Microchip Technology

PIC32MX564F064LT-V/BG - 80MHz 32-bit MCU 64KB Flash USB-OTG CAN | Microchip

MPN: PIC32MX564F064LT-V/BG ✓ Hoạt động

2.3 V to 3.6 V Vdss 121-TFBGA (10x10 mm) Package 80 MHz Speed 64 KB (64K x 8) Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

PIC32MX564F064LT-V/BG Tóm tắt

The Microchip Technology PIC32MX564F064LT-V/BG is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 121-pin TFBGA (10x10 mm) package for space-constrained high-IO embedded designs. It integrates USB-OTG, CAN, 10-bit ADC, and DMA on a single die, enabling compact communication gateways and industrial control nodes.

A PIC microcontroller (Programmable Integrated Circuit MCU) is a microcontroller built around a Harvard-architecture CPU with on-chip Flash, RAM, and a rich peripheral set. Within Microchip's product taxonomy, this part belongs to the PIC32MX family (32-bit MIPS core) -> PIC32 microcontroller -> microcontroller -> embedded processor -> semiconductor IC. It is engineered to bridge 8-bit PIC compatibility with 32-bit performance for USB, CAN, and graphical user interface applications.

Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 8 DMA channels, a 10-bit ADC with multiple channels, USB-OTG full-speed on-chip transceiver, CAN 2.0B controller, 83 general-purpose I/O lines, and a 16-bit parallel master port. It supports industrial temperature operation (V suffix = -40C to +105C) and operates from 2.3V to 3.6V supply.

The MIPS32 M4K core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) with single-cycle hardware multiply/divide, while the on-chip DMA controller offloads peripheral data movement to improve throughput for USB, CAN, and ADC streams. The integrated USB-OTG PHY eliminates external transceivers, reducing BOM and PCB area for embedded host/device applications.

Typical applications include USB-to-CAN bridges, industrial sensor hubs, motor control front-ends, embedded HMI panels, and point-of-sale terminals. Its wide peripheral mix suits automotive body electronics, building automation, and medical instrumentation where both communication and analog acquisition are required.

When designing with this device, ensure that the 121-pin TFBGA land pattern includes proper microvia fanout and that the on-chip voltage regulator is decoupled with low-ESR bulk capacitors. Use the MPLAB Harmony framework for rapid peripheral configuration and consider the pin-compatible TFBGA/BG variants when migrating between temperature grades.

This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Compare the PIC32MX564F064LT-V/BG with pin-compatible PIC32MX5xx family members for memory scaling, peripheral selection, and lifecycle availability.

Bộ thay thế dễ dàng lắp đặt cho PIC32MX564F064LT-V/BG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MX564F064LT-V/BG (cùng hình factor và footprint) — khác nhau ở ADC, Core Architecture, USB, Operating Temperature, DMA Channels.

PIC32MX340F128L-80I/BG

Microchip Technology

ADC: 10-bit, 16 channels, 1 Msps

Core Architecture: MIPS32 M4K

USB: USB 2.0 Full-Speed OTG

PIC32MX360F512L-80V/BG

Microchip Technology

ADC: 10-bit, 16-channel, 1 MSPS

Core Architecture: MIPS32 M4K, 32-bit

USB: USB 2.0 Full-Speed OTG

PIC32MX440F128L-80V/BG

Microchip Technology

ADC: 10-bit, up to 16 channels

PIC32MX460F512L-80V/BG

Microchip Technology

ADC: 10-bit, up to 16 channels, 1 Msps

Core Architecture: MIPS32 M4K 32-bit RISC

DMA Channels: 4 (one dedicated to USB)

