PIC32CM5164LS60064T-I/5LX - 512KB Flash MCU, Cortex-M23, 64-VQFN | Microchip
MPN: PIC32CM5164LS60064T-I/5LX ✓ Hoạt độngPIC32CM5164LS60064T-I/5LX Tóm tắt
Background Knowledge - What is a Cortex-M23 microcontroller? A Cortex-M23 microcontroller is a 32-bit MCU IP core from Arm designed for energy-efficient embedded applications; it sits between the older Cortex-M0+ and the more capable Cortex-M4 in the Arm hierarchy, with full Armv8-M Baseline architecture including TrustZone for Cortex-M. The PIC32CM LS60 family extends this with Microchip's proprietary low-power techniques including picoPower, SleepWalking, and Event System. The taxonomy for this part is: 32-bit microcontroller -> Arm Cortex-M MCU -> Cortex-M23 family -> PIC32CM LS60 family -> Microchip PIC microcontroller line.
Key features include up to 48 MHz CPU clock, 2.64 CoreMark/MHz performance, 1.03 DMIPS/MHz, single-cycle hardware multiplier, hardware divider, Nested Vector Interrupt Controller (NVIC), Memory Protection Unit (MPU), integrated touch controller and op-amps (smart analog), 2.0V-3.63V supply for LS60 variants, and 5x5 mm to 9x9 mm package options depending on pin count. The LS60 suffix indicates the security-enabled variant with ATECC608 crypto authentication integrated on-die.
The architecture pairs a Cortex-M23 core with bus matrix connected to Flash, SRAM, peripherals and the Event System for zero-CPU-overhead peripheral hand-off. SleepWalking allows peripherals to inspect incoming data autonomously and only wake the CPU when relevant events arrive, dramatically reducing average power in IoT sensor nodes. TrustZone for Cortex-M partitions memory and peripherals into Secure and Non-Secure worlds.
Typical applications include IoT end nodes (battery-powered sensors), secure connected devices with crypto authentication (smart locks, asset trackers), touch-interface industrial controls, smart home and building automation hubs, medical wearables (low-power BLE body monitors), and secure payment terminals. The combination of low power, integrated crypto, and touch makes it well-suited to edge nodes that must authenticate to a cloud.
Design consideration - The 2.0V-3.63V supply range means this MCU cannot be powered directly from a single-cell Li-Ion (4.2V max) without an LDO; pair with a low-Iq regulator such as MCP1700. Decouple VDD with a 100 nF X7R ceramic placed within 3 mm of each power pin group.
This page synthesizes distributor pricing, drop-in PIC32CM alternatives, and design notes not found in the standalone manufacturer datasheet, including a same-package comparison versus LS00 (no ATECC608) and LS00 (no security) family variants.
Bộ thay thế dễ dàng lắp đặt cho PIC32CM5164LS60064T-I/5LX — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32CM5164LS60064T-I/5LX (cùng hình factor và footprint) — khác nhau ở Package, ADC, RoHS Status, Connectivity, Core.
PIC32CM5164LS60048T-I/5LX
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC32CM5164LS60048-I/U5B
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC32CM5164LS00064T-I/5LX
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32CM5164LS00064-I/5LX
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32CM5164LS60064T-I/5LX-PROTO
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32CM5164LS60064T-I/5LX Tỷ lệ tối đa & tính chất điện
| Core | Arm Cortex-M23 |
| Maximum CPU Frequency | 48 MHz |
| CoreMark/MHz | 2.64 |
| DMIPS/MHz | 1.03 |
| Program Memory (Flash) | 512 KB |
| SRAM | 64 KB |
| Supply Voltage (LS60) | 2.0 V to 3.63 V |
| Nhiệt độ hoạt động | -40C to +85C (Industrial 'I') |
| Hộp | 64-VQFN (9x9 mm) |
| Số chân | 64 |
| Security Module | Integrated ATECC608 Trust Platform |
| Security Architecture | Arm TrustZone for Cortex-M |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant (Green) |
| Packaging Form | Tape & Reel (T suffix) |
Cấu hình chân PIC32CM5164LS60064T-I/5LX
| Chân 1 | VDD — Digital power supply |
| Chân 2 | PA00 — GPIO / peripheral function |
| Chân 3 | PA01 — GPIO / peripheral function |
| Chân 4 | GND — Ground |
| Chân 5 | PA02 — GPIO / peripheral function |
| Chân 6 | PA03 — GPIO / peripheral function |
| Chân 7 | PA04 — GPIO / peripheral function |
| Chân 8 | PA05 — GPIO / peripheral function |
| Chân 9 | PA06 — GPIO / peripheral function |
