PIC10F222-I/OT - 8-Bit 8MHz Flash MCU | Microchip Technology
料号: PIC10F222-I/OT ✓ 量产中PIC10F222-I/OT 概述
A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor die. The PIC10F222 belongs to the 8-bit microcontroller hierarchy within embedded processing and is intended for compact control, sensing, and automation products. Its fully static Flash-based design permits applications that require low-cost re-programming and deterministic operation across changing control tasks.
Key device characteristics include 768 bytes of Flash program memory organized as 512 words by 12 bits, 23 bytes of data RAM, four general-purpose I/O pins, and an 8-bit ADC. The MCU operates at up to 8 MHz and uses a RISC instruction set containing 33 single-word instructions. Program branches require two cycles, while the other listed instructions complete in one cycle.
The device architecture supports simple embedded control without requiring a separate processor, external program-memory interface, or large package. Four I/O pins provide the physical interface for sensors, switches, indicators, actuators, and control logic. The integrated ADC allows an analog input to be digitized by firmware, supporting applications such as threshold monitoring and proportional control without requiring a separate converter.
Typical uses include compact temperature controls, simple motor controllers, battery-powered sensing nodes, industrial switch modules, appliance interfaces, and educational embedded-control platforms. The small SOT-23-6 package supports dense PCB layouts, while the limited I/O and memory footprint favors focused designs rather than gateway-level connectivity or high-bandwidth processing.
Designers should confirm the complete pin assignment, programming configuration, clock arrangement, and peripheral limitations in the manufacturer datasheet before layout release. Keep the PCB footprint and pin numbering compatible with the selected SOT-23-6 variant, and validate startup behavior across the intended supply-voltage and temperature conditions.
This product record combines the manufacturer’s device description with practical sourcing guidance, application fit, compatibility considerations, and engineering-oriented selection notes. It helps designers distinguish the PIC10F222-I/OT from related configuration and package-ordering variants before committing a compact embedded-control board to production.
直接替换替代料: PIC10F222-I/OT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC10F222-I/OT (相同外形与封装尺寸) ——差异在于 Operating Temperature Range, Architecture, Data Memory, Instruction Set, RoHS Status.
PIC10F222T-I/OT
✅ 直接替换联系询价
查看数据手册 →PIC10F222-E/OT
✅ 直接替换联系询价
查看数据手册 →PIC10F222TI/OT
✅ 直接替换📋 参考替代料(不在目录中)
PIC10F222-I/OT 最大额定值与电气特性
| Microcontroller Type | 8-bit Flash-based CMOS microcontroller |
| 最大时钟频率 | 8 MHz |
| Program Memory | 768 bytes (512 x 12 bits) |
| Data Memory | 23 bytes RAM |
| General-Purpose I/O Pins | 4 pins |
| ADC Resolution | 8 bits |
| Instruction Set | 33 single-word RISC instructions |
| Typical Instruction Cycle | 1 µs |
| Program Branch Cycle | 2 cycles |
| 封装 | SOT-23-6 |
| 安装类型 | Surface mount |
| 工作温度范围 | -40 °C to +85 °C |
| Architecture | Fully static RISC |
| RoHS 状态 | unknown |
| REACH Status | unknown |
PIC10F222-I/OT sot-23-6 引脚配置指南
PIC10F222-I/OT(sot-23-6 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC10F222-I/OT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC10F222-I/OT 适用于 6 应用s: Compact Temperature Control Module, Small Motor and Actuator Controller, Battery-Powered Sensor Node, Industrial Switch and Relay Module, Appliance Control Board, Digital Control and Learning Platform.
Compact Temperature Control Module
The PIC10F222-I/OT fits a compact temperature-control module that reads an analog temperature signal, evaluates a threshold, and switches a heater or cooling relay. Its 8-bit ADC converts the sensor voltage for firmware processing, while four I/O pins provide the control output, status indication, and configuration inputs. The 768-byte Flash memory supports a short control loop, hysteresis state machine, calibration constants, and communication routines. At an 8 MHz maximum clock, the MCU provides deterministic instruction timing for frequent sensor reads. The SOT-23-6 package also conserves PCB area in a DIN-rail or panel-mounted control assembly. Before layout, verify the ADC input, I/O direction, power pins, and configuration requirements in the manufacturer pin-description table.
推荐
Small Motor and Actuator Controller
The PIC10F222-I/OT can serve as the controller in a small motor, solenoid, or actuator module where the control sequence is compact. Its four I/O pins can drive discrete transistor stages, read limit or feedback switches, and operate an indicator, while the RISC processor executes the state machine using 23 bytes of RAM. The 8-bit ADC is useful when the actuator requires analog feedback, such as a position or current sense signal. With a maximum clock of 8 MHz, timing loops and debounce routines remain practical for inexpensive motor systems. Designers should account for inductive transients, supply droop, and grounding because the SOT-23-6 footprint has limited thermal and pin breakout area. Check output-drive limits and timing assumptions in the manufacturer datasheet before adding loads.
