STM32L496AGI3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
MPN: STM32L496AGI3 ✓ Hoạt độngSTM32L496AGI3 Tóm tắt
An ultra-low-power microcontroller is an integrated circuit that executes embedded control functions while minimizing energy consumption during active operation and low-power modes. The STM32L4 family belongs to the microcontroller hierarchy, combining a real-time processor core with memory, communications peripherals, timers, analog interfaces, and power-management functions. Its role is to sample inputs, execute control algorithms, manage connected peripherals, and provide deterministic embedded processing within one compact device.
The principal specifications are an 80 MHz Arm Cortex-M4 core, 1 MB of Flash memory, and operation from a 3.3 V supply. The Cortex-M4 architecture supports 32-bit processing and floating-point instructions, making the device suitable for control workloads that benefit from efficient numerical computation. Additional listed capabilities include USB OTG, an LCD interface, and DFSD support, broadening its usefulness beyond basic digital control.
The STM32L496AGI3 combines substantial Flash capacity with a relatively small 169-UFBGA land pattern. Its 32-bit architecture, integrated floating-point unit, and peripheral set allow software-driven motor, communications, user-interface, and industrial-control functions to be consolidated into one device. The 80 MHz operating rate provides additional compute headroom for interrupt-heavy control loops and protocol processing while the ultra-low-power positioning supports designs where energy efficiency is a primary requirement.
Typical applications include industrial sensor controllers, USB-connected data-acquisition equipment, compact human-machine interfaces, digital control modules, communications equipment, and low-power embedded platforms. The 1 MB Flash capacity supports larger firmware images, while USB OTG, LCD support, and DFSD address common connectivity, display, and data-storage requirements without requiring several discrete interface controllers.
PCB planning must account for the 169-ball UFBGA geometry, high-density escape routing, via access, and thermal performance. Place decoupling capacitors close to the appropriate supply pins, preserve a continuous ground reference beneath the device where layout rules allow, and validate the complete stack-up and footprint against the manufacturer package drawing. Firmware and peripheral assignments should be confirmed through the STM32L496AG product documentation.
Bộ thay thế dễ dàng lắp đặt cho STM32L496AGI3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L496AGI3 (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSTM32L496AGI3 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 1 MB |
| Programmable Memory Organization | 1M x 8 bits |
| Điện áp cung cấp hoạt động | 3.3 V |
| Architecture | 32-bit RISC |
| USB Support | USB OTG |
| Display Support | LCD interface |
| Data Storage Support | DFSD |
| Hộp | 169-UFBGA (7 x 7 mm) |
| Kiểu lắp đặt | Surface mount |
| Component Type | Microcontroller IC |
| Program Memory Type | Flash |
| Core Architecture | Arm Cortex-M4 |
| Temperature Grade Code | I3 grade |
Hướng dẫn cấu hình chân STM32L496AGI3 169-ufbga (7 x 7 mm)
Cấu hình chân cho STM32L496AGI3 (169-ufbga (7 x 7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L496AGI3.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L496AGI3 phù hợp cho 6 Áp dụngs: Industrial Sensor and Condition Monitoring, USB Data-Acquisition Equipment, Compact Human-Machine Interfaces, Communications and Network Interface Modules, Digital Motor and Process Control, Portable and Battery-Powered Embedded Devices.
Industrial Sensor and Condition Monitoring
The STM32L496AGI3 fits compact condition-monitoring controllers because its Arm Cortex-M4 core operates up to 80 MHz while providing 1 MB of Flash for signal-processing code, filtering routines, communication stacks, and local data logging. The integrated floating-point unit is useful when conditioning sensor measurements or executing control calculations. Its ultra-low-power positioning also supports battery-assisted or energy-conscious industrial monitoring. Designers should place bypass capacitors close to each supply group, maintain continuous ground-return paths, and budget for the 169-UFBGA escape-routing density. DFSD capability can expand local storage options, while the LCD interface permits local status displays on portable instrumentation.
Được đề xuất
USB Data-Acquisition Equipment
The STM32L496AGI3 is suitable for USB-connected data-acquisition equipment because USB OTG is integrated into a microcontroller that also operates up to 80 MHz and includes 1 MB of Flash. Engineers can use the additional processing bandwidth for buffering, digital filtering, protocol handling, and control logic rather than relying on a simple data-transfer function. The 169-UFBGA package reduces board area but requires careful high-speed USB routing, continuous reference planes, and controlled impedance. Validate the complete USB topology, power supply behavior, and connector implementation against the manufacturer documentation and applicable interface requirements before production release.
