STM32L496AGI3 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
MPN: STM32L496AGI3 ✓ פעילSTM32L496AGI3 סקירה
An ultra-low-power microcontroller is an integrated circuit that executes embedded control functions while minimizing energy consumption during active operation and low-power modes. The STM32L4 family belongs to the microcontroller hierarchy, combining a real-time processor core with memory, communications peripherals, timers, analog interfaces, and power-management functions. Its role is to sample inputs, execute control algorithms, manage connected peripherals, and provide deterministic embedded processing within one compact device.
The principal specifications are an 80 MHz Arm Cortex-M4 core, 1 MB of Flash memory, and operation from a 3.3 V supply. The Cortex-M4 architecture supports 32-bit processing and floating-point instructions, making the device suitable for control workloads that benefit from efficient numerical computation. Additional listed capabilities include USB OTG, an LCD interface, and DFSD support, broadening its usefulness beyond basic digital control.
The STM32L496AGI3 combines substantial Flash capacity with a relatively small 169-UFBGA land pattern. Its 32-bit architecture, integrated floating-point unit, and peripheral set allow software-driven motor, communications, user-interface, and industrial-control functions to be consolidated into one device. The 80 MHz operating rate provides additional compute headroom for interrupt-heavy control loops and protocol processing while the ultra-low-power positioning supports designs where energy efficiency is a primary requirement.
Typical applications include industrial sensor controllers, USB-connected data-acquisition equipment, compact human-machine interfaces, digital control modules, communications equipment, and low-power embedded platforms. The 1 MB Flash capacity supports larger firmware images, while USB OTG, LCD support, and DFSD address common connectivity, display, and data-storage requirements without requiring several discrete interface controllers.
PCB planning must account for the 169-ball UFBGA geometry, high-density escape routing, via access, and thermal performance. Place decoupling capacitors close to the appropriate supply pins, preserve a continuous ground reference beneath the device where layout rules allow, and validate the complete stack-up and footprint against the manufacturer package drawing. Firmware and peripheral assignments should be confirmed through the STM32L496AG product documentation.
חלופות תחליף ישיר עבור STM32L496AGI3 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32L496AGI3 (אותו גורם צורה וטביעת רגל) — שונים ב Mounting Type, Package.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותSTM32L496AGI3 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 1 MB |
| Programmable Memory Organization | 1M x 8 bits |
| מתח אספקה פעיל | 3.3 V |
| Architecture | 32-bit RISC |
| USB Support | USB OTG |
| Display Support | LCD interface |
| Data Storage Support | DFSD |
| מארז | 169-UFBGA (7 x 7 mm) |
| סוג הרכבה | Surface mount |
| Component Type | Microcontroller IC |
| Program Memory Type | Flash |
| Core Architecture | Arm Cortex-M4 |
| Temperature Grade Code | I3 grade |
מדריך תצורת פינים של STM32L496AGI3 169-ufbga (7 x 7 mm)
תצורת פינים עבור STM32L496AGI3 (מארזת 169-ufbga (7 x 7 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32L496AGI3.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32L496AGI3 מתאים עבור 6 יישוםs: Industrial Sensor and Condition Monitoring, USB Data-Acquisition Equipment, Compact Human-Machine Interfaces, Communications and Network Interface Modules, Digital Motor and Process Control, Portable and Battery-Powered Embedded Devices.
Industrial Sensor and Condition Monitoring
The STM32L496AGI3 fits compact condition-monitoring controllers because its Arm Cortex-M4 core operates up to 80 MHz while providing 1 MB of Flash for signal-processing code, filtering routines, communication stacks, and local data logging. The integrated floating-point unit is useful when conditioning sensor measurements or executing control calculations. Its ultra-low-power positioning also supports battery-assisted or energy-conscious industrial monitoring. Designers should place bypass capacitors close to each supply group, maintain continuous ground-return paths, and budget for the 169-UFBGA escape-routing density. DFSD capability can expand local storage options, while the LCD interface permits local status displays on portable instrumentation.
מומלץ
USB Data-Acquisition Equipment
The STM32L496AGI3 is suitable for USB-connected data-acquisition equipment because USB OTG is integrated into a microcontroller that also operates up to 80 MHz and includes 1 MB of Flash. Engineers can use the additional processing bandwidth for buffering, digital filtering, protocol handling, and control logic rather than relying on a simple data-transfer function. The 169-UFBGA package reduces board area but requires careful high-speed USB routing, continuous reference planes, and controlled impedance. Validate the complete USB topology, power supply behavior, and connector implementation against the manufacturer documentation and applicable interface requirements before production release.
