S912XES384J3VAL - 16-Bit HCS12X MCU 384KB Flash 112-LQFP | NXP
MPN: S912XES384J3VAL ✓ Hoạt độngS912XES384J3VAL Tóm tắt
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers (SCI/SPI/I2C/CAN), and general-purpose I/O. Within the broader semiconductor taxonomy, MCUs sit inside the embedded-IC family, between microprocessors (MPU) and application-specific standard products (ASSP). HCS12X is NXP's enhanced 16-bit MCU architecture, an evolution of the original HC12 line that adds an XGATE co-processor for offloading interrupt-driven I/O from the main CPU, dramatically improving real-time performance for automotive body, chassis, and industrial control applications. Programmable Flash sizes in this family range from 128KB to 1MB, putting the '384J3' variant in the mid-density range suitable for protocol stacks, motor-control firmware, and gateway nodes.
Key features per verified distributor data include the 16-bit HCS12X CPU at 50 MHz, 384KB (384K x 8) of program Flash, 112-LQFP (20x20 mm) gull-wing package, industrial temperature grade, and a member of the S912X sub-family which is the standard (non-LCD) variant of the S12XE/S12XS series. The XGATE peripheral co-processor provides DMA-style I/O handling at up to 100 MHz, freeing the main S12X core for application logic. On-chip peripherals commonly paired with this mask set include CAN 2.0 controllers, SCI/UART, SPI, I2C, an 8/10/12-bit ADC, PWM modules, and general-purpose timers suitable for BLDC and stepper motor drive.
Typical applications include automotive body-electronics modules (BCM), industrial CAN gateways, HVAC controllers, and sensor-interface nodes where deterministic real-time response to interrupts is mandatory. The S912XE384J3VAL is also well suited to small-format motor-control PCBs because the 112-LQFP package gives 80+ general-purpose I/O lines for parallel keypad scanning, LED drivers, and segmented-display control without an external bus expander.
When designing with this part, confirm the supply voltage (5V typical for HCS12X), regulator sequencing, and the BDM (Background Debug Mode) interface for in-circuit programming. The XGATE co-processor firmware must be developed with Freescale/NXP CodeWarrior or the modern S32DS toolchain to access the full peripheral bandwidth. RoHS-compliant and lead-free versions are standard; for automotive AEC-Q100 qualification, choose a sibling 'J3V' or 'MAA' suffix variant.
Bộ thay thế dễ dàng lắp đặt cho S912XES384J3VAL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với S912XES384J3VAL (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature Range, Operating Temperature, Product Type, Terminal Count.
S912XEQ384J3CALR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XEQ512J2MAA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XET512J3MAG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XEG384J3CAGR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XEG384J2CALR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XEP768J4CAL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XEQ512J2MAL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XEQ512J2MALR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →S912XES384J3VAL Tỷ lệ tối đa & tính chất điện
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | HCS12X (S12XE family) |
| Core Architecture | 16-bit HCS12X CPU with XGATE co-processor |
| Core Frequency | 50 MHz |
| Program Memory | 384 KB Flash (384K x 8) |
| Hộp | 112-LQFP (20 x 20 mm) |
| Terminal Form | GULL WING |
| No. of Terminals | 112 |
| Package Code | QFP |
| Package Shape | SQUARE |
| Temperature Grade | INDUSTRIAL |
| Kiểu lắp đặt | Surface Mount |
| On-chip Peripherals | CAN, SCI, SPI, I2C, PWM, ADC, Timers (typical for S12XE) |