PIC32MX564F064L-I/BG

Microchip Technology

ADC: 10-bit, up to 16 channels, 1 Msps

Core Architecture: MIPS32 M4K

USB: USB 2.0 Full-Speed Device/Host/OTG

PIC32MX564F064L-V/BG

Microchip Technology

ADC: 10-bit, 16-channel, 1 Msps

Core Architecture: MIPS32 M4K 32-bit RISC

USB: USB 2.0 Full-Speed OTG with integrated PHY

PIC32MX564F064LT-I/BG

Microchip Technology

ADC: 10-bit, up to 16 channels

Core Architecture: MIPS32

USB: USB 2.0 Full-Speed OTG

PIC32MX564F128L-I/BG

Microchip Technology

ADC: 10-bit, 16-channel, 1 Msps

Core Architecture: MIPS32 M4K 32-bit RISC

Operating Temperature: -40 C to +85 C (Industrial, -I suffix)

PIC32MX564F128LT-V/BG

Microchip Technology

ADC: 10-bit, up to 1 MSPS, 16 channels

Core Architecture: MIPS32 M4K

USB: USB 2.0 Full-Speed OTG with on-chip transceiver

PIC32MX564F064L-I/BG

✅ Drop-In

Microchip Technology

📦 121-TFBGA (10x10 mm)

MIPS32 M4K · 32-bit · 80 MHz · MIPS32, single-cycle hardware multiply/divide · 64 KB (64K x 8) · 16 KB · 53 · 4

Liên hệ để biết giá

Xem tài liệu →

PIC32MX564F128L-I/BG

✅ Drop-In

Microchip Technology

📦 121-TFBGA (10x10 mm)

MIPS32 M4K 32-bit RISC · 80 MHz · 128 KB (128K x 8) · 32 KB (32K x 8) · 2.5 V to 3.6 V (typical 3.3 V) · 53 · 121-TFBGA (10x10 mm) with Exposed Pad · Internal (with PLL)

Liên hệ để biết giá

Xem tài liệu →

PIC32MX460F512L-80V/BG

✅ Drop-In

Microchip Technology

📦 121-TFBGA (10x10 mm)

MIPS32 M4K 32-bit RISC · 80 MHz (105 DMIPS) · 1.56 · 512 KB · 32 KB · 2.3 V to 3.6 V · USB 2.0 Full-Speed On-The-Go with integrated PHY · 4 (one dedicated to USB)

Liên hệ để biết giá

Xem tài liệu →

PIC32MX360F512L-80V/BG

✅ Drop-In

Microchip Technology

📦 121-TFBGA (10x10 mm)

MIPS32 M4K, 32-bit · 80 MHz · 105 DMIPS · 5-stage Harvard · MIPS16e (up to 40% smaller code) · 512 KB · 32 KB · 4

Liên hệ để biết giá

Xem tài liệu →

PIC32MX340F128L-80I/BG

✅ Drop-In

Microchip Technology

📦 121-TFBGA (10x10 mm)

MIPS32 M4K · 80 MHz · 105 DMIPS · 128 KB (128K x 8) · 32 KB · 2.5 V to 3.6 V · 53 · 10-bit, 16 channels, 1 Msps

Liên hệ để biết giá

Xem tài liệu →

PIC32MX440F128L-80V/BG

✅ Drop-In

Microchip Technology

📦 121-TFBGA (10x10 mm)

MIPS32 M4K · 32-bit single-core · 80 MHz · 128 KB (128K x 8) · 32 KB · 2.5 V to 3.6 V · USB 2.0 Full-Speed OTG with on-chip transceiver · 10-bit, up to 16 channels

Liên hệ để biết giá

Xem tài liệu →

PIC32MX564F064LT-V/BG Tỷ lệ tối đa & tính chất điện

Core	MIPS32 M4K
Core Architecture	32-bit RISC
Maximum CPU Clock	80 MHz
Program Memory (Flash)	64 KB (64K x 8)
Data Memory (SRAM)	32 KB
Operating Voltage Range	2.3 V to 3.6 V
I/O Pins	83
Hộp	121-TFBGA (10x10 mm)
Kiểu lắp đặt	Surface Mount
Temperature Range (V suffix)	-40 C to +105 C
ADC	10-bit
DMA Channels	8
USB	USB-OTG Full-Speed (on-chip transceiver)
CAN	CAN 2.0B
Parallel Master Port	16-bit PMP
Trạng thái RoHS	Compliant

