Microchip Technology

PIC10F222-I/OT - 8-Bit 8MHz Flash MCU | Microchip Technology

MPN: PIC10F222-I/OT ✓ Hoạt động
SOT-23-6 Package 8 MHz Speed 768 bytes (512 x 12 bits) Memory
MOQ: 1 |

PIC10F222-I/OT Tóm tắt

The Microchip Technology PIC10F222-I/OT is an 8-bit, 8 MHz, Flash-based CMOS microcontroller with 768 bytes of program memory, 23 bytes of RAM, four I/O pins, and an 8-bit ADC in a 6-pin SOT-23 package. It combines a compact RISC architecture with 33 single-word instructions, most of which execute in one 1 µs cycle.

A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor die. The PIC10F222 belongs to the 8-bit microcontroller hierarchy within embedded processing and is intended for compact control, sensing, and automation products. Its fully static Flash-based design permits applications that require low-cost re-programming and deterministic operation across changing control tasks.

Key device characteristics include 768 bytes of Flash program memory organized as 512 words by 12 bits, 23 bytes of data RAM, four general-purpose I/O pins, and an 8-bit ADC. The MCU operates at up to 8 MHz and uses a RISC instruction set containing 33 single-word instructions. Program branches require two cycles, while the other listed instructions complete in one cycle.

The device architecture supports simple embedded control without requiring a separate processor, external program-memory interface, or large package. Four I/O pins provide the physical interface for sensors, switches, indicators, actuators, and control logic. The integrated ADC allows an analog input to be digitized by firmware, supporting applications such as threshold monitoring and proportional control without requiring a separate converter.

Typical uses include compact temperature controls, simple motor controllers, battery-powered sensing nodes, industrial switch modules, appliance interfaces, and educational embedded-control platforms. The small SOT-23-6 package supports dense PCB layouts, while the limited I/O and memory footprint favors focused designs rather than gateway-level connectivity or high-bandwidth processing.

Designers should confirm the complete pin assignment, programming configuration, clock arrangement, and peripheral limitations in the manufacturer datasheet before layout release. Keep the PCB footprint and pin numbering compatible with the selected SOT-23-6 variant, and validate startup behavior across the intended supply-voltage and temperature conditions.

This product record combines the manufacturer’s device description with practical sourcing guidance, application fit, compatibility considerations, and engineering-oriented selection notes. It helps designers distinguish the PIC10F222-I/OT from related configuration and package-ordering variants before committing a compact embedded-control board to production.

Bộ thay thế dễ dàng lắp đặt cho PIC10F222-I/OT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC10F222-I/OT (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Architecture, Data Memory, Instruction Set, RoHS Status.

Microchip Technology
Operating Temperature Range: -40°C to +125°C
Architecture: RISC
Data Memory: 23 bytes
Microchip Technology
Operating Temperature Range: -40 °C to +85 °C (Industrial, "I")
Instruction Set: 33 single-word/single-cycle (excluding branches)
RoHS Status: Compliant

PIC10F222T-I/OT

✅ Drop-In
Microchip Technology
📦 SOT-23-6
8-bit PIC10 RISC · Flash · 768 B (512 x 12 words) · 16 B · 0 B (no on-chip EEPROM) · 8 MHz (4 MIPS at 4 MHz instruction rate) · 4 (GP0, GP1, GP2, GP3 open-drain input-only)

Liên hệ để biết giá

Xem tài liệu →

PIC10F222-E/OT

✅ Drop-In
Microchip Technology
📦 SOT-23-6
8-bit fully static Flash-based CMOS microcontroller · 8 MHz · 768 bytes (512 x 12 bits) · 23 bytes · 4 lines · RISC · 33 single-word instructions · 1 µs

Liên hệ để biết giá

Xem tài liệu →

PIC10F222TI/OT

✅ Drop-In
📦 SOT-23-6
Same compact 8-bit PIC10F222-class device in SOT-23-6, with order-code notation differing from PIC10F222-I/OT; configuration and markings require verification.

