PIC16F726-I/ML - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F726-I/ML ✓ Hoạt độngPIC16F726-I/ML Tóm tắt
An 8-bit microcontroller is a compact integrated circuit designed to execute embedded-control instructions using an 8-bit data path. PIC16 microcontrollers form part of the broader microcontroller and embedded-controller hierarchy, combining program Flash, data memory, timers, serial interfaces, analog conversion functions, and interrupt handling in one device. The PIC16F726 supports 2.5 V, 3.3 V, and 5 V operating conditions, making it suitable for both low-voltage and legacy 5 V systems.
The PIC16F726 architecture provides a 35-instruction set and an execution time stated as 200 nanoseconds. Its 20 MHz clocking capability provides ample performance for control loops, sensor acquisition, communications, and supervisory functions, while 14 KB of Flash supports substantially more firmware than a small state-machine controller. The industrial-temperature suffix identifies the I/ML ordering option, while the ML package code denotes the 28-QFN 6 x 6 mm outline used by this exact orderable part.
The device's strengths are its combination of deterministic RISC execution, flexible peripheral integration, and low-power design. The 14 KB program-memory organization supports boot logic, configuration handling, application routines, and communication protocols in a single controller. Because the part is based on the PIC16 architecture, development can use the established PIC16 toolchain and familiar interrupt and register organization rather than requiring a different software architecture.
Typical uses include industrial sensor controllers, building-automation endpoints, compact power-conversion monitors, environmental measurement systems, and communication-enabled embedded equipment. The 20 MHz processing speed supports timely sampling and control, while the 28-QFN package reduces board area compared with larger leaded or SOIC packages. Its multi-voltage capability also makes it useful in mixed-voltage equipment where a common MCU must interface with 3.3 V and 5 V peripherals.
The main design consideration is exposed-pad layout. The 28-QFN package requires a properly designed land pattern, thermal-via arrangement, and adequate copper for heat spreading. Firmware and peripheral assignments should also be checked against the exact 28-pin package before a PCB is released, because the wider PIC16 family is offered in several pin counts and package outlines.
This page combines manufacturer specifications, package and programming details, application guidance, and carefully constrained same-family drop-in comparisons to support faster component selection and board planning.
Bộ thay thế dễ dàng lắp đặt cho PIC16F726-I/ML — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16F726-I/ML (cùng hình factor và footprint) — khác nhau ở Package, ADC, Core Architecture, Internal Oscillator, Low-Power Technology.
PIC16LF726-I/ML
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC16F727-I/ML
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC16LF727-I/ML
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC16F724-I/ML
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC16F722-I/ML
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC16F726-I/ML Tỷ lệ tối đa & tính chất điện
| Controller Type | 8-bit RISC Flash microcontroller |
| Tần số xung maksimum | 20 MHz |
| Program Memory Size | 14 KB |
| Program Memory Organization | 8K x 14 words |
| Instruction Set Size | 35 single-word instructions |
| Instruction Execution Time | 200 ns |
| Supported Supply Conditions | 2.5 V, 3.3 V, and 5 V |
| Low-Power Technology | nanoWatt XLP |
| Package Type | 28-QFN |
| Package Dimensions | 6 x 6 mm |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Industrial grade, I suffix |
Hướng dẫn cấu hình chân PIC16F726-I/ML 6 x 6 mm
Cấu hình chân cho PIC16F726-I/ML (6 x 6 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC16F726-I/ML.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC16F726-I/ML phù hợp cho 6 Áp dụngs: Industrial Sensor Controllers, Building Automation Endpoints, Battery-Powered Environmental Monitoring, Compact Power-Supply Monitors, Communication Equipment Modules, Automotive Accessory Controllers.
Industrial Sensor Controllers
The PIC16F726-I/ML fits industrial sensor controllers that need fast sampling, local decision-making, and a compact controller footprint. Its 20 MHz PIC16 RISC core and 14 KB of Flash provide room for acquisition routines, calibration, fault handling, and communication protocols without separating the control MCU from the analog front end. Operating from 2.5 V, 3.3 V, or 5 V also supports mixed industrial equipment where sensor outputs and legacy logic use different voltage domains. The 28-QFN 6 x 6 mm package reduces board area, but the exposed pad must be connected according to the manufacturer land-pattern and thermal guidance.
Được đề xuất
Building Automation Endpoints
The PIC16F726-I/ML is suitable for building-automation endpoints that combine sensing, local relay control, status reporting, and low-power behavior. Its 20 MHz processing rate can support time-based control tasks and serial communication handling, while the 14 KB Flash capacity accommodates application firmware, configuration logic, and update routines. The availability of 3.3 V and 5 V operating conditions simplifies coexistence with modern controller electronics and established field-bus interfaces. The nanoWait XLP low-power focus is also useful in equipment expected to spend substantial time idle between reports or control events.