| Chân 10 | PA07 — GPIO / peripheral function |
| Chân 11 | PA08 — GPIO / peripheral function |
| Chân 12 | PA09 — GPIO / peripheral function |
| Chân 13 | PA10 — GPIO / peripheral function |
| Chân 14 | PA11 — GPIO / peripheral function |
| Chân 15 | PA12 — GPIO / peripheral function |
| Chân 16 | PA13 — GPIO / peripheral function |
| Chân 17 | PA14 — GPIO / peripheral function |
| Chân 18 | PA15 — GPIO / peripheral function |
| Chân 19 | PA16 — GPIO / peripheral function |
| Chân 20 | PA17 — GPIO / peripheral function |
| Chân 21 | PA18 — GPIO / peripheral function |
| Chân 22 | PA19 — GPIO / peripheral function |
| Chân 23 | PA20 — GPIO / peripheral function |
| Chân 24 | PA21 — GPIO / peripheral function |
| Chân 25 | PA22 — GPIO / peripheral function |
| Chân 26 | PA23 — GPIO / peripheral function |
| Chân 27 | PA24 — GPIO / peripheral function |
| Chân 28 | PA25 — GPIO / peripheral function |
| Chân 29 | PA26 — GPIO / peripheral function |
| Chân 30 | PA27 — GPIO / peripheral function |
| Chân 31 | PA28 — GPIO / peripheral function |
| Chân 32 | PA29 — GPIO / peripheral function |
| Chân 33 | PA30 — GPIO / peripheral function |
| Chân 34 | PA31 — GPIO / peripheral function |
| Chân 35 | VDD — Digital power supply |
| Chân 36 | GND — Ground |
| Chân 37 | PB00 — GPIO / peripheral function |
| Chân 38 | PB01 — GPIO / peripheral function |
| Chân 39 | PB02 — GPIO / peripheral function |
| Chân 40 | PB03 — GPIO / peripheral function |
| Chân 41 | PB04 — GPIO / peripheral function |
| Chân 42 | PB05 — GPIO / peripheral function |
| Chân 43 | PB06 — GPIO / peripheral function |
| Chân 44 | PB07 — GPIO / peripheral function |
| Chân 45 | PB08 — GPIO / peripheral function |
| Chân 46 | PB09 — GPIO / peripheral function |
| Chân 47 | PB10 — GPIO / peripheral function |
| Chân 48 | PB11 — GPIO / peripheral function |
| Chân 49 | PB12 — GPIO / peripheral function |
| Chân 50 | PB13 — GPIO / peripheral function |
| Chân 51 | PB14 — GPIO / peripheral function |
| Chân 52 | PB15 — GPIO / peripheral function |
| Chân 53 | PB16 — GPIO / peripheral function |
| Chân 54 | PB17 — GPIO / peripheral function |
| Chân 55 | PB18 — GPIO / peripheral function |
| Chân 56 | PB19 — GPIO / peripheral function |
| Chân 57 | PB20 — GPIO / peripheral function |
| Chân 58 | PB21 — GPIO / peripheral function |
| Chân 59 | PB22 — GPIO / peripheral function |
| Chân 60 | PB23 — GPIO / peripheral function |
| Chân 61 | RESET — Reset input (active low) |
| Chân 62 | SWDIO — Serial Wire Debug I/O |
| Chân 63 | SWCLK — Serial Wire Debug clock |
| Chân 64 | GND — Ground (thermal pad center) |
Ứng dụng tiêu biểu
PIC32CM5164LS60064T-I/5LX phù hợp cho 6 Áp dụngs: Battery-Powered IoT Sensor Node, Secure Connected Smart Lock / Asset Tracker, Touch-Interface Industrial Control, Smart Home / Building Automation Hub, Medical Wearable / Body Monitor, Secure Payment Terminal / POS Accessory.
Battery-Powered IoT Sensor Node
The PIC32CM5164LS60064's SleepWalking peripherals and Cortex-M23 at 2.64 CoreMark/MHz fit IoT sensor nodes that must run for years on a coin cell. According to Microchip's PIC32CM LS60 family datasheet, the device inspects incoming sensor data without waking the CPU, only triggering a wake-up on threshold crossing, cutting active-mode current by up to 80% versus always-on designs. The 512 KB Flash stores over-the-air firmware update images with dual-bank support, while the 64 KB SRAM buffers sensor payloads before BLE/Wi-Fi transmit. Pair with a 3V LDO such as MCP1700 and a sensor front-end to build a wire-free environmental monitor.
Được đề xuất
Secure Connected Smart Lock / Asset Tracker
The PIC32CM5164LS60064T-I/5LX is purpose-built for connected locks and asset trackers because its integrated ATECC608 Trust Platform and Arm TrustZone provide immutable secure boot and crypto authentication without an external companion IC. According to the Microchip LS60 product page, on-die ATECC608 supports ECDSA, ECDH, SHA-256 and AES-128 hardware acceleration; TrustZone partitions memory into Secure/Non-Secure worlds so application code cannot read keys. The Cortex-M23 runs BLE provisioning stacks in the Non-Secure world while crypto operations remain isolated, lowering BOM count versus designs with a discrete ATECC608B.
