STMicroelectronics

STM32L496AGI3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

料号: STM32L496AGI3 ✓ 量产中
3.3 V Vdss 169-UFBGA (7 x 7 mm) Package 80 MHz Speed 1 MB Memory
最小起订量: 1 |

STM32L496AGI3 概述

STMicroelectronics STM32L496AGI3 is an ultra-low-power, 32-bit Arm Cortex-M4 microcontroller operating up to 80 MHz, with 1 MB of Flash memory and a 169-ball UFBGA package measuring 7 mm by 7 mm. The device combines a high-performance 32-bit RISC core, an integrated floating-point unit, USB OTG, LCD support, and DFSD capability in a compact package designed for low-power embedded systems.

An ultra-low-power microcontroller is an integrated circuit that executes embedded control functions while minimizing energy consumption during active operation and low-power modes. The STM32L4 family belongs to the microcontroller hierarchy, combining a real-time processor core with memory, communications peripherals, timers, analog interfaces, and power-management functions. Its role is to sample inputs, execute control algorithms, manage connected peripherals, and provide deterministic embedded processing within one compact device.

The principal specifications are an 80 MHz Arm Cortex-M4 core, 1 MB of Flash memory, and operation from a 3.3 V supply. The Cortex-M4 architecture supports 32-bit processing and floating-point instructions, making the device suitable for control workloads that benefit from efficient numerical computation. Additional listed capabilities include USB OTG, an LCD interface, and DFSD support, broadening its usefulness beyond basic digital control.

The STM32L496AGI3 combines substantial Flash capacity with a relatively small 169-UFBGA land pattern. Its 32-bit architecture, integrated floating-point unit, and peripheral set allow software-driven motor, communications, user-interface, and industrial-control functions to be consolidated into one device. The 80 MHz operating rate provides additional compute headroom for interrupt-heavy control loops and protocol processing while the ultra-low-power positioning supports designs where energy efficiency is a primary requirement.

Typical applications include industrial sensor controllers, USB-connected data-acquisition equipment, compact human-machine interfaces, digital control modules, communications equipment, and low-power embedded platforms. The 1 MB Flash capacity supports larger firmware images, while USB OTG, LCD support, and DFSD address common connectivity, display, and data-storage requirements without requiring several discrete interface controllers.

PCB planning must account for the 169-ball UFBGA geometry, high-density escape routing, via access, and thermal performance. Place decoupling capacitors close to the appropriate supply pins, preserve a continuous ground reference beneath the device where layout rules allow, and validate the complete stack-up and footprint against the manufacturer package drawing. Firmware and peripheral assignments should be confirmed through the STM32L496AG product documentation.

直接替换替代料: STM32L496AGI3 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32L496AGI3 (相同外形与封装尺寸) ——差异在于 Mounting Type, Package.

STMicroelectronics
Mounting Type: Surface Mount (BGA)
Package: 169-UFBGA (7x7 mm)
对比 STM32L496AGI3 →

该产品暂无直接替换替代料。

请求替代料

STM32L496AGI3 最大额定值与电气特性

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz
Flash Memory 1 MB
Programmable Memory Organization 1M x 8 bits
工作电源电压 3.3 V
Architecture 32-bit RISC
USB Support USB OTG
Display Support LCD interface
Data Storage Support DFSD
封装 169-UFBGA (7 x 7 mm)
安装类型 Surface mount
Component Type Microcontroller IC
Program Memory Type Flash
Core Architecture Arm Cortex-M4
Temperature Grade Code I3 grade

STM32L496AGI3 169-ufbga (7 x 7 mm) 引脚配置指南

STM32L496AGI3(169-ufbga (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32L496AGI3 的 169-ufbga (7 x 7 mm) 封装引脚图

暂无详细引脚数据: STM32L496AGI3.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32L496AGI3 适用于 6 应用s: Industrial Sensor and Condition Monitoring, USB Data-Acquisition Equipment, Compact Human-Machine Interfaces, Communications and Network Interface Modules, Digital Motor and Process Control, Portable and Battery-Powered Embedded Devices.

🏭

Industrial Sensor and Condition Monitoring

The STM32L496AGI3 fits compact condition-monitoring controllers because its Arm Cortex-M4 core operates up to 80 MHz while providing 1 MB of Flash for signal-processing code, filtering routines, communication stacks, and local data logging. The integrated floating-point unit is useful when conditioning sensor measurements or executing control calculations. Its ultra-low-power positioning also supports battery-assisted or energy-conscious industrial monitoring. Designers should place bypass capacitors close to each supply group, maintain continuous ground-return paths, and budget for the 169-UFBGA escape-routing density. DFSD capability can expand local storage options, while the LCD interface permits local status displays on portable instrumentation.

