Texas Instruments

SN74LS245N - 8-Bit 3-State Bus Transceiver | Texas Instruments

MPN: SN74LS245N ✓ Hoạt động
5.25 V maximum Vdss 20-pin PDIP Package
MOQ: 1 |

SN74LS245N Tóm tắt

The Texas Instruments SN74LS245N is an octal, non-inverting bus transceiver with 3-state outputs, designed for asynchronous two-way communication between two data buses. The device provides eight data channels in a 20-pin PDIP package and operates from a single 5 V supply. Its direction input selects transmission from bus A to bus B or from bus B to bus A, while the output-enable input places all eight outputs in a high-impedance state when required. These functions make the SN74LS245N a bus-interface component in the TTL logic family, within the broader transceiver, buffer, and digital interface IC hierarchy.

A bus transceiver is an interface IC that connects two digital logic sections while providing directional control and output isolation. The SN74LS245N is specifically suited to systems where processors, memory, peripheral devices, or I/O modules share parallel data lines. Unlike a dedicated one-way buffer, it supports bidirectional transfer by changing the direction of all eight channels together. Its 3-state outputs allow several devices to share a common bus when their output-enable signals are controlled so that only one device actively drives the line at a time.

The principal functional features are eight non-inverting data paths, two bus ports labeled A and B, a common direction control input, a common output enable, and 3-state output behavior. The verified distributor description identifies the part as a non-inverting, one-element, eight-bit-per-element transceiver with a 3-state output and a 20-pin PDIP package. According to the Texas Instruments SN74LS245 datasheet, the control-function arrangement reduces external timing requirements, which is valuable when interfacing asynchronous systems with limited control over source and destination timing.

The SN74LS245N uses tristate outputs rather than open-collector outputs. This distinction is important because a three-state output can actively drive a logic-high or logic-low level while disabled, whereas an open-collector implementation requires a passive pull-up and does not provide a driven high state. The 20-pin PDIP construction favors through-hole assembly, repair, prototyping, and legacy computer or peripheral-interface boards where a socketed or readily replaceable logic package is useful.

Typical uses include bidirectional data buffers, computer peripheral interfaces, asynchronous parallel-bus isolation, instrument and control systems, and educational digital-logic platforms. In a processor interface, the transceiver can place a peripheral bus into a high-impedance state during periods when the processor or another bus master must take control. The common direction and enable controls simplify this arrangement because eight lines change state together rather than requiring individual control signals.

When designing around the SN74LS245N, verify signal direction, output-enable polarity, bus ownership, and setup and hold timing before connecting two independently clocked domains. Disable the outputs before changing direction or transferring control between bus masters. Decoupling requirements, absolute maximum ratings, propagation delay, output-current limits, and environmental limits should be taken directly from the manufacturer datasheet. This page also organizes functional alternatives, pin-level implementation guidance, and parameter comparisons for engineering selection.

Bộ thay thế dễ dàng lắp đặt cho SN74LS245N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SN74LS245N (cùng hình factor và footprint) — khác nhau ở Data Direction, Output State, Package.

Texas Instruments
Data Direction: Bidirectional, 2-way
Output State: 3-state, high-impedance when disabled
Package: 20-pin dual in-line package
So sánh với SN74LS245N →

SN74LS245DW

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 20-pin PDIP
Same SN74LS245 function and 20-pin PDIP footprint; identified key-rating difference is 0%.

📋 Tham chiếu thay thế (không có trong danh mục)

SN74LS245N

✅ Drop-In
Texas Instruments
📦 20-pin PDIP
Octal non-inverting 3-state bus transceiver · 8 channels · 8 bits · Bidirectional A-to-B or B-to-A · 3-state · Non-inverting · 5.25 V maximum

Liên hệ để biết giá

Xem tài liệu →

SN74LS245N

✅ Drop-In
Texas Instruments
📦 20-pin PDIP
Octal non-inverting 3-state bus transceiver · 8 channels · 8 bits · Bidirectional A-to-B or B-to-A · 3-state · Non-inverting · 5.25 V maximum

Liên hệ để biết giá

Xem tài liệu →

SN74LS245N

✅ Drop-In
Texas Instruments
📦 20-pin PDIP
Octal non-inverting 3-state bus transceiver · 8 channels · 8 bits · Bidirectional A-to-B or B-to-A · 3-state · Non-inverting · 5.25 V maximum

Liên hệ để biết giá

Xem tài liệu →

SN74ACT245N

✅ Drop-In
📦 20-pin PDIP
Shares the 5.25 V maximum rating and octal transceiver function, but uses ACT-family logic levels; the 5.25 V supply difference is 0 V.

