STM32F407IET6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics
MPN: STM32F407IET6 ✗ Cuối đờiSTM32F407IET6 Tóm tắt
A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and communication interfaces into a single package. STM32F4 devices provide higher processing performance than basic Cortex-M microcontrollers while retaining low-power embedded-control characteristics. The STM32F407IET6 is therefore positioned between simple microcontrollers and more complex application processors for industrial, communications, audio, and embedded-control designs.
The verified data identifies an ARM Cortex-M4 core with FPU, operation up to 168 MHz, 512 KB of Flash, and 192 KB of SRAM. The device also belongs to the STM32F4 series and supports communication and peripheral functions referenced in the retrieved family information. Its 32-bit architecture and floating-point capability suit real-time control loops, signal processing, network-connected equipment, and human-interface systems.
The 176-LQFP package provides a large pin count compared with small-outline MCUs, supporting a broader selection of alternate-function, power, ground, debug, and communications connections. Its 24 x 24 mm body is physically larger than compact 48-pin or 64-pin devices, so PCB land patterns and assembly tooling must be designed for the 176-pin package rather than a smaller STM32 variant.
Typical applications include industrial automation, Ethernet-connected control systems, USB or serial communications equipment, audio and signal-processing systems, and embedded gateways. The 168 MHz Cortex-M4 core provides more compute headroom than lower-frequency general-purpose MCUs, while the 192 KB SRAM allows larger buffers than basic devices. Designers should still verify clock tree, power, pin multiplexing, memory, and peripheral requirements against the relevant STM32F407 datasheet before layout.
This page combines verified distributor and manufacturer-search data, explicit data-gap markers, application guidance, and replacement criteria. It does not infer unverified electrical limits, pin assignments, pricing tiers, or lifecycle claims from generic STM32 family descriptions.
Bộ thay thế dễ dàng lắp đặt cho STM32F407IET6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F407IET6 (cùng hình factor và footprint) — khác nhau ở Package, Communication Interfaces, ART Accelerator, SRAM, Flash Memory.
STM32F407IET6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32F407VET6
✅ Drop-In✓ Còn hàng
$3.6094 / Đơn vị
Xem tài liệu →STM32F407IET6TR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F407IEH6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32F407IGH6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32F407IET6 Tỷ lệ tối đa & tính chất điện
| Architecture | 32-bit ARM Cortex-M4 with FPU |
| Maximum CPU Frequency | 168 MHz |
| Flash Memory | 512 KB |
| SRAM | 192 KB |
| Core Performance | 210 DMIPS |
| Instruction Throughput | 1.25 DMIPS/MHz |
| Memory Protection Unit | Supported |
| ART Accelerator | Adaptive Real-Time accelerator |
| DSP Capability | DSP instruction support |
| Hộp | 176-LQFP (24 x 24 mm) |
| Kiểu lắp đặt | Surface Mount |
| Ethernet MAC | Supported |
| USB OTG | High-Speed and Full-Speed supported |
| ADC | 3 ADC instances |
| Timers | 17 timer instances |
| Communication Interfaces | 15 communication interfaces |
| Camera Interface | Supported |
Hướng dẫn cấu hình chân STM32F407IET6 176-lqfp (24 x 24 mm)
Cấu hình chân cho STM32F407IET6 (176-lqfp (24 x 24 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F407IET6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F407IET6 phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Ethernet-Connected Embedded Gateway, USB Communications Peripherals, Real-Time Signal Processing, Audio and Communications Control, Camera Interface Embedded System.
Industrial Automation Controller
The STM32F407IET6 fits an industrial automation controller because its 168 MHz Cortex-M4 core, FPU, 512 KB Flash, and 192 KB SRAM support control logic, communications, and moderate data buffering. The verified device family information identifies Ethernet MAC, USB OTG, three ADC instances, 17 timers, and 15 communication interfaces, which can support sensing, actuator timing, supervisory control, and service connectivity. Use the 176-LQFP package when the design needs its larger pin count and 24 x 24 mm land pattern. Before production, verify operating temperature, isolation, EMC, power regulation, watchdog strategy, and controller qualification; those requirements are not fully present in the supplied verified data.
Được đề xuất
Ethernet-Connected Embedded Gateway
STM32F407IET6 is suitable for an Ethernet-connected embedded gateway because the verified data identifies an Ethernet MAC and a 168 MHz Cortex-M4 core. The MCU can handle protocol processing, local control, and real-time tasks while the larger 176-LQFP package exposes more communication and alternate-function options than a small-outline device. The 512 KB Flash supports a meaningful embedded application image, and 192 KB SRAM can accommodate protocol buffers. The exact Ethernet PHY, transceiver, connector, pin multiplexing, and electrical isolation are not supplied, so engineers must verify those interfaces and EMI requirements against the manufacturer datasheet before layout.