🖥️

USB Data-Acquisition Equipment

The STM32L496AGI3 is suitable for USB-connected data-acquisition equipment because USB OTG is integrated into a microcontroller that also operates up to 80 MHz and includes 1 MB of Flash. Engineers can use the additional processing bandwidth for buffering, digital filtering, protocol handling, and control logic rather than relying on a simple data-transfer function. The 169-UFBGA package reduces board area but requires careful high-speed USB routing, continuous reference planes, and controlled impedance. Validate the complete USB topology, power supply behavior, and connector implementation against the manufacturer documentation and applicable interface requirements before production release.

📺

Compact Human-Machine Interfaces

The STM32L496AGI3 fits compact human-machine interfaces because it combines an 80 MHz Cortex-M4 core, 1 MB of Flash, and LCD support in a single 169-UFBGA package. The floating-point unit supports responsive graphical and control calculations, while 1 MB of Flash can accommodate a substantial interface application and supporting protocol logic. The LCD interface reduces the need for a separate display controller in suitable designs. Engineers should budget display-bus timing, panel-specific power sequencing, and backlight control carefully. Because the package is dense, fanout and via-in-pad decisions should follow the manufacturer land pattern and the display module’s mechanical constraints.

🌐

Communications and Network Interface Modules

The STM32L496AGI3 can serve as the main controller in communications modules because its 80 MHz Cortex-M4 core and 1 MB of Flash provide resources for protocol handling, data framing, routing logic, and supervisory functions. USB OTG adds a direct host or device option, while the floating-point unit can accelerate data-intensive routines. The same package is useful for dense modules where connector and memory placement are constrained. Designers should separate analog and digital return paths, provide local decoupling for communication transceivers, and keep high-speed routes away from sensitive LCD or sensor inputs. Confirm transceiver timing, impedance, isolation, and power requirements independently of the microcontroller selection.

⚡

Digital Motor and Process Control

The STM32L496AGI3 is well suited to compact digital-control modules because its 80 MHz 32-bit Cortex-M4 core can service multiple control loops and communications tasks, while the FPU supports proportional, integral, derivative, filtering, and transform calculations. Its 1 MB of Flash accommodates control software, diagnostics, and communication stacks. Ultra-low-power characteristics are valuable in equipment that spends substantial time idle or in reduced-activity operating states. Timing-critical outputs still require careful peripheral configuration and pin planning. Validate PWM behavior, timer channels, analog front-end isolation, thermal margins, and fault-safe shutdown paths with the complete motor or process-control subsystem.

📱

Portable and Battery-Powered Embedded Devices

The STM32L496AGI3 fits portable embedded devices because its ultra-low-power MCU architecture combines an 80 MHz Cortex-M4 core, 1 MB of Flash, and USB OTG without requiring a separate host processor. That combination supports responsive user interaction, local control, data transfer, and display functions in a compact assembly. The 169-UFBGA package helps minimize board area, although assembly complexity and layout density increase. Battery-powered designs should select capacitors and supporting circuitry with appropriate leakage characteristics, measure sleep-mode behavior in the finished system, and account for regulator efficiency and quiescent current. USB power states and battery transitions must be tested across the complete operating range.

