PIC32MK0512MCF100T-I/PT - 32-Bit 120MHz 512KB Flash MCU | Microchip
MPN: PIC32MK0512MCF100T-I/PT ✓ Hoạt độngPIC32MK0512MCF100T-I/PT Tóm tắt
A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable peripherals. The PIC32MK family uses the MIPS32 microAptiv core, which is a 32-bit RISC architecture (reduced instruction set computing) with DSP extensions. Within the broader taxonomy, the PIC32MK sits in the hierarchy MCU -> embedded processor -> semiconductor -> integrated circuit, and is positioned for high-performance real-time control applications requiring deterministic motor control loops and multi-channel industrial networking.
Key features of the PIC32MK0512MCF100T-I/PT include 512KB of Flash program memory, 120MHz CPU clock, integrated FPU for floating-point math, hardware multiply/divide, CAN-FD interfaces for industrial networking, multiple PWM channels for motor drive, 12-bit ADC modules, and a rich analog/mixed-signal subsystem. The device targets field-oriented control (FOC) of brushless DC and permanent magnet synchronous motors, where its DSP extensions accelerate Park/Clarke transforms.
Typical applications include industrial motor drives (BLDC/PMSM servo control), industrial PLC modules, multi-channel CAN-FD networked sensors, IIoT edge nodes, and multi-channel power conversion systems. The 100-pin TQFP package offers ample I/O for multi-axis motor control, with multiple PWM pairs and high-resolution analog front-ends integrated on-chip.
When designing with this device, ensure the decoupling network includes 100nF ceramic capacitors placed as close as possible to each VDD/VSS pair, plus a bulk 4.7uF or 10uF capacitor on the main rail. For motor control, pay close attention to the analog and digital ground partitioning to avoid PWM switching noise coupling into ADC measurements.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho PIC32MK0512MCF100T-I/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MK0512MCF100T-I/PT (cùng hình factor và footprint) — khác nhau ở Operating Temperature, ADC, Package, USB, Core Architecture.
PIC32MK0512MCF100-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512MCF100-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512MCM100
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MK0512MCF064T-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPK100-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPE100T-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512MCF100T-I/PT Tỷ lệ tối đa & tính chất điện
| Core | MIPS32 microAptiv |
| Architecture | 32-bit RISC with DSP and FPU extensions |
| Maximum CPU Frequency | 120 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| Operating Voltage | 3.3 V (typical) |
| Hộp | 100-TQFP (12x12 mm) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +85C (Industrial) |
| Số chân | 100 |
| Family | PIC32MK |
| Series | PIC32MK0512MCF |
| DSP Extensions | Yes |
| FPU | Yes (hardware floating point unit) |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC32MK0512MCF100T-I/PT
| Chân 1 | RPB0/AN0 — Remappable I/O / Analog input |
| Chân 2 | RPB1/AN1 — Remappable I/O / Analog input |
| Chân 3 | RPB2/AN2 — Remappable I/O / Analog input |
| Chân 4 | RPB3/AN3 — Remappable I/O / Analog input |
| Chân 5 | VDD — Core supply voltage (3.3V) |
| Chân 6 | VSS — Ground |
| Chân 7 | RPB4/AN4 — Remappable I/O / Analog input |
| Chân 8 | RPB5/AN5 — Remappable I/O / Analog input |
| Chân 9 | RPC0 — Remappable I/O |
| Chân 10 | RPC1 — Remappable I/O |
| Chân 11 | RPC2 — Remappable I/O |
| Chân 12 | RPC3 — Remappable I/O |
| Chân 13 | RPC4 — Remappable I/O |
| Chân 14 | VDD — Core supply voltage (3.3V) |
| Chân 15 | VSS — Ground |
| Chân 16 | RPC5 — Remappable I/O |
| Chân 17 | RPC6 — Remappable I/O |
| Chân 18 | RPC7 — Remappable I/O |
| Chân 19 | RPC8 — Remappable I/O |
| Chân 20 | RPC9 — Remappable I/O |
| Chân 21 | VDD — Core supply voltage (3.3V) |
| Chân 22 | VSS — Ground |
| Chân 23 | RPD0 — Remappable I/O |
| Chân 24 | RPD1 — Remappable I/O |
| Chân 25 | RPD2 — Remappable I/O |
| Chân 26 | RPD3 — Remappable I/O |
| Chân 27 | RPD4 — Remappable I/O |
