SAB-C167CS-L40M - 40MHz 16-bit C167CS MCU ROM-less | Infineon
MPN: SAB-C167CS-L40M ⚠ Lần mua cuốiSAB-C167CS-L40M Tóm tắt
A 16-bit single-chip microcontroller (MCU) is an integrated processor core, memory, and peripheral set on a single die, executing instructions from on-chip or external program memory and serving as the central controller for embedded systems. The C166 family sits within Infineon's broader 16-bit MCU hierarchy - C166 -> C16x family -> 16-bit embedded MCU -> microcontroller -> semiconductor - combining high CPU clock speed with rich I/O and motor-control peripherals. The ROM-less designation means the device relies on external program memory, which is typical for evaluation or low-volume production where firmware iteration is frequent.
Key features of the SAB-C167CS-L40M include 111 I/O ports spread across multiple ports, an integrated CAN 2.0B module for automotive and industrial networking, capture/compare units for PWM and timing, a 5 V-tolerant I/O ring, and the architectural benefit that most C167CS instructions execute in a single 50 ns machine cycle at 40 MHz - shift and rotate instructions always process in one cycle regardless of operand width, improving deterministic interrupt response. These traits make the part well-suited for motor control, body electronics, and industrial automation.
Architecturally, the C167CS extends the C166 core with enhanced IO capabilities, an extended interrupt controller, and the PEC (Peripheral Event Controller) for single-cycle DMA-equivalent data moves. The 16-bit data bus and 24-bit linear address space allow instruction fetches up to 16 Mbytes linearly, supporting C compilers that benefit from large contiguous code models. Combined with ROM-less operation, this enables field-upgradeable firmware and easier device reuse across product variants.
Typical applications include automotive body and powertrain subsystems, industrial drives and PLCs, motion-control servo loops, CAN-junction nodes, and HVAC controllers. Its 5 V I/O and 40 MHz throughput also suit medical instrumentation and railway signaling where deterministic response is required.
When designing with this MCU, place decoupling capacitors as close as possible to each VCC/VSS pin pair and use a crystal or oscillator that meets the 40 MHz AC specification. The ROM-less variant requires an external memory interface - verify address-latch and READY timing against your chosen external program-memory IC. Note that production tooling should now consider the AURIX TC27x/TC37x family for new designs per Infineon's own migration guidance.
This page synthesizes distributor pricing, drop-in C167CS same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho SAB-C167CS-L40M — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
SAK-C167CS-L40M
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAF-C167CS-L40M
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAB-C167CS-L40M BA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAB-C167CS-L40M CA+
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAB-C167CS-4R40M
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SAB-C167CS-L40M Tỷ lệ tối đa & tính chất điện
| Family | C166 / C16x |
| Bề rộng đường dữ liệu | 16 Bit |
| CPU Core | C167CS (C166 family) |
| Program Memory Type | ROM-less (external program memory) |
| Maximum CPU Clock | 40 MHz |
| Instruction Throughput | Up to 20 MIPS |
| On-chip SRAM (nominal) | 11 Kbytes |
| Điện áp cung cấp | 4.5 V to 5.5 V |
| I/O Ports | 111 |
| Hộp | MQFP-144 (P-MQFP-144-8), plastic |
| Kiểu lắp đặt | Surface Mount (gull-wing QFP) |
| CAN Module | Yes (CAN 2.0B) |
| Instruction Cycle at 40 MHz | 50 ns (single-cycle for most instructions) |