What is the operating frequency of the STM32L496AGI3?
The STM32L496AGI3 operates at up to 80 MHz using an Arm Cortex-M4 processor core. According to the STMicroelectronics STM32L496AG product page, the STM32L496xx family is based on a high-performance 32-bit Arm Cortex-M4 RISC core capable of reaching 80 MHz. This processing rate provides useful headroom for real-time control, communications, data processing, and interrupt-driven firmware while retaining the low-power positioning of the STM32L4 family.
How much Flash memory does the STM32L496AGI3 have?
The STM32L496AGI3 contains 1 MB of Flash memory organized as 1M x 8 bits. The DigiKey listing identifies the device as a 32-bit, 80 MHz Cortex-M4 microcontroller with 1 MB of Flash. This memory capacity supports comparatively substantial application code, configuration data, protocol libraries, and boot logic, making the part suitable for consolidated embedded designs rather than minimal control-only products.
What package does the STM32L496AGI3 use?
The STM32L496AGI3 uses a 169-UFBGA package measuring 7 mm by 7 mm. This package information is stated in the DigiKey product listing, while Arrow identifies the same device as a 169-pin UFBGA. The dense land pattern requires careful escape routing and assembly planning. Use the manufacturer package drawing and land pattern when defining PCB pads, solder-mask openings, via placement, and assembly inspection criteria.
Does the STM32L496AGI3 support USB OTG and an LCD interface?
Yes, the STM32L496AGI3 supports USB OTG and an LCD interface. The Mouser listing identifies USB OTG and LCD support in addition to the 80 MHz Cortex-M4 core and 1 MB of Flash. These peripherals make the microcontroller suitable for USB-connected peripherals, compact graphical user interfaces, and embedded systems that need more connectivity than a basic GPIO-only controller. Final peripheral availability and configuration should be confirmed in the product documentation.
Where can I download the STM32L496AGI3 datasheet and pinout information?
The STM32L496AGI3 datasheet and package information are available from the official STMicroelectronics STM32L496AG product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l496ag.html. Use the package drawing, pin-definition tables, electrical characteristics, and recommended land-pattern information from that documentation. The page is the authoritative starting point for assignments, pin multiplexing, electrical limits, and 169-UFBGA footprint design.
Where can I buy STM32L496AGI3 online and request a quote?
The STM32L496AGI3 can be requested through the “Request a Quote” form on this product page. The form is the appropriate route for checking current unit availability, order quantities, and delivery timing without relying on a stale price. STMicroelectronics also lists the exact orderable MPN in its official eStore, while the manufacturer product page provides technical documentation and product-status information.
What is the price of the STM32L496AGI3?
Current pricing for the STM32L496AGI3 should be obtained through the “Request a Quote” form on this page. Quote-based procurement accounts for quantity, component condition, requested delivery timing, and the purchasing channel, so a static price would not remain current. The form can also clarify minimum order quantity and lead time for the exact 169-UFBGA ordering code.
What is the lead time and stock status for STM32L496AGI3?
The STM32L496AGI3 is currently listed by its manufacturer for direct ordering, and multiple market listings indicate active market availability. Current stock, allocation, and lead time should nevertheless be confirmed through the “Request a Quote” form on this page. Supply status can vary by quantity and date, particularly for a 169-UFBGA microcontroller requiring specialized assembly and board-density design.
Is the STM32L496AGI3 in stock?
The STM32L496AGI3 is actively offered for ordering, and current distributor listings indicate availability. For a firm stock confirmation against the required quantity, use the “Request a Quote” form on this page. That request should identify the exact MPN, desired quantity, delivery destination, and target date so the response reflects current supply rather than an undated availability indication.
STM32L496AGI3 vs STM32L496RGT6 - which one fits an existing PCB?
The STM32L496AGI3 and STM32L496RGT6 are not interchangeable drop-in parts because their orderable package configurations differ: STM32L496AGI3 is specified in 169-UFBGA, while STM32L496RGT6 is a different package option. Use the STM32L496AGI3 for a board designed around the 169-UFBGA land pattern. A change to another STM32L496 package requires PCB layout changes and a complete footprint, assembly, and signal-integrity review.
What is the difference between STM32L496AGI3 and other STM32L496 devices?
The STM32L496AGI3 combines an 80 MHz Arm Cortex-M4 core, 1 MB of Flash, USB OTG, LCD support, DFSD, and a 169-UFBGA package. Other STM32L496 orderable devices may use different pin counts, package types, temperature grades, or ordering suffixes. Because microcontroller replacement depends on both electrical pin mapping and the physical footprint, compare the complete ordering information rather than relying only on the STM32L496 family name.
When should I choose STM32L496AGI3 instead of another STM32L4 microcontroller?
Choose STM32L496AGI3 when the design specifically requires an 80 MHz Arm Cortex-M4 MCU, 1 MB of Flash, USB OTG, LCD support, DFSD capability, and the 169-UFBGA footprint. Select a different STM32L4 device when the board uses another package or when its memory and peripheral set provides a better fit. Package compatibility, pin multiplexing, supply requirements, and firmware configuration must be confirmed before any substitution.
What can replace the STM32L496AGI3?
No independently verified drop-in replacement was identified for the exact STM32L496AGI3 ordering code. The 169-UFBGA package, 169-ball pin arrangement, Flash configuration, peripheral assignments, and electrical characteristics must all match for a replacement to be drop-in compatible. Use the “Request a Quote” form to discuss exact-MPN sourcing, and require the manufacturer or component supplier to document pin and parameter compatibility before changing the design.
Is the STM32L496AGI3 the same as STM32L496RGT6?
No, the STM32L496AGI3 is not the same package configuration as STM32L496RGT6. The STM32L496AGI3 is a 169-UFBGA device, so it can only be treated as a drop-in candidate for a PCB already designed around that exact land pattern and pinout. Replacing it with another package requires changing the PCB footprint and reassessing routing, thermal behavior, assembly yield, and exposed-ball connections.
What are the key specifications of STM32L496AGI3 that engineers should know?
The STM32L496AGI3 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 core with FPU, operating up to 80 MHz. It provides 1 MB of Flash organized as 1M x 8 bits, operates from a 3.3 V supply, and includes USB OTG, LCD, and DFSD support. The device is supplied in a compact 169-UFBGA package measuring 7 mm by 7 mm, making high-density PCB layout planning essential.