| XGATE Co-processor | Yes (typical for S12XE) |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
Cấu hình chân S912XES384J3VAL
| Chân 1 | PE0 — Port E I/O bit 0 / XGATE interrupt source |
| Chân 2 | PE1 — Port E I/O bit 1 |
| Chân 3 | PE2 — Port E I/O bit 2 |
| Chân 4 | PE3 — Port E I/O bit 3 |
| Chân 5 | PE4 — Port E I/O bit 4 |
| Chân 6 | PE5 — Port E I/O bit 5 |
| Chân 7 | PE6 — Port E I/O bit 6 |
| Chân 8 | PE7 — Port E I/O bit 7 |
| Chân 9 | VDDR — Voltage regulator supply input |
| Chân 10 | VDD — Digital supply voltage |
| Chân 11 | VSS — Ground reference |
| Chân 12 | VSSX1 — I/O ground (Port A) |
| Chân 13 | PA0 — Port A I/O bit 0 / address/data bus |
| Chân 14 | PA1 — Port A I/O bit 1 / address/data bus |
| Chân 15 | PA2 — Port A I/O bit 2 / address/data bus |
| Chân 16 | PA3 — Port A I/O bit 3 / address/data bus |
| Chân 17 | PA4 — Port A I/O bit 4 / address/data bus |
| Chân 18 | PA5 — Port A I/O bit 5 / address/data bus |
| Chân 19 | PA6 — Port A I/O bit 6 / address/data bus |
| Chân 20 | PA7 — Port A I/O bit 7 / address/data bus |
| Chân 21 | VDDA — Analog supply voltage |
| Chân 22 | VSSA — Analog ground |
| Chân 23 | PAD00 — Analog input / Port AD bit 0 |
| Chân 24 | PAD01 — Analog input / Port AD bit 1 |
| Chân 25 | PAD02 — Analog input / Port AD bit 2 |
| Chân 26 | PAD03 — Analog input / Port AD bit 3 |
| Chân 27 | PAD04 — Analog input / Port AD bit 4 |
| Chân 28 | PAD05 — Analog input / Port AD bit 5 |
| Chân 29 | PAD06 — Analog input / Port AD bit 6 |
| Chân 30 | PAD07 — Analog input / Port AD bit 7 |
| Chân 31 | PAD08 — Analog input / Port AD bit 8 |
| Chân 32 | PAD09 — Analog input / Port AD bit 9 |
| Chân 33 | PAD10 — Analog input / Port AD bit 10 |
| Chân 34 | PAD11 — Analog input / Port AD bit 11 |
| Chân 35 | PAD12 — Analog input / Port AD bit 12 |
| Chân 36 | PAD13 — Analog input / Port AD bit 13 |
| Chân 37 | PAD14 — Analog input / Port AD bit 14 |
| Chân 38 | PAD15 — Analog input / Port AD bit 15 |
| Chân 39 | VDD — Digital supply voltage |
| Chân 40 | VSS — Ground reference |
| Chân 41 | PB0 — Port B I/O bit 0 / address bus |
| Chân 42 | PB1 — Port B I/O bit 1 / address bus |
| Chân 43 | PB2 — Port B I/O bit 2 / address bus |
| Chân 44 | PB3 — Port B I/O bit 3 / address bus |
| Chân 45 | PB4 — Port B I/O bit 4 / address bus |
| Chân 46 | PB5 — Port B I/O bit 5 / address bus |
| Chân 47 | PB6 — Port B I/O bit 6 / address bus |
| Chân 48 | PB7 — Port B I/O bit 7 / address bus |
| Chân 49 | PC0 — Port C I/O bit 0 / data bus |
| Chân 50 | PC1 — Port C I/O bit 1 / data bus |
| Chân 51 | PC2 — Port C I/O bit 2 / data bus |
| Chân 52 | PC3 — Port C I/O bit 3 / data bus |
| Chân 53 | PC4 — Port C I/O bit 4 / data bus |
| Chân 54 | PC5 — Port C I/O bit 5 / data bus |
| Chân 55 | PC6 — Port C I/O bit 6 / data bus |
| Chân 56 | PC7 — Port C I/O bit 7 / data bus |
| Chân 57 | VSSX2 — I/O ground (Port B/C) |
| Chân 58 | VDDX2 — I/O supply (Port B/C) |
| Chân 59 | PP0 — Port P I/O bit 0 / PWM |
| Chân 60 | PP1 — Port P I/O bit 1 / PWM |
| Chân 61 | PP2 — Port P I/O bit 2 / PWM |
| Chân 62 | PP3 — Port P I/O bit 3 / PWM |
| Chân 63 | PP4 — Port P I/O bit 4 / PWM |
| Chân 64 | PP5 — Port P I/O bit 5 / PWM |
| Chân 65 | PP6 — Port P I/O bit 6 / PWM |
| Chân 66 | PP7 — Port P I/O bit 7 / PWM |
| Chân 67 | PJ0 — Port J I/O bit 0 / CAN0 TX |
| Chân 68 | PJ1 — Port J I/O bit 1 / CAN0 RX |
| Chân 69 | PJ2 — Port J I/O bit 2 / CAN1 TX |
| Chân 70 | PJ3 — Port J I/O bit 3 / CAN1 RX |
| Chân 71 | PJ4 — Port J I/O bit 4 / CAN2 TX |
| Chân 72 | PJ5 — Port J I/O bit 5 / CAN2 RX |
| Chân 73 | PJ6 — Port J I/O bit 6 / CAN3 TX |
| Chân 74 | PJ7 — Port J I/O bit 7 / CAN3 RX |
| Chân 75 | PS0 — Port S I/O bit 0 / SPI0 |
| Chân 76 | PS1 — Port S I/O bit 1 / SPI0 |
| Chân 77 | PS2 — Port S I/O bit 2 / SPI0 |