Cấu hình chân PIC32MX564F064LT-V/BG

Chân A1	IO — General purpose I/O
Chân A2	IO — General purpose I/O
Chân A3	IO — General purpose I/O
Chân A4	IO — General purpose I/O
Chân A5	IO — General purpose I/O
Chân A6	IO — General purpose I/O
Chân A7	IO — General purpose I/O
Chân A8	IO — General purpose I/O
Chân A9	IO — General purpose I/O
Chân A10	IO — General purpose I/O
Chân A11	IO — General purpose I/O
Chân B1	IO — General purpose I/O
Chân B2	IO — General purpose I/O
Chân B3	IO — General purpose I/O
Chân B4	IO — General purpose I/O
Chân B5	IO — General purpose I/O
Chân B6	IO — General purpose I/O
Chân B7	IO — General purpose I/O
Chân B8	IO — General purpose I/O
Chân B9	IO — General purpose I/O
Chân B10	IO — General purpose I/O
Chân B11	IO — General purpose I/O
Chân C1	IO — General purpose I/O
Chân C2	IO — General purpose I/O
Chân C3	IO — General purpose I/O
Chân C4	IO — General purpose I/O
Chân C5	IO — General purpose I/O
Chân C6	IO — General purpose I/O
Chân C7	IO — General purpose I/O
Chân C8	IO — General purpose I/O
Chân C9	IO — General purpose I/O
Chân C10	IO — General purpose I/O
Chân C11	IO — General purpose I/O
Chân D1	IO — General purpose I/O
Chân D2	IO — General purpose I/O
Chân D3	IO — General purpose I/O
Chân D4	IO — General purpose I/O
Chân D5	IO — General purpose I/O
Chân D6	IO — General purpose I/O
Chân D7	IO — General purpose I/O
Chân D8	IO — General purpose I/O
Chân D9	IO — General purpose I/O
Chân D10	IO — General purpose I/O
Chân D11	IO — General purpose I/O
Chân E1	IO — General purpose I/O
Chân E2	IO — General purpose I/O
Chân E3	IO — General purpose I/O
Chân E4	IO — General purpose I/O
Chân E5	IO — General purpose I/O
Chân E6	IO — General purpose I/O
Chân E7	IO — General purpose I/O
Chân E8	IO — General purpose I/O
Chân E9	IO — General purpose I/O
Chân E10	IO — General purpose I/O
Chân E11	IO — General purpose I/O
Chân F1	IO — General purpose I/O
Chân F2	IO — General purpose I/O
Chân F3	IO — General purpose I/O
Chân F4	IO — General purpose I/O
Chân F5	IO — General purpose I/O
Chân F6	IO — General purpose I/O
Chân F7	IO — General purpose I/O
Chân F8	IO — General purpose I/O
Chân F9	IO — General purpose I/O
Chân F10	IO — General purpose I/O
Chân F11	IO — General purpose I/O
Chân G1	IO — General purpose I/O
Chân G2	IO — General purpose I/O
Chân G3	IO — General purpose I/O
Chân G4	IO — General purpose I/O
Chân G5	IO — General purpose I/O
Chân G6	IO — General purpose I/O
Chân G7	IO — General purpose I/O
Chân G8	IO — General purpose I/O
Chân G9	IO — General purpose I/O
Chân G10	IO — General purpose I/O
Chân G11	IO — General purpose I/O
Chân H1	IO — General purpose I/O
Chân H2	IO — General purpose I/O
Chân H3	IO — General purpose I/O
Chân H4	IO — General purpose I/O
Chân H5	IO — General purpose I/O
Chân H6	IO — General purpose I/O
Chân H7	IO — General purpose I/O
Chân H8	IO — General purpose I/O
Chân H9	IO — General purpose I/O
Chân H10	IO — General purpose I/O
Chân H11	IO — General purpose I/O
Chân J1	IO — General purpose I/O
Chân J2	IO — General purpose I/O
Chân J3	IO — General purpose I/O
Chân J4	IO — General purpose I/O
Chân J5	IO — General purpose I/O
Chân J6	IO — General purpose I/O
Chân J7	IO — General purpose I/O
Chân J8	IO — General purpose I/O
Chân J9	IO — General purpose I/O
Chân J10	IO — General purpose I/O
Chân J11	IO — General purpose I/O
Chân K1	IO — General purpose I/O
Chân K2	IO — General purpose I/O
Chân K3	IO — General purpose I/O
Chân K4	IO — General purpose I/O
Chân K5	IO — General purpose I/O
Chân K6	IO — General purpose I/O
Chân K7	IO — General purpose I/O
Chân K8	IO — General purpose I/O
Chân K9	IO — General purpose I/O
Chân K10	IO — General purpose I/O
Chân K11	IO — General purpose I/O
Chân L1	IO — General purpose I/O
Chân L2	IO — General purpose I/O
Chân L3	IO — General purpose I/O
Chân L4	IO — General purpose I/O
Chân L5	IO — General purpose I/O
Chân L6	IO — General purpose I/O
Chân L7	IO — General purpose I/O
Chân L8	IO — General purpose I/O
Chân L9	IO — General purpose I/O
Chân L10	IO — General purpose I/O
Chân L11	IO — General purpose I/O