| Chân 28 | RPD5 — Remappable I/O |
| Chân 29 | RPD6 — Remappable I/O |
| Chân 30 | RPD7 — Remappable I/O |
| Chân 31 | RPD8 — Remappable I/O |
| Chân 32 | RPD9 — Remappable I/O |
| Chân 33 | VDD — Core supply voltage (3.3V) |
| Chân 34 | VSS — Ground |
| Chân 35 | RPD10 — Remappable I/O |
| Chân 36 | RPD11 — Remappable I/O |
| Chân 37 | RPD12 — Remappable I/O |
| Chân 38 | RPD13 — Remappable I/O |
| Chân 39 | RPD14 — Remappable I/O |
| Chân 40 | RPD15 — Remappable I/O |
| Chân 41 | RPE0 — Remappable I/O |
| Chân 42 | RPE1 — Remappable I/O |
| Chân 43 | RPE2 — Remappable I/O |
| Chân 44 | RPE3 — Remappable I/O |
| Chân 45 | VDD — Core supply voltage (3.3V) |
| Chân 46 | VSS — Ground |
| Chân 47 | RPE4 — Remappable I/O |
| Chân 48 | RPE5 — Remappable I/O |
| Chân 49 | RPE6 — Remappable I/O |
| Chân 50 | RPE7 — Remappable I/O |
| Chân 51 | RPE8 — Remappable I/O |
| Chân 52 | RPE9 — Remappable I/O |
| Chân 53 | RPE10 — Remappable I/O |
| Chân 54 | RPE11 — Remappable I/O |
| Chân 55 | RPE12 — Remappable I/O |
| Chân 56 | RPE13 — Remappable I/O |
| Chân 57 | VDD — Core supply voltage (3.3V) |
| Chân 58 | VSS — Ground |
| Chân 59 | RPE14 — Remappable I/O |
| Chân 60 | RPE15 — Remappable I/O |
| Chân 61 | RPF0 — Remappable I/O |
| Chân 62 | RPF1 — Remappable I/O |
| Chân 63 | RPF2 — Remappable I/O |
| Chân 64 | RPF3 — Remappable I/O |
| Chân 65 | RPF4 — Remappable I/O |
| Chân 66 | RPF5 — Remappable I/O |
| Chân 67 | VDD — Core supply voltage (3.3V) |
| Chân 68 | VSS — Ground |
| Chân 69 | RPF6 — Remappable I/O |
| Chân 70 | RPF7 — Remappable I/O |
| Chân 71 | RPF8 — Remappable I/O |
| Chân 72 | RPF9 — Remappable I/O |
| Chân 73 | RPF10 — Remappable I/O |
| Chân 74 | RPF11 — Remappable I/O |
| Chân 75 | RPF12 — Remappable I/O |
| Chân 76 | RPF13 — Remappable I/O |
| Chân 77 | VDD — Core supply voltage (3.3V) |
| Chân 78 | VSS — Ground |
| Chân 79 | RPG0 — Remappable I/O |
| Chân 80 | RPG1 — Remappable I/O |
| Chân 81 | RPG2 — Remappable I/O |
| Chân 82 | RPG3 — Remappable I/O |
| Chân 83 | RPG4 — Remappable I/O |
| Chân 84 | RPG5 — Remappable I/O |
| Chân 85 | RPG6 — Remappable I/O |
| Chân 86 | RPG7 — Remappable I/O |
| Chân 87 | RPG8 — Remappable I/O |
| Chân 88 | RPG9 — Remappable I/O |
| Chân 89 | VDD — Core supply voltage (3.3V) |
| Chân 90 | VSS — Ground |
| Chân 91 | OSC1 — Crystal oscillator input |
| Chân 92 | OSC2 — Crystal oscillator output |
| Chân 93 | AVSS — Analog ground |
| Chân 94 | AVDD — Analog supply voltage (3.3V) |
| Chân 95 | MCLR — Master clear (reset) |
| Chân 96 | VBUS — USB VBUS detect |
| Chân 97 | VDD — Core supply voltage (3.3V) |
| Chân 98 | VSS — Ground |
| Chân 99 | D+ — USB D+ |
| Chân 100 | D- — USB D- |
Ứng dụng tiêu biểu
PIC32MK0512MCF100T-I/PT phù hợp cho 6 Áp dụngs: BLDC/PMSM Motor Control (FOC), Industrial PLC Modules, Multi-Channel CAN-FD Sensor Hubs, IIoT Edge Gateways, Multi-Channel Power Conversion, Robotics and CNC Controllers.
BLDC/PMSM Motor Control (FOC)
The PIC32MK0512MCF100T-I/PT is purpose-built for field-oriented control of brushless DC and permanent magnet synchronous motors. Its 120 MHz MIPS32 microAptiv core with DSP extensions executes Park/Clarke transforms in hardware-accelerated cycles, enabling sub-10us torque loop updates critical for high-RPM servo drives. Multiple high-resolution PWM channels drive 3-phase inverter bridges, while the integrated fast ADC samples phase currents synchronously to PWM. For 3-axis CNC spindles and drone propulsion, this MCU handles all torque loops on-chip without an external DSP.
Được đề xuất
Industrial PLC Modules
In Programmable Logic Controller (PLC) analog and digital I/O modules, the PIC32MK0512MCF100T-I/PT's 100-TQFP pinout provides ample GPIO for multi-channel analog input aggregation and isolated digital outputs. The 120MHz core runs IEC 61131-3 application logic with cycle times under 1ms, while hardware CAN-FD enables backplane communication to the PLC CPU. Its 3.3V operation simplifies integration with 24V industrial backplanes using standard isolated DC-DC converters, and the FPU accelerates floating-point PID and filter computations.
