PIC16F726-I/ML - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F726-I/ML ✓ 啟用中PIC16F726-I/ML 概覽
An 8-bit microcontroller is a compact integrated circuit designed to execute embedded-control instructions using an 8-bit data path. PIC16 microcontrollers form part of the broader microcontroller and embedded-controller hierarchy, combining program Flash, data memory, timers, serial interfaces, analog conversion functions, and interrupt handling in one device. The PIC16F726 supports 2.5 V, 3.3 V, and 5 V operating conditions, making it suitable for both low-voltage and legacy 5 V systems.
The PIC16F726 architecture provides a 35-instruction set and an execution time stated as 200 nanoseconds. Its 20 MHz clocking capability provides ample performance for control loops, sensor acquisition, communications, and supervisory functions, while 14 KB of Flash supports substantially more firmware than a small state-machine controller. The industrial-temperature suffix identifies the I/ML ordering option, while the ML package code denotes the 28-QFN 6 x 6 mm outline used by this exact orderable part.
The device's strengths are its combination of deterministic RISC execution, flexible peripheral integration, and low-power design. The 14 KB program-memory organization supports boot logic, configuration handling, application routines, and communication protocols in a single controller. Because the part is based on the PIC16 architecture, development can use the established PIC16 toolchain and familiar interrupt and register organization rather than requiring a different software architecture.
Typical uses include industrial sensor controllers, building-automation endpoints, compact power-conversion monitors, environmental measurement systems, and communication-enabled embedded equipment. The 20 MHz processing speed supports timely sampling and control, while the 28-QFN package reduces board area compared with larger leaded or SOIC packages. Its multi-voltage capability also makes it useful in mixed-voltage equipment where a common MCU must interface with 3.3 V and 5 V peripherals.
The main design consideration is exposed-pad layout. The 28-QFN package requires a properly designed land pattern, thermal-via arrangement, and adequate copper for heat spreading. Firmware and peripheral assignments should also be checked against the exact 28-pin package before a PCB is released, because the wider PIC16 family is offered in several pin counts and package outlines.
This page combines manufacturer specifications, package and programming details, application guidance, and carefully constrained same-family drop-in comparisons to support faster component selection and board planning.
直接替換替代品,適用於 PIC16F726-I/ML — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC16F726-I/ML (相同外形與佔位) — 差異在於 Package, ADC, Core Architecture, Internal Oscillator, Low-Power Technology.
PIC16LF726-I/ML
✅ 直接替換📋 參考替代品(不在目錄中)
PIC16F727-I/ML
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16LF727-I/ML
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F724-I/ML
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F722-I/ML
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F726-I/ML 最大額定值與電氣特性
| Controller Type | 8-bit RISC Flash microcontroller |
| 最大時脈頻率 | 20 MHz |
| Program Memory Size | 14 KB |
| Program Memory Organization | 8K x 14 words |
| Instruction Set Size | 35 single-word instructions |
| Instruction Execution Time | 200 ns |
| Supported Supply Conditions | 2.5 V, 3.3 V, and 5 V |
| Low-Power Technology | nanoWatt XLP |
| Package Type | 28-QFN |
| Package Dimensions | 6 x 6 mm |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial grade, I suffix |
PIC16F726-I/ML 6 x 6 mm 腳位配置指南
PIC16F726-I/ML(6 x 6 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC16F726-I/ML.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC16F726-I/ML 適用於 6 應用s: Industrial Sensor Controllers, Building Automation Endpoints, Battery-Powered Environmental Monitoring, Compact Power-Supply Monitors, Communication Equipment Modules, Automotive Accessory Controllers.
Industrial Sensor Controllers
The PIC16F726-I/ML fits industrial sensor controllers that need fast sampling, local decision-making, and a compact controller footprint. Its 20 MHz PIC16 RISC core and 14 KB of Flash provide room for acquisition routines, calibration, fault handling, and communication protocols without separating the control MCU from the analog front end. Operating from 2.5 V, 3.3 V, or 5 V also supports mixed industrial equipment where sensor outputs and legacy logic use different voltage domains. The 28-QFN 6 x 6 mm package reduces board area, but the exposed pad must be connected according to the manufacturer land-pattern and thermal guidance.
推薦
Building Automation Endpoints
The PIC16F726-I/ML is suitable for building-automation endpoints that combine sensing, local relay control, status reporting, and low-power behavior. Its 20 MHz processing rate can support time-based control tasks and serial communication handling, while the 14 KB Flash capacity accommodates application firmware, configuration logic, and update routines. The availability of 3.3 V and 5 V operating conditions simplifies coexistence with modern controller electronics and established field-bus interfaces. The nanoWait XLP low-power focus is also useful in equipment expected to spend substantial time idle between reports or control events.
