SY89829UHI - 2:10 2GHz LVPECL Clock Driver | Microchip
MPN: SY89829UHI ✓ Hoạt độngSY89829UHI Tóm tắt
A clock driver is a timing-interface semiconductor that receives a high-speed differential clock and generates multiple buffered outputs. The SY89829UHI belongs to the clock buffer and driver hierarchy, combining a 2:1 input multiplexer, redundant switchover, internal termination, and differential clock distribution in one device. This integration supports clock redundancy in communication, industrial, and computing systems.
Key features include two independent clock-driver circuits, a 2:10 output ratio per circuit, 2 GHz operating performance, and support for 2.5 V or 3.3 V operation. Internal termination reduces the need for separate termination components when the device is used with compatible LVPECL interfaces. The 2:1 multiplexer allows a system to select between two clock sources for redundancy or source switching.
Technically, the SY89829UHI is designed for LVPECL clock distribution where differential signaling, high fanout, and controlled source impedance are important. Its exposed thermal pad provides a direct heat-transfer path from the device to the PCB copper plane. Because the package contains 64 leads, correct land-pattern placement and thermal-pad assembly are essential for reliable operation.
Typical applications include redundant clock routing for communications equipment, high-speed backplane clock distribution, server and networking clock trees, industrial control systems, FPGA clock distribution, and test-and-measurement instrumentation. The device is especially useful where a design needs multiple LVPECL outputs and selectable input clocks.
When laying out a board using the SY89829UHI, use the manufacturer pin description and land pattern for every connection, maintain short differential clock routes, and provide a continuous ground reference beneath the exposed pad. Account for output-device and receiver loading when validating edge rate, return loss, and fanout margin.
This product page combines the SY89829UHI operating characteristics, package details, sourcing guidance, and drop-in replacement information. It also provides practical design notes and parameter comparisons that help engineers evaluate clock distribution, redundancy, thermal management, and PCB implementation requirements.
Bộ thay thế dễ dàng lắp đặt cho SY89829UHI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SY89829UHI (cùng hình factor và footprint) — khác nhau ở Package, Product Type.
SY89829UHY
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SY89829UHI Thông số kỹ thuật
| Product Type | Clock Fanout Buffer and Multiplexer IC |
| Clock Driver Configuration | Dual 1:10 |
| Circuit Count | 2 circuits |
| Input Multiplexing Ratio | 2:1 |
| Output Fanout Ratio | 2:10 |
| Tần số xung maksimum | 2 GHz |
| Điện áp cung cấp | 2.5 V or 3.3 V |
| Logic Standard | LVPECL |
| Internal Termination | Yes |
| Redundant Switchover | Yes |
| Hộp | 64-TQFP with exposed pad |
| Số chân | 64 pins |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân SY89829UHI 64-tqfp with exposed pad
Cấu hình chân cho SY89829UHI (64-tqfp with exposed pad gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SY89829UHI.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SY89829UHI phù hợp cho 6 Áp dụngs: Redundant Communication Clock Distribution, FPGA Clock Trees, High-Speed Backplane Clocking, Industrial Control and Data Acquisition, Server and Network Equipment, Test and Measurement Instrumentation.
Redundant Communication Clock Distribution
The SY89829UHI fits communication systems that must distribute a selected differential clock across multiple high-speed loads. Its dual 1:10 LVPECL driver circuits, 2:1 input multiplexer, and redundant switchover support clock-source selection without relying on a separate mux stage. Operation up to 2 GHz suits high-speed line cards and backplane clock trees, while the internal termination helps simplify compatible LVPECL interfaces. Designers should verify switchover timing, source phase relationship, and loss-of-clock behavior against the system clocking specification.
Được đề xuất
FPGA Clock Trees
The SY89829UHI can serve as a fanout stage in FPGA-based clock trees where one selected reference must reach multiple clock regions. The 2:10 device-level fanout reduces buffer depth, and the 2 GHz operating limit accommodates demanding serial, network, and signal-processing designs. Internal termination supports compatible LVPECL links when the PCB and downstream receivers are characterized correctly. Before placement, confirm FPGA clock-input thresholds, trace length behavior, and whether the clock manager requires a specific source arrangement.
