Microchip Technology

PIC24EP32GP202-E/SO - 32KB 16-Bit MCU | Microchip

料号: PIC24EP32GP202-E/SO ✓ 量产中
3.0 V to 3.6 V Vdss 28-pin SOIC, 7.50 mm width Package 32 KB Memory
最小起订量: 1 |

PIC24EP32GP202-E/SO 概述

The Microchip Technology PIC24EP32GP202-E/SO is a 16-bit PIC24E general-purpose microcontroller with 32 KB of Flash memory, 4 KB of RAM, and up to 70 MIPS core performance in a 28-pin SOIC package. It operates from 3.0 V to 3.6 V and is specified for temperatures from -40 °C to +125 °C. The device integrates advanced analog and timing peripherals for compact embedded-control designs.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The PIC24EP32GP202 belongs to the PIC24E general-purpose MCU family within the broader embedded-controller hierarchy. Its 16-bit architecture supports real-time control, while integrated analog circuitry can reduce the component count in sensing, motor-control, and industrial instrumentation systems.

Key features include 32 KB of Flash program memory, 4 KB of RAM, an ADC, CTMU, internal operational amplifiers, comparators, and a Peripheral Trigger Generator. The manufacturer describes a high-speed 70 MIPS core, while distributor listings identify the device as a 16-bit MCU capable of 60 MIPS. High-speed PWM with 7.14 ns resolution supports precise switching and timing applications.

The PIC24E architecture combines a 16-bit core with dedicated peripheral hardware intended for general-purpose embedded systems. The CTMU provides touch, timing, and measurement functions, while the internal operational amplifiers support signal conditioning without requiring external amplifiers where appropriate. Comparators and the Peripheral Trigger Generator help implement threshold decisions and hardware-triggered events with less firmware overhead.

Typical uses include industrial control panels, motor and power conversion systems, instrumentation, LED lighting equipment, and compact consumer products requiring mixed analog and digital control. The 28-pin SOIC package is suitable for conventional surface-mount assembly where a through-hole lead pitch and a moderate pin count are preferred over a very small package.

Designers should verify the exact pin functions and exposed connections against the manufacturer pin-description table before layout release. The 3.0 V to 3.6 V operating range requires a regulated supply with appropriate transient margin. Firmware development should use the programming and debugging tools supported for the PIC24EPxxGP family, including the supported PIC24E device families.

This page combines the device specifications, verified lifecycle information, package details, drop-in replacement candidates, practical design guidance, and engineering comparisons needed to plan a PIC24EP32GP202-E/SO-based embedded system efficiently.

直接替换替代料: PIC24EP32GP202-E/SO ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC24EP32GP202-E/SO (相同外形与封装尺寸) ——差异在于 ADC, Operating Temperature, Package, CTMU, Comparators.

Microchip Technology
ADC: 10-bit, up to 1.1 Msps, 16 channels
Operating Temperature: -40 °C to +125 °C (E - automotive)
Package: 28-pin SOIC (0.295", 7.50 mm width)
Microchip Technology
ADC: 12-bit, 500 ksps
Operating Temperature: -40 C to +85 C (Industrial)
Package: 28-SOIC (0.295 inch / 7.50 mm body width)

PIC24EP32GP202T-E/SO

✅ 直接替换
Microchip Technology
📦 28-pin SOIC
PIC24E 16-bit modified-Harvard with DSP · 70 MHz (60 MIPS) · 32 KB (10.7K x 24 words) · 2 KB · 3.0 V to 3.6 V · -40 °C to +125 °C (E - automotive) · 28-pin SOIC (0.295", 7.50 mm width) · 10-bit, up to 1.1 Msps, 16 channels

联系询价

查看数据手册 →

PIC24EP32GP202I/SO

✅ 直接替换
📦 28-pin SOIC
Core, 32 KB Flash, 4 KB RAM, and 28-pin SOIC construction are retained; the I grade differs from the E grade's -40 °C to +125 °C temperature specification.