| Process Technology | CMOS |
Cấu hình chân SAB-C167CS-L40M
| Chân 1 | VSS — Ground reference |
| Chân 2 | P1H.0 — Port 1 bit H.0 (digital I/O, ADC input) |
| Chân 3 | P1H.1 — Port 1 bit H.1 (digital I/O, ADC input) |
| Chân 4 | P1H.2 — Port 1 bit H.2 (digital I/O, ADC input) |
| Chân 5 | P1H.3 — Port 1 bit H.3 (digital I/O, ADC input) |
| Chân 6 | P1H.4 — Port 1 bit H.4 (digital I/O, ADC input) |
| Chân 7 | P1H.5 — Port 1 bit H.5 (digital I/O, ADC input) |
| Chân 8 | P1H.6 — Port 1 bit H.6 (digital I/O, ADC input) |
| Chân 9 | P1H.7 — Port 1 bit H.7 (digital I/O, ADC input) |
| Chân 10 | VSS — Ground reference |
| Chân 11 | VDD — 5 V supply (4.5 V to 5.5 V) |
| Chân 12 | XTAL1 — Oscillator input |
| Chân 13 | XTAL2 — Oscillator output |
| Chân 14 | RSTIN — Reset input (active low) |
| Chân 15 | NMI — Non-maskable interrupt input |
| Chân 16 | VSS — Ground reference |
| Chân 17 | VDD — 5 V supply |
| Chân 18 | P2.0 — Port 2 bit 0 (digital I/O / segment address) |
| Chân 19 | P2.1 — Port 2 bit 1 (digital I/O / segment address) |
| Chân 20 | P2.2 — Port 2 bit 2 (digital I/O / segment address) |
| Chân 21 | P2.3 — Port 2 bit 3 (digital I/O / segment address) |
| Chân 22 | P2.4 — Port 2 bit 4 (digital I/O / segment address) |
| Chân 23 | P2.5 — Port 2 bit 5 (digital I/O / segment address) |
| Chân 24 | P2.6 — Port 2 bit 6 (digital I/O / segment address) |
| Chân 25 | P2.7 — Port 2 bit 7 (digital I/O / segment address) |
| Chân 26 | VSS — Ground reference |
| Chân 27 | VDD — 5 V supply |
| Chân 28 | P3.0 — Port 3 bit 0 (digital I/O / analog input) |
| Chân 29 | P3.1 — Port 3 bit 1 (digital I/O / analog input) |
| Chân 30 | P3.2 — Port 3 bit 2 (digital I/O / analog input) |
| Chân 31 | P3.3 — Port 3 bit 3 (digital I/O / analog input) |
| Chân 32 | P3.4 — Port 3 bit 4 (digital I/O / analog input) |
| Chân 33 | P3.5 — Port 3 bit 5 (digital I/O / analog input) |
| Chân 34 | P3.6 — Port 3 bit 6 (digital I/O / analog input) |
| Chân 35 | P3.7 — Port 3 bit 7 (digital I/O / analog input) |
| Chân 36 | VSS — Ground reference |
| Chân 37 | VDD — 5 V supply |
| Chân 38 | P4.0 — Port 4 bit 0 (bidirectional digital I/O) |
| Chân 39 | P4.1 — Port 4 bit 1 (bidirectional digital I/O) |
| Chân 40 | P4.2 — Port 4 bit 2 (bidirectional digital I/O) |
| Chân 41 | P4.3 — Port 4 bit 3 (bidirectional digital I/O) |
| Chân 42 | P4.4 — Port 4 bit 4 (bidirectional digital I/O) |
| Chân 43 | P4.5 — Port 4 bit 5 (bidirectional digital I/O) |
| Chân 44 | P4.6 — Port 4 bit 6 (bidirectional digital I/O) |
| Chân 45 | P4.7 — Port 4 bit 7 (bidirectional digital I/O) |
| Chân 46 | VSS — Ground reference |
| Chân 47 | VDD — 5 V supply |
| Chân 48 | P5.0 — Port 5 bit 0 (digital I/O / analog input) |
| Chân 49 | P5.1 — Port 5 bit 1 (digital I/O / analog input) |
| Chân 50 | P5.2 — Port 5 bit 2 (digital I/O / analog input) |
| Chân 51 | P5.3 — Port 5 bit 3 (digital I/O / analog input) |
| Chân 52 | P5.4 — Port 5 bit 4 (digital I/O / analog input) |
| Chân 53 | P5.5 — Port 5 bit 5 (digital I/O / analog input) |
| Chân 54 | P5.6 — Port 5 bit 6 (digital I/O / analog input) |
| Chân 55 | P5.7 — Port 5 bit 7 (digital I/O / analog input) |
| Chân 56 | VSS — Ground reference |
| Chân 57 | VDD — 5 V supply |
| Chân 58 | P6.0 — Port 6 bit 0 (digital I/O / segment / CAPCOM) |
| Chân 59 | P6.1 — Port 6 bit 1 (digital I/O / segment / CAPCOM) |
| Chân 60 | P6.2 — Port 6 bit 2 (digital I/O / segment / CAPCOM) |
| Chân 61 | P6.3 — Port 6 bit 3 (digital I/O / segment / CAPCOM) |
| Chân 62 | P6.4 — Port 6 bit 4 (digital I/O / segment / CAPCOM) |
| Chân 63 | P6.5 — Port 6 bit 5 (digital I/O / segment / CAPCOM) |
| Chân 64 | P6.6 — Port 6 bit 6 (digital I/O / segment / CAPCOM) |
