STM32L4A6RGT7 - 80MHz 1MB Ultra-Low-Power MCU | ST
MPN: STM32L4A6RGT7 ✓ 啟用中STM32L4A6RGT7 概覽
An ultra-low-power microcontroller is a semiconductor that balances processing capability with energy efficiency. The STM32L4 family sits within the hierarchy of embedded processor, microcontroller, 32-bit RISC processor, and Arm Cortex-M microcontroller. This combination makes the STM32L4A6RGT7 suitable for battery-powered equipment, connected sensors, industrial controllers, and human-interface systems where both code density and low standby consumption are important.
Key features include an Arm Cortex-M4 processor operating at 80 MHz, 1 MB of Flash, 320 KB of RAM, and 32-bit processing. The manufacturer listing also identifies USB OTG, LCD support, and AES hardware capability. These features reduce the need for external USB controllers, display interface circuitry, or software-based encryption in suitable designs. The 64-LQFP package provides a conventional leaded surface-mount format that is easier to inspect and assemble than a very fine-pitch package.
The STM32L4A6RG device family combines a performance-oriented Cortex-M4 core with ultra-low-power positioning. Its 80 MHz operating point provides useful performance for protocol handling, local control, data acquisition, and user-interface logic. The 1 MB Flash capacity allows embedded applications to retain code, configuration data, and firmware update logic on the MCU itself, while 320 KB of RAM supports buffers and working data.
Typical applications include low-power sensor nodes, industrial automation modules, USB-connected equipment, LCD-based control panels, and secure embedded controllers. AES acceleration is especially relevant when firmware must protect stored or transmitted information. For designs using a display, the LCD capability can simplify the connection between the MCU and a supported panel, although the complete electrical interface must follow the manufacturer reference documentation.
When laying out the PCB, place decoupling capacitors close to the supply and ground pins, preserve the LQFP-64 land pattern, and route high-speed or sensitive signals away from switching nodes. Firmware validation should include the intended clock configuration, USB operating mode, display timing, and low-power transitions because peripheral behavior can vary with voltage and clock settings.
This product overview combines manufacturer device information with practical package, sourcing, comparison, and design guidance. It highlights the verified 80 MHz Cortex-M4 performance, 1 MB Flash, 320 KB RAM, USB OTG, LCD, and AES features while helping engineers evaluate whether the 64-LQFP STM32L4A6RGT7 fits their PCB, firmware, and application requirements.
直接替換替代品,適用於 STM32L4A6RGT7 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L4A6RGT7 (相同外形與佔位) — 差異在於 Package, Flash Memory, ADC, Shutdown Mode Current.
STM32L4A6RGT6
✅ 直接替換✓ 有庫存
$9.56 / 單位
查看資料表 →STM32L4A6RGT6P
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L4A6RGT6TR
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L496RGT6
✅ 直接替換聯絡詢價
查看資料表 →STM32L496RGT6P
✅ 直接替換📋 參考替代品(不在目錄中)
STM32L4A6RGT7 最大額定值與電氣特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 1 MB (1M x 8) |
| RAM | 320 KB |
| 封裝 | 64-LQFP (10 mm x 10 mm) |
| 安裝類型 | Surface mount |
| USB Capability | USB OTG |
| Display Support | LCD support |
| Security Feature | AES hardware capability |
| Floating-Point Unit | FPU |
STM32L4A6RGT7 64-lqfp (10 mm x 10 mm) 腳位配置指南
STM32L4A6RGT7(64-lqfp (10 mm x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L4A6RGT7.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L4A6RGT7 適用於 6 應用s: Low-Power Sensor Controller, Industrial Automation Module, USB OTG Connected Accessory, LCD-Based Control Panel, Secure Embedded Controller, Battery-Powered Data Logger.
Low-Power Sensor Controller
The STM32L4A6RGT7 fits low-power sensor controllers that need more than basic GPIO processing but also benefit from an efficient Arm Cortex-M4 architecture. Its 80 MHz maximum clock and 1 MB of Flash provide room for sampling logic, local filtering, communication protocols, and firmware updates, while 320 KB of RAM accommodates working buffers. The MCU is placed beside the sensor circuitry and performs acquisition, threshold evaluation, and data preparation before transmitting results. Its ultra-low-power positioning is useful for battery-operated nodes, although the selected sensor's standby current and the final power-management strategy determine overall system life.
推薦
Industrial Automation Module
The STM32L4A6RGT7 is suitable for compact industrial automation modules that combine control logic, status monitoring, and communications in one device. An 80 MHz Cortex-M4 core can handle protocol servicing and deterministic control tasks, while 1 MB of Flash supports a larger embedded application than many basic MCUs. The 64-LQFP package is appropriate for automated assembly and inspection. In an industrial design, the MCU should be paired with proper isolation, surge protection, and conditioned sensor inputs because the package and operating characteristics alone do not determine compliance with the final end-equipment standard.