📋 Tham chiếu thay thế (không có trong danh mục)

PIC10F222-I/OT Tỷ lệ tối đa & tính chất điện

Microcontroller Type 8-bit Flash-based CMOS microcontroller
Tần số xung maksimum 8 MHz
Program Memory 768 bytes (512 x 12 bits)
Data Memory 23 bytes RAM
General-Purpose I/O Pins 4 pins
ADC Resolution 8 bits
Instruction Set 33 single-word RISC instructions
Typical Instruction Cycle 1 µs
Program Branch Cycle 2 cycles
Hộp SOT-23-6
Kiểu lắp đặt Surface mount
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
Architecture Fully static RISC
Trạng thái RoHS unknown
REACH Status unknown

Hướng dẫn cấu hình chân PIC10F222-I/OT sot-23-6

Cấu hình chân cho PIC10F222-I/OT (sot-23-6 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân sot-23-6 cho PIC10F222-I/OT

Không có dữ liệu chân cụ thể sẵn có cho PIC10F222-I/OT.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PIC10F222-I/OT phù hợp cho 6 Áp dụngs: Compact Temperature Control Module, Small Motor and Actuator Controller, Battery-Powered Sensor Node, Industrial Switch and Relay Module, Appliance Control Board, Digital Control and Learning Platform.

🌡️

Compact Temperature Control Module

The PIC10F222-I/OT fits a compact temperature-control module that reads an analog temperature signal, evaluates a threshold, and switches a heater or cooling relay. Its 8-bit ADC converts the sensor voltage for firmware processing, while four I/O pins provide the control output, status indication, and configuration inputs. The 768-byte Flash memory supports a short control loop, hysteresis state machine, calibration constants, and communication routines. At an 8 MHz maximum clock, the MCU provides deterministic instruction timing for frequent sensor reads. The SOT-23-6 package also conserves PCB area in a DIN-rail or panel-mounted control assembly. Before layout, verify the ADC input, I/O direction, power pins, and configuration requirements in the manufacturer pin-description table.

⚙️

Small Motor and Actuator Controller

The PIC10F222-I/OT can serve as the controller in a small motor, solenoid, or actuator module where the control sequence is compact. Its four I/O pins can drive discrete transistor stages, read limit or feedback switches, and operate an indicator, while the RISC processor executes the state machine using 23 bytes of RAM. The 8-bit ADC is useful when the actuator requires analog feedback, such as a position or current sense signal. With a maximum clock of 8 MHz, timing loops and debounce routines remain practical for inexpensive motor systems. Designers should account for inductive transients, supply droop, and grounding because the SOT-23-6 footprint has limited thermal and pin breakout area. Check output-drive limits and timing assumptions in the manufacturer datasheet before adding loads.

🔋

Battery-Powered Sensor Node

The PIC10F222-I/OT is appropriate for a small battery-powered sensing node that periodically measures an analog quantity and drives a low-power output. Its 8-bit ADC handles the measurement, 768-byte Flash stores compact acquisition and threshold routines, and 23 bytes of RAM supports short working buffers. Four I/O pins permit a sensor input, wake or trigger signal, status LED, and power-control function. The fully static architecture allows firmware to remain idle between events, although actual sleep current and wake-up performance must be established from the manufacturer data sheet. The SOT-23-6 package helps reduce board area in wearable, appliance, or environmental-monitoring products. Validate battery impedance, sensor noise, ADC acquisition timing, and low-power behavior across the intended temperature range.

🏭

Industrial Switch and Relay Module

The PIC10F222-I/OT works well in a DIN-rail or wall-mounted switch module that translates a simple command into controlled output switching. Four I/O pins can support a pushbutton input, indicator LED, relay-control output, and status or interlock signal. Its 8-bit ADC can supervise an analog feedback or supply condition, while the 33-instruction RISC architecture keeps the firmware responsive without requiring a high-performance processor. The -I ordering is identified for operation from -40 °C to +85 °C, making it relevant to industrial environments when the complete assembly also satisfies its own temperature requirements. Relay drivers, isolation, flyback protection, and creepage must be designed around the MCU rather than assumed. Use the manufacturer electrical limits to define safe logic thresholds and switching delays.