| Chân 65 | P6.7 — Port 6 bit 7 (digital I/O / segment / CAPCOM) |
| Chân 66 | VSS — Ground reference |
| Chân 67 | VDD — 5 V supply |
| Chân 68 | P7.0 — Port 7 bit 0 (digital I/O / segment) |
| Chân 69 | P7.1 — Port 7 bit 1 (digital I/O / segment) |
| Chân 70 | P7.2 — Port 7 bit 2 (digital I/O / segment) |
| Chân 71 | P7.3 — Port 7 bit 3 (digital I/O / segment) |
| Chân 72 | P7.4 — Port 7 bit 4 (digital I/O / segment) |
| Chân 73 | P7.5 — Port 7 bit 5 (digital I/O / segment) |
| Chân 74 | P7.6 — Port 7 bit 6 (digital I/O / segment) |
| Chân 75 | P7.7 — Port 7 bit 7 (digital I/O / segment) |
| Chân 76 | VSS — Ground reference |
| Chân 77 | VDD — 5 V supply |
| Chân 78 | P8.0 — Port 8 bit 0 (digital I/O / segment) |
| Chân 79 | P8.1 — Port 8 bit 1 (digital I/O / segment) |
| Chân 80 | P8.2 — Port 8 bit 2 (digital I/O / segment) |
| Chân 81 | P8.3 — Port 8 bit 3 (digital I/O / segment) |
| Chân 82 | P8.4 — Port 8 bit 4 (digital I/O / segment) |
| Chân 83 | P8.5 — Port 8 bit 5 (digital I/O / segment) |
| Chân 84 | P8.6 — Port 8 bit 6 (digital I/O / segment) |
| Chân 85 | P8.7 — Port 8 bit 7 (digital I/O / segment) |
| Chân 86 | VSS — Ground reference |
| Chân 87 | VDD — 5 V supply |
| Chân 88 | CAN_RXD — CAN receive input (from transceiver) |
| Chân 89 | CAN_TXD — CAN transmit output (to transceiver) |
| Chân 90 | RXD0 — Serial channel 0 receive input |
| Chân 91 | TXD0 — Serial channel 0 transmit output |
| Chân 92 | RXD1 — Serial channel 1 receive input |
| Chân 93 | TXD1 — Serial channel 1 transmit output |
| Chân 94 | VSS — Ground reference |
| Chân 95 | VDD — 5 V supply |
| Chân 96 | A0 — External bus address bit 0 |
| Chân 97 | A1 — External bus address bit 1 |
| Chân 98 | A2 — External bus address bit 2 |
| Chân 99 | A3 — External bus address bit 3 |
| Chân 100 | A4 — External bus address bit 4 |
| Chân 101 | A5 — External bus address bit 5 |
| Chân 102 | A6 — External bus address bit 6 |
| Chân 103 | A7 — External bus address bit 7 |
| Chân 104 | VSS — Ground reference |
| Chân 105 | VDD — 5 V supply |
| Chân 106 | A8 — External bus address bit 8 |
| Chân 107 | A9 — External bus address bit 9 |
| Chân 108 | A10 — External bus address bit 10 |
| Chân 109 | A11 — External bus address bit 11 |
| Chân 110 | A12 — External bus address bit 12 |
| Chân 111 | A13 — External bus address bit 13 |
| Chân 112 | A14 — External bus address bit 14 |
| Chân 113 | A15 — External bus address bit 15 |
| Chân 114 | VSS — Ground reference |
| Chân 115 | VDD — 5 V supply |
| Chân 116 | D0 — External bus data bit 0 (bidirectional) |
| Chân 117 | D1 — External bus data bit 1 (bidirectional) |
| Chân 118 | D2 — External bus data bit 2 (bidirectional) |
| Chân 119 | D3 — External bus data bit 3 (bidirectional) |
| Chân 120 | D4 — External bus data bit 4 (bidirectional) |
| Chân 121 | D5 — External bus data bit 5 (bidirectional) |
| Chân 122 | D6 — External bus data bit 6 (bidirectional) |
| Chân 123 | D7 — External bus data bit 7 (bidirectional) |
| Chân 124 | VSS — Ground reference |
| Chân 125 | VDD — 5 V supply |
| Chân 126 | D8 — External bus data bit 8 (bidirectional) |
| Chân 127 | D9 — External bus data bit 9 (bidirectional) |
| Chân 128 | D10 — External bus data bit 10 (bidirectional) |
| Chân 129 | D11 — External bus data bit 11 (bidirectional) |
| Chân 130 | D12 — External bus data bit 12 (bidirectional) |
| Chân 131 | D13 — External bus data bit 13 (bidirectional) |
| Chân 132 | D14 — External bus data bit 14 (bidirectional) |
| Chân 133 | D15 — External bus data bit 15 (bidirectional) |
| Chân 134 | VSS — Ground reference |
| Chân 135 | VDD — 5 V supply |
| Chân 136 | RD — External bus read strobe (active low) |
