PIC24EP32GP202-E/SO - 32KB 16-Bit MCU | Microchip
MPN: PIC24EP32GP202-E/SO ✓ 啟用中PIC24EP32GP202-E/SO 概覽
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The PIC24EP32GP202 belongs to the PIC24E general-purpose MCU family within the broader embedded-controller hierarchy. Its 16-bit architecture supports real-time control, while integrated analog circuitry can reduce the component count in sensing, motor-control, and industrial instrumentation systems.
Key features include 32 KB of Flash program memory, 4 KB of RAM, an ADC, CTMU, internal operational amplifiers, comparators, and a Peripheral Trigger Generator. The manufacturer describes a high-speed 70 MIPS core, while distributor listings identify the device as a 16-bit MCU capable of 60 MIPS. High-speed PWM with 7.14 ns resolution supports precise switching and timing applications.
The PIC24E architecture combines a 16-bit core with dedicated peripheral hardware intended for general-purpose embedded systems. The CTMU provides touch, timing, and measurement functions, while the internal operational amplifiers support signal conditioning without requiring external amplifiers where appropriate. Comparators and the Peripheral Trigger Generator help implement threshold decisions and hardware-triggered events with less firmware overhead.
Typical uses include industrial control panels, motor and power conversion systems, instrumentation, LED lighting equipment, and compact consumer products requiring mixed analog and digital control. The 28-pin SOIC package is suitable for conventional surface-mount assembly where a through-hole lead pitch and a moderate pin count are preferred over a very small package.
Designers should verify the exact pin functions and exposed connections against the manufacturer pin-description table before layout release. The 3.0 V to 3.6 V operating range requires a regulated supply with appropriate transient margin. Firmware development should use the programming and debugging tools supported for the PIC24EPxxGP family, including the supported PIC24E device families.
This page combines the device specifications, verified lifecycle information, package details, drop-in replacement candidates, practical design guidance, and engineering comparisons needed to plan a PIC24EP32GP202-E/SO-based embedded system efficiently.
直接替換替代品,適用於 PIC24EP32GP202-E/SO — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24EP32GP202-E/SO (相同外形與佔位) — 差異在於 ADC, Operating Temperature, Package, CTMU, Comparators.
PIC24EP32GP202T-E/SO
✅ 直接替換聯絡詢價
查看資料表 →PIC24EP32GP202I/SO
✅ 直接替換📋 參考替代品(不在目錄中)
PIC24EP32GP202T-I/SO
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC24EP32GP202-E/SO 最大額定值與電氣特性
| Architecture | 16-bit PIC24E |
| Flash Memory | 32 KB |
| Program Memory Organization | 10.7K words x 24 bits |
| RAM | 4 KB |
| Maximum Core Performance | 70 MIPS |
| Distributor Rated Performance | 60 MIPS |
| Operating Voltage | 3.0 V to 3.6 V |
| 工作溫度 | -40 °C to +125 °C |
| ADC | Integrated ADC |
| CTMU | Integrated capacitive touch and measurement unit |
| Operational Amplifiers | Integrated op amps |
| Comparators | Integrated comparators |
| Peripheral Trigger Generator | Integrated PTG |
| PWM Resolution | 7.14 ns |
| 封裝 | 28-pin SOIC, 7.50 mm width |
| 安裝類型 | Surface mount |
| Temperature Grade | Extended temperature grade |
PIC24EP32GP202-E/SO 28-pin soic, 7.50 mm width 腳位配置指南
PIC24EP32GP202-E/SO(28-pin soic, 7.50 mm width 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24EP32GP202-E/SO.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24EP32GP202-E/SO 適用於 6 應用s: Industrial Control Panels, Motor and Power Conversion Control, Precision Instrumentation, LED Lighting and Dimming Control, Human-Machine Interface Control, Battery-Powered Sensor Nodes.
Industrial Control Panels
The PIC24EP32GP202-E/SO fits industrial control panels that require deterministic sensing, actuator control, and communications in one compact MCU. Its 16-bit core, up to 70 MIPS class performance, 32 KB Flash memory, and 4 KB RAM provide enough resources for control logic, state handling, and parameter storage. The integrated ADC supports analog process monitoring, while comparators and the PTG can trigger events without excessive interrupt overhead. The -40 °C to +125 °C rating supports a broad range of industrial ambient conditions, and the 28-pin SOIC simplifies assembly on conventional control boards.
推薦
Motor and Power Conversion Control
The PIC24EP32GP202-E/SO is well suited to real-time motor-control and power-conversion subsystems where fast switching timing and analog measurements must coexist. The 16-bit core provides efficient control-loop execution, while the 7.14 ns PWM resolution supports precise edge placement and duty-cycle control. Internal comparators can monitor fast feedback signals, and the ADC can observe slower control voltages or temperatures. Its 3.0 V to 3.6 V supply range integrates naturally with 3.3 V gate-driver and sensing electronics, provided the external power stage and switching-node isolation are designed appropriately.
