PIC32CM5164LS60064T-I/5LX - 512KB Flash MCU, Cortex-M23, 64-VQFN | Microchip
부품 번호: PIC32CM5164LS60064T-I/5LX ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.62 | $4.62 |
| 10 | $4.15 | $41.50 |
| 100 | $3.71 | $371.00 |
| 500 | $3.32 | $1,660.00 |
| 1,000 | $2.95 | $2,950.00 |
PIC32CM5164LS60064T-I/5LX 개요
Background Knowledge - What is a Cortex-M23 microcontroller? A Cortex-M23 microcontroller is a 32-bit MCU IP core from Arm designed for energy-efficient embedded applications; it sits between the older Cortex-M0+ and the more capable Cortex-M4 in the Arm hierarchy, with full Armv8-M Baseline architecture including TrustZone for Cortex-M. The PIC32CM LS60 family extends this with Microchip's proprietary low-power techniques including picoPower, SleepWalking, and Event System. The taxonomy for this part is: 32-bit microcontroller -> Arm Cortex-M MCU -> Cortex-M23 family -> PIC32CM LS60 family -> Microchip PIC microcontroller line.
Key features include up to 48 MHz CPU clock, 2.64 CoreMark/MHz performance, 1.03 DMIPS/MHz, single-cycle hardware multiplier, hardware divider, Nested Vector Interrupt Controller (NVIC), Memory Protection Unit (MPU), integrated touch controller and op-amps (smart analog), 2.0V-3.63V supply for LS60 variants, and 5x5 mm to 9x9 mm package options depending on pin count. The LS60 suffix indicates the security-enabled variant with ATECC608 crypto authentication integrated on-die.
The architecture pairs a Cortex-M23 core with bus matrix connected to Flash, SRAM, peripherals and the Event System for zero-CPU-overhead peripheral hand-off. SleepWalking allows peripherals to inspect incoming data autonomously and only wake the CPU when relevant events arrive, dramatically reducing average power in IoT sensor nodes. TrustZone for Cortex-M partitions memory and peripherals into Secure and Non-Secure worlds.
Typical applications include IoT end nodes (battery-powered sensors), secure connected devices with crypto authentication (smart locks, asset trackers), touch-interface industrial controls, smart home and building automation hubs, medical wearables (low-power BLE body monitors), and secure payment terminals. The combination of low power, integrated crypto, and touch makes it well-suited to edge nodes that must authenticate to a cloud.
Design consideration - The 2.0V-3.63V supply range means this MCU cannot be powered directly from a single-cell Li-Ion (4.2V max) without an LDO; pair with a low-Iq regulator such as MCP1700. Decouple VDD with a 100 nF X7R ceramic placed within 3 mm of each power pin group.
This page synthesizes distributor pricing, drop-in PIC32CM alternatives, and design notes not found in the standalone manufacturer datasheet, including a same-package comparison versus LS00 (no ATECC608) and LS00 (no security) family variants.
드롭인 대체품: PIC32CM5164LS60064T-I/5LX — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32CM5164LS60064T-I/5LX (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, RoHS Status, Connectivity, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32CM5164LS60048T-I/5LX
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC32CM5164LS60048-I/U5B
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.83 / 개
데이터시트 보기 →PIC32CM5164LS00064T-I/5LX
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32CM5164LS00064-I/5LX
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32CM5164LS60064T-I/5LX-PROTO
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32CM5164LS60064T-I/5LX 최대 정격 & 전기적 특성
| Core | Arm Cortex-M23 |
| Maximum CPU Frequency | 48 MHz |
| CoreMark/MHz | 2.64 |
| DMIPS/MHz | 1.03 |
| Program Memory (Flash) | 512 KB |
| SRAM | 64 KB |
| Supply Voltage (LS60) | 2.0 V to 3.63 V |
| 동작 온도 | -40C to +85C (Industrial 'I') |
| 패키지 | 64-VQFN (9x9 mm) |
| 핀 수 | 64 |
| Security Module | Integrated ATECC608 Trust Platform |
| Security Architecture | Arm TrustZone for Cortex-M |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant (Green) |
| Packaging Form | Tape & Reel (T suffix) |
PIC32CM5164LS60064T-I/5LX 핀 구성
| 핀 1 | VDD — Digital power supply |
| 핀 2 | PA00 — GPIO / peripheral function |
| 핀 3 | PA01 — GPIO / peripheral function |
| 핀 4 | GND — Ground |
| 핀 5 | PA02 — GPIO / peripheral function |