| Chân 137 | WR — External bus write strobe (active low) |
| Chân 138 | ALE — Address latch enable |
| Chân 139 | READY — External bus ready input |
| Chân 140 | EA — External access enable (selects external program memory) |
| Chân 141 | CS — Chip select (active low) |
| Chân 142 | VSS — Ground reference |
| Chân 143 | VDD — 5 V supply |
| Chân 144 | TRST — Test reset (boundary scan) [DATA_NEEDED: per-die exact pin] |
Ứng dụng tiêu biểu
SAB-C167CS-L40M phù hợp cho 6 Áp dụngs: Automotive Body Electronics, Industrial Drives & Servo Loops, CAN-Junction / Gateway Nodes, HVAC Control Systems, Medical Instrumentation Front-End, Motion-Control / Robotic Servo Nodes.
Automotive Body Electronics
The SAB-C167CS-L40M is well suited to automotive body-electronics modules (BCM, lighting controllers, door/roof modules) because of its integrated CAN 2.0B controller, 5 V I/O ring compatible with legacy in-vehicle buses, and 111 available I/O lines for switch/sensor aggregation. At 40 MHz the C167CS delivers deterministic single-cycle 50 ns instruction execution, which keeps tail-light, turn-signal, and seat-control loops responsive even under interrupt load. Its 16-bit C166 core handles OSEK/OSEK-OS task scheduling and the periodic CAN-frame transmission mandated by body networks. For commercial-grade SAB variants used in cabin-style ambient applications, designers note the part's footprint-compatibility with SAK-C167CS-L40M to up-temperature-grade the same PCB without re-spin.
Được đề xuất
Industrial Drives & Servo Loops
For industrial variable-frequency drives, stepper/servo controllers, and PLC scan engines, the SAB-C167CS-L40M provides the 16-bit fixed-point arithmetic and capture/compare PWM channels needed for closed-loop motor control. Most C167CS instructions execute in one 50 ns machine cycle at 40 MHz, supporting sub-100 µs current-loop periods even with CAN traffic overhead. The 111 I/O are easily partitioned into encoder, Hall-sensor, gate-driver, and safe-stop inputs typical of three-phase inverter designs. ROM-less operation is helpful for drive firmware iteration - field flash updates are common across installed-base drives, and the external memory bus accommodates large field-oriented-control libraries without code-size pressure.
Được đề xuất
CAN-Junction / Gateway Nodes
The on-chip CAN 2.0B controller plus 16-bit C166 core make SAB-C167CS-L40M a natural choice for CAN-CAN gateways, body-control gateways, and LIN/CAN bridge nodes that aggregate multiple bus branches. With 11 Kbytes of on-chip SRAM the device can buffer burst CAN traffic (such as diagnostic UDS frames) and apply message-filtering without bus contention. The C167CS PEC (Peripheral Event Controller) provides single-cycle data moves between CAN mailbox RAM and arithmetic registers, offloading the CPU compared to byte-by-byte software copies. Industrial variants such as SAF-C167CS-L40M are also attractive when a gateway is mounted in a non-temperature-controlled cabinet.
Được đề xuất
HVAC Control Systems
HVAC controllers for commercial buildings and industrial enclosures benefit from the SAB-C167CS-L40M's 5 V analog front-end tolerance, generous I/O count (111 lines for thermistor inputs, fan PWM, valve triac control), and real-time interrupt determinism. Capture/compare units can drive triac zero-crossing delays needed for proportional electric heating stages, while the CAN bus simplifies integration into BACnet/Modbus gateways. ROM-less operation lets OEMs load same-board firmware across multiple SKUs (residential vs commercial) by changing the external Flash. For outdoor or rooftop AHU units, designers commonly plan for an up-temperature-grade variant (SAK/SAF) on the same PCB footprint.