📋 参考替代料(不在目录中)

PIC24EP32GP202T-I/SO

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 28-pin SOIC
PIC24E 16-bit MCU/DSC · 32 KB (10.7K x 24 words) · 4 KB · 70 MIPS (70 MHz) · 3.0 V to 3.6 V · -40 C to +85 C (Industrial) · 12-bit, 500 ksps · Internal (peripherals)

联系询价

查看数据手册 →

PIC24EP32GP202-E/SO 最大额定值与电气特性

Architecture 16-bit PIC24E
Flash Memory 32 KB
Program Memory Organization 10.7K words x 24 bits
RAM 4 KB
Maximum Core Performance 70 MIPS
Distributor Rated Performance 60 MIPS
Operating Voltage 3.0 V to 3.6 V
工作温度 -40 °C to +125 °C
ADC Integrated ADC
CTMU Integrated capacitive touch and measurement unit
Operational Amplifiers Integrated op amps
Comparators Integrated comparators
Peripheral Trigger Generator Integrated PTG
PWM Resolution 7.14 ns
封装 28-pin SOIC, 7.50 mm width
安装类型 Surface mount
Temperature Grade Extended temperature grade

PIC24EP32GP202-E/SO 28-pin soic, 7.50 mm width 引脚配置指南

PIC24EP32GP202-E/SO(28-pin soic, 7.50 mm width 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC24EP32GP202-E/SO 的 28-pin soic, 7.50 mm width 封装引脚图

暂无详细引脚数据: PIC24EP32GP202-E/SO.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC24EP32GP202-E/SO 适用于 6 应用s: Industrial Control Panels, Motor and Power Conversion Control, Precision Instrumentation, LED Lighting and Dimming Control, Human-Machine Interface Control, Battery-Powered Sensor Nodes.

🏭

Industrial Control Panels

The PIC24EP32GP202-E/SO fits industrial control panels that require deterministic sensing, actuator control, and communications in one compact MCU. Its 16-bit core, up to 70 MIPS class performance, 32 KB Flash memory, and 4 KB RAM provide enough resources for control logic, state handling, and parameter storage. The integrated ADC supports analog process monitoring, while comparators and the PTG can trigger events without excessive interrupt overhead. The -40 °C to +125 °C rating supports a broad range of industrial ambient conditions, and the 28-pin SOIC simplifies assembly on conventional control boards.

⚡

Motor and Power Conversion Control

The PIC24EP32GP202-E/SO is well suited to real-time motor-control and power-conversion subsystems where fast switching timing and analog measurements must coexist. The 16-bit core provides efficient control-loop execution, while the 7.14 ns PWM resolution supports precise edge placement and duty-cycle control. Internal comparators can monitor fast feedback signals, and the ADC can observe slower control voltages or temperatures. Its 3.0 V to 3.6 V supply range integrates naturally with 3.3 V gate-driver and sensing electronics, provided the external power stage and switching-node isolation are designed appropriately.

🔧

Precision Instrumentation

The PIC24EP32GP202-E/SO can serve as the central controller in compact measurement instruments that combine sensor conditioning, data processing, and a communications interface. Its integrated operational amplifiers and comparators may reduce the number of external analog components in suitable low-level signal paths, while the CTMU supports capacitive sensing and precise timing functions. The 32 KB Flash accommodates firmware, calibration tables, and configuration data, and the 4 KB RAM supports working buffers. Engineers should verify amplifier bandwidth, input range, offset, and output drive against their particular sensor before relying on an internal amplifier.

💡

LED Lighting and Dimming Control

The PIC24EP32GP202-E/SO is appropriate for programmable LED lighting systems requiring accurate current modulation, fault detection, and user-interface coordination. Its high-speed PWM capability, including 7.14 ns resolution, enables precise switching control for dimming and sequencing. The ADC can monitor LED current or temperature feedback, while comparators support rapid threshold detection and fault handling. With 32 KB Flash and 4 KB RAM, the device can store lighting profiles, calibration coefficients, and communication handlers. The 28-pin SOIC package leaves sufficient pins for multiple channels, serial control, and status signaling in a compact driver board.

📱

Human-Machine Interface Control

The PIC24EP32GP202-E/SO can manage compact human-machine interfaces containing buttons, encoders, status indicators, and a small serial display. Its CTMU can implement capacitive touch sensing, reducing the need for dedicated touch-controller ICs when the required electrode arrangement and environmental conditions are suitable. The 16-bit core handles debouncing, menu logic, display updates, and communications concurrently, while 32 KB Flash provides room for interface firmware and assets. Its 3.3 V operating range aligns with common display and communications peripherals, making pin assignment and peripheral multiplexing important parts of the board plan.

🧩

Battery-Powered Sensor Nodes

The PIC24EP32GP202-E/SO fits compact battery-powered sensor nodes that require local signal conditioning and low-power standby operation. The ADC and CTMU can support sensor acquisition, while the internal comparators provide threshold decisions with low software overhead. The 3.0 V to 3.6 V operating range is compatible with regulated 3.3 V power rails, and the 32 KB Flash memory supports protocol stacks and local data processing. Sleep behavior, peripheral wake conditions, and analog accuracy must be checked against the node's duty cycle and measurement requirements. The SOIC package is particularly practical for prototypes and repair-friendly industrial sensor modules.