📋 Tham chiếu thay thế (không có trong danh mục)

SN74LS245N Tỷ lệ tối đa & tính chất điện

Chức năng Octal non-inverting 3-state bus transceiver
Number of Data Channels 8 channels
Bus Width 8 bits
Data Direction Bidirectional A-to-B or B-to-A
Output State 3-state
Logic Polarity Non-inverting
Điện áp cung cấp 5.25 V maximum
Hộp 20-pin PDIP
Kiểu lắp đặt Through-hole

Cấu hình chân SN74LS245N

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
Chân 1 1A — A-side data input or output for channel 1
Chân 2 2A — A-side data input or output for channel 2
Chân 3 3A — A-side data input or output for channel 3
Chân 4 4A — A-side data input or output for channel 4
Chân 5 GND — Ground reference
Chân 6 DIR — Direction-control input
Chân 7 OE — Output-enable input with active-low control
Chân 8 8B — B-side data input or output for channel 8
Chân 9 7B — B-side data input or output for channel 7
Chân 10 6B — B-side data input or output for channel 6
Chân 11 5B — B-side data input or output for channel 5
Chân 12 4B — B-side data input or output for channel 4
Chân 13 3B — B-side data input or output for channel 3
Chân 14 2B — B-side data input or output for channel 2
Chân 15 1B — B-side data input or output for channel 1
Chân 16 VCC — Positive supply voltage
Chân 17 8A — A-side data input or output for channel 8
Chân 18 7A — A-side data input or output for channel 7
Chân 19 6A — A-side data input or output for channel 6
Chân 20 5A — A-side data input or output for channel 5

Ứng dụng tiêu biểu

SN74LS245N phù hợp cho 6 Áp dụngs: Bidirectional Processor Bus Interface, Peripheral Bus Isolation, Industrial Control Data Backplane, Educational Digital Logic Systems, Instrument and Test-System Interface, Legacy Computer Expansion Bus.

🖥️

Bidirectional Processor Bus Interface

The SN74LS245N fits a legacy 8-bit processor bus when the peripheral side must exchange data with the system bus without driving the bus continuously. Place the transceiver between the two parallel buses, use DIR to establish the active direction, and assert or deassert OE to match bus ownership. Its eight common channels reduce control complexity compared with eight individual buffers. The principal engineering consideration is avoiding contention: disable the outputs before changing direction or allowing another master to take control. Because this is an asynchronous TTL bus device, timing margins must also accommodate propagation delay and the timing of the connected logic.

🔧

Peripheral Bus Isolation

The SN74LS245N provides a controlled isolation point between a peripheral bus and a host bus in legacy computer and embedded-control equipment. Its 3-state outputs allow the peripheral side to be disconnected electrically when the host bus is active, while DIR determines which side can drive during a transfer. This arrangement reduces the number of discrete buffers required for an eight-line interface and gives the system a common mechanism for granting bus access. The designer should define ownership logic so OE is deasserted whenever two transceivers could otherwise drive the same node, and should account for enable and direction timing at the system level.

🏭

Industrial Control Data Backplane

The SN74LS245N can connect two sections of a parallel industrial control backplane when the system uses 5 V TTL signaling and requires the ability to release the bus. The eight A-side and eight B-side connections permit a controller module and an I/O module to exchange command or status data over a common physical bus. DIR provides a simple direction change, while OE isolates the transceiver when another controller is active. The implementation must include deliberate dead time between OE deassertion, DIR changes, and the next enable because those transitions determine when the outputs may safely begin driving.