Được đề xuất
High-Speed Backplane Clocking
The SY89829UHI is appropriate for backplane clock distribution where one LVPECL source must feed multiple endpoints across a controlled board environment. Its dual 1:10 architecture provides substantial fanout, and the 2 GHz specification supports demanding digital backplanes. Differential routing and internal termination can simplify endpoint interfaces, but insertion loss, connector transitions, and reflection behavior must be evaluated together. Maintain continuous reference planes and use the manufacturer package layout to preserve thermal and signal-return continuity.
Được đề xuất
Industrial Control and Data Acquisition
The SY89829UHI can support high-speed clock distribution in industrial control, data-acquisition, and automated test systems. Its selectable input paths help implement source redundancy, while the dual-driver organization supports parallel clock trees for converters, counters, and digital logic. The 2.5 V or 3.3 V operating options align with compact control electronics, and operation up to 2 GHz provides margin for demanding timing chains. System designers should isolate noisy analog sections and validate common-mode and noise performance in the completed assembly.
Được đề xuất
Server and Network Equipment
The SY89829UHI addresses clock-fanout requirements in servers, routers, and switching equipment where a stable differential reference must reach multiple subsystems. The dual 1:10 driver configuration provides local fanout, and the 2:1 multiplexer supports selectable sources for redundancy. Its 2 GHz capability is suitable for high-speed digital clocking architectures, while internal termination simplifies compatible LVPECL endpoints. The layout must preserve controlled impedance and pair symmetry, and the power design should provide low-noise, decoupled supply connections.
Được đề xuất
Test and Measurement Instrumentation
The SY89829UHI can provide a selectable, high-fanout clock source for test and measurement instrumentation that synchronizes multiple converters, counters, or digital channels. The dual LVPECL driver architecture and 2 GHz operating capability support fast test-clock distribution, while internal termination reduces termination complexity in compatible networks. Because measurement accuracy can be affected by clock jitter, skew, and reflection, engineers should characterize the complete fixture and cable path rather than relying only on nominal device frequency.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SY89829UHI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SY89829UHY |
|---|---|---|
| Package | 64-TQFP with exposed pad | 64-TQFP with exposed pad |
| Brand | Microchip Technology | Microchip Technology |
| Clock Driver Configuration | Dual 1:10 | Dual 1:10 |
| Maximum Clock Frequency | 2 GHz | 2 GHz |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Logic Standard | LVPECL | LVPECL |
| Input Multiplexing Ratio | 2:1 | 2:1 |
| Internal Termination | Yes | Yes |
| Redundant Switchover | Yes | Yes |
Bảo phân biệt quan trọng
- Matched high-speed clock-driver characteristics (vsSY89829UHY)
- Integrated redundant-clock control (vsSY89829UHY)
- Compatible LVPECL interface implementation (vsSY89829UHY)
Ghi chú thiết kế
Use the manufacturer's 64-TQFP exposed-pad land pattern and pin table as the authority for PCB implementation. Preserve differential pair symmetry and a continuous ground reference beneath the clock routes. Place bypass capacitors at the device's supply pins according to the datasheet guidance and keep the exposed-pad connection continuous with the ground plane to maintain both signal return and thermal performance.
Treat every LVPECL route as a controlled-impedance transmission line rather than a general-purpose logic trace. Match differential impedance to the board stack-up, minimize branch stubs, and maintain consistent spacing from other high-speed signals. The 2 GHz operating capability leaves no margin for careless transitions, so connector and test-point geometry should be included in the signal-integrity simulation.
Bond the exposed pad to a continuous PCB ground plane and follow the manufacturer's solder-paste and assembly guidance for void control. Estimated: the device's actual dissipation depends on supply voltage, output loading, switching activity, and ambient temperature; calculate those values from the operating condition and confirm junction-temperature margin using the manufacturer thermal characterization. Do not use an assumed thermal figure for production qualification.
Do not assume that internal termination removes the need to characterize the entire link. Account for source impedance, receiver termination, loss from connectors and traces, and the effects of unused outputs. For redundant-clock operation, define switchover timing and phase behavior in the system specification, then verify that the selected clock source remains valid during the transition.
Thông tin tuân thủ
The product pages and indexed datasheet descriptions do not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the current manufacturer product documentation.