מומלץ
Compact Human-Machine Interfaces
The STM32L496AGI3 fits compact human-machine interfaces because it combines an 80 MHz Cortex-M4 core, 1 MB of Flash, and LCD support in a single 169-UFBGA package. The floating-point unit supports responsive graphical and control calculations, while 1 MB of Flash can accommodate a substantial interface application and supporting protocol logic. The LCD interface reduces the need for a separate display controller in suitable designs. Engineers should budget display-bus timing, panel-specific power sequencing, and backlight control carefully. Because the package is dense, fanout and via-in-pad decisions should follow the manufacturer land pattern and the display module’s mechanical constraints.
מומלץ
Communications and Network Interface Modules
The STM32L496AGI3 can serve as the main controller in communications modules because its 80 MHz Cortex-M4 core and 1 MB of Flash provide resources for protocol handling, data framing, routing logic, and supervisory functions. USB OTG adds a direct host or device option, while the floating-point unit can accelerate data-intensive routines. The same package is useful for dense modules where connector and memory placement are constrained. Designers should separate analog and digital return paths, provide local decoupling for communication transceivers, and keep high-speed routes away from sensitive LCD or sensor inputs. Confirm transceiver timing, impedance, isolation, and power requirements independently of the microcontroller selection.
מומלץ
Digital Motor and Process Control
The STM32L496AGI3 is well suited to compact digital-control modules because its 80 MHz 32-bit Cortex-M4 core can service multiple control loops and communications tasks, while the FPU supports proportional, integral, derivative, filtering, and transform calculations. Its 1 MB of Flash accommodates control software, diagnostics, and communication stacks. Ultra-low-power characteristics are valuable in equipment that spends substantial time idle or in reduced-activity operating states. Timing-critical outputs still require careful peripheral configuration and pin planning. Validate PWM behavior, timer channels, analog front-end isolation, thermal margins, and fault-safe shutdown paths with the complete motor or process-control subsystem.
מומלץ
Portable and Battery-Powered Embedded Devices
The STM32L496AGI3 fits portable embedded devices because its ultra-low-power MCU architecture combines an 80 MHz Cortex-M4 core, 1 MB of Flash, and USB OTG without requiring a separate host processor. That combination supports responsive user interaction, local control, data transfer, and display functions in a compact assembly. The 169-UFBGA package helps minimize board area, although assembly complexity and layout density increase. Battery-powered designs should select capacitors and supporting circuitry with appropriate leakage characteristics, measure sleep-mode behavior in the finished system, and account for regulator efficiency and quiescent current. USB power states and battery transitions must be tested across the complete operating range.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32L496AGI3 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
מבדילים עיקריים
- Combines 80 MHz Cortex-M4 processing with 1 MB of Flash (לעומתSTM32L496RGT6)
- Integrated USB OTG, LCD, and DFSD support (לעומתSTM32L496RGT6)
- Floating-point-enabled 32-bit control platform (לעומתSTM32G031J6M6TR)
- Space-efficient 7 mm by 7 mm package (לעומתSTM32L496RGT6)
הערות תכנון
Treat the 169-UFBGA land pattern as a high-density routing problem. Assign escape vias before placing the BGA footprint, keep via fields away from solderable ball locations where assembly capability is limited, and route supply connections on multiple layers where practical. Validate the footprint, solder-mask definition, and assembly process against the current manufacturer package drawing rather than scaling a generic 169-ball footprint.
Place the required bypass capacitors directly beside their associated package supply pins and maintain a low-impedance ground return. Separate noisy digital switching paths from sensitive analog inputs when the board also supports sensors or communication transceivers. Check the 3.3 V operating supply against the complete design, including voltage tolerance, sequencing, startup behavior, and regulator headroom across the selected operating temperature range.
Power-loss and thermal-rise analysis should use the actual operating frequency, voltage, and I/O loading of the finished board. A compact UFBGA can depend heavily on its PCB thermal design for heat spreading, so maximize useful copper area without compromising routing. Use the manufacturer thermal model for the exact package and stack-up where applicable, and verify the hottest expected operating condition rather than relying only on ambient-temperature estimates.
Do not substitute a different STM32L496 orderable code solely because it has the same core and memory. The STM32L496AGI3 suffix identifies a specific 169-UFBGA configuration, and package changes can alter pin count, exposed connections, assembly requirements, and peripheral mapping. For any proposed replacement, verify the exact pinout, supply pins, ground connections, boot behavior, clock pins, and PCB land pattern before approving a drop-in claim.
מידע על תאימות
No specific environmental or automotive compliance declarations were identified for the exact ordering code in the cited product pages.