推薦
USB OTG Connected Accessory
The STM32L4A6RGT7 can serve as the central controller in a USB-connected accessory because the listed device includes USB OTG alongside an 80 MHz Arm Cortex-M4 core. Engineers can implement USB device functions, configuration handling, and application firmware while retaining 1 MB of Flash for protocol code and 320 KB of RAM for transfer buffers. Layout must account for controlled-impedance USB routing and correct decoupling, while firmware should validate enumeration, suspend, resume, and bus-powered operating scenarios. USB OTG capability makes the MCU suitable for a broader range of portable peripherals and configuration tools.
推薦
LCD-Based Control Panel
The STM32L4A6RGT7 is well matched to an LCD-based control panel because the manufacturer listing identifies LCD support, USB OTG, and AES hardware capability. The Cortex-M4 core can process user input, update the display, maintain device state, and handle encrypted service connections, while 1 MB of Flash provides room for a graphics-oriented firmware stack and configuration data. The 320 KB RAM budget supports display and input buffers, but panel size, refresh rate, and controller memory requirements should be checked before finalizing the MCU selection. A separate display driver may still be required depending on the panel interface.
推薦
Secure Embedded Controller
The STM32L4A6RGT7 can support secure embedded-control functions because the listed feature set includes AES hardware capability alongside an 80 MHz Cortex-M4 core. Hardware-assisted encryption reduces processor workload when protecting firmware, configuration records, or communication data, while the 1 MB of Flash provides room for authenticated update logic and application code. Secure deployment still requires correct key provisioning, boot configuration, debug-access policy, and update-state handling. The MCU's security features should be treated as implementation components rather than a complete product security guarantee.
推薦
Battery-Powered Data Logger
The STM32L4A6RGT7 fits battery-powered data loggers that must store application code locally while periodically collecting and transmitting measurements. Its 1 MB Flash can retain firmware, event definitions, calibration tables, and buffered records, and the 320 KB RAM provides room for active sampling batches. The ultra-low-power STM32L4 positioning is valuable when the MCU spends most of its time in a low-energy state, although external load switches, sensor standby modes, and regulator quiescent current will dominate total power. Validate wake sources and retention behavior for the intended logging interval.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L4A6RGT7 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L4A6RGT6 | STM32L4A6RGT6P | STM32L4A6RGT6TR | STM32L496RGT6 | STM32L496RGT6P |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| Architecture | 32-bit RISC | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Temperature Grade | Grade 7 suffix | Grade 6 suffix | Grade 6 and P suffixes | Grade 6 and TR suffixes | Grade 6 suffix | Grade 6 and P suffixes |
| Product Family | STM32L4A6 | STM32L4A6 | STM32L4A6 | STM32L4A6 | STM32L496 | STM32L496 |
主要差異化特點
- Exact 80 MHz Cortex-M4 and 1 MB Flash configuration in a 64-LQFP package (對比STM32L496RGT6)
- Final ordering suffix aligned with Grade 7 (對比STM32L4A6RGT6)
- Integrated USB OTG, LCD support, and AES hardware capability (對比STM32L4A6RGT6P)
- Substantial memory for firmware and working memory for embedded control (對比STM32L496RGT6P)
設計說明
Preserve the manufacturer's 64-LQFP, 10 mm by 10 mm land pattern and follow the pin table for power, ground, oscillator, boot, and debug assignments. Place every required decoupling capacitor directly beside its associated supply pins, and provide a low-impedance ground plane without splits beneath high-speed or USB nets. Verify the final footprint against the manufacturer package drawing rather than relying only on the generic LQFP-64 dimensions.
Budget the device's power rails against the complete operating mode, including an 80 MHz active state, USB activity, LCD updates, and any enabled security functions. Decoupling capacitance, placement, and regulator stability must follow the relevant STMicroelectronics application guidance. For battery designs, measure the MCU, analog peripherals, sensors, pull networks, and regulator together; reducing only the MCU supply current will not establish the system's final energy budget.
Do not treat a shared LQFP-64 outline as proof of drop-in compatibility. When moving from STM32L4A6RGT7 to an STM32L4A6RGT6, RGT6P, RGT6TR, STM32L496RGT6, or STM32L496RGT6P candidate, compare the exact pin table, alternate-function mapping, power pins, boot behavior, clock limits, peripheral inventory, temperature grade, and firmware support. Reuse the PCB only after those checks and the required hardware and firmware regression tests pass.
If USB OTG is used, route the USB data pair as a controlled-impedance differential pair with continuous reference-plane support and minimize via transitions. Keep high-current switching nodes and inductors away from the Cortex-M4 support circuitry, ADC inputs, oscillator paths, and LCD interfaces. Where a crystal is used, follow the manufacturer's recommended grounding and load-capacitor arrangement to reduce startup failures and timing sensitivity.
The AES and USB features should be validated as part of the complete firmware and board design. Confirm key provisioning, boot configuration, USB enumeration behavior, suspend and resume timing, and protection of firmware update paths. A hardware accelerator can reduce processing time, but it does not replace correct key management, authenticated update procedures, or application-level access controls.
合規資訊
Compliance status requires confirmation from the exact STM32L4A6RGT7 manufacturer product documentation and ordering declaration.