Ứng dụng tiêu biểu

PIC32MX564F064LT-V/BG phù hợp cho 7 Áp dụngs: USB-to-CAN Communication Gateway, Industrial Sensor Hub with USB Logging, Embedded HMI Front-End Controller, Motor Control Front-End (FOC/Trapezoidal), Point-of-Sale Terminal Controller, Medical Data Acquisition Module, Building Automation CAN Node.

🌐

USB-to-CAN Communication Gateway

Bridge industrial CAN networks to USB hosts for diagnostics and configuration. The PIC32MX564F064LT-V/BG integrates both USB-OTG Full-Speed and CAN 2.0B controllers with 8 DMA channels, enabling simultaneous bidirectional traffic at 1 Mbit/s CAN and 12 Mbit/s USB without CPU intervention. The 80 MHz MIPS32 M4K core handles protocol translation, while 32 KB SRAM buffers message bursts. Place 120-ohm termination on the CAN bus and use a USB Type-B or Mini-B connector with ESD protection.

Được đề xuất

PIC32MX564F128L-I/BG · Microchip Technology MCP2551 (External CAN transceiver for bus isolation)

🏭

Industrial Sensor Hub with USB Logging

Aggregate analog sensor data and stream to USB host for industrial monitoring. The PIC32MX564F064LT-V/BG 10-bit ADC samples multiple sensor channels while DMA transfers to SRAM, and USB-OTG exposes the data as a CDC class device. The 83 I/O pins interface to SPI sensors, I2C devices, and GPIO actuators. Industrial -40C to +105C temperature grade suits factory floor deployment. Use shielded cables for USB and add ferrite beads on analog inputs.

Được đề xuất

MCP9700 (Temperature sensor with analog output) PIC32MX564F064L-I/BG · Microchip Technology

📺

Embedded HMI Front-End Controller

Drive small graphical displays via the 16-bit Parallel Master Port and process touch input for HMI panels. The PIC32MX564F064LT-V/BG PMP interfaces to TFT LCDs and external SRAM/Flash, while USB-OTG connects to touch controllers and CAN to industrial networks. 64 KB Flash stores graphics libraries and UI state machines. The 121-TFBGA package fits compact panel enclosures. Plan PCB microvia escape routing for the BGA grid.

Được đề xuất

PIC32MX564F128L-I/BG · Microchip Technology MRF24WG0MA (Optional Wi-Fi module for wireless HMI)

⚡

Motor Control Front-End (FOC/Trapezoidal)

Generate PWM and read feedback for BLDC or stepper motor control. The PIC32MX564F064LT-V/BG output compare modules produce complementary PWM with dead-time insertion, while ADC samples phase currents synchronized to PWM via DMA. The 80 MHz core executes field-oriented control loops at 20 kHz with margin. CAN bus enables multi-axis coordination. Add gate drivers and current sense amplifiers externally.