推薦
Battery-Powered Environmental Monitoring
The PIC16F726-I/ML can serve as the controller in a battery-powered environmental monitor that periodically samples sensors, evaluates thresholds, and transmits results. Its 8-bit architecture is appropriate for straightforward measurement and control tasks, while 20 MHz operation provides useful headroom for digital filtering and communication protocols. The 14 KB Flash area allows substantial firmware without an external program-memory device, and support for 2.5 V operation can assist low-voltage power-budget design. Low-power behavior must still be engineered around the device sleep modes, peripheral clocks, and wake-up sources documented by the manufacturer.
推薦
Compact Power-Supply Monitors
The PIC16F726-I/ML fits compact power-supply monitoring products that must measure operating conditions, control indicators, detect faults, and communicate status to a higher-level controller. Its 20 MHz core provides adequate timing resolution for supervisory tasks, while 14 KB of Flash can hold measurement routines, threshold tables, and communication firmware. Running at 3.3 V or 5 V supports both digitally controlled and conventional analog-assisted power systems. The 28-QFN package helps limit board area, although exposed-pad soldering and copper design are critical for reliable assembly and heat spreading.
推薦
Communication Equipment Modules
The PIC16F726-I/ML is applicable to small communication modules that need protocol management, local buffering, configuration storage, and real-time supervision. The 20 MHz execution rate supports interrupt-driven serial handling, while the 35-instruction PIC16 architecture keeps firmware manageable for compact embedded products. Its 14 KB program memory provides useful capacity for a protocol stack plus application logic, and the 28-QFN 6 x 6 mm package supports dense module layouts. Designers should use the manufacturer pin-compatibility chart to confirm UART, SPI, I2C, and interrupt assignments before reusing an existing PIC16 board.
推薦
Automotive Accessory Controllers
The PIC16F726-I/ML can support compact automotive accessory controllers when the required interface, voltage, and qualification criteria are satisfied. Its 20 MHz processing rate and 14 KB Flash are adequate for switch management, actuator sequencing, diagnostic reporting, and communication among distributed vehicle modules. The I/ML ordering code identifies an industrial-temperature package option, while the family datasheet describes automotive-related ordering information. Engineering teams must still confirm the exact AEC-Q100 status, transient immunity, temperature limits, and automotive validation requirements before using the device in a safety- or mission-related vehicle function.
推薦
推薦產品摘要
工程參考資料,適用於 PIC16F726-I/ML — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC16LF726-I/ML | PIC16F727-I/ML | PIC16LF727-I/ML | PIC16F724-I/ML | PIC16F722-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6x6) | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same | 28-QFN (6x6) - same |
| Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Temperature-Grade Suffix | I industrial grade | I industrial grade | I industrial grade | I industrial grade | I industrial grade | I industrial grade |
主要差異化特點
- Broad supply-voltage support in a compact 28-QFN controller (對比PIC16LF726-I/ML)
- Exact CPU and package match for same-family board reuse (對比PIC16F727-I/ML)
- 14 KB Flash gives practical code-space headroom (對比PIC16F724-I/ML)
設計說明
Use the manufacturer 28-QFN land pattern rather than a generic 28-lead footprint. The exposed pad is part of the thermal and electrical design and should be connected to the appropriate board ground plane with the prescribed via pattern. Confirm pad dimensions, solder-mask clearance, paste stencil thickness, and assembly-profile requirements against the package drawing before releasing Gerber files.
Place decoupling capacitors immediately beside the supply and ground pins, with the shortest possible current-loop path. Route oscillator and sensitive analog signals away from switching nodes and high-current LED or relay paths. Although the device operates at 20 MHz, clean supply distribution and stable grounding remain important for ADC measurements, timing accuracy, and reliable communications in compact embedded systems.
Do not treat PIC16F726-I/MV, PIC16F726-I/SO, or other package variants as PCB drop-in replacements. The MV version uses a 28-UQFN 4 x 4 mm outline, while the SO version uses a 28-pin SOIC package; the target uses a 28-QFN 6 x 6 mm package. A replacement must match the land pattern, exposed-pad treatment, pin functions, memory capacity, voltage range, and firmware configuration.
Select the power rail and peripheral interfaces around the device's supported 2.5 V, 3.3 V, and 5 V conditions. For mixed-voltage equipment, do not allow 5 V signals to enter a 3.3 V domain unless the specific pin's input tolerance is confirmed. Review the electrical-characteristics table for operating-voltage-dependent timing and current limits before finalizing the power tree.
The 28-QFN package depends on its exposed pad and surrounding PCB copper for heat spreading. Keep the area beneath and around the package as continuous as practical, follow the manufacturer's thermal-via recommendation, and avoid placing a thermal break or isolation slot under the device. For sustained high activity, evaluate junction temperature using the package thermal metrics and actual board construction.
合規資訊
The I/ML part is identified in automotive-related product listings, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product information.