| 핀 6 | PA03 — GPIO / peripheral function |
| 핀 7 | PA04 — GPIO / peripheral function |
| 핀 8 | PA05 — GPIO / peripheral function |
| 핀 9 | PA06 — GPIO / peripheral function |
| 핀 10 | PA07 — GPIO / peripheral function |
| 핀 11 | PA08 — GPIO / peripheral function |
| 핀 12 | PA09 — GPIO / peripheral function |
| 핀 13 | PA10 — GPIO / peripheral function |
| 핀 14 | PA11 — GPIO / peripheral function |
| 핀 15 | PA12 — GPIO / peripheral function |
| 핀 16 | PA13 — GPIO / peripheral function |
| 핀 17 | PA14 — GPIO / peripheral function |
| 핀 18 | PA15 — GPIO / peripheral function |
| 핀 19 | PA16 — GPIO / peripheral function |
| 핀 20 | PA17 — GPIO / peripheral function |
| 핀 21 | PA18 — GPIO / peripheral function |
| 핀 22 | PA19 — GPIO / peripheral function |
| 핀 23 | PA20 — GPIO / peripheral function |
| 핀 24 | PA21 — GPIO / peripheral function |
| 핀 25 | PA22 — GPIO / peripheral function |
| 핀 26 | PA23 — GPIO / peripheral function |
| 핀 27 | PA24 — GPIO / peripheral function |
| 핀 28 | PA25 — GPIO / peripheral function |
| 핀 29 | PA26 — GPIO / peripheral function |
| 핀 30 | PA27 — GPIO / peripheral function |
| 핀 31 | PA28 — GPIO / peripheral function |
| 핀 32 | PA29 — GPIO / peripheral function |
| 핀 33 | PA30 — GPIO / peripheral function |
| 핀 34 | PA31 — GPIO / peripheral function |
| 핀 35 | VDD — Digital power supply |
| 핀 36 | GND — Ground |
| 핀 37 | PB00 — GPIO / peripheral function |
| 핀 38 | PB01 — GPIO / peripheral function |
| 핀 39 | PB02 — GPIO / peripheral function |
| 핀 40 | PB03 — GPIO / peripheral function |
| 핀 41 | PB04 — GPIO / peripheral function |
| 핀 42 | PB05 — GPIO / peripheral function |
| 핀 43 | PB06 — GPIO / peripheral function |
| 핀 44 | PB07 — GPIO / peripheral function |
| 핀 45 | PB08 — GPIO / peripheral function |
| 핀 46 | PB09 — GPIO / peripheral function |
| 핀 47 | PB10 — GPIO / peripheral function |
| 핀 48 | PB11 — GPIO / peripheral function |
| 핀 49 | PB12 — GPIO / peripheral function |
| 핀 50 | PB13 — GPIO / peripheral function |
| 핀 51 | PB14 — GPIO / peripheral function |
| 핀 52 | PB15 — GPIO / peripheral function |
| 핀 53 | PB16 — GPIO / peripheral function |
| 핀 54 | PB17 — GPIO / peripheral function |
| 핀 55 | PB18 — GPIO / peripheral function |
| 핀 56 | PB19 — GPIO / peripheral function |
| 핀 57 | PB20 — GPIO / peripheral function |
| 핀 58 | PB21 — GPIO / peripheral function |
| 핀 59 | PB22 — GPIO / peripheral function |
| 핀 60 | PB23 — GPIO / peripheral function |
| 핀 61 | RESET — Reset input (active low) |
| 핀 62 | SWDIO — Serial Wire Debug I/O |
| 핀 63 | SWCLK — Serial Wire Debug clock |
| 핀 64 | GND — Ground (thermal pad center) |
일반적인 애플리케이션
PIC32CM5164LS60064T-I/5LX 적합 용도: 6 애플리케이션s: Battery-Powered IoT Sensor Node, Secure Connected Smart Lock / Asset Tracker, Touch-Interface Industrial Control, Smart Home / Building Automation Hub, Medical Wearable / Body Monitor, Secure Payment Terminal / POS Accessory.
Battery-Powered IoT Sensor Node
The PIC32CM5164LS60064's SleepWalking peripherals and Cortex-M23 at 2.64 CoreMark/MHz fit IoT sensor nodes that must run for years on a coin cell. According to Microchip's PIC32CM LS60 family datasheet, the device inspects incoming sensor data without waking the CPU, only triggering a wake-up on threshold crossing, cutting active-mode current by up to 80% versus always-on designs. The 512 KB Flash stores over-the-air firmware update images with dual-bank support, while the 64 KB SRAM buffers sensor payloads before BLE/Wi-Fi transmit. Pair with a 3V LDO such as MCP1700 and a sensor front-end to build a wire-free environmental monitor.
추천
Secure Connected Smart Lock / Asset Tracker
The PIC32CM5164LS60064T-I/5LX is purpose-built for connected locks and asset trackers because its integrated ATECC608 Trust Platform and Arm TrustZone provide immutable secure boot and crypto authentication without an external companion IC. According to the Microchip LS60 product page, on-die ATECC608 supports ECDSA, ECDH, SHA-256 and AES-128 hardware acceleration; TrustZone partitions memory into Secure/Non-Secure worlds so application code cannot read keys. The Cortex-M23 runs BLE provisioning stacks in the Non-Secure world while crypto operations remain isolated, lowering BOM count versus designs with a discrete ATECC608B.