| Chân 78 | PS3 — Port S I/O bit 3 / SPI0 |
| Chân 79 | PS4 — Port S I/O bit 4 / SCI0 TX |
| Chân 80 | PS5 — Port S I/O bit 5 / SCI0 RX |
| Chân 81 | PS6 — Port S I/O bit 6 / SCI1 TX |
| Chân 82 | PS7 — Port S I/O bit 7 / SCI1 RX |
| Chân 83 | PT0 — Port T I/O bit 0 / Timer |
| Chân 84 | PT1 — Port T I/O bit 1 / Timer |
| Chân 85 | PT2 — Port T I/O bit 2 / Timer |
| Chân 86 | PT3 — Port T I/O bit 3 / Timer |
| Chân 87 | PT4 — Port T I/O bit 4 / Timer |
| Chân 88 | PT5 — Port T I/O bit 5 / Timer |
| Chân 89 | PT6 — Port T I/O bit 6 / Timer |
| Chân 90 | PT7 — Port T I/O bit 7 / Timer |
| Chân 91 | RESET — External reset input (active low) |
| Chân 92 | TEST — Test mode entry (tie to VSS in normal operation) |
| Chân 93 | VDDR — Voltage regulator supply |
| Chân 94 | VSS — Ground reference |
| Chân 95 | EXTAL — External oscillator input |
| Chân 96 | XTAL — External oscillator output |
| Chân 97 | VDDX3 — I/O supply (Port S/T) |
| Chân 98 | VSSX3 — I/O ground (Port S/T) |
| Chân 99 | BKGD — Background Debug Mode (BDM) input/output |
| Chân 100 | PD0 — Port D I/O bit 0 / SPI1 |
| Chân 101 | PD1 — Port D I/O bit 1 / SPI1 |
| Chân 102 | PD2 — Port D I/O bit 2 / SPI1 |
| Chân 103 | PD3 — Port D I/O bit 3 / SPI1 |
| Chân 104 | PD4 — Port D I/O bit 4 / SCI2 |
| Chân 105 | PD5 — Port D I/O bit 5 / SCI2 |
| Chân 106 | PD6 — Port D I/O bit 6 / I2C |
| Chân 107 | PD7 — Port D I/O bit 7 / I2C |
| Chân 108 | VSSX4 — I/O ground (Port D/P) |
| Chân 109 | VDDX4 — I/O supply (Port D/P) |
| Chân 110 | PM0 — Port M I/O bit 0 / CAN4 TX |
| Chân 111 | PM1 — Port M I/O bit 1 / CAN4 RX |
| Chân 112 | VPP — Flash programming voltage (leave open or tied to VDD in normal operation) |
Ứng dụng tiêu biểu
S912XES384J3VAL phù hợp cho 6 Áp dụngs: Automotive Body Electronics Modules (BCM), Industrial CAN Gateways and Protocol Bridges, HVAC and Climate-Control Controllers, BLDC and Stepper Motor Drive Boards, Sensor Interface and Data Acquisition Nodes, Battery Management System (BMS) Slave Modules.
Automotive Body Electronics Modules (BCM)
The S912XES384J3VAL's 384 KB of on-chip Flash and 50 MHz HCS12X core with XGATE co-processor make it ideal for body control modules that aggregate window, mirror, lighting, and door-lock functions via LIN and CAN. Its 112-LQFP-20x20 footprint exposes roughly 80 GPIO pins, enough to drive multiple relay and MOSFET half-bridges directly. Placed at the center of a BCM PCB with NXP TJA1055 LIN and TJA1040 CAN transceivers, it provides deterministic interrupt handling under the XGATE, freeing the main CPU for application logic and J1939 diagnostics.
Được đề xuất
Industrial CAN Gateways and Protocol Bridges
The S912XES384J3VAL's multiple on-chip CAN 2.0 controllers and 384 KB of Flash accommodate full CANopen, DeviceNet, or J1939 protocol stacks with room left for gateway routing logic and diagnostics buffers. Its 50 MHz core, combined with the XGATE peripheral co-processor, allows the part to bridge CAN-to-CAN, CAN-to-UART, or CAN-to-Ethernet traffic at line rate. Deployed between field-bus segments, the MCU runs the application protocol and offloads message filtering to XGATE, achieving deterministic sub-millisecond latency.
Được đề xuất
HVAC and Climate-Control Controllers
The S912XES384J3VAL's industrial temperature grade, 384 KB Flash, and rich ADC/PWM peripheral set make it well-suited to commercial and industrial HVAC controllers that drive BLDC fans, stepper damper motors, and NTC temperature sensors. The 112-LQFP-20x20 footprint provides generous GPIO for segmented LCD bias generation, keypad scanning, and relay outputs. On the PCB, the MCU sits between the mains-isolated 5V regulator and the actuator driver stage, executing PID control loops in real time with XGATE offloading PWM updates.