📚

Educational Digital Logic Systems

The SN74LS245N is useful in educational systems that demonstrate bidirectional buses, contention, tri-state outputs, and bus arbitration. Its 20-pin PDIP package is straightforward to install on a solderless board or through-hole trainer, while the DIR and OE inputs make operating states easy to observe with LEDs and logic instruments. A lab exercise can show that the direction control selects A-to-B or B-to-A transfer and that the common output enable places all eight channels in a high-impedance state. This makes the device especially effective for demonstrating why only one driver may control a shared bus at a time.

📡

Instrument and Test-System Interface

The SN74LS245N can bridge a legacy 5 V instrument bus and a secondary parallel data section when both sides require a controlled, high-impedance inactive state. Its common DIR input simplifies command-versus-response sequencing, while OE lets the instrument bus relinquish control between transactions. This is useful in systems where a controller, fixture, or measurement module shares an 8-bit line. Designers should verify receiver and driver timing margins at the actual bus capacitance and loading, because the transceiver's electrical limits and propagation timing determine how much margin remains in a multi-device backplane.

🖥️

Legacy Computer Expansion Bus

The SN74LS245N is suited to a legacy computer expansion interface where an adapter board needs bidirectional eight-bit communication with a central bus. The transceiver provides a controlled path between the adapter data pins and the bus connector while allowing the adapter to remain electrically passive during another device's transaction. Its through-hole PDIP package also supports repairable, socketed assemblies commonly encountered in vintage computer hardware. Before installation, compare the socket pinout and signal direction carefully because legacy computers may use inversion, latching, or registered buffers that cannot be replaced directly by this transceiver.