推荐产品汇总

PIC24EP32GP202 Base device for the selected MCU family 用于: Industrial Control Panels, Motor and Power Conversion Control, Precision Instrumentation, LED Lighting and Dimming Control, Human-Machine Interface Control, Battery-Powered Sensor Nodes PIC24EP32GP202T-E/SO Microchip Technology 用于: Industrial Control Panels, Motor and Power Conversion Control, Precision Instrumentation, LED Lighting and Dimming Control, Human-Machine Interface Control, Battery-Powered Sensor Nodes
What are the key specifications of PIC24EP32GP202-E/SO that engineers should know?
The PIC24EP32GP202-E/SO is a 16-bit PIC24E general-purpose MCU with 32 KB of Flash memory, 4 KB of RAM, up to 70 MIPS performance, and a 3.0 V to 3.6 V operating range. According to the Microchip product page, it integrates an ADC, CTMU, operational amplifiers, comparators, and a Peripheral Trigger Generator. The device is offered in a 28-pin SOIC package and is rated from -40 °C to +125 °C, making it suitable for real-time embedded systems requiring mixed analog and digital control.
What is the operating voltage of PIC24EP32GP202-E/SO?
The PIC24EP32GP202-E/SO operates from 3.0 V to 3.6 V. According to the Microchip PIC24EP32GP202 datasheet information, this device is intended for a regulated 3.3 V design environment. Its supply design should account for the allowable input range, decoupling requirements, and any transient conditions present at the board's power entry point. The 32 KB Flash and 4 KB RAM resources are also commonly paired with 3.3 V sensor, communications, and control circuitry.
What is the maximum performance of PIC24EP32GP202-E/SO?
The Microchip PIC24EP32GP202 family uses a high-speed 16-bit core that reaches up to 70 MIPS, while distributor descriptions identify the exact PIC24EP32GP202-E/SO as a 60 MIPS MCU. The distinction reflects how performance is described across the family and individual catalog listings. For design calculations, use the device-specific timing specifications in the manufacturer datasheet while recognizing that the broader PIC24E family is positioned around the 70 MIPS class.
Where can I download the PIC24EP32GP202-E/SO datasheet PDF?
The official PIC24EP32GP202 datasheet and supporting documentation are available from the Microchip product page at https://www.microchip.com/en-us/product/PIC24EP32GP202. From that page, open the Documentation section and select the PIC24EP32GP202 datasheet for electrical characteristics, pin descriptions, memory maps, and peripheral details. Use the pin-description table when assigning PCB nets because function multiplexing and analog-capable pins must be checked against the exact device variant.
Where can I find the PIC24EP32GP202-E/SO pinout?
The PIC24EP32GP202-E/SO pinout is documented on the Microchip PIC24EP32GP202 product page and in the device datasheet. The package is a 28-pin SOIC, so use the manufacturer pin-description table to verify power pins, ground pins, programming interfaces, communications functions, and peripheral multiplexing before finalizing the schematic and PCB layout. Do not infer analog or communications functions from adjacent pins without checking the alternate-function settings for this exact variant.
What can replace PIC24EP32GP202-E/SO on the same PCB?
PIC24EP32GP202T-E/SO is the closest identified same-package replacement because it retains the PIC24EP32GP202 device identity, 28-pin SOIC package, 32 KB Flash memory, and extended-temperature ordering class. The T designation identifies a different shipping configuration, so firmware, programming, pin assignments, and qualification requirements should still be reviewed before substitution. The Microchip cross-reference search should be used to confirm any change in packing form, temperature grade, or production status.
Is PIC24EP32GP202T-E/SO a drop-in replacement for PIC24EP32GP202-E/SO?
PIC24EP32GP202T-E/SO can serve as a same-package alternative when the original /SO ordering code identifies the required shipping configuration and all electrical ratings remain acceptable for the assembly. Both parts use the 28-pin SOIC footprint and the PIC24EP32GP202 family. Before replacing the device, compare the ordering codes, confirm the required packing form, and validate the programming configuration. The Microchip cross-reference search can confirm the manufacturer-recommended transition.
