STM32L4A6RGT7 - 80MHz 1MB Ultra-Low-Power MCU | ST
MPN: STM32L4A6RGT7 ✓ Hoạt độngSTM32L4A6RGT7 Tóm tắt
An ultra-low-power microcontroller is a semiconductor that balances processing capability with energy efficiency. The STM32L4 family sits within the hierarchy of embedded processor, microcontroller, 32-bit RISC processor, and Arm Cortex-M microcontroller. This combination makes the STM32L4A6RGT7 suitable for battery-powered equipment, connected sensors, industrial controllers, and human-interface systems where both code density and low standby consumption are important.
Key features include an Arm Cortex-M4 processor operating at 80 MHz, 1 MB of Flash, 320 KB of RAM, and 32-bit processing. The manufacturer listing also identifies USB OTG, LCD support, and AES hardware capability. These features reduce the need for external USB controllers, display interface circuitry, or software-based encryption in suitable designs. The 64-LQFP package provides a conventional leaded surface-mount format that is easier to inspect and assemble than a very fine-pitch package.
The STM32L4A6RG device family combines a performance-oriented Cortex-M4 core with ultra-low-power positioning. Its 80 MHz operating point provides useful performance for protocol handling, local control, data acquisition, and user-interface logic. The 1 MB Flash capacity allows embedded applications to retain code, configuration data, and firmware update logic on the MCU itself, while 320 KB of RAM supports buffers and working data.
Typical applications include low-power sensor nodes, industrial automation modules, USB-connected equipment, LCD-based control panels, and secure embedded controllers. AES acceleration is especially relevant when firmware must protect stored or transmitted information. For designs using a display, the LCD capability can simplify the connection between the MCU and a supported panel, although the complete electrical interface must follow the manufacturer reference documentation.
When laying out the PCB, place decoupling capacitors close to the supply and ground pins, preserve the LQFP-64 land pattern, and route high-speed or sensitive signals away from switching nodes. Firmware validation should include the intended clock configuration, USB operating mode, display timing, and low-power transitions because peripheral behavior can vary with voltage and clock settings.
This product overview combines manufacturer device information with practical package, sourcing, comparison, and design guidance. It highlights the verified 80 MHz Cortex-M4 performance, 1 MB Flash, 320 KB RAM, USB OTG, LCD, and AES features while helping engineers evaluate whether the 64-LQFP STM32L4A6RGT7 fits their PCB, firmware, and application requirements.
Bộ thay thế dễ dàng lắp đặt cho STM32L4A6RGT7 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L4A6RGT7 (cùng hình factor và footprint) — khác nhau ở Package, Flash Memory, ADC, Shutdown Mode Current.
STM32L4A6RGT6
✅ Drop-In✓ Còn hàng
$9.56 / Đơn vị
Xem tài liệu →STM32L4A6RGT6P
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L4A6RGT6TR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L496RGT6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32L496RGT6P
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L4A6RGT7 Tỷ lệ tối đa & tính chất điện
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 1 MB (1M x 8) |
| RAM | 320 KB |
| Hộp | 64-LQFP (10 mm x 10 mm) |
| Kiểu lắp đặt | Surface mount |
| USB Capability | USB OTG |
| Display Support | LCD support |
| Security Feature | AES hardware capability |
| Floating-Point Unit | FPU |
Hướng dẫn cấu hình chân STM32L4A6RGT7 64-lqfp (10 mm x 10 mm)
Cấu hình chân cho STM32L4A6RGT7 (64-lqfp (10 mm x 10 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L4A6RGT7.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L4A6RGT7 phù hợp cho 6 Áp dụngs: Low-Power Sensor Controller, Industrial Automation Module, USB OTG Connected Accessory, LCD-Based Control Panel, Secure Embedded Controller, Battery-Powered Data Logger.
Low-Power Sensor Controller
The STM32L4A6RGT7 fits low-power sensor controllers that need more than basic GPIO processing but also benefit from an efficient Arm Cortex-M4 architecture. Its 80 MHz maximum clock and 1 MB of Flash provide room for sampling logic, local filtering, communication protocols, and firmware updates, while 320 KB of RAM accommodates working buffers. The MCU is placed beside the sensor circuitry and performs acquisition, threshold evaluation, and data preparation before transmitting results. Its ultra-low-power positioning is useful for battery-operated nodes, although the selected sensor's standby current and the final power-management strategy determine overall system life.
Được đề xuất
Industrial Automation Module
The STM32L4A6RGT7 is suitable for compact industrial automation modules that combine control logic, status monitoring, and communications in one device. An 80 MHz Cortex-M4 core can handle protocol servicing and deterministic control tasks, while 1 MB of Flash supports a larger embedded application than many basic MCUs. The 64-LQFP package is appropriate for automated assembly and inspection. In an industrial design, the MCU should be paired with proper isolation, surge protection, and conditioned sensor inputs because the package and operating characteristics alone do not determine compliance with the final end-equipment standard.