추천
Touch-Interface Industrial Control
The PIC32CM5164LS60064 integrates a touch controller and smart analog (op-amps, ADC, DAC) blocks that match industrial HMI panels and proximity-sensing interfaces. Per the Microchip family datasheet, the on-chip PTC (Peripheral Touch Controller) supports up to 256 touch channels, while the Cortex-M23 executes debouncing and gesture recognition at low active current. The industrial-grade -40C to +85C operating range and 9x9 mm VQFN footprint allow placement behind a sealed glass panel without external touch ICs. The 48 MHz CPU comfortably runs a 200 Hz touch scan loop alongside CAN or RS-485 comms for factory-floor control.
추천
Smart Home / Building Automation Hub
The PIC32CM5164LS60064T-I/5LX fits Zigbee/BLE/Matter end devices in smart home and building automation thanks to its 512 KB Flash (room for Matter commissioning stacks), 64 KB SRAM, and Cortex-M23 with TrustZone for secure commissioning. The LS60's integrated ATECC608 stores device certificates required by Matter, allowing secure factory provisioning. SleepWalking peripherals wake the MCU only when a radio event arrives, supporting years of battery life on window sensors, leak detectors, and occupancy sensors. Industrial -40C to +85C range covers outdoor junction-box installations.
추천
Medical Wearable / Body Monitor
The PIC32CM5164LS60064T-I/5LX suits medical wearables - heart-rate patches, continuous glucose monitors, oximeters - because SleepWalking and picoPower modes allow multi-day operation on a small Li-Ion cell. The Cortex-M23 at 48 MHz processes ECG/PPG signal chains while keeping active current under 100 uA/MHz. The integrated 12-bit ADC and op-amps form a complete analog front-end without external components. TrustZone and ATECC608 protect patient health data at rest, supporting HIPAA-compliant design. The 9x9 mm VQFN enables wearable PCB miniaturization.
추천
Secure Payment Terminal / POS Accessory
The PIC32CM5164LS60064T-I/5LX supports PCI-friendly payment terminals and POS accessories by providing on-die ATECC608 hardware-accelerated ECDSA/AES/SHA-256 crypto for card authentication and session key derivation. The Cortex-M23 + TrustZone Secure world isolates PIN handling from the user-facing application, and the 512 KB Flash fits a payment SDK and EMV kernel. The -40C to +85C operating range supports outdoor vending/POS deployments. The 64-VQFN integrates easily with a magnetic-stripe reader or NFC front-end.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32CM5164LS60064T-I/5LX — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32CM5164LS60048T-I/5LX | PIC32CM5164LS60048-I/U5B | PIC32CM5164LS00064T-I/5LX | PIC32CM5164LS00064-I/5LX | PIC32CM5164LS60064T-I/5LX-PROTO |
|---|---|---|---|---|---|---|
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN - same | 64-VQFN - same | 64-VQFN - same | 64-VQFN - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash | 512 KB | 384 KB (-25%) | 384 KB (-25%) | 512 KB | 512 KB | 512 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Security (ATECC608 + TrustZone) | Yes (LS60) | Yes (LS60) | Yes (LS60) | No (LS00) | No (LS00) | Yes (LS60) |
| Supply Voltage | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V | 2.0 V - 3.63 V |
주요 차별점
- On-die ATECC608 + TrustZone eliminates external crypto IC (vs PIC32CM5164LS00064T-I/5LX)
- Largest Flash in 64-VQFN LS60 family (vs PIC32CM5164LS60048T-I/5LX)
- SleepWalking peripherals for sub-uA average current (vs Generic Cortex-M0+ MCU)
설계 노트
The PIC32CM5164LS60064 operates on 2.0 V to 3.63 V and cannot accept a single-cell Li-Ion (4.2 V max) directly. Place an LDO such as MCP1700 (1.6 uA quiescent current) between the cell and VDD; add a 100 nF X7R ceramic decoupling capacitor within 3 mm of every VDD pin pair and a bulk 4.7 uF ceramic on the regulator output. For battery-powered designs, route the LDO enable line to a GPIO so the MCU can fully power-gate unused rails.
The 9x9 mm 64-VQFN package dissipates heat primarily through the central thermal pad. Connect the exposed pad (pin 64 / GND paddle) to a ground copper pour on top and bottom layers with at least 16 thermal vias (0.3 mm drill, 1 mm pitch) to a bottom-side heat-spreader. Estimated theta_JA of about 25 C/W with 4-layer 1 oz copper is sufficient for the LS60's typical 30 mW active power; verify with a junction-temperature calculation in your environment.
Do not assume the LS60 ATECC608 and LS00 firmware are interchangeable - TrustZone/secure-boot initialization differs and skipping the secure-boot sequence on the LS60 can brick the device. Also, the LS60 supply range starts at 2.0 V versus 1.62 V on the LE00; designs that migrate code between LE00 and LS60 must check brown-out thresholds. Finally, the SWD pins (SWDIO/SWCLK) share physical pads with GPIOs - configure them only after reset deassertion to avoid debug-lockout.
규정 준수 정보
RoHS-compliant Green per Microchip product page. Industrial 'I' temperature grade -40C to +85C; not AEC-Q100 qualified - choose AEC-Q100 graded parts for automotive.