Được đề xuất
USB Communications Peripherals
The STM32F407IET6 supports USB OTG high-speed and full-speed according to the verified family information, making it relevant to USB communications, configuration adapters, and service interfaces. Its Cortex-M4 FPU can process protocol and control workloads at up to 168 MHz, while 192 KB SRAM provides room for buffers. The device also offers the broader STM32F407 communications feature set, including Ethernet MAC and multiple interfaces. USB connector protection, power detection, transceiver or PHY integration, impedance-controlled routing, and enumeration behavior must be checked in the authoritative STM32F407 datasheet because these details are not fully captured in the supplied search snippets.
Được đề xuất
Real-Time Signal Processing
STM32F407IET6 is a practical choice for real-time signal-processing tasks that benefit from a 168 MHz ARM Cortex-M4 core with FPU, DSP instructions, and 210 DMIPS performance. The floating-point unit can reduce the computational burden of control and signal calculations, while 512 KB Flash and 192 KB SRAM support code, lookup data, and acquisition buffers. The 176-LQFP package is useful when the design needs several ADC, timer, communications, or debug connections. Exact ADC resolution, sample rate, trigger behavior, DAC availability, and timing limits are not all present in the verified data and must be confirmed before selecting analog front-end components or sampling rates.
Được đề xuất
Audio and Communications Control
The STM32F407IET6 can serve as the control processor in audio and communications equipment because its Cortex-M4 FPU supports efficient real-time arithmetic and the verified family data identifies USB, Ethernet, camera, timers, and multiple communication interfaces. The 192 KB SRAM is more useful than the memory found in small general-purpose MCUs, while the 176-LQFP package provides additional routing flexibility. Actual audio performance depends on external codecs, clocking, DMA behavior, and signal-chain design; those parameters are not fully specified in the supplied source. Confirm codec interface support, audio clocks, package pin availability, and electromagnetic requirements before release.
Được đề xuất
Camera Interface Embedded System
STM32F407IET6 is relevant to camera-interface embedded systems because the verified family description identifies camera-interface support alongside a 168 MHz Cortex-M4 core and 192 KB SRAM. It can coordinate image acquisition, control logic, communications, and local storage decisions in a compact embedded controller. The larger 176-LQFP package can expose more camera and peripheral connections than smaller MCUs. Camera resolution, frame timing, parallel-interface widths, DMA behavior, voltage levels, connector requirements, and bandwidth are not provided in the verified data. Validate those specifications and the exact STM32F407 device variant before connecting a camera module.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F407IET6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F407IET6 | STM32F407VET6 | STM32F407IET6TR | STM32F407IEH6 | STM32F407IGH6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 176-LQFP (24 x 24 mm) | 176-LQFP (24 x 24 mm) | 176-LQFP (24 x 24 mm) | 176-LQFP (24 x 24 mm) | 176-LQFP (24 x 24 mm) | 100-LQFP (14 x 14 mm) |
Bảo phân biệt quan trọng
- High-performance Cortex-M4 processing (vsSTM32F103ZET6)
- Large integrated peripheral set (vsSTM32F407IGH6)
- Large-package integration (vsSTM32F103ZET6)
- Memory and real-time performance balance (vsSTM32F407VET6)
Ghi chú thiết kế
Use the manufacturer’s 176-LQFP land pattern and verify the 24 x 24 mm body dimensions against the PCB library before routing. Keep power, ground, decoupling, clock, debug, and communication pins grouped according to the STM32F407 datasheet. The supplied data confirms the package but does not provide the complete pin map, so do not derive land-pattern or alternate-function assignments from a smaller STM32 package.
Plan the power architecture around the exact STM32F407IET6 voltage and decoupling requirements in the current STMicroelectronics datasheet. The verified data confirms a 168 MHz Cortex-M4 core and extensive communications peripherals, but it does not provide operating-voltage limits or regulator recommendations. Use local bulk and high-frequency decoupling, controlled clock power-up, and a debug strategy that allows brownout or power-sequencing faults to be diagnosed safely.
Do not treat STM32F407 family variants as automatically interchangeable. The retrieved alternatives identify related MPNs, but the supplied data does not verify complete pin, memory, temperature, or suffix equivalence. Check the exact ordering code, package drawing, pin names, clock limits, peripheral mapping, boot configuration, and firmware support. A same-family name or same nominal package is not sufficient evidence for a drop-in replacement.
Thermal analysis must be based on actual supply voltage, I/O activity, clock loading, ambient temperature, and board copper rather than CPU frequency alone. The supplied data confirms a 168 MHz core but does not provide power dissipation or junction-temperature limits. Use the manufacturer’s electrical characteristics and estimate total board dissipation with the intended clock, peripherals, and external load before selecting enclosure or copper-area requirements.
Thông tin tuân thủ
The supplied verified data does not explicitly provide compliance declarations for the exact STM32F407IET6. Do not infer compliance from comparison pages or general STMicroelectronics family information.