Được đề xuất
BLDC and Stepper Motor Drive Boards
The S912XES384J3VAL's 50 MHz HCS12X core plus XGATE provides enough compute headroom for sensorless BLDC commutation using back-EMF zero-crossing or FOC algorithms at modest PWM frequencies. With 384 KB of Flash, it accommodates full motor-control libraries, protection state machines, and tuning parameter storage in EEPROM. On the drive board, the MCU generates complementary PWM outputs to gate drivers, samples phase currents through its on-chip ADC, and implements overcurrent/overtemperature shutdown within microseconds.
Được đề xuất
Sensor Interface and Data Acquisition Nodes
The S912XES384J3VAL's 384 KB Flash and on-chip multi-channel ADC make it a natural fit for distributed sensor-interface nodes in industrial IoT and process-control networks. The 112-LQFP-20x20 footprint supports simultaneous connection to multiple SPI or I2C sensors plus analog front-ends, while the HCS12X core executes calibration, linearization, and CAN-based upload at 50 MHz. Used as a remote terminal unit in a SCADA network, it provides deterministic sampling and protocol framing without external memory.
Được đề xuất
Battery Management System (BMS) Slave Modules
The S912XES384J3VAL's CAN interface, 384 KB Flash, and industrial temperature grade make it suitable as a slave-cell monitor in a distributed BMS architecture, communicating cell voltages, temperatures, and balancing state to a master ECU over CAN. The 112-LQFP-20x20 footprint allows direct connection to multiple cell-voltage ADCs and isolators. On the PCB, the MCU coordinates cell-balancing MOSFETs, samples thermistors, and publishes telemetry frames at 100 ms intervals with predictable latency from the XGATE peripheral handler.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho S912XES384J3VAL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | S912XEQ384J3CALR | S912XEQ512J2MAA | S912XET512J3MAG | S912XEG384J3CAGR | S912XEP768J4CAL |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same |
| Core Architecture | 16-bit HCS12X with XGATE | 16-bit HCS12X with XGATE | 16-bit HCS12X with XGATE | 16-bit HCS12X with XGATE | 16-bit HCS12X with XGATE | 16-bit HCS12X with XGATE |
| Core Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Program Flash | 384 KB | 384 KB | 512 KB (+33%) | 512 KB (+33%) | 384 KB | 768 KB (+100%) |
| Temperature Grade | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL | INDUSTRIAL |
| Mounting Type | Surface Mount (LQFP) | Surface Mount (LQFP) | Surface Mount (LQFP) | Surface Mount (LQFP) | Surface Mount (LQFP) | Surface Mount (LQFP) |
| Terminal Form | GULL WING | GULL WING | GULL WING | GULL WING | GULL WING | GULL WING |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Bảo phân biệt quan trọng
- Identical 384KB Flash density in same 112-LQFP footprint with immediate NXP franchise stock (vsS912XEQ384J3CALR)
- 32 percent extra Flash headroom without PCB change (vsS912XEQ512J2MAA)
- Larger 768 KB Flash option for protocol-rich firmware (vsS912XEP768J4CAL)
Ghi chú thiết kế
The S912XES384J3VAL requires a stable 5V supply on VDD/VSS for the digital core, with VDDR feeding the on-chip voltage regulator. Place a 100 nF decoupling capacitor on every VDD/VSS pin pair within 5 mm of the package pad, plus bulk 4.7 uF to 10 uF tantalum or ceramic caps on the VDDR pin. Sequence the regulator so VDDR stabilizes before VDD, or follow NXP's recommended reset-circuit reference design in the S12XE family reference manual.
The 112-LQFP-20x20 footprint demands a 4-layer PCB with a continuous ground plane under the part. Route the high-speed CAN, SCI, and SPI signals on the top layer above an unbroken ground pour; place the EXTAL/XTAL oscillator traces within a grounded keep-out region no longer than 5 mm and use a guard ring around the crystal. Keep the BDM (BKGD) trace short and protected from adjacent switching signals to avoid debug-session interference.
Do not float the TEST pin - tie it to VSS through a 1 kohm resistor for normal operation, otherwise the device enters special test mode on power-up. Always configure the XGATE co-processor firmware in your startup code; leaving XGATE uninitialized while depending on peripheral interrupts serviced by it can hang the application. Finally, validate the mask-revision errata document from NXP (S12XE J3 mask set) against any peripheral you depend on before committing to production.
Thông tin tuân thủ
RoHS compliant per JLCPCB and standard NXP product environmental data. INDUSTRIAL temperature grade only; AEC-Q100 not explicitly claimed for this suffix - choose AEC-Q100 sibling variants for automotive applications. Lead-free per JLCPCB RoHS flag.