Is PIC24EP32GP202-E/SO suitable for industrial control and instrumentation?
Yes, the PIC24EP32GP202-E/SO is suitable for many industrial control and instrumentation designs. It combines a 16-bit core, 32 KB Flash memory, 4 KB RAM, an ADC, CTMU, comparators, internal operational amplifiers, and a Peripheral Trigger Generator within a -40 °C to +125 °C rated 28-pin SOIC package. Its 7.14 ns PWM resolution also supports precision timing tasks, while the integrated analog peripherals can simplify front-end designs when their input ranges and noise characteristics meet the application requirements.
PIC24EP32GP202-E/SO vs PIC24EP32GP202I/SO - which temperature grade should be selected?
PIC24EP32GP202-E/SO is the extended-temperature choice for designs that may operate from -40 °C to +125 °C, while PIC24EP32GP202I/SO represents the industrial-temperature ordering variant. The Microchip ordering information and datasheet should be checked for the exact upper temperature limit and qualification implications of the I grade. Both devices share the 28-pin SOIC package and core family, but the required environmental range and production qualification should determine the final selection.
What is the difference between PIC24EP32GP202-E/SO and PIC24EP32GP202T-E/SO?
The primary difference between PIC24EP32GP202-E/SO and PIC24EP32GP202T-E/SO is the ordering suffix associated with the required shipping configuration. Both are 16-bit PIC24E devices with 32 KB Flash memory, 4 KB RAM, a 28-pin SOIC package, and the same integrated analog and timing peripheral family. Check the manufacturer ordering guide to confirm whether T changes reel orientation or another assembly attribute, then ensure the incoming-device marking and programming requirements remain acceptable.
When should I choose PIC24EP32GP202-E/SO over another PIC24E microcontroller?
Choose PIC24EP32GP202-E/SO when the design requires a 28-pin SOIC footprint, 32 KB Flash memory, 4 KB RAM, a 3.3 V operating range, and an extended -40 °C to +125 °C temperature rating. Its integrated ADC, CTMU, op amps, comparators, and PTG can also reduce external circuitry in measurement and control products. Choose another family member when the application needs more memory, additional I/O, a different package, or another temperature qualification.
What is the best cross-brand equivalent for PIC24EP32GP202-E/SO?
No cross-brand drop-in equivalent has been established for the PIC24EP32GP202-E/SO because software, peripheral mapping, programming tools, and interrupt behavior are MCU-family specific. The Microchip cross-reference search identifies compatible products within the manufacturer's portfolio, while third-party 16-bit or 32-bit MCUs generally require software and hardware redesign. Use a direct Microchip same-package option for a production replacement unless the complete board design is being revised and the new MCU's electrical and firmware requirements are independently validated.
Where to buy PIC24EP32GP202-E/SO online?
Use the Request a Quote form on this page to request the current price, stock status, manufacturer part-number confirmation, and delivery schedule for PIC24EP32GP202-E/SO. The exact MPN includes the extended-temperature and SOIC ordering codes, so provide that complete suffix when requesting a quotation. Microchip's product page and cross-reference search can also be used to confirm lifecycle status, documentation, and approved successors.
What is the price of PIC24EP32GP202-E/SO?
The current commercial terms for PIC24EP32GP202-E/SO are handled through the Request a Quote form on this page. Submit the complete manufacturer part number, required quantity, target shipment date, and packing preference so the quotation reflects the correct 28-pin SOIC configuration. Pricing can change with inventory, volume, and lifecycle conditions, which is why a live quote is more reliable than a static catalog figure.
Is PIC24EP32GP202-E/SO in stock and what is its lead time?
Current stock and lead time for PIC24EP32GP202-E/SO should be confirmed through the Request a Quote form on this page. Include the required order quantity and delivery date in the request so the response can reflect available production supply and the required 28-pin SOIC configuration. The Microchip product page remains the authoritative location for lifecycle information, while formal quotation confirms commercial availability for the requested quantity and date.