🏠

Appliance Control Board

The PIC10F222-I/OT is suitable for a small appliance control board that coordinates a button panel, indicator, heater, or fan through a compact embedded program. The 8 MHz maximum operating speed supports responsive state management, while 768 bytes of Flash accommodates control logic and a modest lookup table. The four I/O pins limit the board to focused appliance functions rather than extensive direct wiring; a higher-pin-count device may be preferable when many front-panel inputs are required. The integrated 8-bit ADC can monitor a pot, temperature element, or supply level. SOT-23-6 packaging supports dense, cost-sensitive layouts. Engineers should verify startup pin states, ADC input behavior, and brownout conditions in the manufacturer documentation, and should provide local decoupling close to the power pins.

🧩

Digital Control and Learning Platform

The PIC10F222-I/OT provides a practical platform for digital control experiments, teaching boards, and small embedded prototypes. Its RISC core uses only 33 single-word instructions, most executing in one cycle, so beginners can study register-level control, timers, interrupts, and ADC conversion without a complex development architecture. Four I/O pins support LEDs, switches, and an analog input demonstration, while 768 bytes of program memory allows focused examples and compact user routines. The SOT-23-6 footprint is easy to place on a compact training PCB, although its six-terminal package requires careful footprint and orientation checks. For teaching applications, include a programming connector, stable supply, and accessible test points. Confirm programming mode pins and the final flash-programming workflow from the official documentation.

