PCM1851APJT - 24-Bit 96kHz Stereo ADC with PGA | TI
MPN: PCM1851APJT ✓ פעילPCM1851APJT סקירה
An audio ADC is a specialized data-converter IC that converts analog left- and right-channel audio signals into digital words for storage, processing, transmission, or playback. The PCM1851 belongs to the broader ADC and data-converter hierarchy, where its 24-bit resolution preserves fine signal detail, while its 96-kHz sampling rate supports audio-band conversion. Its multiplexed analog front end permits multiple stereo input sources to share one converter.
The PCM1850A/1851A family uses an advanced CMOS process and combines a single-ended analog front end, a 6-channel-per-side multiplexer, and a wide-range PGA in one 32-pin TQFP device. The PCM1851APJT is identified as a 24-bit, two-channel, 96-kHz converter with serial I2C control. These characteristics make it useful in DVD, CD, MD, recorder, and receiver designs where multiple analog sources must be selected digitally.
The 6-by-2 multiplexer is the central architectural feature. Instead of requiring a separate stereo ADC for every source pair, the converter can route selected left and right inputs to its analog-to-digital conversion channels. An external or internal control interface, depending on the system configuration, selects the active inputs, while the PGA allows the selected signal level to be adjusted before conversion. This approach reduces board area and system cost when several stereo sources share common conversion electronics.
Typical installations include consumer audio recorders, DVD and CD-compatible equipment, MD-based products, broadcast or receiver subsystems, and industrial instrumentation with multiple analog audio inputs. The mixed 5 V analog and 3.3 V digital supply architecture allows the analog converter section and digital interface to operate at appropriate voltage levels, but the PCB must keep analog and return currents separated appropriately.
Layout quality is central to achieving the converter's intended audio performance. Place the analog input routing and decoupling components close to their associated pins, use a continuous ground reference, and keep digital interface traces away from sensitive input paths. Follow the manufacturer datasheet for the complete pin description, recommended application circuit, supported supply combinations, and capacitor values rather than substituting generic high-frequency decoupling alone.
This product page consolidates the manufacturer feature description, package and interface information, verified market listings, drop-in family alternatives, and application-focused design guidance. It helps engineers identify the correct converter, distinguish package-orderable family members from a complete redesign, and plan PCB integration before analog, digital, and thermal implementation decisions are finalized.
חלופות תחליף ישיר עבור PCM1851APJT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PCM1851APJT (אותו גורם צורה וטביעת רגל) — שונים ב Package.
PCM1851APJTR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1851APJTG4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1851PJT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1850APJT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1850APJTR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1851APJT דירוגים מרביים ומאפיינים חשמליים
| Converter Type | Stereo audio ADC |
| רזולוציה | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of Channels | 2 channels |
| Input Multiplexer | 6-channel-per-side stereo multiplexer |
| Analog Input Architecture | Single-ended |
| Programmable Gain | Wide-range PGA |
| Control Interface | I2C serial interface |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Process Technology | Advanced CMOS |
| מארז | 32-pin TQFP, 7 mm x 7 mm |
| סוג הרכבה | Surface mount |
| Data Format | 24-bit |
| Converter Family | PCM1850A/1851A |
| Application Category | Cost-sensitive audio recorder and receiver equipment |
| Supplier Package Description | 32-TQFP (7x7) |
מדריך תצורת פינים של PCM1851APJT 32-tqfp (7x7)
תצורת פינים עבור PCM1851APJT (מארזת 32-tqfp (7x7)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור PCM1851APJT.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PCM1851APJT מתאים עבור 6 יישוםs: Multichannel Audio Recorder, DVD Audio Front End, CD and MD Receiver System, Industrial Audio Test Equipment, Audio Interface and Mixer, Consumer Audio Acquisition Product.
Multichannel Audio Recorder
The PCM1851APJT fits multichannel recorder front ends because its 6-by-2 multiplexer can route several left- and right-channel sources into one 24-bit stereo conversion path. The 96-kHz sampling rate is appropriate for high-quality audio acquisition, while the PGA provides signal-level adjustment before conversion. A recorder can therefore consolidate multiple analog inputs without using a separate stereo ADC for every source pair. The practical benefit is lower board area and fewer active conversion devices, although source selection, clocking, and ground partitioning must follow the manufacturer reference design.
מומלץ
DVD Audio Front End
The PCM1851APJT is suitable for cost-sensitive DVD audio front ends that need 24-bit conversion at a 96-kHz sampling rate. Its single-ended analog input architecture can simplify source interfacing, and the multiplexed front end allows multiple stereo sources to share the converter when the product architecture benefits from consolidation. The 5 V analog and 3.3 V digital supplies match mixed-signal equipment designs. Layout must preserve analog signal paths and keep the digital I2C and data activity isolated from the converter inputs.