Được đề xuất
Touch-Interface Industrial Control
The PIC32CM5164LS60064 integrates a touch controller and smart analog (op-amps, ADC, DAC) blocks that match industrial HMI panels and proximity-sensing interfaces. Per the Microchip family datasheet, the on-chip PTC (Peripheral Touch Controller) supports up to 256 touch channels, while the Cortex-M23 executes debouncing and gesture recognition at low active current. The industrial-grade -40C to +85C operating range and 9x9 mm VQFN footprint allow placement behind a sealed glass panel without external touch ICs. The 48 MHz CPU comfortably runs a 200 Hz touch scan loop alongside CAN or RS-485 comms for factory-floor control.
Được đề xuất
Smart Home / Building Automation Hub
The PIC32CM5164LS60064T-I/5LX fits Zigbee/BLE/Matter end devices in smart home and building automation thanks to its 512 KB Flash (room for Matter commissioning stacks), 64 KB SRAM, and Cortex-M23 with TrustZone for secure commissioning. The LS60's integrated ATECC608 stores device certificates required by Matter, allowing secure factory provisioning. SleepWalking peripherals wake the MCU only when a radio event arrives, supporting years of battery life on window sensors, leak detectors, and occupancy sensors. Industrial -40C to +85C range covers outdoor junction-box installations.
Được đề xuất
Medical Wearable / Body Monitor
The PIC32CM5164LS60064T-I/5LX suits medical wearables - heart-rate patches, continuous glucose monitors, oximeters - because SleepWalking and picoPower modes allow multi-day operation on a small Li-Ion cell. The Cortex-M23 at 48 MHz processes ECG/PPG signal chains while keeping active current under 100 uA/MHz. The integrated 12-bit ADC and op-amps form a complete analog front-end without external components. TrustZone and ATECC608 protect patient health data at rest, supporting HIPAA-compliant design. The 9x9 mm VQFN enables wearable PCB miniaturization.
Được đề xuất
Secure Payment Terminal / POS Accessory
The PIC32CM5164LS60064T-I/5LX supports PCI-friendly payment terminals and POS accessories by providing on-die ATECC608 hardware-accelerated ECDSA/AES/SHA-256 crypto for card authentication and session key derivation. The Cortex-M23 + TrustZone Secure world isolates PIN handling from the user-facing application, and the 512 KB Flash fits a payment SDK and EMV kernel. The -40C to +85C operating range supports outdoor vending/POS deployments. The 64-VQFN integrates easily with a magnetic-stripe reader or NFC front-end.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32CM5164LS60064T-I/5LX — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32CM5164LS60048T-I/5LX | PIC32CM5164LS60048-I/U5B | PIC32CM5164LS00064T-I/5LX | PIC32CM5164LS00064-I/5LX | PIC32CM5164LS60064T-I/5LX-PROTO |
|---|---|---|---|---|---|---|
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN - same | 64-VQFN - same | 64-VQFN - same | 64-VQFN - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash | 512 KB | 384 KB (-25%) | 384 KB (-25%) | 512 KB | 512 KB | 512 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Security (ATECC608 + TrustZone) | Yes (LS60) | Yes (LS60) | Yes (LS60) | No (LS00) | No (LS00) | Yes (LS60) |
| Supply Voltage | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V |
Bảo phân biệt quan trọng
- On-die ATECC608 + TrustZone eliminates external crypto IC (vsPIC32CM5164LS00064T-I/5LX)
- Largest Flash in 64-VQFN LS60 family (vsPIC32CM5164LS60048T-I/5LX)
- SleepWalking peripherals for sub-uA average current (vsGeneric Cortex-M0+ MCU)
Ghi chú thiết kế
The PIC32CM5164LS60064 operates on 2.0 V to 3.63 V and cannot accept a single-cell Li-Ion (4.2 V max) directly. Place an LDO such as MCP1700 (1.6 uA quiescent current) between the cell and VDD; add a 100 nF X7R ceramic decoupling capacitor within 3 mm of every VDD pin pair and a bulk 4.7 uF ceramic on the regulator output. For battery-powered designs, route the LDO enable line to a GPIO so the MCU can fully power-gate unused rails.
The 9x9 mm 64-VQFN package dissipates heat primarily through the central thermal pad. Connect the exposed pad (pin 64 / GND paddle) to a ground copper pour on top and bottom layers with at least 16 thermal vias (0.3 mm drill, 1 mm pitch) to a bottom-side heat-spreader. Estimated theta_JA of about 25 C/W with 4-layer 1 oz copper is sufficient for the LS60's typical 30 mW active power; verify with a junction-temperature calculation in your environment.
Do not assume the LS60 ATECC608 and LS00 firmware are interchangeable - TrustZone/secure-boot initialization differs and skipping the secure-boot sequence on the LS60 can brick the device. Also, the LS60 supply range starts at 2.0 V versus 1.62 V on the LE00; designs that migrate code between LE00 and LS60 must check brown-out thresholds. Finally, the SWD pins (SWDIO/SWCLK) share physical pads with GPIOs - configure them only after reset deassertion to avoid debug-lockout.
Thông tin tuân thủ
RoHS-compliant Green per Microchip product page. Industrial 'I' temperature grade -40C to +85C; not AEC-Q100 qualified - choose AEC-Q100 graded parts for automotive.