Tóm tắt các sản phẩm được đề xuất

SN74LS373N Eight-bit latch for a separate one-way buffered bus path Được sử dụng trong: Bidirectional Processor Bus Interface, Peripheral Bus Isolation, Educational Digital Logic Systems, Instrument and Test-System Interface, Legacy Computer Expansion Bus SN74LS75N Legacy octal bus-interface logic used for comparison Được sử dụng trong: Bidirectional Processor Bus Interface, Industrial Control Data Backplane, Legacy Computer Expansion Bus SN74LS245DW Same-family 20-pin PDIP transceiver alternative Được sử dụng trong: Bidirectional Processor Bus Interface, Peripheral Bus Isolation, Industrial Control Data Backplane, Educational Digital Logic Systems, Instrument and Test-System Interface, Legacy Computer Expansion Bus
What is the SN74LS245N?
The SN74LS245N is an octal, non-inverting 3-state bus transceiver for asynchronous two-way communication between two parallel data buses. According to the Texas Instruments SN74LS245 datasheet, its direction input selects data flow from bus A to bus B or from bus B to bus A, while the output-enable input controls the high-impedance state of all eight outputs. The device is packaged in a 20-pin PDIP.
How many pins does the SN74LS245N have?
The SN74LS245N has 20 pins in a PDIP package. According to the Texas Instruments product listing, it is an eight-bit transceiver with eight A-side data pins, eight B-side data pins, one direction input, one output-enable input, one supply pin, and one ground pin. Use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB tracks.
Where can I download the SN74LS245N datasheet PDF?
The official SN74LS245N datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn74ls245.pdf. The document describes the SNx4LS245 octal bus transceivers, their direction and enable controls, electrical characteristics, and package information. Use the manufacturer copy for design sign-off because the document number, revision, and page count are not stated here.
Where can I find the SN74LS245N pinout?
The SN74LS245N pinout is shown in the Texas Instruments SN74LS245 datasheet, whose official PDF is linked on this page. The 20-pin PDIP uses pins 1 through 4 for A1 through A4, pin 5 for ground, pin 6 for DIR, pin 7 for output enable, pins 8 through 15 for B8 through B1, pin 16 for VCC, and pins 17 through 20 for A8 through A5.
What is the difference between DIR and OE on the SN74LS245N?
DIR selects the direction of all eight channels, while OE enables or disables the outputs. According to the Texas Instruments SN74LS245 datasheet, DIR controls transmission between bus A and bus B, and the output-enable input provides the common high-impedance state. Changing direction while the outputs are enabled can create bus contention, so outputs should be disabled before control signals change.
What are the key specifications of SN74LS245N that engineers should know?
The SN74LS245N provides eight bidirectional, non-inverting data channels, a common DIR control, a common output enable, and 3-state outputs in a 20-pin PDIP. According to the Texas Instruments SN74LS245 datasheet, it is intended for asynchronous two-way bus communication and uses a control arrangement that reduces external timing requirements. Its maximum supply voltage is 5.25 V.
Where can I buy SN74LS245N online and what is its price?
Use the Request a Quote form on this page to request SN74LS245N availability, current pricing, minimum order quantity, and lead time. The form provides a direct purchasing route without embedding changing commercial terms in technical content. Engineers should also confirm that the quoted suffix corresponds to the required 20-pin PDIP package and commercial operating-temperature grade.
Is SN74LS245N in stock and what is the lead time?
Current SN74LS245N stock and lead time should be confirmed through the Request a Quote form on this page. Stock status can vary with manufacturer inventory, package grade, production volume, and order quantity, so an archived listing should not be treated as a current availability commitment. Include the required quantity, date code requirements, and target delivery date in the request.
What is the lead time for SN74LS245N?
The current SN74LS245N lead time is not a fixed device parameter and should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, package grade, and supply conditions. Providing a forecast of annual usage and project schedules can help the supplier evaluate production and delivery planning requirements.
Can SN74LS245N be used for bidirectional parallel data?
Yes, the SN74LS245N is designed for bidirectional eight-bit parallel data communication. According to the Texas Instruments SN74LS245 datasheet, DIR determines whether bus A drives bus B or bus B drives bus A. The direction control applies to all eight channels, and OE should be used to isolate the device whenever another bus master may drive the shared bus.
What is the best drop-in replacement for SN74LS245N?
The closest drop-in choices are legacy-manufacturer versions of the SN74LS245N in the same 20-pin PDIP format, including ON Semiconductor, NXP Semiconductors, and Motorola versions. A same-footprint alternative must still be checked for supply voltage, timing, output-current, temperature-grade, and lifecycle requirements. SN74LS645N is not a direct replacement because its outputs use an open-collector architecture rather than the SN74LS245N three-state output.
Can SN74LS245N replace SN74LS75N?
No, the SN74LS75N and SN74LS245N do not provide the same pin-level interface. The SN74LS245N is a bidirectional eight-bit transceiver with DIR and common output enable, while the SN74LS75N is a different 74LS bus-buffer function. Although both may be octal TTL-family devices in 20-pin packages, they must not be treated as drop-in equivalents without a full pin-function comparison.
When should I choose SN74LS245N over SN74LS373N?
Choose the SN74LS245N when the design requires bidirectional communication between two eight-bit buses with controlled direction and common 3-state output disable. Choose the SN74LS373N when the design needs an eight-bit transparent latch for one-way bus buffering rather than a bidirectional transceiver. The SN74LS245N therefore fits bus ownership transfers, while the SN74LS373N fits registered or latched data paths.
What can replace SN74LS245N?
Legacy SN74LS245N versions from ON Semiconductor, NXP Semiconductors, and Motorola are the most direct alternatives in the verified 20-pin PDIP family, while Texas Instruments also offers the SN74LS245DW in a 20-pin PDIP package. Compatibility must include the DIR and OE behavior, three-state output architecture, 5 V supply requirements, timing, output loading, and temperature grade. Do not substitute an open-collector transceiver as a drop-in replacement.
Is the Texas Instruments SN74LS245N the same as the NXP SN74LS245N?
The Texas Instruments and NXP SN74LS245N parts are positioned as equivalent 74LS octal bus transceivers, but they are not automatically identical for every production decision. According to the manufacturer datasheets, both families use an eight-bit bidirectional three-state architecture with DIR and OE control. Procurement or redesign teams should still compare revision-specific timing, electrical limits, temperature grades, lifecycle status, and package details.

