |
|---|---|---|---|---|---|---|
| Package | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Converter Function | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz |
| Input Multiplexer | 6-channel-per-side stereo multiplexer | PCM1851 family | PCM1851 family | PCM1851 family | PCM1850A/1851A family | PCM1850A/1851A family |
| Analog Supply | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Digital Supply | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Analog Input Architecture | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended |
| Programmable Gain Amplifier | Wide-range PGA | Wide-range PGA | Wide-range PGA | Wide-range PGA | PCM1850A/1851A family | PCM1850A/1851A family |
Bảo phân biệt quan trọng
- Multiplexed stereo input consolidation (vsPCM1850APJT)
- Exact package reuse without PCB changes (vsPCM1851APJTR)
- Same family electrical architecture (vsPCM1851PJT)
- Mixed-signal supply integration (vsPCM1850APJTR)
Ghi chú thiết kế
Use the manufacturer reference layout as the foundation for the analog front end. Route the six stereo input selections directly to their associated pins with minimal trace length, place analog input and supply bypass capacitors close to the device, and keep the I2C and data-clock traces away from sensitive input nodes. A continuous ground plane and a clearly separated analog and digital return path help prevent switching activity from adding errors to the converted audio signal.
Plan for separate 5 V analog and 3.3 V digital rails and follow the PCM1850A/1851A datasheet for their permitted operating combinations and decoupling values. Keep the analog regulator physically close to the converter's analog supply pins and avoid sharing high-current return paths with sensitive input references. Validate startup, shutdown, and rail-sequencing behavior in the final system because the converter is designed for a mixed 5 V analog and 3.3 V digital environment.
Treat the multiplexer outputs and selected analog inputs as high-impedance signal paths even though the converter includes a PGA. Use the manufacturer's recommended input filtering and grounding arrangement, terminate unused channels as directed by the datasheet, and keep clock and control activity away from the analog pins. When switching among six stereo source pairs, verify that gain settings and channel transitions do not introduce excessive settling time or audible transients.
Do not assume that every similarly suffixed orderable code is electrically and commercially interchangeable without checking the ordering table. For PCM1851APJT, PCM1851APJTR, PCM1851APJTG4, and PCM1851PJT, confirm temperature grade, lead finish, reel orientation, and lifecycle status. PCM1850-family alternatives require an additional functional review of channel selection, control behavior, and clock requirements even though they share the 32-pin TQFP format.
Thông tin tuân thủ
The manufacturer feature page confirms the PCM1850A/1851A family's process technology, supply architecture, package, and intended applications. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not included in the cited data and remain unknown.