Được đề xuất
USB OTG Connected Accessory
The STM32L4A6RGT7 can serve as the central controller in a USB-connected accessory because the listed device includes USB OTG alongside an 80 MHz Arm Cortex-M4 core. Engineers can implement USB device functions, configuration handling, and application firmware while retaining 1 MB of Flash for protocol code and 320 KB of RAM for transfer buffers. Layout must account for controlled-impedance USB routing and correct decoupling, while firmware should validate enumeration, suspend, resume, and bus-powered operating scenarios. USB OTG capability makes the MCU suitable for a broader range of portable peripherals and configuration tools.
Được đề xuất
LCD-Based Control Panel
The STM32L4A6RGT7 is well matched to an LCD-based control panel because the manufacturer listing identifies LCD support, USB OTG, and AES hardware capability. The Cortex-M4 core can process user input, update the display, maintain device state, and handle encrypted service connections, while 1 MB of Flash provides room for a graphics-oriented firmware stack and configuration data. The 320 KB RAM budget supports display and input buffers, but panel size, refresh rate, and controller memory requirements should be checked before finalizing the MCU selection. A separate display driver may still be required depending on the panel interface.
Được đề xuất
Secure Embedded Controller
The STM32L4A6RGT7 can support secure embedded-control functions because the listed feature set includes AES hardware capability alongside an 80 MHz Cortex-M4 core. Hardware-assisted encryption reduces processor workload when protecting firmware, configuration records, or communication data, while the 1 MB of Flash provides room for authenticated update logic and application code. Secure deployment still requires correct key provisioning, boot configuration, debug-access policy, and update-state handling. The MCU's security features should be treated as implementation components rather than a complete product security guarantee.
Được đề xuất
Battery-Powered Data Logger
The STM32L4A6RGT7 fits battery-powered data loggers that must store application code locally while periodically collecting and transmitting measurements. Its 1 MB Flash can retain firmware, event definitions, calibration tables, and buffered records, and the 320 KB RAM provides room for active sampling batches. The ultra-low-power STM32L4 positioning is valuable when the MCU spends most of its time in a low-energy state, although external load switches, sensor standby modes, and regulator quiescent current will dominate total power. Validate wake sources and retention behavior for the intended logging interval.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L4A6RGT7 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L4A6RGT6 | STM32L4A6RGT6P | STM32L4A6RGT6TR | STM32L496RGT6 | STM32L496RGT6P |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| Architecture | 32-bit RISC | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Temperature Grade | Grade 7 suffix | Grade 6 suffix | Grade 6 and P suffixes | Grade 6 and TR suffixes | Grade 6 suffix | Grade 6 and P suffixes |
| Product Family | STM32L4A6 | STM32L4A6 | STM32L4A6 | STM32L4A6 | STM32L496 | STM32L496 |
Bảo phân biệt quan trọng
- Exact 80 MHz Cortex-M4 and 1 MB Flash configuration in a 64-LQFP package (vsSTM32L496RGT6)
- Final ordering suffix aligned with Grade 7 (vsSTM32L4A6RGT6)
- Integrated USB OTG, LCD support, and AES hardware capability (vsSTM32L4A6RGT6P)
- Substantial memory for firmware and working memory for embedded control (vsSTM32L496RGT6P)
Ghi chú thiết kế
Preserve the manufacturer's 64-LQFP, 10 mm by 10 mm land pattern and follow the pin table for power, ground, oscillator, boot, and debug assignments. Place every required decoupling capacitor directly beside its associated supply pins, and provide a low-impedance ground plane without splits beneath high-speed or USB nets. Verify the final footprint against the manufacturer package drawing rather than relying only on the generic LQFP-64 dimensions.
Budget the device's power rails against the complete operating mode, including an 80 MHz active state, USB activity, LCD updates, and any enabled security functions. Decoupling capacitance, placement, and regulator stability must follow the relevant STMicroelectronics application guidance. For battery designs, measure the MCU, analog peripherals, sensors, pull networks, and regulator together; reducing only the MCU supply current will not establish the system's final energy budget.
Do not treat a shared LQFP-64 outline as proof of drop-in compatibility. When moving from STM32L4A6RGT7 to an STM32L4A6RGT6, RGT6P, RGT6TR, STM32L496RGT6, or STM32L496RGT6P candidate, compare the exact pin table, alternate-function mapping, power pins, boot behavior, clock limits, peripheral inventory, temperature grade, and firmware support. Reuse the PCB only after those checks and the required hardware and firmware regression tests pass.
If USB OTG is used, route the USB data pair as a controlled-impedance differential pair with continuous reference-plane support and minimize via transitions. Keep high-current switching nodes and inductors away from the Cortex-M4 support circuitry, ADC inputs, oscillator paths, and LCD interfaces. Where a crystal is used, follow the manufacturer's recommended grounding and load-capacitor arrangement to reduce startup failures and timing sensitivity.
The AES and USB features should be validated as part of the complete firmware and board design. Confirm key provisioning, boot configuration, USB enumeration behavior, suspend and resume timing, and protection of firmware update paths. A hardware accelerator can reduce processing time, but it does not replace correct key management, authenticated update procedures, or application-level access controls.
Thông tin tuân thủ
Compliance status requires confirmation from the exact STM32L4A6RGT7 manufacturer product documentation and ordering declaration.