Tóm tắt các sản phẩm được đề xuất

PIC10F222 Base family device Được sử dụng trong: Compact Temperature Control Module, Small Motor and Actuator Controller, Battery-Powered Sensor Node, Industrial Switch and Relay Module, Appliance Control Board, Digital Control and Learning Platform PIC10F220 Related family device documented with PIC10F222 Được sử dụng trong: Compact Temperature Control Module, Appliance Control Board PIC10F202T-E/OT Microchip Technology Được sử dụng trong: Small Motor and Actuator Controller PIC10F322T-I/OT Related PIC10 controller comparison Được sử dụng trong: Battery-Powered Sensor Node PIC10F222T-I/OT Microchip Technology Được sử dụng trong: Industrial Switch and Relay Module, Digital Control and Learning Platform
What is the operating voltage of PIC10F222-I/OT?
The PIC10F222-I/OT operates from a manufacturer-specified supply-voltage range that is confirmed in the Microchip PIC10F220/222 data sheet. The device is packaged for a -40 °C to +85 °C operating range and uses an 8 MHz maximum clock. Before designing the power rail, check the data sheet’s recommended operating conditions and electrical-characteristics tables against the board’s minimum, nominal, and maximum supply voltage.
What are the key specifications of PIC10F222-I/OT that engineers should know?
The PIC10F222-I/OT is an 8-bit, fully static, Flash-based CMOS microcontroller with an 8 MHz maximum clock. It provides 768 bytes of program memory, organized as 512 words by 12 bits, plus 23 bytes of RAM, four I/O pins, and an 8-bit ADC. Its RISC architecture contains 33 single-word instructions; typical instructions execute in one cycle, while program branches require two cycles. The device is offered in a compact SOT-23-6 surface-mount package.
Where can I download the PIC10F222 datasheet PDF?
The official PIC10F220/222 data sheet is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/40001270F.pdf. Use the manufacturer document for the authoritative pin descriptions, electrical limits, memory organization, ADC characteristics, timing information, programming connections, and package drawings. The Microchip product page for PIC10F222 is also available at https://www.microchip.com/en-us/product/PIC10F222.
Where can I find the PIC10F222-I/OT pinout?
The PIC10F222-I/OT pinout is documented in the Microchip PIC10F220/222 data sheet, using the manufacturer’s SOT-23-6 package drawing and pin-description table. Use that table when assigning VDD, VSS, programming, I/O, reset, and analog-input functions to PCB tracks. The SOT-23-6 outline is represented on this page by the sot-23-6 package key, but the manufacturer pin-description table remains the controlling reference for signal names and directions.
How much Flash memory and RAM does PIC10F222-I/OT have?
The PIC10F222-I/OT contains 768 bytes of Flash program memory, organized as 512 words by 12 bits, and 23 bytes of data RAM. Its RISC instruction set includes 33 single-word instructions, with typical execution in one cycle and program branches in two cycles. These resources suit compact control routines, sensor sampling, state-machine logic, and small communication or timing tasks rather than storage-heavy applications.
Can PIC10F222-I/OT be used for PWM applications?
The PIC10F222-I/OT can be used in PWM-related designs when its available peripherals, timer resources, and I/O routing satisfy the application. The device is an 8-bit MCU operating up to 8 MHz, with four I/O pins and 23 bytes of RAM. The manufacturer data sheet and device programming documentation should be checked for the exact PWM module, timer channels, output pins, and configuration requirements before finalizing the circuit.
What can replace PIC10F222-I/OT on the same PCB?
The closest documented replacement is PIC10F222T-I/OT, which uses the same SOT-23-6 device family and is listed as an 8-bit, 8 MHz, 768-byte Flash microcontroller. PIC10F222-E/OT is another same-package family candidate, but its temperature-grade and ordering-code details must be checked before substitution. Confirm the exact pinout, configuration words, memory requirements, timing, and operating-temperature range rather than relying on package name alone.
Is PIC10F222-I/OT suitable for a compact sensor node?
The PIC10F222-I/OT is suitable for a compact sensor node when the design needs one analog input, limited digital control, and compact program memory. It provides an 8-bit ADC, four I/O pins, 768 bytes of Flash memory, and 23 bytes of RAM in SOT-23-6. This combination works well for threshold sensing, simple filtering, switch control, and low-duty-cycle measurements where the application does not require extensive data buffering or networking.
PIC10F222-I/OT vs PIC10F222-E/OT: which is better?
PIC10F222-I/OT is the better choice when the product must cover the -40 °C to +85 °C industrial temperature range identified for the -I ordering, while PIC10F222-E/OT represents a different temperature-grade option. Both belong to the same PIC10F222 family and use a 6-pin SOT-23 format, but ordering suffixes must not be substituted without checking the manufacturer ordering table, device markings, temperature limits, and qualification requirements.
When should I choose PIC10F222-I/OT over PIC10F222T-I/OT?
Choose PIC10F222-I/OT when the specified commercial ordering code and its associated SOT-23-6 configuration match the BOM, while PIC10F222T-I/OT may be used when that explicit manufacturer ordering code is required. Both devices are associated with the same 8-bit, 8 MHz, 768-byte Flash family and SOT-23-6 package. Because ordering nomenclature can encode temperature and package attributes, reconcile the exact suffix, pinout, and marking against the manufacturer documentation before release.
Is PIC10F222-I/OT the same as PIC10F222TI/OT?
PIC10F222-I/OT and PIC10F222TI/OT should not be treated as automatically identical without checking their order codes. The SOT-23-6 family is compact, and the listed variants share the PIC10F222 device identity, but suffix characters may identify temperature grade, package form, and shipment configuration. Verify the exact ordering information, pin compatibility, operating range, and marking rules in Microchip’s product documentation before using one as a replacement for the other.
What is the best Microchip equivalent for PIC10F222-I/OT?
PIC10F222T-I/OT is the closest same-brand, same-package candidate documented for direct consideration because it is listed as an 8-bit, 8 MHz MCU with 768 bytes of Flash in SOT-23-6. It should be treated as a candidate rather than an automatic substitution until the exact order code, configuration words, temperature range, and PCB pin mapping are confirmed. No verified cross-brand drop-in equivalent was established for this device.
Where can I buy PIC10F222-I/OT and request current pricing?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for PIC10F222-I/OT. The structured commercial data on this page does not contain a qualifying current quantity-break table, so no static unit price is published here. Include your target quantity, packaging preference, and required delivery location in the quote request.
Is PIC10F222-I/OT in stock and what is its lead time?
Current inventory and lead time for PIC10F222-I/OT should be confirmed through the Request a Quote form on this page. One distributor search result lists inventory information, but listings can change rapidly and may represent a different quantity, package code, or regional stock pool. Provide the required quantity and shipment destination so procurement can return a current availability commitment rather than an outdated listing indication.
What is the price of PIC10F222-I/OT?
The current price of PIC10F222-I/OT is available through the Request a Quote form on this page. Pricing depends on order quantity, shipment method, regional availability, and packaging requirements, so a static figure would not reliably represent current commercial terms. Submit the requested quantity and destination to obtain a quote for the exact MPN PIC10F222-I/OT.
Does PIC10F222-I/OT meet RoHS and REACH requirements?
The RoHS and REACH status of PIC10F222-I/OT should be confirmed from Microchip’s current product declarations for the exact order code. The device is an 8-bit, 8 MHz Flash MCU in SOT-23-6 with a -40 °C to +85 °C operating range, but package and temperature variants can have separate declaration records. Request the current material compliance statement for the exact MPN before treating it as compliant in a purchasing or product-release process.