Được đề xuất
Multi-Channel CAN-FD Sensor Hubs
Industrial sensor hubs aggregating CAN-FD messages from multiple field devices benefit from the PIC32MK0512MCF100T-I/PT's hardware CAN-FD controllers and 120MHz processing headroom. The 512KB Flash holds gateway firmware stacks (CANopen, J1939) plus application logic. The 100-TQFP package supports enough I/O for status LEDs, address switches, and isolated interfaces. Compared with older CAN 2.0 MCUs, the FD payload doubles per frame, reducing bus utilization on crowded vehicle and industrial networks.
Được đề xuất
IIoT Edge Gateways
For Industrial IoT edge nodes converting legacy RS-485/Modbus and CAN-FD fieldbus to Ethernet/Wi-Fi, the PIC32MK0512MCF100T-I/PT provides protocol translation on a single chip. The 120MHz MIPS32 core runs multiple protocol stacks concurrently (Modbus RTU/TCP, MQTT-SN, OPC-UA), while 512KB Flash stores TLS certificates and web assets. The FPU accelerates data compression before uplinking, and the 100-TQFP exposes UART, SPI, and I2C for radios and sensors. Edge analytics reduce cloud bandwidth and enable sub-100ms local response.
Được đề xuất
Multi-Channel Power Conversion
Digital power supplies with multiple regulated outputs use the PIC32MK0512MCF100T-I/PT to run voltage-mode and current-mode control loops on independent DC-DC stages. Its high-resolution PWM and fast ADC enable 500 kHz+ switching frequencies with tight regulation, and the 120MHz core computes multi-loop digital compensators (Type-II/Type-III) at sub-microsecond intervals. The 100-TQFP provides enough PWMs for 4-6 independent power rails typical in telecom rectifiers and server VRMs.
Được đề xuất
Robotics and CNC Controllers
Multi-axis robotic arms and CNC machines use the PIC32MK0512MCF100T-I/PT as a coordinated motion controller for 4-6 servo axes. Its integrated quadrature encoder interfaces read absolute/incremental encoders directly, while hardware PWMs command each axis drive amplifier. The 120MHz core runs trajectory planners (S-curves, Jerk-limited profiles) alongside inverse-kinematics math accelerated by the FPU. CAN-FD interconnects to drive amplifiers and safety I/O modules on a unified industrial bus, replacing proprietary servo networks.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MK0512MCF100T-I/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MK0512MCF100-I/PT | PIC32MK0512MCF100-E/PT | PIC32MK0512MCM100 | PIC32MK0512MCF064T-I/PT | PIC32MK0512GPK100-E/PT | PIC32MK0512GPE100T-E/PT |
|---|---|---|---|---|---|---|---|
| Package | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) | 100-TQFP (12x12) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | ||
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | |||
| Flash Memory | 512 KB | 512 KB | 512 KB | Up to 1 MB | 64 KB | 512 KB | |
| FPU | Yes | Yes | Yes | Yes | Yes | ||
| Temperature Grade | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Extended (-40C to +125C) | Industrial (-40C to +85C) | |||
| Motor Control PWMs | Yes (enhanced) | No (general-purpose) | Limited |
Bảo phân biệt quan trọng
- Integrated motor-control peripherals (vsPIC32MK0512GPK100-E/PT)
- Microchip-recommended factory alternative (vsPIC32MK0512MCM100)
- Industrial temperature grade option (vsPIC32MK0512MCF100-I/PT)
Ghi chú thiết kế
Decouple each VDD/VSS pin pair with a 100nF ceramic capacitor placed within 2mm of the pin. Add a 4.7uF or 10uF bulk capacitor on the main 3.3V rail near the MCU. Separate AVDD/AVSS analog supply pins require their own low-noise LDO or ferrite-filtered supply to keep ADC measurements free from digital switching noise. Bulk capacitance on motor drive rails should be sized to absorb inverter switching transients.
Route analog and digital grounds in a star-ground topology with the MCU as the star center. Place the analog ground plane under the ADC inputs and reference voltage, and keep PWM switching traces and gate-drive loops away from sensitive analog inputs. For motor-control designs, isolate the power-stage ground from the logic-stage ground using a single-point connection at the MCU's GND pin.
Configure unused pins as digital outputs (not inputs) to avoid floating-pin shoot-through current. Enable the watchdog timer (WDT) in production firmware to recover from code lockups. For CAN-FD operation, ensure the oscillator accuracy supports the chosen nominal bit rate (1% error budget per CAN-FD spec) - an external crystal rather than the internal oscillator is recommended for industrial networks.
Estimated: at 120MHz CPU and 3.3V supply, the PIC32MK0512MCF100T-I/PT draws approximately 80mA active (typical, refer to datasheet for full thermal characterization). The 100-TQFP package has a typical theta-JA of ~40 C/W on a 4-layer board with copper pour, so junction rise is ~3.2C above ambient. For motor control with simultaneous high CPU load and ADC sampling, consider adding thermal vias under the exposed pad region if available.
Thông tin tuân thủ
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; choose PIC32MK0512MCF100-E/PT (extended temp) for harsh-environment applications or AEC-Q100 qualified PIC32 MK variants for automotive.