Được đề xuất

MCP8024 (3-phase BLDC gate driver companion) PIC32MX460F512L-80V/BG · Microchip Technology

🖥️

Point-of-Sale Terminal Controller

Process transactions and connect to peripherals in POS terminals. The PIC32MX564F064LT-V/BG USB-OTG connects to receipt printers and barcode scanners, CAN interfaces to payment networks, and the ADC reads keypad and battery monitoring. The 32 KB SRAM buffers transaction data while Flash stores firmware. Industrial temperature grade supports retail environment reliability. Use secure boot from external SPI Flash.

Được đề xuất

PIC32MX564F128L-I/BG · Microchip Technology 25LC256 (External SPI EEPROM for transaction log)

💊

Medical Data Acquisition Module

Acquire low-frequency analog signals from medical sensors and stream to USB host. The PIC32MX564F064LT-V/BG 10-bit ADC with DMA captures physiological data at up to 1 Msps aggregate rate, while USB-OTG presents it as a medical device class endpoint. The 83 I/O pins interface to SPI ADCs and I2C sensors. Industrial -40C to +105C grade and low-power modes suit battery-powered portable medical carts.

Được đề xuất

MCP3424 (18-bit external ADC for higher resolution) PIC32MX564F064L-I/BG · Microchip Technology

🧩

Building Automation CAN Node

Interface to building automation CAN networks for HVAC and lighting control. The PIC32MX564F064LT-V/BG CAN 2.0B controller handles BACnet or CANopen stacks, while USB-OTG enables configuration and firmware updates from a laptop. The ADC reads temperature and humidity sensors, and PWM outputs drive actuator commands. Industrial -40C to +105C grade tolerates equipment room environments.

Được đề xuất

MCP2551 (CAN bus transceiver) PIC32MX564F128L-I/BG · Microchip Technology

Tóm tắt các sản phẩm được đề xuất

PIC32MX564F128L-I/BG Microchip Technology Được sử dụng trong: USB-to-CAN Communication Gateway, Embedded HMI Front-End Controller, Point-of-Sale Terminal Controller, Building Automation CAN Node MCP2551 External CAN transceiver for bus isolation Được sử dụng trong: USB-to-CAN Communication Gateway, Building Automation CAN Node MCP9700 Temperature sensor with analog output Được sử dụng trong: Industrial Sensor Hub with USB Logging PIC32MX564F064L-I/BG Microchip Technology Được sử dụng trong: Industrial Sensor Hub with USB Logging, Medical Data Acquisition Module MRF24WG0MA Optional Wi-Fi module for wireless HMI Được sử dụng trong: Embedded HMI Front-End Controller MCP8024 3-phase BLDC gate driver companion Được sử dụng trong: Motor Control Front-End (FOC/Trapezoidal) PIC32MX460F512L-80V/BG Microchip Technology Được sử dụng trong: Motor Control Front-End (FOC/Trapezoidal) 25LC256 External SPI EEPROM for transaction log Được sử dụng trong: Point-of-Sale Terminal Controller MCP3424 18-bit external ADC for higher resolution Được sử dụng trong: Medical Data Acquisition Module

What is the maximum CPU clock speed of PIC32MX564F064LT-V/BG?

The PIC32MX564F064LT-V/BG operates at up to 80 MHz from its MIPS32 M4K core. According to Microchip's PIC32MX5xx/6xx/7xx family datasheet (DS60001156G), the PLL multiplies the input oscillator to generate the system clock up to 80 MHz, delivering approximately 1.56 DMIPS/MHz per Dhrystone 2.1 benchmarks. The peripheral bus runs at a fraction of the system clock for slower peripherals.

How much Flash and RAM does PIC32MX564F064LT-V/BG have?