Được đề xuất
Compact Human-Machine Interfaces
The STM32L496AGI3 fits compact human-machine interfaces because it combines an 80 MHz Cortex-M4 core, 1 MB of Flash, and LCD support in a single 169-UFBGA package. The floating-point unit supports responsive graphical and control calculations, while 1 MB of Flash can accommodate a substantial interface application and supporting protocol logic. The LCD interface reduces the need for a separate display controller in suitable designs. Engineers should budget display-bus timing, panel-specific power sequencing, and backlight control carefully. Because the package is dense, fanout and via-in-pad decisions should follow the manufacturer land pattern and the display module’s mechanical constraints.
Được đề xuất
Communications and Network Interface Modules
The STM32L496AGI3 can serve as the main controller in communications modules because its 80 MHz Cortex-M4 core and 1 MB of Flash provide resources for protocol handling, data framing, routing logic, and supervisory functions. USB OTG adds a direct host or device option, while the floating-point unit can accelerate data-intensive routines. The same package is useful for dense modules where connector and memory placement are constrained. Designers should separate analog and digital return paths, provide local decoupling for communication transceivers, and keep high-speed routes away from sensitive LCD or sensor inputs. Confirm transceiver timing, impedance, isolation, and power requirements independently of the microcontroller selection.
Được đề xuất
Digital Motor and Process Control
The STM32L496AGI3 is well suited to compact digital-control modules because its 80 MHz 32-bit Cortex-M4 core can service multiple control loops and communications tasks, while the FPU supports proportional, integral, derivative, filtering, and transform calculations. Its 1 MB of Flash accommodates control software, diagnostics, and communication stacks. Ultra-low-power characteristics are valuable in equipment that spends substantial time idle or in reduced-activity operating states. Timing-critical outputs still require careful peripheral configuration and pin planning. Validate PWM behavior, timer channels, analog front-end isolation, thermal margins, and fault-safe shutdown paths with the complete motor or process-control subsystem.
Được đề xuất
Portable and Battery-Powered Embedded Devices
The STM32L496AGI3 fits portable embedded devices because its ultra-low-power MCU architecture combines an 80 MHz Cortex-M4 core, 1 MB of Flash, and USB OTG without requiring a separate host processor. That combination supports responsive user interaction, local control, data transfer, and display functions in a compact assembly. The 169-UFBGA package helps minimize board area, although assembly complexity and layout density increase. Battery-powered designs should select capacitors and supporting circuitry with appropriate leakage characteristics, measure sleep-mode behavior in the finished system, and account for regulator efficiency and quiescent current. USB power states and battery transitions must be tested across the complete operating range.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L496AGI3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Bảo phân biệt quan trọng
- Combines 80 MHz Cortex-M4 processing with 1 MB of Flash (vsSTM32L496RGT6)
- Integrated USB OTG, LCD, and DFSD support (vsSTM32L496RGT6)
- Floating-point-enabled 32-bit control platform (vsSTM32G031J6M6TR)
- Space-efficient 7 mm by 7 mm package (vsSTM32L496RGT6)
Ghi chú thiết kế
Treat the 169-UFBGA land pattern as a high-density routing problem. Assign escape vias before placing the BGA footprint, keep via fields away from solderable ball locations where assembly capability is limited, and route supply connections on multiple layers where practical. Validate the footprint, solder-mask definition, and assembly process against the current manufacturer package drawing rather than scaling a generic 169-ball footprint.
Place the required bypass capacitors directly beside their associated package supply pins and maintain a low-impedance ground return. Separate noisy digital switching paths from sensitive analog inputs when the board also supports sensors or communication transceivers. Check the 3.3 V operating supply against the complete design, including voltage tolerance, sequencing, startup behavior, and regulator headroom across the selected operating temperature range.
Power-loss and thermal-rise analysis should use the actual operating frequency, voltage, and I/O loading of the finished board. A compact UFBGA can depend heavily on its PCB thermal design for heat spreading, so maximize useful copper area without compromising routing. Use the manufacturer thermal model for the exact package and stack-up where applicable, and verify the hottest expected operating condition rather than relying only on ambient-temperature estimates.
Do not substitute a different STM32L496 orderable code solely because it has the same core and memory. The STM32L496AGI3 suffix identifies a specific 169-UFBGA configuration, and package changes can alter pin count, exposed connections, assembly requirements, and peripheral mapping. For any proposed replacement, verify the exact pinout, supply pins, ground connections, boot behavior, clock pins, and PCB land pattern before approving a drop-in claim.
Thông tin tuân thủ
No specific environmental or automotive compliance declarations were identified for the exact ordering code in the cited product pages.