工程参考数据: STM32L496AGI3 ——对比、设计指导和合规信息。

选型指南

Choose the STM32L496AGI3 when the board requires an 80 MHz Arm Cortex-M4 core with FPU, 1 MB of Flash, USB OTG, LCD support, DFSD, and the exact 169-UFBGA footprint. It is particularly appropriate for compact industrial, communication, data-acquisition, and human-machine-interface products where processing performance and interface integration matter. STM32L496RGT6 should be considered only when its different package and pin configuration match the target board. Lower-power STM32G0-family devices can be preferable for small distributed sensor nodes, but the STM32L496AGI3 provides more Flash, higher clock performance, and a broader interface set. No cross-brand drop-in substitute was verified, so any second-source proposal requires a formal pinout, electrical, firmware, and footprint equivalence review.

关键差异点

  • Combines 80 MHz Cortex-M4 processing with 1 MB of Flash (对比 STM32L496RGT6)
  • Integrated USB OTG, LCD, and DFSD support (对比 STM32L496RGT6)
  • Floating-point-enabled 32-bit control platform (对比 STM32G031J6M6TR)
  • Space-efficient 7 mm by 7 mm package (对比 STM32L496RGT6)

设计说明

Treat the 169-UFBGA land pattern as a high-density routing problem. Assign escape vias before placing the BGA footprint, keep via fields away from solderable ball locations where assembly capability is limited, and route supply connections on multiple layers where practical. Validate the footprint, solder-mask definition, and assembly process against the current manufacturer package drawing rather than scaling a generic 169-ball footprint.

Place the required bypass capacitors directly beside their associated package supply pins and maintain a low-impedance ground return. Separate noisy digital switching paths from sensitive analog inputs when the board also supports sensors or communication transceivers. Check the 3.3 V operating supply against the complete design, including voltage tolerance, sequencing, startup behavior, and regulator headroom across the selected operating temperature range.

Power-loss and thermal-rise analysis should use the actual operating frequency, voltage, and I/O loading of the finished board. A compact UFBGA can depend heavily on its PCB thermal design for heat spreading, so maximize useful copper area without compromising routing. Use the manufacturer thermal model for the exact package and stack-up where applicable, and verify the hottest expected operating condition rather than relying only on ambient-temperature estimates.

Do not substitute a different STM32L496 orderable code solely because it has the same core and memory. The STM32L496AGI3 suffix identifies a specific 169-UFBGA configuration, and package changes can alter pin count, exposed connections, assembly requirements, and peripheral mapping. For any proposed replacement, verify the exact pinout, supply pins, ground connections, boot behavior, clock pins, and PCB land pattern before approving a drop-in claim.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific environmental or automotive compliance declarations were identified for the exact ordering code in the cited product pages.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM32L496AGI3 STM32L496AGI3 datasheet STM32L496AGI3 specifications STM32L496AGI3 pinout STM32L496AGI3 datasheet pdf STM32L496AGI3 equivalent STM32L496AGI3 replacement STM32L496AGI3 cross reference STM32L496AGI3 vs STM32L496RGT6 STM32L496AGI3 footprint STM32L496AGI3 price STM32L496AGI3 stock STMicroelectronics STM32L496AGI3 STM32L496AG 169 UFBGA

相关元器件 & 术语

STMicroelectronics STM32L496AGI3 STM32L496AG STM32L496xx STM32L496RGT6 Arm Cortex-M4 Arm Cortex-M4 FPU 32-bit RISC ultra-low-power microcontroller microcontroller embedded processor semiconductor 1 MB Flash memory 80 MHz 3.3 V USB OTG LCD interface DFSD 169-UFBGA UFBGA package surface mount 7 x 7 mm package USB data acquisition industrial control DFUSB data acquisition battery-powered embedded device
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情