מומלץ
CD and MD Receiver System
The PCM1851APJT can serve as the analog acquisition element in CD- or MD-oriented receiver equipment where multiple stereo sources are multiplexed before a shared 24-bit, 96-kHz ADC. Its PGA helps accommodate differing source amplitudes, while I2C control supports integration into a system controller. The converter is especially relevant to compact consumer equipment that seeks audio performance without duplicating converter circuitry. Designers should validate the required input routing, clock source, and supported supply arrangement against the manufacturer application circuit.
מומלץ
Industrial Audio Test Equipment
The PCM1851APJT is a practical choice for industrial audio measurement equipment that must acquire several analog channels while retaining a 24-bit digital representation at up to 96 kHz. The 6-by-2 multiplexer reduces the number of converters needed when alternating between source pairs, and the PGA simplifies level conditioning. In an instrument, the serial interface can connect to a control processor or capture system. For reliable measurements, use clean references, isolated analog routing, and a ground implementation consistent with the PCM1850A/1851A reference circuit.
מומלץ
Audio Interface and Mixer
The PCM1851APJT can be used in a compact audio interface or mixer when several analog stereo inputs must feed a common digital processing chain. Its multiplexed input architecture permits source selection under digital control, and its 24-bit, 96-kHz conversion provides suitable resolution and bandwidth for high-quality audio workflows. The PGA offers an additional level-control stage ahead of conversion. Engineers should examine channel-selection timing and control sequencing to prevent clicks during switching, and use the manufacturer's recommended input filtering and grounding arrangements.
מומלץ
Consumer Audio Acquisition Product
The PCM1851APJT is well matched to consumer audio acquisition products that need a compact, multiplexed stereo ADC with digital control. The 32-pin 7 mm by 7 mm TQFP package supports space-constrained board layouts, and the 24-bit, 96-kHz conversion capability provides a clear upgrade path over lower-resolution audio converters. Mixed 5 V analog and 3.3 V digital rails align with many consumer platforms. To preserve performance, keep switched-source and digital traces away from sensitive analog inputs and derive the ground reference as shown in the manufacturer layout guidance.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PCM1851APJT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PCM1851APJTR | PCM1851APJTG4 | PCM1851PJT | PCM1850APJT | PCM1850APJTR |
|---|---|---|---|---|---|---|
| Package | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) | 32-pin TQFP (7 mm x 7 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Converter Function | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz |
| Input Multiplexer | 6-channel-per-side stereo multiplexer | PCM1851 family | PCM1851 family | PCM1851 family | PCM1850A/1851A family | PCM1850A/1851A family |
| Analog Supply | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Digital Supply | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Analog Input Architecture | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended | Single-ended |
| Programmable Gain Amplifier | Wide-range PGA | Wide-range PGA | Wide-range PGA | Wide-range PGA | PCM1850A/1851A family | PCM1850A/1851A family |
מבדילים עיקריים
- Multiplexed stereo input consolidation (לעומתPCM1850APJT)
- Exact package reuse without PCB changes (לעומתPCM1851APJTR)
- Same family electrical architecture (לעומתPCM1851PJT)
- Mixed-signal supply integration (לעומתPCM1850APJTR)
הערות תכנון
Use the manufacturer reference layout as the foundation for the analog front end. Route the six stereo input selections directly to their associated pins with minimal trace length, place analog input and supply bypass capacitors close to the device, and keep the I2C and data-clock traces away from sensitive input nodes. A continuous ground plane and a clearly separated analog and digital return path help prevent switching activity from adding errors to the converted audio signal.
Plan for separate 5 V analog and 3.3 V digital rails and follow the PCM1850A/1851A datasheet for their permitted operating combinations and decoupling values. Keep the analog regulator physically close to the converter's analog supply pins and avoid sharing high-current return paths with sensitive input references. Validate startup, shutdown, and rail-sequencing behavior in the final system because the converter is designed for a mixed 5 V analog and 3.3 V digital environment.
Treat the multiplexer outputs and selected analog inputs as high-impedance signal paths even though the converter includes a PGA. Use the manufacturer's recommended input filtering and grounding arrangement, terminate unused channels as directed by the datasheet, and keep clock and control activity away from the analog pins. When switching among six stereo source pairs, verify that gain settings and channel transitions do not introduce excessive settling time or audible transients.
Do not assume that every similarly suffixed orderable code is electrically and commercially interchangeable without checking the ordering table. For PCM1851APJT, PCM1851APJTR, PCM1851APJTG4, and PCM1851PJT, confirm temperature grade, lead finish, reel orientation, and lifecycle status. PCM1850-family alternatives require an additional functional review of channel selection, control behavior, and clock requirements even though they share the 32-pin TQFP format.
מידע על תאימות
The manufacturer feature page confirms the PCM1850A/1851A family's process technology, supply architecture, package, and intended applications. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not included in the cited data and remain unknown.