推荐
Battery-Powered Sensor Node
The PIC10F222-I/OT is appropriate for a small battery-powered sensing node that periodically measures an analog quantity and drives a low-power output. Its 8-bit ADC handles the measurement, 768-byte Flash stores compact acquisition and threshold routines, and 23 bytes of RAM supports short working buffers. Four I/O pins permit a sensor input, wake or trigger signal, status LED, and power-control function. The fully static architecture allows firmware to remain idle between events, although actual sleep current and wake-up performance must be established from the manufacturer data sheet. The SOT-23-6 package helps reduce board area in wearable, appliance, or environmental-monitoring products. Validate battery impedance, sensor noise, ADC acquisition timing, and low-power behavior across the intended temperature range.
推荐
Industrial Switch and Relay Module
The PIC10F222-I/OT works well in a DIN-rail or wall-mounted switch module that translates a simple command into controlled output switching. Four I/O pins can support a pushbutton input, indicator LED, relay-control output, and status or interlock signal. Its 8-bit ADC can supervise an analog feedback or supply condition, while the 33-instruction RISC architecture keeps the firmware responsive without requiring a high-performance processor. The -I ordering is identified for operation from -40 °C to +85 °C, making it relevant to industrial environments when the complete assembly also satisfies its own temperature requirements. Relay drivers, isolation, flyback protection, and creepage must be designed around the MCU rather than assumed. Use the manufacturer electrical limits to define safe logic thresholds and switching delays.
推荐
Appliance Control Board
The PIC10F222-I/OT is suitable for a small appliance control board that coordinates a button panel, indicator, heater, or fan through a compact embedded program. The 8 MHz maximum operating speed supports responsive state management, while 768 bytes of Flash accommodates control logic and a modest lookup table. The four I/O pins limit the board to focused appliance functions rather than extensive direct wiring; a higher-pin-count device may be preferable when many front-panel inputs are required. The integrated 8-bit ADC can monitor a pot, temperature element, or supply level. SOT-23-6 packaging supports dense, cost-sensitive layouts. Engineers should verify startup pin states, ADC input behavior, and brownout conditions in the manufacturer documentation, and should provide local decoupling close to the power pins.
推荐
Digital Control and Learning Platform
The PIC10F222-I/OT provides a practical platform for digital control experiments, teaching boards, and small embedded prototypes. Its RISC core uses only 33 single-word instructions, most executing in one cycle, so beginners can study register-level control, timers, interrupts, and ADC conversion without a complex development architecture. Four I/O pins support LEDs, switches, and an analog input demonstration, while 768 bytes of program memory allows focused examples and compact user routines. The SOT-23-6 footprint is easy to place on a compact training PCB, although its six-terminal package requires careful footprint and orientation checks. For teaching applications, include a programming connector, stable supply, and accessible test points. Confirm programming mode pins and the final flash-programming workflow from the official documentation.
推荐
推荐产品汇总
工程参考数据: PIC10F222-I/OT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC10F222T-I/OT | PIC10F222-E/OT | PIC10F222TI/OT |
|---|---|---|---|---|
| Package | SOT-23-6 | SOT-23-6 | SOT-23-6 | SOT-23-6 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit RISC | 8-bit PIC 10F microcontroller | 8-bit PIC 10F family | 8-bit PIC 10F family |
关键差异点
- Compact integrated sensing and control (对比 PIC10F222-E/OT)
- Documented -I temperature-grade positioning (对比 PIC10F222-E/OT)
- Eight-megahertz operation in a six-pin package (对比 PIC10F222TI/OT)
设计说明
Reserve the manufacturer-specified SOT-23-6 land pattern and maintain the correct pin-1 orientation before routing power, programming, and I/O signals. Place the decoupling capacitor close to VDD and VSS so switching-current paths do not share long traces with the analog input or sensitive control nets. Because the package has only six terminals, assign pins according to the data-sheet pin-description table and avoid assumptions based only on similar PIC10 devices.
Do not treat PIC10F222-I/OT, PIC10F222T-I/OT, and PIC10F222-E/OT as automatically interchangeable. The ordering suffixes can distinguish temperature grade, package form, and shipment configuration. Reconcile the exact MPN with the manufacturer ordering table, confirm that the programmed configuration words match, and verify that the PCB footprint matches the selected suffix before substituting any part or approving a first article.
Keep the 8-bit ADC path away from switching nodes, relay drivers, motor outputs, and fast digital edges. Use a compact ground return and place analog filtering components near the controller where practical. If the ADC monitors a resistive sensor, minimize leakage from adjacent pins and guard the input according to the device recommendations. Validate the complete signal path on hardware because the device has only four I/O pins and limited routing flexibility.
合规信息
Current material-compliance declarations for the exact PIC10F222-I/OT order code were not included. Obtain the applicable Microchip declarations before treating the part as RoHS, REACH, lead-free, halogen-free, conflict-minerals compliant, or AEC-Q100 qualified.