工程参考数据: PIC24EP32GP202-E/SO ——对比、设计指导和合规信息。

选型指南

Choose PIC24EP32GP202-E/SO for a 28-pin SOIC design requiring 32 KB Flash, 4 KB RAM, a 3.3 V supply, integrated analog and timing peripherals, and operation across -40 °C to +125 °C. Choose PIC24EP32GP202T-E/SO when the electrical and environmental requirements are the same but the assembly process requires the T shipping configuration. Consider PIC24EP32GP202I/SO only when the industrial-temperature ordering grade is adequate and its confirmed operating range meets the product requirements. PIC24EP32GP202T-I/SO combines that temperature grade with the alternate shipping designation. No verified cross-brand drop-in alternative was identified; changing MCU architecture would require a complete firmware, peripheral, pin-muxing, and toolchain review rather than a simple board substitution.

与替代料对比

参数 本产品 PIC24EP32GP202T-E/SO PIC24EP32GP202I/SO PIC24EP32GP202T-I/SO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC
Architecture 16-bit PIC24E 16-bit PIC24E 16-bit PIC24E 16-bit PIC24E
Flash Memory 32 KB 32 KB 32 KB 32 KB
RAM 4 KB 4 KB 4 KB 4 KB
Temperature Grade Extended grade, -40 °C to +125 °C Extended grade, -40 °C to +125 °C Industrial grade; exact upper limit requires confirmation Industrial grade; exact upper limit requires confirmation
Integrated Analog and Timing Peripherals ADC, CTMU, op amps, comparators, and PTG ADC, CTMU, op amps, comparators, and PTG ADC, CTMU, op amps, comparators, and PTG ADC, CTMU, op amps, comparators, and PTG
Programming and Peripheral Compatibility PIC24EP32GP202 family PIC24EP32GP202 family PIC24EP32GP202 family PIC24EP32GP202 family

关键差异点

  • Extended-temperature 28-pin SOIC configuration (对比 PIC24EP32GP202I/SO)
  • Integrated analog and event-control peripherals (对比 PIC24EP32GP202T-E/SO)
  • Same-footprint replacement path without PCB changes (对比 PIC24EP32GP202T-E/SO)
  • Real-time control performance in an integrated MCU (对比 PIC24EP32GP202T-I/SO)

设计说明

Route the 3.3 V supply and ground return using a low-impedance distribution path, and place the required decoupling capacitors close to the corresponding VDD and VSS pins. Keep analog inputs away from PWM outputs, switching nodes, and high-current return paths to reduce injected noise. The integrated op amps and comparators can reduce external component count, but their pins should still be routed with short analog traces and a quiet ground reference.

Use the manufacturer pin-description and alternate-function tables before assigning communication, programming, or analog pins. The CTMU, ADC, comparators, and internal op amps share a finite set of pins with digital functions, so an incorrect multiplexing choice can affect both signal quality and firmware configuration. Confirm that each peripheral's direction, analog enable state, peripheral pin-select registers, and direction controls are configured consistently for the final board revision.

Do not treat the /SO, T, I, and E ordering suffixes as interchangeable without checking the Microchip ordering guide. The SO suffix identifies the 28-pin SOIC configuration, while E and I identify temperature ordering classes and T identifies a shipping configuration. A hardware-compatible alternative can still be operationally unsuitable if the ambient range, packing requirement, qualification, or programmed-device configuration does not match the original design.

Design the 3.0 V to 3.6 V supply with transient margin rather than relying on a nominal 3.3 V rail alone. Confirm voltage accuracy at the MCU pins under startup, load changes, and temperature extremes. If the board shares a rail with motors, LEDs, radio transmitters, or switching converters, verify that ripple remains within the device's operating and noise limits and place local bypass capacitance at the supply pins.

Use the 28-pin SOIC footprint and land pattern from the manufacturer package drawing, paying particular attention to pin-1 orientation and solder-paste or assembly compatibility. Keep programming and debug access accessible on assembled boards. For analog signals routed from external connectors, use a quiet return path, guard structures where appropriate, and controlled spacing from switching inductors or power-stage copper.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The -E ordering suffix denotes an extended-temperature grade, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation.

相关搜索

PIC24EP32GP202-E/SO PIC24EP32GP202-E/SO datasheet PIC24EP32GP202-E/SO datasheet pdf PIC24EP32GP202-E/SO pinout PIC24EP32GP202-E/SO equivalent PIC24EP32GP202-E/SO replacement PIC24EP32GP202-E/SO cross reference PIC24EP32GP202 32KB 4KB RAM PIC24EP32GP202 70 MIPS PIC24EP32GP202 28-pin SOIC PIC24EP32GP202 industrial control PIC24EP32GP202 motor control PIC24EP32GP202 vs PIC24EP32GP202T-E/SO PIC24EP32GP202-E/SO price PIC24EP32GP202-E/SO stock

相关元器件 & 术语

Microchip Technology PIC24EP32GP202-E/SO PIC24EP32GP202 PIC24EP32GP202T-E/SO PIC24EP32GP202I/SO PIC24EP32GP202T-I/SO PIC24E PIC24 general-purpose microcontroller 16-bit microcontroller embedded microcontroller semiconductor Flash memory static RAM ADC CTMU operational amplifier comparator Peripheral Trigger Generator PWM 28-pin SOIC SOIC package family surface-mount package 3.3 V power supply industrial control motor control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情