Dữ liệu tham khảo kỹ thuật cho SN74LS245N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the Texas Instruments SN74LS245N for a 5 V TTL system that needs an eight-bit bidirectional bus with a common direction input and common three-state output enable. The SN74LS245DW is the most direct same-brand option when the 20-pin PDIP configuration is required and the alternate orderable suffix is acceptable. ON Semiconductor, NXP, and Motorola SN74LS245N versions can support dual-source procurement, but their lifecycle, revision-specific timing, temperature grades, and electrical limits should be checked individually. Consider SN74ACT245N only when its logic thresholds and timing are suitable for the complete interface; the shared package does not eliminate the need for a timing review. Do not select SN74LS645N as a drop-in substitute because its open-collector output architecture changes the bus implementation. SN74LS373N and SN74LS75N are useful only when the design can change from a bidirectional transceiver to a latched or unidirectional buffer function.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này SN74LS245DW SN74LS245N SN74LS245N SN74LS245N SN74ACT245N
Brand Texas Instruments Texas Instruments ON Semiconductor NXP Semiconductors Motorola Texas Instruments
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Function Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver Octal non-inverting bus transceiver 8-bit bus transceiver
Number of Data Channels 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Output Architecture 3-state 3-state 3-state 3-state 3-state 3-state
Maximum Supply Voltage 5.25 V 5.25 V 5.25 V 5.25 V 5.25 V 5.25 V

Bảo phân biệt quan trọng

  • Common control for all eight channels (vsSN74LS75N)
  • Bidirectional operation with three-state outputs (vsSN74LS373N)
  • Drop-in 20-pin PDIP sourcing options (vsSN74ACT245N)
  • Avoids open-collector substitution errors (vsSN74LS645N)

Ghi chú thiết kế

Never change DIR while the outputs remain enabled and another device may already be driving the shared bus. First deassert OE so that all eight outputs enter the high-impedance state, wait for the relevant timing interval, and then change direction before enabling the new driver. This sequence prevents overlap between the A-side and B-side drivers.

Place the supply bypass capacitor close to pin 16 and provide a short, low-impedance connection to the ground plane. The bypass network should suppress switching noise on the common supply rail while keeping transient current paths away from sensitive signal traces. Confirm capacitor voltage rating, ESR requirements, and recommended placement against the manufacturer datasheet.

Route the eight A-side and eight B-side data lines as a parallel bus with consistent geometry and terminated points where appropriate. Keep DIR and OE traces away from high-current switching nodes to reduce false transition detection. If the transceiver sits at the end of a long bus, verify signal integrity, capacitance, and propagation-delay margin at the actual loading rather than relying only on nominal logic timing.

Account for the combined effect of transceiver propagation delay, remote-device timing, bus capacitance, and any pull-up or pull-down components. The three-state output architecture removes contention only while OE is inactive; it does not resolve timing overlap between two enabled devices. Establish the bus ownership protocol and minimum dead time before connecting the transceiver to legacy asynchronous equipment.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer materials describe the device as a 74LS logic IC but do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for this ordering code.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

sn74ls245n datasheet sn74ls245n pinout sn74ls245n datasheet pdf sn74ls245n pdf sn74ls245n que es SN74LS245N 20-pin PDIP SN74LS245N DIR OE pinout SN74LS245N 5.25V transceiver SN74LS245N drop-in replacement SN74LS245N equivalent SN74LS245N vs SN74ACT245N Texas Instruments SN74LS245N SN74LS245N price SN74LS245N stock SN74LS245N application circuit

Các bộ phận và thuật ngữ liên quan

Texas Instruments SN74LS245N SN74LS245 SN74LS245DW SN74ACT245N SN74LS75N SN74LS373N SN74LS645N ON Semiconductor NXP Semiconductors Motorola octal bus transceiver bidirectional transceiver three-state output logic IC digital interface IC TTL asynchronous parallel bus DIR control output enable high-impedance state 20-pin PDIP through-hole package bus contention
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