推薦
Precision Instrumentation
The PIC24EP32GP202-E/SO can serve as the central controller in compact measurement instruments that combine sensor conditioning, data processing, and a communications interface. Its integrated operational amplifiers and comparators may reduce the number of external analog components in suitable low-level signal paths, while the CTMU supports capacitive sensing and precise timing functions. The 32 KB Flash accommodates firmware, calibration tables, and configuration data, and the 4 KB RAM supports working buffers. Engineers should verify amplifier bandwidth, input range, offset, and output drive against their particular sensor before relying on an internal amplifier.
推薦
LED Lighting and Dimming Control
The PIC24EP32GP202-E/SO is appropriate for programmable LED lighting systems requiring accurate current modulation, fault detection, and user-interface coordination. Its high-speed PWM capability, including 7.14 ns resolution, enables precise switching control for dimming and sequencing. The ADC can monitor LED current or temperature feedback, while comparators support rapid threshold detection and fault handling. With 32 KB Flash and 4 KB RAM, the device can store lighting profiles, calibration coefficients, and communication handlers. The 28-pin SOIC package leaves sufficient pins for multiple channels, serial control, and status signaling in a compact driver board.
推薦
Human-Machine Interface Control
The PIC24EP32GP202-E/SO can manage compact human-machine interfaces containing buttons, encoders, status indicators, and a small serial display. Its CTMU can implement capacitive touch sensing, reducing the need for dedicated touch-controller ICs when the required electrode arrangement and environmental conditions are suitable. The 16-bit core handles debouncing, menu logic, display updates, and communications concurrently, while 32 KB Flash provides room for interface firmware and assets. Its 3.3 V operating range aligns with common display and communications peripherals, making pin assignment and peripheral multiplexing important parts of the board plan.
推薦
Battery-Powered Sensor Nodes
The PIC24EP32GP202-E/SO fits compact battery-powered sensor nodes that require local signal conditioning and low-power standby operation. The ADC and CTMU can support sensor acquisition, while the internal comparators provide threshold decisions with low software overhead. The 3.0 V to 3.6 V operating range is compatible with regulated 3.3 V power rails, and the 32 KB Flash memory supports protocol stacks and local data processing. Sleep behavior, peripheral wake conditions, and analog accuracy must be checked against the node's duty cycle and measurement requirements. The SOIC package is particularly practical for prototypes and repair-friendly industrial sensor modules.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24EP32GP202-E/SO — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24EP32GP202T-E/SO | PIC24EP32GP202I/SO | PIC24EP32GP202T-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Architecture | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB |
| Temperature Grade | Extended grade, -40 °C to +125 °C | Extended grade, -40 °C to +125 °C | Industrial grade; exact upper limit requires confirmation | Industrial grade; exact upper limit requires confirmation |
| Integrated Analog and Timing Peripherals | ADC, CTMU, op amps, comparators, and PTG | ADC, CTMU, op amps, comparators, and PTG | ADC, CTMU, op amps, comparators, and PTG | ADC, CTMU, op amps, comparators, and PTG |
| Programming and Peripheral Compatibility | PIC24EP32GP202 family | PIC24EP32GP202 family | PIC24EP32GP202 family | PIC24EP32GP202 family |
主要差異化特點
- Extended-temperature 28-pin SOIC configuration (對比PIC24EP32GP202I/SO)
- Integrated analog and event-control peripherals (對比PIC24EP32GP202T-E/SO)
- Same-footprint replacement path without PCB changes (對比PIC24EP32GP202T-E/SO)
- Real-time control performance in an integrated MCU (對比PIC24EP32GP202T-I/SO)
設計說明
Route the 3.3 V supply and ground return using a low-impedance distribution path, and place the required decoupling capacitors close to the corresponding VDD and VSS pins. Keep analog inputs away from PWM outputs, switching nodes, and high-current return paths to reduce injected noise. The integrated op amps and comparators can reduce external component count, but their pins should still be routed with short analog traces and a quiet ground reference.
Use the manufacturer pin-description and alternate-function tables before assigning communication, programming, or analog pins. The CTMU, ADC, comparators, and internal op amps share a finite set of pins with digital functions, so an incorrect multiplexing choice can affect both signal quality and firmware configuration. Confirm that each peripheral's direction, analog enable state, peripheral pin-select registers, and direction controls are configured consistently for the final board revision.
Do not treat the /SO, T, I, and E ordering suffixes as interchangeable without checking the Microchip ordering guide. The SO suffix identifies the 28-pin SOIC configuration, while E and I identify temperature ordering classes and T identifies a shipping configuration. A hardware-compatible alternative can still be operationally unsuitable if the ambient range, packing requirement, qualification, or programmed-device configuration does not match the original design.
Design the 3.0 V to 3.6 V supply with transient margin rather than relying on a nominal 3.3 V rail alone. Confirm voltage accuracy at the MCU pins under startup, load changes, and temperature extremes. If the board shares a rail with motors, LEDs, radio transmitters, or switching converters, verify that ripple remains within the device's operating and noise limits and place local bypass capacitance at the supply pins.
Use the 28-pin SOIC footprint and land pattern from the manufacturer package drawing, paying particular attention to pin-1 orientation and solder-paste or assembly compatibility. Keep programming and debug access accessible on assembled boards. For analog signals routed from external connectors, use a quiet return path, guard structures where appropriate, and controlled spacing from switching inductors or power-stage copper.
合規資訊
The -E ordering suffix denotes an extended-temperature grade, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer documentation.