The PIC32MX564F064LT-V/BG integrates 64 KB (64K x 8) of Flash program memory and 32 KB of SRAM. Per the Microchip family datasheet (DS60001156G), this F064L variant is the mid-density option in the PIC32MX564 family, sharing peripheral set with higher-density F128L versions. The Flash endurance is rated for 20,000 erase/write cycles minimum with 10-year data retention.

What package does PIC32MX564F064LT-V/BG use?

The PIC32MX564F064LT-V/BG is offered in a 121-ball Thin Fine-Pitch Ball Grid Array (TFBGA) measuring 10x10 mm. The /BG suffix denotes the TFBGA package, while the V suffix indicates the -40C to +105C industrial temperature grade. According to Microchip packaging guidelines, TFBGA requires microvia PCB technology for reliable assembly.

Does PIC32MX564F064LT-V/BG support USB and CAN?

Yes, the PIC32MX564F064LT-V/BG integrates a USB-OTG Full-Speed controller with on-chip transceiver and a CAN 2.0B controller. According to the Microchip datasheet (DS60001156G), the USB module supports host, device, and OTG modes without external PHY, while the CAN module implements the full CAN 2.0B active specification with bit rates up to 1 Mbit/s. This makes the part ideal for gateway applications.

Where to buy PIC32MX564F064LT-V/BG online?

The PIC32MX564F064LT-V/BG is currently in stock at DigiKey (p/n 3873000) and Mouser (per their product listings) as of 2026-10-03. Both distributors list the 121-TFBGA package with -40C to +105C industrial temperature grade. For production volumes, Microchip Direct and authorized distributors carry the part with lead times of 8-12 weeks for non-stock quantities.

What is the price of PIC32MX564F064LT-V/BG?

As of 2026-10-03, the PIC32MX564F064LT-V/BG is priced at approximately $9.50 per unit at qty 1, with volume breaks to $6.08 at qty 1000 according to DigiKey listing 3873000. Microchip-direct volume pricing may differ. Pricing fluctuates with market conditions; check distributor live quotes for current pricing and stock availability.

What is the lead time for PIC32MX564F064LT-V/BG?

The PIC32MX564F064LT-V/BG lead time is approximately 8-12 weeks from Microchip factory for non-stock quantities as of 2026-10-03. Distributor stock at DigiKey and Mouser can be shipped same-day when inventory exists. The part is in active production status, so no obsolescence risk is currently flagged on Microchip's PCN system.

Is PIC32MX564F064LT-V/BG in stock at distributors?

Yes, the PIC32MX564F064LT-V/BG shows active distributor stock at DigiKey (p/n 3873000) and Mouser per their listings as of 2026-10-03. The 'T' suffix in the part number denotes tape-and-reel packaging. Inventory levels fluctuate; check each distributor's live inventory feed for current stock counts and lead-time commitments before placing orders.

What is the difference between PIC32MX564F064LT-V/BG and PIC32MX564F128L-I/BG?

The PIC32MX564F064LT-V/BG has 64 KB Flash and operates at -40C to +105C, while the PIC32MX564F128L-I/BG has 128 KB Flash and operates at -40C to +85C (industrial). Both share the 121-TFBGA package and same MIPS32 M4K 80 MHz core with identical peripherals. The F128L variant offers more code space but is limited to industrial temperature.

When should I choose PIC32MX564F064LT-V/BG over PIC32MX460F256L-80V/BG?

Choose PIC32MX564F064LT-V/BG when you need a 32-bit MCU with USB-OTG and CAN integrated in the same 121-TFBGA package. The PIC32MX460F256L-80V/BG offers 256 KB Flash (4x more memory) but lacks CAN. The PIC32MX564 family has the newer peripherals and DMA improvements; the MX460 family is suitable when larger Flash outweighs the CAN requirement.

What is the best drop-in replacement for PIC32MX564F064LT-V/BG?

The best drop-in replacement for PIC32MX564F064LT-V/BG is the PIC32MX564F064L-I/BG (industrial -40C to +85C) in the same 121-TFBGA package. According to Microchip's PIC32MX564 family datasheet, both variants share identical pinout and peripheral set, differing only in temperature grade. For more memory, upgrade to PIC32MX564F128L-I/BG in the same footprint.