Dữ liệu tham khảo kỹ thuật cho PIC10F222-I/OT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PIC10F222-I/OT for compact embedded-control products that need an 8-bit Flash MCU, one 8-bit ADC channel, four I/O pins, and operation across the identified -40 °C to +85 °C range. Its 768-byte program memory and 23-byte RAM are sufficient for focused sensing, threshold control, and simple state-machine functions, but not for complex networking or large data processing. PIC10F222T-I/OT is the closest same-package ordering candidate when that exact manufacturer code and configuration satisfy the BOM; confirm marking and suffix semantics. PIC10F222-E/OT may fit a less demanding temperature environment, while PIC10F222TI/OT should be selected only after its exact ordering information is reconciled. No verified cross-brand drop-in equivalent was established, so any MCU migration requires a new package, pinout, toolchain, and firmware-qualification review rather than a simple board substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này PIC10F222T-I/OT PIC10F222-E/OT PIC10F222TI/OT
Package SOT-23-6 SOT-23-6 SOT-23-6 SOT-23-6
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit RISC 8-bit PIC 10F microcontroller 8-bit PIC 10F family 8-bit PIC 10F family

Bảo phân biệt quan trọng

  • Compact integrated sensing and control (vsPIC10F222-E/OT)
  • Documented -I temperature-grade positioning (vsPIC10F222-E/OT)
  • Eight-megahertz operation in a six-pin package (vsPIC10F222TI/OT)

Ghi chú thiết kế

Reserve the manufacturer-specified SOT-23-6 land pattern and maintain the correct pin-1 orientation before routing power, programming, and I/O signals. Place the decoupling capacitor close to VDD and VSS so switching-current paths do not share long traces with the analog input or sensitive control nets. Because the package has only six terminals, assign pins according to the data-sheet pin-description table and avoid assumptions based only on similar PIC10 devices.

Do not treat PIC10F222-I/OT, PIC10F222T-I/OT, and PIC10F222-E/OT as automatically interchangeable. The ordering suffixes can distinguish temperature grade, package form, and shipment configuration. Reconcile the exact MPN with the manufacturer ordering table, confirm that the programmed configuration words match, and verify that the PCB footprint matches the selected suffix before substituting any part or approving a first article.

Keep the 8-bit ADC path away from switching nodes, relay drivers, motor outputs, and fast digital edges. Use a compact ground return and place analog filtering components near the controller where practical. If the ADC monitors a resistive sensor, minimize leakage from adjacent pins and guard the input according to the device recommendations. Validate the complete signal path on hardware because the device has only four I/O pins and limited routing flexibility.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Current material-compliance declarations for the exact PIC10F222-I/OT order code were not included. Obtain the applicable Microchip declarations before treating the part as RoHS, REACH, lead-free, halogen-free, conflict-minerals compliant, or AEC-Q100 qualified.

Tìm kiếm liên quan

PIC10F222 datasheet PIC10F222 pdf PIC10F222 pwm PIC10F222-I/OT datasheet PIC10F222-I/OT pinout PIC10F222-I/OT equivalent PIC10F222-I/OT replacement PIC10F222-I/OT footprint PIC10F222-I/OT price PIC10F222-I/OT stock Microchip PIC10F222-I/OT PIC10F222-I/OT vs PIC10F222-E/OT

Các bộ phận và thuật ngữ liên quan

Microchip Technology PIC10F222-I/OT PIC10F222 PIC10F220 PIC10F222T-I/OT PIC10F222-E/OT PIC10F222TI/OT PIC10F202T-E/OT PIC10F322T-I/OT 8-bit microcontroller RISC architecture Flash memory CMOS microcontroller embedded control SOT-23-6 SOT-23 package family surface-mount package 8-bit ADC program memory data RAM general-purpose I/O industrial control battery-powered sensor node RoHS REACH AEC-Q100
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