Được đề xuất
Battery-Powered Environmental Monitoring
The PIC16F726-I/ML can serve as the controller in a battery-powered environmental monitor that periodically samples sensors, evaluates thresholds, and transmits results. Its 8-bit architecture is appropriate for straightforward measurement and control tasks, while 20 MHz operation provides useful headroom for digital filtering and communication protocols. The 14 KB Flash area allows substantial firmware without an external program-memory device, and support for 2.5 V operation can assist low-voltage power-budget design. Low-power behavior must still be engineered around the device sleep modes, peripheral clocks, and wake-up sources documented by the manufacturer.
Được đề xuất
Compact Power-Supply Monitors
The PIC16F726-I/ML fits compact power-supply monitoring products that must measure operating conditions, control indicators, detect faults, and communicate status to a higher-level controller. Its 20 MHz core provides adequate timing resolution for supervisory tasks, while 14 KB of Flash can hold measurement routines, threshold tables, and communication firmware. Running at 3.3 V or 5 V supports both digitally controlled and conventional analog-assisted power systems. The 28-QFN package helps limit board area, although exposed-pad soldering and copper design are critical for reliable assembly and heat spreading.
Được đề xuất
Communication Equipment Modules
The PIC16F726-I/ML is applicable to small communication modules that need protocol management, local buffering, configuration storage, and real-time supervision. The 20 MHz execution rate supports interrupt-driven serial handling, while the 35-instruction PIC16 architecture keeps firmware manageable for compact embedded products. Its 14 KB program memory provides useful capacity for a protocol stack plus application logic, and the 28-QFN 6 x 6 mm package supports dense module layouts. Designers should use the manufacturer pin-compatibility chart to confirm UART, SPI, I2C, and interrupt assignments before reusing an existing PIC16 board.
Được đề xuất
Automotive Accessory Controllers
The PIC16F726-I/ML can support compact automotive accessory controllers when the required interface, voltage, and qualification criteria are satisfied. Its 20 MHz processing rate and 14 KB Flash are adequate for switch management, actuator sequencing, diagnostic reporting, and communication among distributed vehicle modules. The I/ML ordering code identifies an industrial-temperature package option, while the family datasheet describes automotive-related ordering information. Engineering teams must still confirm the exact AEC-Q100 status, transient immunity, temperature limits, and automotive validation requirements before using the device in a safety- or mission-related vehicle function.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC16F726-I/ML — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC16LF726-I/ML | PIC16F727-I/ML | PIC16LF727-I/ML | PIC16F724-I/ML | PIC16F722-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6x6) | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same |
| Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Temperature-Grade Suffix | I industrial grade | I industrial grade | I industrial grade | I industrial grade | I industrial grade | I industrial grade |
Bảo phân biệt quan trọng
- Broad supply-voltage support in a compact 28-QFN controller (vsPIC16LF726-I/ML)
- Exact CPU and package match for same-family board reuse (vsPIC16F727-I/ML)
- 14 KB Flash gives practical code-space headroom (vsPIC16F724-I/ML)
Ghi chú thiết kế
Use the manufacturer 28-QFN land pattern rather than a generic 28-lead footprint. The exposed pad is part of the thermal and electrical design and should be connected to the appropriate board ground plane with the prescribed via pattern. Confirm pad dimensions, solder-mask clearance, paste stencil thickness, and assembly-profile requirements against the package drawing before releasing Gerber files.
Place decoupling capacitors immediately beside the supply and ground pins, with the shortest possible current-loop path. Route oscillator and sensitive analog signals away from switching nodes and high-current LED or relay paths. Although the device operates at 20 MHz, clean supply distribution and stable grounding remain important for ADC measurements, timing accuracy, and reliable communications in compact embedded systems.
Do not treat PIC16F726-I/MV, PIC16F726-I/SO, or other package variants as PCB drop-in replacements. The MV version uses a 28-UQFN 4 x 4 mm outline, while the SO version uses a 28-pin SOIC package; the target uses a 28-QFN 6 x 6 mm package. A replacement must match the land pattern, exposed-pad treatment, pin functions, memory capacity, voltage range, and firmware configuration.
Select the power rail and peripheral interfaces around the device's supported 2.5 V, 3.3 V, and 5 V conditions. For mixed-voltage equipment, do not allow 5 V signals to enter a 3.3 V domain unless the specific pin's input tolerance is confirmed. Review the electrical-characteristics table for operating-voltage-dependent timing and current limits before finalizing the power tree.
The 28-QFN package depends on its exposed pad and surrounding PCB copper for heat spreading. Keep the area beneath and around the package as continuous as practical, follow the manufacturer's thermal-via recommendation, and avoid placing a thermal break or isolation slot under the device. For sustained high activity, evaluate junction temperature using the package thermal metrics and actual board construction.
Thông tin tuân thủ
The I/ML part is identified in automotive-related product listings, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product information.