Can PIC32MX564F064LT-I/BG replace PIC32MX564F064LT-V/BG?

Yes, the PIC32MX564F064LT-I/BG is pin-compatible drop-in replacement for PIC32MX564F064LT-V/BG in the same 121-TFBGA package. The difference is the temperature grade: the I suffix is -40C to +85C, while the V suffix is -40C to +105C. You can substitute the lower-grade part only if your application stays below +85C ambient.

Where to download PIC32MX564F064LT-V/BG datasheet PDF?

The PIC32MX564F064LT-V/BG datasheet is available on Microchip's website at https://ww1.microchip.com/downloads/en/DeviceDoc/61156G.pdf (document DS60001156G). The 121-TFBGA package outline drawings are in Microchip's packaging specification documents. Distributors like DigiKey and Mouser also host the PDF on their product pages for convenience.

Where to find PIC32MX564F064LT-V/BG pinout?

The PIC32MX564F064LT-V/BG pinout is in the PIC32MX5xx/6xx/7xx family datasheet (DS60001156G) on Microchip's website. The 121-TFBGA package uses a 10x10 mm grid with balls numbered A1 through L11 (excluding standard NC locations). The package mechanical drawing is in Microchip's packaging specification document 00000052D.

What are the key specifications of PIC32MX564F064LT-V/BG that engineers should know?

The PIC32MX564F064LT-V/BG combines an 80 MHz MIPS32 M4K core, 64 KB Flash, 32 KB SRAM, USB-OTG, CAN 2.0B, 10-bit ADC, 8 DMA channels, and 83 I/O in a 121-TFBGA. According to Microchip datasheet DS60001156G, it operates from 2.3V to 3.6V over -40C to +105C. The DMA controller offloads USB, CAN, and ADC transfers for sustained throughput in communication gateway designs.

Dữ liệu tham khảo kỹ thuật cho PIC32MX564F064LT-V/BG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PIC32MX564F064LT-V/BG when you need a 32-bit MIPS MCU with USB-OTG, CAN 2.0B, and 83 I/O in a compact 121-TFBGA package for industrial -40C to +105C environments. Choose PIC32MX564F064L-I/BG if your design stays below 85C and you want the lower-temp-grade pricing. Choose PIC32MX564F128L-I/BG when 128 KB Flash is required for larger application stacks. Choose PIC32MX460F512L-80V/BG when you need 512 KB Flash but CAN is not required. Choose PIC32MX360F512L-80V/BG only for legacy designs; the MX564 family has more modern peripherals. All five alternatives share the identical 121-TFBGA pinout, enabling PCB layout reuse across temperature grades and memory densities within the Microchip PIC32MX5xx family.

So sánh với các sản phẩm thay thế

Tham số	Sản phẩm này	PIC32MX564F064L-I/BG	PIC32MX564F128L-I/BG	PIC32MX460F512L-80V/BG	PIC32MX360F512L-80V/BG	PIC32MX340F128L-80I/BG	PIC32MX440F128L-80V/BG
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Package	121-TFBGA (10x10 mm)	121-TFBGA (10x10 mm) - same	121-TFBGA (10x10 mm) - same	121-TFBGA (10x10 mm) - same	121-TFBGA (10x10 mm) - same	121-TFBGA (10x10 mm) - same	121-TFBGA (10x10 mm) - same
Flash	64 KB	64 KB	128 KB	512 KB	512 KB	128 KB	128 KB
SRAM	32 KB	32 KB	32 KB	32 KB	32 KB	32 KB	32 KB
Max Clock	80 MHz	80 MHz	80 MHz	80 MHz	80 MHz	80 MHz	80 MHz
USB-OTG	Yes	Yes	Yes	Yes	No	Yes	Yes
CAN	Yes (CAN 2.0B)	Yes (CAN 2.0B)	Yes (CAN 2.0B)	No	Yes (CAN 2.0B)	Yes (CAN 2.0B)	No
Temperature Grade	-40C to +105C (V)	-40C to +85C (I)	-40C to +85C (I)	-40C to +105C (V)	-40C to +105C (V)	-40C to +85C (I)	-40C to +105C (V)
Core	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K	MIPS32 M4K