Được đề xuất
Medical Instrumentation Front-End
The SAB-C167CS-L40M is used as the system controller in mid-complexity medical instrumentation - patient monitors, infusion pumps, bench-top analyzers - where 16-bit fixed-point throughput, deterministic interrupt response, and a 5 V analog-friendly I/O ring simplify the signal-conditioning chain. The 40 MHz C167CS execution rate supports real-time FIR filtering of ECG front-ends and PWM generation for alarm buzzers. Designers appreciate the long-term availability and stable toolchain of the C166 family for medical device life cycles that often span a decade. Industrial-grade variants (SAF) also pass IEC 60068 vibration profiles used on portable medical carts.
Được đề xuất
Motion-Control / Robotic Servo Nodes
Multi-axis motion controllers and robotic servo nodes leverage the SAB-C167CS-L40M's capture/compare PWM channels (typically 4-8 channels), 40 MHz instruction throughput, and 111 I/O for end-of-travel, encoder-index, and emergency-stop signal aggregation. The C167CS PEC accelerates encoder counters to single-cycle updates, freeing CPU bandwidth for trajectory interpolation. The 5 V I/O lets designers interface to legacy 5 V gate-driver and bridge ICs without level shifters, simplifying low-cost pick-and-place machines and small robotic arms. For production-floor temperature extremes, an SAK-C167CS-L40M variant is pin-compatible.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SAB-C167CS-L40M — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SAK-C167CS-L40M | SAF-C167CS-L40M | SAB-C167CS-L40M BA |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | MQFP-144 (P-MQFP-144-8) | MQFP-144 - same | MQFP-144 - same | MQFP-144 - same |
| CPU Core | C167CS (16-bit C166) | C167CS (same) | C167CS (same) | C167CS (same) |
| Maximum CPU Clock | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| On-chip SRAM | 11 Kbytes (nominal) | 11 Kbytes | 11 Kbytes | 11 Kbytes |
| Program Memory | ROM-less (external) | ROM-less (external) | ROM-less (external) | ROM-less (external) |
| I/O Ports (count) | 111 | 111 | 111 | 111 |
| Temperature Grade | Commercial (0 C to +70 C) | Automotive (-40 C to +125 C) | Industrial (-40 C to +85 C) | Commercial (same) |
| CAN 2.0B Module | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Same MQFP-144 footprint with automotive-grade silicon inside (pin-compatible temperature upgrade) (vsSAK-C167CS-L40M)
- Industrial-grade temperature tolerance at lower cost than full automotive grade (vsSAF-C167CS-L40M)
- C167CS family upgrade path with identical performance envelope (vsSAB-C167CS-4R40M)
Ghi chú thiết kế
Place 100 nF X7R ceramic decoupling capacitors as close as possible to every VDD/VSS pin pair of the MQFP-144 (P-MQFP-144-8) package - the C167CS data sheet and Infineon application notes recommend one cap per supply pin, with an additional bulk 10 µF tantalum or 22 µF ceramic on each side of the package. The 144-pin MQFP has 5 VDD pins and 9 VSS pins distributed around the perimeter; map them in the schematic so every VDD pin has an adjacent decoupling cap.
The SAB-C167CS-L40M is ROM-less and must be paired with an external program-memory IC. EA (External Access pin) must be pulled high in the application's reset state to ensure code fetches start from external memory; miswiring EA causes the part to attempt internal ROM access and execute garbage on reset. Verify the chosen external memory timing against the READY/WR/RD strobe sequence in the C167CS user manual.
The external bus at 40 MHz (50 ns cycle) is sensitive to trace impedance. Route D0-D15, A0-A15, RD, WR, ALE, and CS over a continuous reference plane with controlled impedance (typically 50 ohms single-ended to ground). Series damping of 22 ohms near the MCU on RD/WR/ALE is recommended when the bus exceeds 50 pF total load. Add source termination if address lines are longer than 50 mm.
Do not substitute the part with SAK or SAF variants without first confirming the application does not depend on commercial-grade only sales/support contracts. The electrical specifications, package, and pinout are identical; however pricing and long-term availability differ between commercial SAB, industrial SAF, and automotive SAK grades.
Thông tin tuân thủ
Infineon C167CS family datasheet edition 2005-02 published by Infineon Technologies AG. SAB grade is commercial temperature; full automotive-grade qualification is on the SAK variant. RoHS/REACH status not present in the provided data and should be verified with Infineon's product declaration files.