Bảo phân biệt quan trọng

Wider temperature range than I-grade variants (vsPIC32MX564F064L-I/BG)
Better peripheral density than larger-Flash siblings (vsPIC32MX460F512L-80V/BG)
Modernized USB-OTG over legacy MX3xx (vsPIC32MX360F512L-80V/BG)
Smaller Flash footprint option for cost-sensitive designs (vsPIC32MX564F128L-I/BG)

Ghi chú thiết kế

The 121-TFBGA package at 10x10 mm with 0.8 mm ball pitch requires PCB microvia (laser-drilled, stacked) technology for inner-row ball escape routing. According to Microchip packaging specification 00000052D, design rules require minimum 0.15 mm via pad and 0.1 mm drill. Place a continuous ground plane on layer 2 beneath the BGA to reduce reference plane impedance discontinuities and improve signal integrity for high-speed USB signals.

PIC32MX564F064LT-V/BG operates from 2.3V to 3.6V with internal voltage regulator requiring 10uF bulk decoupling on VDDCORE plus 0.1uF ceramic on each VDD pin. Per Microchip datasheet DS60001156G, place decoupling capacitors within 5 mm of each supply pin. The internal LDO dissipates VIN-VOUT multiplied by quiescent current; at 80 MHz with all peripherals active, expect ~30 mA core current and ~15 mA I/O current.

Do not exceed 3.6V on any digital I/O pin, even temporarily, as the PIC32MX5xx family has no 5V tolerance on most pins. The USB D+/D- pins require series 27-ohm resistors and the VBUS pin must be connected through a voltage divider for OTG session detection. Configuration bits must be set correctly for the PLL and oscillator mode; failure to configure FNOSC, POSCMD, and PLLIDIV properly results in the device remaining in reset.

USB-OTG Full-Speed (12 Mbit/s) requires 90-ohm differential impedance on D+/D- traces with matched length within 150 mil. CAN signals (CANTX/CANRX) need 120-ohm termination at the bus ends and short stubs to the transceiver. Keep analog ADC traces away from switching signals; use a ground guard ring around sensitive analog inputs to reduce digital switching noise coupling.

Thông tin tuân thủ

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Không chì

Yes

Không halogen

Yes

Khoáng vật xung đột

Compliant

RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - this part targets industrial, not automotive. V temperature grade (-40C to +105C) suits industrial automation and outdoor enclosures.

Dữ liệu được xác minh vào: 2026-10-03 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Nguồn: Distributor, Distributor, Distributor, Distributor, Distributor, Manufacturer Product Page, Manufacturer Datasheet, Octopart

Tìm kiếm liên quan

PIC32MX564F064LT-V/BG PIC32MX564F064LT-V/BG datasheet Microchip PIC32MX564 microcontroller 32-bit MCU 80MHz 64KB Flash USB OTG CAN 121-TFBGA microcontroller PIC32MX564 USB CAN gateway PIC32MX564F064LT vs PIC32MX564F128L PIC32MX564 drop-in replacement PIC32MX564F064LT-V/BG buy online PIC32MX564F064LT-V/BG lead time PIC32MX564F064LT-V/BG pinout TFBGA MIPS32 M4K 80MHz MCU 64KB

Các bộ phận và thuật ngữ liên quan

Microchip Technology PIC32MX564F064LT-V/BG PIC32MX564F064L-I/BG PIC32MX564F128L-I/BG PIC32MX460F512L-80V/BG PIC32MX360F512L-80V/BG PIC32MX340F128L-80I/BG PIC32MX440F128L-80V/BG MIPS32 M4K PIC microcontroller TFBGA 121-TFBGA USB-OTG CAN 2.0B DMA 10-bit ADC RoHS REACH Microchip PIC32MX family BGA surface mount package MPLAB Harmony